Change 'pixes' to 'pixels' Change 'enabel' to 'enable' Change 'enabeling' to 'enabling'
Signed-off-by: Yannick Guerrini yguerrini@tomshardware.fr --- drivers/gpu/drm/drm_modes.c | 4 ++-- drivers/gpu/drm/i2c/adv7511.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 487d0e3..2cca85f 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -278,7 +278,7 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, hblank = drm_mode->hdisplay * hblank_percentage / (100 * HV_FACTOR - hblank_percentage); hblank -= hblank % (2 * CVT_H_GRANULARITY); - /* 14. find the total pixes per line */ + /* 14. find the total pixels per line */ drm_mode->htotal = drm_mode->hdisplay + hblank; drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2; drm_mode->hsync_start = drm_mode->hsync_end - @@ -1209,7 +1209,7 @@ EXPORT_SYMBOL(drm_mode_connector_list_update); * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd] * * The intermediate drm_cmdline_mode structure is required to store additional - * options from the command line modline like the force-enabel/disable flag. + * options from the command line modline like the force-enable/disable flag. * * Returns: * True if a valid modeline has been parsed, false otherwise. diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c index fa140e0..61aa824 100644 --- a/drivers/gpu/drm/i2c/adv7511.c +++ b/drivers/gpu/drm/i2c/adv7511.c @@ -573,7 +573,7 @@ static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode) * goes low the adv7511 is reset and the outputs are disabled * which might cause the monitor to go to standby again. To * avoid this we ignore the HDP pin for the first few seconds - * after enabeling the output. + * after enabling the output. */ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, ADV7511_REG_POWER2_HDP_SRC_MASK,