On 4/5/22 17:24, Dave Stevenson wrote:
Hi,
If we can initialise the DSI host before the bridge for the pre_enable, then all the configuration moves to the atomic_pre_enable and there should be no need to have the delay.
I can't 100% guarantee that, but one of the folks on the Pi forums is using [1] which does that, and is reporting it working well. (He's also using the DSI85 to take 2 DSI links and drive 2 LVDS single link panels)
It seems to me that checking whether the bridge got correctly initialized is orthogonal to the aforementioned patchset though ?
It's the delay that is ugly.
You do need to wait a little after the initialization and before checking the status, so that delay is not going away no matter how you frob with the DSI bridge.
Put the check in atomic_enable which will be slightly later than configuration in pre_enable? Check that sufficient jiffies have passed if you needed. Or wire up the IRQ line from the SN65DSI83 rather than polling the IRQ Status register. Delayed workqueue if the IRQ isn't wired up.
Are you able to do such deferred non-atomic operations in atomic_enable callback ?
atomic_enable returns void so you can't fail the atomic_enable. All you're doing is reading a register and potentially logging an error - surely that can be done from any context.
If I read it right your log message is triggered by any bit being set in REG_IRQ_STAT. So an inconveniently timed correctable DSI error will set bit 4 and log the error even though it's been corrected. Likewise bit 7 / CHA_SYNCH_ERR could get triggered by an H or V sync packet being received in that 10-12ms window (we're in atomic_enable, so video is already running).
There should be no bits set in the IRQ_STAT register if everything works as it should.
On a perfect link, yes.
If your hardware is broken, then you really do want to know about it.
Looking at the top 4 bits.
Bit 4 CHA_COR_ECC_ERR When the DSI channel A packet processor detects a correctable ECC error, this bit is set.
The error is corrected, so why do we care? The display is still working.
If you get a lot of those correctable errors, your display might not work at all. So we do care.
Bit 5 CHA_UNC_ECC_ERR When the DSI channel A packet processor detects an uncorrectable ECC error, this bit is set; Bit 6 CHA_CRC_ERR When the DSI channel A packet processor detects a data stream CRC error, this bit is set
It doesn't say what behaviour the DSI83 will take under these circumstances, but shouldn't be fatal to the display.
See above, it is an error, hardware is broken, you want to know about this and fix the hardware.
Bit 7 CHA_SYNCH_ERR When the DSI channel A packet processor detects an HS or VS synchronization error, that is, an unexpected sync packet; this bit is set.
It's happened, but shouldn't be fatal, so why do we care? The display should pick up correctly at the start of the next frame.
Or maybe it won't because of noise on the DSI link, fix the hardware.
Sorry, I am not happy about hiding errors and trying to somehow justify they are OK. They are not, the hardware is likely broken and it should be fixed, that is the right way to handle these errors.
As I've already said, we're in atomic_enable and video is therefore running, this is highly plausibly going to happen. We've delayed for 4-5ms in sn65dsi83_atomic_enable, so we're a third of the way through a frame at 60fps. The chances of seeing a VS or HS packet at an unexpected time is therefore high.
Bits 2 & 3 look equally inconsequential.
Bit 0 as PLL unlock would cause grief.
If it's the PLL being unlocked that is the issue then it should only be checking bit 0. Or possibly reading the actual PLL lock status from REG_RC_LVDS_PLL_PLL_EN_STAT. Although as we've already checked that the PLL is locked via REG_RC_LVDS_PLL_PLL_EN_STAT earlier in the atomic_enable, I'm now a little confused as to the condition you are actually wanting to detect.
Any outstanding errors which are currently hidden and only show up sporadically at the worst possible moment.
If you were constantly looking at the status then that would be reasonable. To be looking during one specific 10-12ms period of time for some fairly generic status values seems a little redundant, and a waste of time in delaying the atomic_enable.
Sorry, I disagree. I think 10ms extra time in atomic_enable() is a good trade-off for knowing about possible hardware problems sooner rather than later.
It'll be interesting to see if these events just go away when the initialisation sequence specified in the datasheet is being followed. Let's leave the debate until then, as it's currently fairly arbitrary.
No, your patch series is orthogonal to this patch.