Add a reset_intf_cfg operation for dpu_hw_ctl to reset the entire CTL path by disabling each component namely layer mixer, 3d-merge and interface blocks.
changes in v3: - none
Signed-off-by: Abhinav Kumar quic_abhinavk@quicinc.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 32 ++++++++++++++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 8 ++++++++ 2 files changed, 40 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c index dc27579..524f024 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c @@ -563,6 +563,37 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx, DPU_REG_WRITE(c, CTL_TOP, intf_cfg); }
+static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx, + struct dpu_hw_intf_cfg *cfg) +{ + struct dpu_hw_blk_reg_map *c = &ctx->hw; + u32 intf_active = 0; + u32 merge3d_active = 0; + + /* + * This API resets each portion of the CTL path namely, + * clearing the sspps staged on the lm, merge_3d block, + * interfaces etc to ensure clean teardown of the pipeline. + * This will be used for writeback to begin with to have a + * proper teardown of the writeback session but upon further + * validation, this can be extended to all interfaces. + */ + if (cfg->merge_3d) { + merge3d_active = DPU_REG_READ(c, CTL_MERGE_3D_ACTIVE); + merge3d_active &= ~BIT(cfg->merge_3d - MERGE_3D_0); + DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, + merge3d_active); + } + + dpu_hw_ctl_clear_all_blendstages(ctx); + + if (cfg->intf) { + intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE); + intf_active &= ~BIT(cfg->intf - INTF_0); + DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active); + } +} + static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx, unsigned long *fetch_active) { @@ -586,6 +617,7 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops, if (cap & BIT(DPU_CTL_ACTIVE_CFG)) { ops->trigger_flush = dpu_hw_ctl_trigger_flush_v1; ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg_v1; + ops->reset_intf_cfg = dpu_hw_ctl_reset_intf_cfg_v1; ops->update_pending_flush_intf = dpu_hw_ctl_update_pending_flush_intf_v1; ops->update_pending_flush_merge_3d = diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h index 97f326d..c61a8fd 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h @@ -140,6 +140,14 @@ struct dpu_hw_ctl_ops { void (*setup_intf_cfg)(struct dpu_hw_ctl *ctx, struct dpu_hw_intf_cfg *cfg);
+ /** + * reset ctl_path interface config + * @ctx : ctl path ctx pointer + * @cfg : interface config structure pointer + */ + void (*reset_intf_cfg)(struct dpu_hw_ctl *ctx, + struct dpu_hw_intf_cfg *cfg); + int (*reset)(struct dpu_hw_ctl *c);
/*