On 2020-11-08 23:25, Amit Pundir wrote:
On Tue, 4 Aug 2020 at 21:09, Rob Clark robdclark@gmail.com wrote:
On Thu, Jul 16, 2020 at 4:36 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
Reviewed-by: Rob Clark robdclark@chromium.org
Hi Kalyan, Rob,
This patch broke the display on the PocoF1 phone (sdm845-xiaomi-beryllium.dts) running AOSP. I can boot to UI but the display is frozen soon after that and dmesg is full of following errors:
[drm:dpu_core_perf_crtc_update:397] [dpu error]crtc-65: failed to update bus bw vote [drm:dpu_core_perf_crtc_check:203] [dpu error]exceeds bandwidth: 7649746kb > 6800000kb [drm:dpu_crtc_atomic_check:969] [dpu error]crtc65 failed performance check -7 [drm:dpu_core_perf_crtc_check:203] [dpu error]exceeds bandwidth: 7649746kb > 6800000kb [drm:dpu_crtc_atomic_check:969] [dpu error]crtc65 failed performance check -7 [drm:dpu_core_perf_crtc_check:203] [dpu error]exceeds bandwidth: 7649746kb > 6800000kb [drm:dpu_crtc_atomic_check:969] [dpu error]crtc65 failed performance check -7
Here is the full dmesg https://pastebin.ubuntu.com/p/PcSdNgMnYw/. Georgi pointed out following patch but it didn't help, https://lore.kernel.org/dri-devel/20201027102304.945424-1-dmitry.baryshkov@l... Am I missing any other followup fix?
Regards, Amit Pundir __
Hi Amit,
Apologies for the delay.
I have gone through the logs and referred to the below panel file for the timings. https://github.com/Matheus-Garbelini/Kernel-Sphinx-Pocophone-F1/blob/master/...
if the above is correct file, then below could be the possible root cause.
The panel back porch and pw is less and it is causing the prefill bw requirement to shoot up per layer as currently we are not considering front porch in the calculation. can you please try the attached patch in the email as a solution and provide me the feedback, i'll post it as a formal change.
Thanks, Kalyan
_____________________________________________
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
Hi Kalyan,
On Tue, 24 Nov 2020 at 18:27, kalyan_t@codeaurora.org wrote:
On 2020-11-08 23:25, Amit Pundir wrote:
On Tue, 4 Aug 2020 at 21:09, Rob Clark robdclark@gmail.com wrote:
On Thu, Jul 16, 2020 at 4:36 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
Reviewed-by: Rob Clark robdclark@chromium.org
Hi Kalyan, Rob,
This patch broke the display on the PocoF1 phone (sdm845-xiaomi-beryllium.dts) running AOSP. I can boot to UI but the display is frozen soon after that and dmesg is full of following errors:
[drm:dpu_core_perf_crtc_update:397] [dpu error]crtc-65: failed to update bus bw vote [drm:dpu_core_perf_crtc_check:203] [dpu error]exceeds bandwidth: 7649746kb > 6800000kb [drm:dpu_crtc_atomic_check:969] [dpu error]crtc65 failed performance check -7 [drm:dpu_core_perf_crtc_check:203] [dpu error]exceeds bandwidth: 7649746kb > 6800000kb [drm:dpu_crtc_atomic_check:969] [dpu error]crtc65 failed performance check -7 [drm:dpu_core_perf_crtc_check:203] [dpu error]exceeds bandwidth: 7649746kb > 6800000kb [drm:dpu_crtc_atomic_check:969] [dpu error]crtc65 failed performance check -7
Here is the full dmesg https://pastebin.ubuntu.com/p/PcSdNgMnYw/. Georgi pointed out following patch but it didn't help, https://lore.kernel.org/dri-devel/20201027102304.945424-1-dmitry.baryshkov@l... Am I missing any other followup fix?
Regards, Amit Pundir __
Hi Amit,
Apologies for the delay.
No worries at all.
I have gone through the logs and referred to the below panel file for the timings. https://github.com/Matheus-Garbelini/Kernel-Sphinx-Pocophone-F1/blob/master/...
if the above is correct file, then below could be the possible root cause.
The panel back porch and pw is less and it is causing the prefill bw requirement to shoot up per layer as currently we are not considering front porch in the calculation. can you please try the attached patch in the email as a solution and provide me the feedback, i'll post it as a formal change.
The attached patch worked for me. Thanks a lot for looking closely into this issue.
Regards, Amit Pundir
Thanks, Kalyan
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
dri-devel@lists.freedesktop.org
-
Amit Pundir -
kalyan_t＠codeaurora.org