Program EDP_PSR_DEBUG_CTL (PSR_MASK) to enable system to go to deep sleep while in psr2.PSR2_STATUS bit 31:28 should report value 8 , if system enters deep sleep state.
Also, EDP_FRAMES_BEFORE_SU_ENTRY is set 1 , if not set, flickering is observed on psr2 panel.
v2: (Ilia Mirkin) - Remove duplicate bit definition 25:27
v3: rebase
v4: rebase
Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: Jim Bride jim.bride@linux.intel.com Signed-off-by: Vathsala Nagaraju vathsala.nagaraju@intel.com Signed-off-by: Patil Deepti deepti.patil@intel.com Reviewed-by: Jim Bride jim.bride@linux.intel.com --- drivers/gpu/drm/i915/i915_reg.h | 10 +++++++--- drivers/gpu/drm/i915/intel_psr.c | 29 ++++++++++++++++++++--------- 2 files changed, 27 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5ca506a..272a283 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3597,9 +3597,12 @@ enum { #define EDP_PSR_PERF_CNT_MASK 0xffffff
#define EDP_PSR_DEBUG_CTL _MMIO(dev_priv->psr_mmio_base + 0x60) -#define EDP_PSR_DEBUG_MASK_LPSP (1<<27) -#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26) -#define EDP_PSR_DEBUG_MASK_HPD (1<<25) +#define EDP_PSR_DEBUG_MASK_MAX_SLEEP (1<<28) +#define EDP_PSR_DEBUG_MASK_LPSP (1<<27) +#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26) +#define EDP_PSR_DEBUG_MASK_HPD (1<<25) +#define EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (1<<16) +#define EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN (1<<15)
#define EDP_PSR2_CTL _MMIO(0x6f900) #define EDP_PSR2_ENABLE (1<<31) @@ -3614,6 +3617,7 @@ enum { #define EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4 #define EDP_PSR2_FRAME_BEFORE_SU_MASK (0xf<<4) #define EDP_PSR2_IDLE_MASK 0xf +#define EDP_FRAMES_BEFORE_SU_ENTRY (1<<4)
#define EDP_PSR2_STATUS_CTL _MMIO(0x6f940) #define EDP_PSR2_STATUS_STATE_MASK (0xf<<28) diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c index 7573c2f..fd151b9 100644 --- a/drivers/gpu/drm/i915/intel_psr.c +++ b/drivers/gpu/drm/i915/intel_psr.c @@ -338,7 +338,9 @@ static void intel_enable_source_psr2(struct intel_dp *intel_dp) /* FIXME: selective update is probably totally broken because it doesn't * mesh at all with our frontbuffer tracking. And the hw alone isn't * good enough. */ - val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE; + val |= EDP_PSR2_ENABLE | + EDP_SU_TRACK_ENABLE | + EDP_FRAMES_BEFORE_SU_ENTRY;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5) val |= EDP_PSR2_TP2_TIME_2500; @@ -511,18 +513,27 @@ void intel_psr_enable(struct intel_dp *intel_dp) if (dev_priv->psr.y_cord_support) chicken_trans |= CHICKEN_TRANS_BIT15; I915_WRITE(CHICKEN_TRANS(TRANS_EDP), chicken_trans); + I915_WRITE(EDP_PSR_DEBUG_CTL, + EDP_PSR_DEBUG_MASK_MEMUP | + EDP_PSR_DEBUG_MASK_HPD | + EDP_PSR_DEBUG_MASK_LPSP | + EDP_PSR_DEBUG_MASK_MAX_SLEEP | + EDP_PSR_DEBUG_MASK_DISP_REG_WRITE); } else { /* set up vsc header for psr1 */ hsw_psr_setup_vsc(intel_dp); + /* + * Per Spec: Avoid continuous PSR exit by masking MEMUP + * and HPD. also mask LPSP to avoid dependency on other + * drivers that might block runtime_pm besides + * preventing other hw tracking issues now we can rely + * on frontbuffer tracking. + */ + I915_WRITE(EDP_PSR_DEBUG_CTL, + EDP_PSR_DEBUG_MASK_MEMUP | + EDP_PSR_DEBUG_MASK_HPD | + EDP_PSR_DEBUG_MASK_LPSP); } - /* - * Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD. - * Also mask LPSP to avoid dependency on other drivers that - * might block runtime_pm besides preventing other hw tracking - * issues now we can rely on frontbuffer tracking. - */ - I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP | - EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
/* Enable PSR on the panel */ hsw_psr_enable_sink(intel_dp);