From: Heiko Stuebner heiko.stuebner@theobroma-systems.com

Panel driver for the KD35T133 display from Elida, used for example in the rk3326-based Odroid Go Advance handheld.

changes in v2: - rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor the underlying mipi_dsi_dcs_write (Robin)

Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com --- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-elida-kd35t133.c | 352 +++++++++++++++++++ 3 files changed, 363 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-elida-kd35t133.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index db7ba062027e..56149fdbdf53 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -50,6 +50,16 @@ config DRM_PANEL_SIMPLE that it can be automatically turned off when the panel goes into a low power state.

+config DRM_PANEL_ELIDA_KD35T133 + tristate "Elida KD35T133 panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Elida + KD35T133 controller for 320x480 LCD panels with MIPI-DSI + system interfaces. + config DRM_PANEL_FEIYANG_FY07024DI26A30D tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 276907410a45..63189c015ba5 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o +obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c new file mode 100644 index 000000000000..424fb3998d2f --- /dev/null +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Elida kd35t133 5.5" MIPI-DSI panel driver + * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH + * + * based on + * + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver + * Copyright (C) Purism SPC 2019 + */ + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +/* Manufacturer specific Commands send via DSI */ +#define KD35T133_CMD_INTERFACEMODECTRL 0xb0 +#define KD35T133_CMD_FRAMERATECTRL 0xb1 +#define KD35T133_CMD_DISPLAYINVERSIONCTRL 0xb4 +#define KD35T133_CMD_DISPLAYFUNCTIONCTRL 0xb6 +#define KD35T133_CMD_POWERCONTROL1 0xc0 +#define KD35T133_CMD_POWERCONTROL2 0xc1 +#define KD35T133_CMD_VCOMCONTROL 0xc5 +#define KD35T133_CMD_POSITIVEGAMMA 0xe0 +#define KD35T133_CMD_NEGATIVEGAMMA 0xe1 +#define KD35T133_CMD_SETIMAGEFUNCTION 0xe9 +#define KD35T133_CMD_ADJUSTCONTROL3 0xf7 + +struct kd35t133 { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator *vdd; + struct regulator *iovcc; + bool prepared; +}; + +static inline struct kd35t133 *panel_to_kd35t133(struct drm_panel *panel) +{ + return container_of(panel, struct kd35t133, panel); +} + +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static int kd35t133_init_sequence(struct kd35t133 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct device *dev = ctx->dev; + + /* + * Init sequence was supplied by the panel vendor with minimal + * documentation. + */ + dsi_dcs_write_seq(dsi, KD35T133_CMD_POSITIVEGAMMA, + 0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56, + 0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f); + dsi_dcs_write_seq(dsi, KD35T133_CMD_NEGATIVEGAMMA, + 0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34, + 0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f); + dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17); + dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL2, 0x41); + dsi_dcs_write_seq(dsi, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80); + dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x48); + dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); + dsi_dcs_write_seq(dsi, KD35T133_CMD_INTERFACEMODECTRL, 0x00); + dsi_dcs_write_seq(dsi, KD35T133_CMD_FRAMERATECTRL, 0xa0); + dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02); + dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYFUNCTIONCTRL, + 0x20, 0x02); + dsi_dcs_write_seq(dsi, KD35T133_CMD_SETIMAGEFUNCTION, 0x00); + dsi_dcs_write_seq(dsi, KD35T133_CMD_ADJUSTCONTROL3, + 0xa9, 0x51, 0x2c, 0x82); + mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0); + + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n"); + return 0; +} + +static int kd35t133_unprepare(struct drm_panel *panel) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (!ctx->prepared) + return 0; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n", + ret); + + mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n", + ret); + return ret; + } + + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vdd); + + ctx->prepared = false; + + return 0; +} + +static int kd35t133_prepare(struct drm_panel *panel) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (ctx->prepared) + return 0; + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n"); + ret = regulator_enable(ctx->vdd); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable vdd supply: %d\n", ret); + return ret; + } + + ret = regulator_enable(ctx->iovcc); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable iovcc supply: %d\n", ret); + goto disable_vdd; + } + + msleep(20); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(10, 20); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + + msleep(20); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret); + goto disable_iovcc; + } + + msleep(250); + + ret = kd35t133_init_sequence(ctx); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", + ret); + goto disable_iovcc; + } + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret); + goto disable_iovcc; + } + + msleep(50); + + ctx->prepared = true; + + return 0; + +disable_iovcc: + regulator_disable(ctx->iovcc); +disable_vdd: + regulator_disable(ctx->vdd); + return ret; +} + +static const struct drm_display_mode default_mode = { + .hdisplay = 320, + .hsync_start = 320 + 130, + .hsync_end = 320 + 130 + 4, + .htotal = 320 + 130 + 4 + 130, + .vdisplay = 480, + .vsync_start = 480 + 2, + .vsync_end = 480 + 2 + 1, + .vtotal = 480 + 2 + 1 + 2, + .vrefresh = 60, + .clock = 17000, + .width_mm = 42, + .height_mm = 82, +}; + +static int kd35t133_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs kd35t133_funcs = { + .unprepare = kd35t133_unprepare, + .prepare = kd35t133_prepare, + .get_modes = kd35t133_get_modes, +}; + +static int kd35t133_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct kd35t133 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + DRM_DEV_ERROR(dev, "cannot get reset gpio\n"); + return PTR_ERR(ctx->reset_gpio); + } + + ctx->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(ctx->vdd)) { + ret = PTR_ERR(ctx->vdd); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request vdd regulator: %d\n", + ret); + return ret; + } + + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + ret = PTR_ERR(ctx->iovcc); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request iovcc regulator: %d\n", + ret); + return ret; + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 1; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET; + + drm_panel_init(&ctx->panel, &dsi->dev, &kd35t133_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void kd35t133_shutdown(struct mipi_dsi_device *dsi) +{ + struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = drm_panel_unprepare(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n", + ret); + + ret = drm_panel_disable(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n", + ret); +} + +static int kd35t133_remove(struct mipi_dsi_device *dsi) +{ + struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + kd35t133_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n", + ret); + + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id kd35t133_of_match[] = { + { .compatible = "elida,kd35t133" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, kd35t133_of_match); + +static struct mipi_dsi_driver kd35t133_driver = { + .driver = { + .name = "panel-elida-kd35t133", + .of_match_table = kd35t133_of_match, + }, + .probe = kd35t133_probe, + .remove = kd35t133_remove, + .shutdown = kd35t133_shutdown, +}; +module_mipi_dsi_driver(kd35t133_driver); + +MODULE_AUTHOR("Heiko Stuebner heiko.stuebner@theobroma-systems.com"); +MODULE_DESCRIPTION("DRM driver for Elida kd35t133 MIPI DSI panel"); +MODULE_LICENSE("GPL v2");

On Tue, Feb 25, 2020 at 10:39:11AM +0100, Heiko Stuebner wrote:

From: Heiko Stuebner heiko.stuebner@theobroma-systems.com

Shenzen Elida Technology Co. Ltd. is a Chinese TFT manufacturer.

Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com

Acked-by: Sam Ravnborg sam@ravnborg.org

---

Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9e67944bec9c..38d3149d3adc 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -285,6 +285,8 @@ patternProperties: description: Elan Microelectronic Corp. "^elgin,.*": description: Elgin S/A.

• "^elida,.*":
• description: Shenzhen Elida Technology Co., Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. "^emlid,.*":

-- 2.24.1