On 07/07/2020 17:45, Dennis YC Hsieh wrote:
add write_s_mask function in cmdq helper functions which writes value contains in internal register to address with mask and large dma access support.
Signed-off-by: Dennis YC Hsieh dennis-yc.hsieh@mediatek.com
Now pushed to v5.9-next/soc
Thanks!
drivers/soc/mediatek/mtk-cmdq-helper.c | 23 +++++++++++++++++++++++ include/linux/mailbox/mtk-cmdq-mailbox.h | 1 + include/linux/soc/mediatek/mtk-cmdq.h | 18 ++++++++++++++++++ 3 files changed, 42 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c index 880349b3f16c..550e9e7e3ff2 100644 --- a/drivers/soc/mediatek/mtk-cmdq-helper.c +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c @@ -242,6 +242,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, } EXPORT_SYMBOL(cmdq_pkt_write_s);
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx, u32 mask)+{
- struct cmdq_instruction inst = {};
- int err;
- inst.op = CMDQ_CODE_MASK;
- inst.mask = ~mask;
- err = cmdq_pkt_append_command(pkt, inst);
- if (err < 0)
return err;- inst.mask = 0;
- inst.op = CMDQ_CODE_WRITE_S_MASK;
- inst.src_t = CMDQ_REG_TYPE;
- inst.sop = high_addr_reg_idx;
- inst.offset = addr_low;
- inst.src_reg = src_reg_idx;
- return cmdq_pkt_append_command(pkt, inst);
+} +EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
- int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event) { struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h index 1f76cfedb16d..90d1d8e64412 100644 --- a/include/linux/mailbox/mtk-cmdq-mailbox.h +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h @@ -61,6 +61,7 @@ enum cmdq_code { CMDQ_CODE_WFE = 0x20, CMDQ_CODE_EOC = 0x40, CMDQ_CODE_WRITE_S = 0x90,
- CMDQ_CODE_WRITE_S_MASK = 0x91, CMDQ_CODE_LOGIC = 0xa0, };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 9b0c57a0063d..53230341bf94 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -122,6 +122,24 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 src_reg_idx);
/**
- cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
- @pkt: the CMDQ packet
- @high_addr_reg_idx: internal register ID which contains high address of pa
- @addr_low: low address of pa
- @src_reg_idx: the CMDQ internal register ID which cache source value
- @mask: the specified target address mask, use U32_MAX if no need
- Return: 0 for success; else the error code is returned
- Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
- to get high address and call cmdq_pkt_assign() to assign value into internal
- reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
- call to this function.
- */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx, u32 mask);+/**
- cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
- @pkt: the CMDQ packet
- @event: the desired event type to "wait and CLEAR"