Amlogic uses a proprietary lossless image compression protocol and format for their hardware video codec accelerators, either video decoders or video input encoders.
It considerably reduces memory bandwidth while writing and reading frames in memory.
The underlying storage is considered to be 3 components, 8bit or 10-bit per component, YCbCr 420, single plane : - DRM_FORMAT_YUV420_8BIT - DRM_FORMAT_YUV420_10BIT
This modifier will be notably added to DMA-BUF frames imported from the V4L2 Amlogic VDEC decoder.
At least two layout are supported : - Basic: composed of a body and a header - Scatter: the buffer is filled with a IOMMU scatter table referring to the encoder current memory layout. This mode if more efficient in terms of memory allocation but frames are not dumpable and only valid during until the buffer is freed and back in control of the encoder
At least two options are supported : - Memory saving: when the pixel bpp is 8b, the size of the superblock can be reduced, thus saving memory.
This serie adds the missing register, updated the FBC decoder registers content to be committed by the crtc code.
The Amlogic FBC has been tested with compressed content from the Amlogic HW VP9 decoder on S905X (GXL), S905D2 (G12A) and S905X3 (SM1) in 8bit (Scatter+Mem Saving on G12A/SM1, Mem Saving on GXL) and 10bit (Scatter on G12A/SM1, default on GXL).
It's expected to work as-is on GXM and G12B SoCs.
Changes since v8 at [8]: - added clarification of scatter mmap behavior as suggested by daniel - added ack and review tags
Changes since v7 at [7]: - rebased on drm-misc-next - removed spurious DEBUG in drivers/gpu/drm/meson/meson_overlay.c
Changes since v6 at [6]: - rebased on drm-misc-next (after drm-misc-next-2020-05-14) - updated patch 1 commit log for completion
Changes since v5 at [5]: - merged all fourcc patches in 1 - fixed fourcc definition to have only a single DRM_MOD_ - fixed 2 checkpatch issues
Changes since v4 at [4]: - added layout and options mask - cosmetic changes in fourcc.h - fixed mod check using the masks - fixed plane apply using the masks
Changes since v3 at [3]: - added dropped fourcc patch for scatter - fixed build of last patch
Changes since v2 at [2]: - Added "BASIC" layout and moved the SCATTER mode as layout, making BASIC and SCATTER layout exclusives - Moved the Memory Saving at bit 8 for options fields - Split fourcc and overlay patch to introduce basic, mem saving and then scatter in separate patches - Added comment about "transferability" of the buffers
Changes since v1 at [1]: - s/VD1_AXI_SEL_AFB/VD1_AXI_SEL_AFBC/ into meson_registers.h
[1] https://patchwork.freedesktop.org/series/73722/#rev1 [2] https://patchwork.freedesktop.org/series/73722/#rev2 [3] https://patchwork.freedesktop.org/series/73722/#rev3 [4] https://patchwork.freedesktop.org/series/73722/#rev4 [5] https://patchwork.freedesktop.org/series/73722/#rev5 [6] https://patchwork.freedesktop.org/series/73722/#rev6 [7] https://patchwork.freedesktop.org/series/73722/#rev7 [7] https://patchwork.freedesktop.org/series/73722/#rev8
Neil Armstrong (6): drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression drm/meson: add Amlogic Video FBC registers drm/meson: overlay: setup overlay for Amlogic FBC drm/meson: overlay: setup overlay for Amlogic FBC Memory Saving mode drm/meson: overlay: setup overlay for Amlogic FBC Scatter Memory layout drm/meson: crtc: handle commit of Amlogic FBC frames
drivers/gpu/drm/meson/meson_crtc.c | 118 +++++++--- drivers/gpu/drm/meson/meson_drv.h | 16 ++ drivers/gpu/drm/meson/meson_overlay.c | 289 +++++++++++++++++++++++- drivers/gpu/drm/meson/meson_registers.h | 22 ++ include/uapi/drm/drm_fourcc.h | 81 +++++++ 5 files changed, 488 insertions(+), 38 deletions(-)
Amlogic uses a proprietary lossless image compression protocol and format for their hardware video codec accelerators, either video decoders or video input encoders.
It considerably reduces memory bandwidth while writing and reading frames in memory.
The underlying storage is considered to be 3 components, 8bit or 10-bit per component, YCbCr 420, single plane : - DRM_FORMAT_YUV420_8BIT - DRM_FORMAT_YUV420_10BIT
This modifier will be notably added to DMA-BUF frames imported from the V4L2 Amlogic VDEC decoder.
This introduces the basic layout composed of: - a body content organized in 64x32 superblocks with 4096 bytes per superblock in default mode. - a 32 bytes per 128x64 header block
This layout is tranferrable between Amlogic SoCs supporting this modifier.
The Memory Saving option exist changing the layout superblock size to save memory when using 8bit components pixels size.
Finally is also adds the Scatter Memory layout, meaning the header contains IOMMU references to the compressed frames content to optimize memory access and layout.
In this mode, only the header memory address is needed, thus the content memory organization is tied to the current producer execution and cannot be saved/dumped neither transferrable between Amlogic SoCs supporting this modifier.
Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Acked-by: Daniel Vetter daniel.vetter@ffwll.ch Reviewed-by: Kevin Hilman khilman@baylibre.com --- include/uapi/drm/drm_fourcc.h | 81 +++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index 993c1b342315..cbf92fdf2712 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -331,6 +331,7 @@ extern "C" { #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07 #define DRM_FORMAT_MOD_VENDOR_ARM 0x08 #define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09 +#define DRM_FORMAT_MOD_VENDOR_AMLOGIC 0x0a
/* add more to the end as needed */
@@ -950,6 +951,86 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) */ #define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
+/* + * Amlogic Video Framebuffer Compression modifiers + * + * Amlogic uses a proprietary lossless image compression protocol and format + * for their hardware video codec accelerators, either video decoders or + * video input encoders. + * + * It considerably reduces memory bandwidth while writing and reading + * frames in memory. + * + * The underlying storage is considered to be 3 components, 8bit or 10-bit + * per component YCbCr 420, single plane : + * - DRM_FORMAT_YUV420_8BIT + * - DRM_FORMAT_YUV420_10BIT + * + * The first 8 bits of the mode defines the layout, then the following 8 bits + * defines the options changing the layout. + * + * Not all combinations are valid, and different SoCs may support different + * combinations of layout and options. + */ +#define __fourcc_mod_amlogic_layout_mask 0xf +#define __fourcc_mod_amlogic_options_shift 8 +#define __fourcc_mod_amlogic_options_mask 0xf + +#define DRM_FORMAT_MOD_AMLOGIC_FBC(__layout, __options) \ + fourcc_mod_code(AMLOGIC, \ + ((__layout) & __fourcc_mod_amlogic_layout_mask) | \ + ((__options) & __fourcc_mod_amlogic_options_mask \ + << __fourcc_mod_amlogic_options_shift)) + +/* Amlogic FBC Layouts */ + +/* + * Amlogic FBC Basic Layout + * + * The basic layout is composed of: + * - a body content organized in 64x32 superblocks with 4096 bytes per + * superblock in default mode. + * - a 32 bytes per 128x64 header block + * + * This layout is transferrable between Amlogic SoCs supporting this modifier. + */ +#define AMLOGIC_FBC_LAYOUT_BASIC (1ULL) + +/* + * Amlogic FBC Scatter Memory layout + * + * Indicates the header contains IOMMU references to the compressed + * frames content to optimize memory access and layout. + * + * In this mode, only the header memory address is needed, thus the + * content memory organization is tied to the current producer + * execution and cannot be saved/dumped neither transferrable between + * Amlogic SoCs supporting this modifier. + * + * Due to the nature of the layout, these buffers are not expected to + * be accessible by the user-space clients, but only accessible by the + * hardware producers and consumers. + * + * The user-space clients should expect a failure while trying to mmap + * the DMA-BUF handle returned by the producer. + */ +#define AMLOGIC_FBC_LAYOUT_SCATTER (2ULL) + +/* Amlogic FBC Layout Options Bit Mask */ + +/* + * Amlogic FBC Memory Saving mode + * + * Indicates the storage is packed when pixel size is multiple of word + * boudaries, i.e. 8bit should be stored in this mode to save allocation + * memory. + * + * This mode reduces body layout to 3072 bytes per 64x32 superblock with + * the basic layout and 3200 bytes per 64x32 superblock combined with + * the scatter layout. + */ +#define AMLOGIC_FBC_OPTION_MEM_SAVING (1ULL << 0) + #if defined(__cplusplus) } #endif
Thanks for the update!
The driver should also disallow importing a AMLOGIC_FBC_LAYOUT_SCATTER DMA-BUF from another device, but I guess this is clear enough ("not transferrable between Amlogic SoCs").
From a user-space PoV:
Acked-by: Simon Ser contact@emersion.fr
Hi,
On 03/07/2020 11:08, Simon Ser wrote:
Thanks for the update!
The driver should also disallow importing a AMLOGIC_FBC_LAYOUT_SCATTER DMA-BUF from another device, but I guess this is clear enough ("not transferrable between Amlogic SoCs").
Good idea, I'll experiment disabling import of DRM allocated DUMB buffers, but not sure I can disable import of other allocaters like ION.
Neil
From a user-space PoV:
Acked-by: Simon Ser contact@emersion.fr
Add the registers of the VPU VD1 Amlogic FBC decoder module, and routing register.
Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com --- drivers/gpu/drm/meson/meson_registers.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h index 8ea00546cd4e..08631fdfe4b9 100644 --- a/drivers/gpu/drm/meson/meson_registers.h +++ b/drivers/gpu/drm/meson/meson_registers.h @@ -144,10 +144,15 @@ #define VIU_SW_RESET_OSD1 BIT(0) #define VIU_MISC_CTRL0 0x1a06 #define VIU_CTRL0_VD1_AFBC_MASK 0x170000 +#define VIU_CTRL0_AFBC_TO_VD1 BIT(20) #define VIU_MISC_CTRL1 0x1a07 #define MALI_AFBC_MISC GENMASK(15, 8) #define D2D3_INTF_LENGTH 0x1a08 #define D2D3_INTF_CTRL0 0x1a09 +#define VD1_AFBCD0_MISC_CTRL 0x1a0a +#define VD1_AXI_SEL_AFBC (1 << 12) +#define AFBC_VD1_SEL (1 << 10) +#define VD2_AFBCD1_MISC_CTRL 0x1a0b #define VIU_OSD1_CTRL_STAT 0x1a10 #define VIU_OSD1_OSD_BLK_ENABLE BIT(0) #define VIU_OSD1_OSD_MEM_MODE_LINEAR BIT(2) @@ -365,6 +370,23 @@ #define VIU_OSD1_OETF_LUT_ADDR_PORT 0x1add #define VIU_OSD1_OETF_LUT_DATA_PORT 0x1ade #define AFBC_ENABLE 0x1ae0 +#define AFBC_MODE 0x1ae1 +#define AFBC_SIZE_IN 0x1ae2 +#define AFBC_DEC_DEF_COLOR 0x1ae3 +#define AFBC_CONV_CTRL 0x1ae4 +#define AFBC_LBUF_DEPTH 0x1ae5 +#define AFBC_HEAD_BADDR 0x1ae6 +#define AFBC_BODY_BADDR 0x1ae7 +#define AFBC_SIZE_OUT 0x1ae8 +#define AFBC_OUT_YSCOPE 0x1ae9 +#define AFBC_STAT 0x1aea +#define AFBC_VD_CFMT_CTRL 0x1aeb +#define AFBC_VD_CFMT_W 0x1aec +#define AFBC_MIF_HOR_SCOPE 0x1aed +#define AFBC_MIF_VER_SCOPE 0x1aee +#define AFBC_PIXEL_HOR_SCOPE 0x1aef +#define AFBC_PIXEL_VER_SCOPE 0x1af0 +#define AFBC_VD_CFMT_H 0x1af1
/* vpp */ #define VPP_DUMMY_DATA 0x1d00
Setup the Amlogic FBC decoder for the VD1 video overlay plane.
The VD1 Amlogic FBC decoder is integrated in the pipeline like the YUV pixel reading/formatter but used a direct memory address instead.
This adds support for the basic layout, and needs to calculate the content body size since the header is allocated after.
Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com --- drivers/gpu/drm/meson/meson_drv.h | 16 ++ drivers/gpu/drm/meson/meson_overlay.c | 251 +++++++++++++++++++++++++- 2 files changed, 259 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h index 5b23704a80d6..177dac3ca3be 100644 --- a/drivers/gpu/drm/meson/meson_drv.h +++ b/drivers/gpu/drm/meson/meson_drv.h @@ -86,6 +86,7 @@ struct meson_drm {
bool vd1_enabled; bool vd1_commit; + bool vd1_afbc; unsigned int vd1_planes; uint32_t vd1_if0_gen_reg; uint32_t vd1_if0_luma_x0; @@ -111,6 +112,21 @@ struct meson_drm { uint32_t vd1_height0; uint32_t vd1_height1; uint32_t vd1_height2; + uint32_t vd1_afbc_mode; + uint32_t vd1_afbc_en; + uint32_t vd1_afbc_head_addr; + uint32_t vd1_afbc_body_addr; + uint32_t vd1_afbc_conv_ctrl; + uint32_t vd1_afbc_dec_def_color; + uint32_t vd1_afbc_vd_cfmt_ctrl; + uint32_t vd1_afbc_vd_cfmt_w; + uint32_t vd1_afbc_vd_cfmt_h; + uint32_t vd1_afbc_mif_hor_scope; + uint32_t vd1_afbc_mif_ver_scope; + uint32_t vd1_afbc_size_out; + uint32_t vd1_afbc_pixel_hor_scope; + uint32_t vd1_afbc_pixel_ver_scope; + uint32_t vd1_afbc_size_in; uint32_t vpp_pic_in_height; uint32_t vpp_postblend_vd1_h_start_end; uint32_t vpp_postblend_vd1_v_start_end; diff --git a/drivers/gpu/drm/meson/meson_overlay.c b/drivers/gpu/drm/meson/meson_overlay.c index 2468b0212d52..293f606ba164 100644 --- a/drivers/gpu/drm/meson/meson_overlay.c +++ b/drivers/gpu/drm/meson/meson_overlay.c @@ -76,6 +76,84 @@ #define VD_REGION24_START(value) FIELD_PREP(GENMASK(11, 0), value) #define VD_REGION13_END(value) FIELD_PREP(GENMASK(27, 16), value)
+/* AFBC_ENABLE */ +#define AFBC_DEC_ENABLE BIT(8) +#define AFBC_FRM_START BIT(0) + +/* AFBC_MODE */ +#define AFBC_HORZ_SKIP_UV(value) FIELD_PREP(GENMASK(1, 0), value) +#define AFBC_VERT_SKIP_UV(value) FIELD_PREP(GENMASK(3, 2), value) +#define AFBC_HORZ_SKIP_Y(value) FIELD_PREP(GENMASK(5, 4), value) +#define AFBC_VERT_SKIP_Y(value) FIELD_PREP(GENMASK(7, 6), value) +#define AFBC_COMPBITS_YUV(value) FIELD_PREP(GENMASK(13, 8), value) +#define AFBC_COMPBITS_8BIT 0 +#define AFBC_COMPBITS_10BIT (2 | (2 << 2) | (2 << 4)) +#define AFBC_BURST_LEN(value) FIELD_PREP(GENMASK(15, 14), value) +#define AFBC_HOLD_LINE_NUM(value) FIELD_PREP(GENMASK(22, 16), value) +#define AFBC_MIF_URGENT(value) FIELD_PREP(GENMASK(25, 24), value) +#define AFBC_REV_MODE(value) FIELD_PREP(GENMASK(27, 26), value) +#define AFBC_BLK_MEM_MODE BIT(28) +#define AFBC_SCATTER_MODE BIT(29) +#define AFBC_SOFT_RESET BIT(31) + +/* AFBC_SIZE_IN */ +#define AFBC_HSIZE_IN(value) FIELD_PREP(GENMASK(28, 16), value) +#define AFBC_VSIZE_IN(value) FIELD_PREP(GENMASK(12, 0), value) + +/* AFBC_DEC_DEF_COLOR */ +#define AFBC_DEF_COLOR_Y(value) FIELD_PREP(GENMASK(29, 20), value) +#define AFBC_DEF_COLOR_U(value) FIELD_PREP(GENMASK(19, 10), value) +#define AFBC_DEF_COLOR_V(value) FIELD_PREP(GENMASK(9, 0), value) + +/* AFBC_CONV_CTRL */ +#define AFBC_CONV_LBUF_LEN(value) FIELD_PREP(GENMASK(11, 0), value) + +/* AFBC_LBUF_DEPTH */ +#define AFBC_DEC_LBUF_DEPTH(value) FIELD_PREP(GENMASK(27, 16), value) +#define AFBC_MIF_LBUF_DEPTH(value) FIELD_PREP(GENMASK(11, 0), value) + +/* AFBC_OUT_XSCOPE/AFBC_SIZE_OUT */ +#define AFBC_HSIZE_OUT(value) FIELD_PREP(GENMASK(28, 16), value) +#define AFBC_VSIZE_OUT(value) FIELD_PREP(GENMASK(12, 0), value) +#define AFBC_OUT_HORZ_BGN(value) FIELD_PREP(GENMASK(28, 16), value) +#define AFBC_OUT_HORZ_END(value) FIELD_PREP(GENMASK(12, 0), value) + +/* AFBC_OUT_YSCOPE */ +#define AFBC_OUT_VERT_BGN(value) FIELD_PREP(GENMASK(28, 16), value) +#define AFBC_OUT_VERT_END(value) FIELD_PREP(GENMASK(12, 0), value) + +/* AFBC_VD_CFMT_CTRL */ +#define AFBC_HORZ_RPT_PIXEL0 BIT(23) +#define AFBC_HORZ_Y_C_RATIO(value) FIELD_PREP(GENMASK(22, 21), value) +#define AFBC_HORZ_FMT_EN BIT(20) +#define AFBC_VERT_RPT_LINE0 BIT(16) +#define AFBC_VERT_INITIAL_PHASE(value) FIELD_PREP(GENMASK(11, 8), value) +#define AFBC_VERT_PHASE_STEP(value) FIELD_PREP(GENMASK(7, 1), value) +#define AFBC_VERT_FMT_EN BIT(0) + +/* AFBC_VD_CFMT_W */ +#define AFBC_VD_V_WIDTH(value) FIELD_PREP(GENMASK(11, 0), value) +#define AFBC_VD_H_WIDTH(value) FIELD_PREP(GENMASK(27, 16), value) + +/* AFBC_MIF_HOR_SCOPE */ +#define AFBC_MIF_BLK_BGN_H(value) FIELD_PREP(GENMASK(25, 16), value) +#define AFBC_MIF_BLK_END_H(value) FIELD_PREP(GENMASK(9, 0), value) + +/* AFBC_MIF_VER_SCOPE */ +#define AFBC_MIF_BLK_BGN_V(value) FIELD_PREP(GENMASK(27, 16), value) +#define AFBC_MIF_BLK_END_V(value) FIELD_PREP(GENMASK(11, 0), value) + +/* AFBC_PIXEL_HOR_SCOPE */ +#define AFBC_DEC_PIXEL_BGN_H(value) FIELD_PREP(GENMASK(28, 16), value) +#define AFBC_DEC_PIXEL_END_H(value) FIELD_PREP(GENMASK(12, 0), value) + +/* AFBC_PIXEL_VER_SCOPE */ +#define AFBC_DEC_PIXEL_BGN_V(value) FIELD_PREP(GENMASK(28, 16), value) +#define AFBC_DEC_PIXEL_END_V(value) FIELD_PREP(GENMASK(12, 0), value) + +/* AFBC_VD_CFMT_H */ +#define AFBC_VD_HEIGHT(value) FIELD_PREP(GENMASK(12, 0), value) + struct meson_overlay { struct drm_plane base; struct meson_drm *priv; @@ -157,6 +235,9 @@ static void meson_overlay_setup_scaler_params(struct meson_drm *priv, unsigned int ratio_x, ratio_y; int temp_height, temp_width; unsigned int w_in, h_in; + int afbc_left, afbc_right; + int afbc_top_src, afbc_bottom_src; + int afbc_top, afbc_bottom; int temp, start, end;
if (!crtc_state) { @@ -169,7 +250,7 @@ static void meson_overlay_setup_scaler_params(struct meson_drm *priv,
w_in = fixed16_to_int(state->src_w); h_in = fixed16_to_int(state->src_h); - crop_top = fixed16_to_int(state->src_x); + crop_top = fixed16_to_int(state->src_y); crop_left = fixed16_to_int(state->src_x);
video_top = state->crtc_y; @@ -243,6 +324,14 @@ static void meson_overlay_setup_scaler_params(struct meson_drm *priv, DRM_DEBUG("vsc startp %d endp %d start_lines %d end_lines %d\n", vsc_startp, vsc_endp, vd_start_lines, vd_end_lines);
+ afbc_top = round_down(vd_start_lines, 4); + afbc_bottom = round_up(vd_end_lines + 1, 4); + afbc_top_src = 0; + afbc_bottom_src = round_up(h_in + 1, 4); + + DRM_DEBUG("afbc top %d (src %d) bottom %d (src %d)\n", + afbc_top, afbc_top_src, afbc_bottom, afbc_bottom_src); + /* Horizontal */
start = video_left + video_width / 2 - ((w_in << 17) / ratio_x); @@ -278,6 +367,16 @@ static void meson_overlay_setup_scaler_params(struct meson_drm *priv, DRM_DEBUG("hsc startp %d endp %d start_lines %d end_lines %d\n", hsc_startp, hsc_endp, hd_start_lines, hd_end_lines);
+ if (hd_start_lines > 0 || (hd_end_lines < w_in)) { + afbc_left = 0; + afbc_right = round_up(w_in, 32); + } else { + afbc_left = round_down(hd_start_lines, 32); + afbc_right = round_up(hd_end_lines + 1, 32); + } + + DRM_DEBUG("afbc left %d right %d\n", afbc_left, afbc_right); + priv->viu.vpp_vsc_start_phase_step = ratio_y << 6;
priv->viu.vpp_vsc_ini_phase = vphase << 8; @@ -293,6 +392,35 @@ static void meson_overlay_setup_scaler_params(struct meson_drm *priv, VD_H_WIDTH(hd_end_lines - hd_start_lines + 1) | VD_V_WIDTH(hd_end_lines/2 - hd_start_lines/2 + 1);
+ priv->viu.vd1_afbc_vd_cfmt_w = + AFBC_VD_H_WIDTH(afbc_right - afbc_left) | + AFBC_VD_V_WIDTH(afbc_right / 2 - afbc_left / 2); + + priv->viu.vd1_afbc_vd_cfmt_h = + AFBC_VD_HEIGHT((afbc_bottom - afbc_top) / 2); + + priv->viu.vd1_afbc_mif_hor_scope = AFBC_MIF_BLK_BGN_H(afbc_left / 32) | + AFBC_MIF_BLK_END_H((afbc_right / 32) - 1); + + priv->viu.vd1_afbc_mif_ver_scope = AFBC_MIF_BLK_BGN_V(afbc_top / 4) | + AFBC_MIF_BLK_END_H((afbc_bottom / 4) - 1); + + priv->viu.vd1_afbc_size_out = + AFBC_HSIZE_OUT(afbc_right - afbc_left) | + AFBC_VSIZE_OUT(afbc_bottom - afbc_top); + + priv->viu.vd1_afbc_pixel_hor_scope = + AFBC_DEC_PIXEL_BGN_H(hd_start_lines - afbc_left) | + AFBC_DEC_PIXEL_END_H(hd_end_lines - afbc_left); + + priv->viu.vd1_afbc_pixel_ver_scope = + AFBC_DEC_PIXEL_BGN_V(vd_start_lines - afbc_top) | + AFBC_DEC_PIXEL_END_V(vd_end_lines - afbc_top); + + priv->viu.vd1_afbc_size_in = + AFBC_HSIZE_IN(afbc_right - afbc_left) | + AFBC_VSIZE_IN(afbc_bottom_src - afbc_top_src); + priv->viu.vd1_if0_luma_y0 = VD_Y_START(vd_start_lines) | VD_Y_END(vd_end_lines);
@@ -350,11 +478,57 @@ static void meson_overlay_atomic_update(struct drm_plane *plane,
spin_lock_irqsave(&priv->drm->event_lock, flags);
- priv->viu.vd1_if0_gen_reg = VD_URGENT_CHROMA | - VD_URGENT_LUMA | - VD_HOLD_LINES(9) | - VD_CHRO_RPT_LASTL_CTRL | - VD_ENABLE; + if ((fb->modifier & DRM_FORMAT_MOD_AMLOGIC_FBC(0, 0)) == + DRM_FORMAT_MOD_AMLOGIC_FBC(0, 0)) { + priv->viu.vd1_afbc = true; + + priv->viu.vd1_afbc_mode = AFBC_MIF_URGENT(3) | + AFBC_HOLD_LINE_NUM(8) | + AFBC_BURST_LEN(2); + + priv->viu.vd1_afbc_en = 0x1600 | AFBC_DEC_ENABLE; + + priv->viu.vd1_afbc_conv_ctrl = AFBC_CONV_LBUF_LEN(256); + + priv->viu.vd1_afbc_dec_def_color = AFBC_DEF_COLOR_Y(1023); + + /* 420: horizontal / 2, vertical / 4 */ + priv->viu.vd1_afbc_vd_cfmt_ctrl = AFBC_HORZ_RPT_PIXEL0 | + AFBC_HORZ_Y_C_RATIO(1) | + AFBC_HORZ_FMT_EN | + AFBC_VERT_RPT_LINE0 | + AFBC_VERT_INITIAL_PHASE(12) | + AFBC_VERT_PHASE_STEP(8) | + AFBC_VERT_FMT_EN; + + switch (fb->format->format) { + /* AFBC Only formats */ + case DRM_FORMAT_YUV420_10BIT: + priv->viu.vd1_afbc_mode |= + AFBC_COMPBITS_YUV(AFBC_COMPBITS_10BIT); + priv->viu.vd1_afbc_dec_def_color |= + AFBC_DEF_COLOR_U(512) | + AFBC_DEF_COLOR_V(512); + break; + case DRM_FORMAT_YUV420_8BIT: + priv->viu.vd1_afbc_dec_def_color |= + AFBC_DEF_COLOR_U(128) | + AFBC_DEF_COLOR_V(128); + break; + } + + priv->viu.vd1_if0_gen_reg = 0; + priv->viu.vd1_if0_canvas0 = 0; + priv->viu.viu_vd1_fmt_ctrl = 0; + } else { + priv->viu.vd1_afbc = false; + + priv->viu.vd1_if0_gen_reg = VD_URGENT_CHROMA | + VD_URGENT_LUMA | + VD_HOLD_LINES(9) | + VD_CHRO_RPT_LASTL_CTRL | + VD_ENABLE; + }
/* Setup scaler params */ meson_overlay_setup_scaler_params(priv, plane, interlace_mode); @@ -370,6 +544,7 @@ static void meson_overlay_atomic_update(struct drm_plane *plane, priv->viu.vd1_if0_gen_reg2 = 0; priv->viu.viu_vd1_fmt_ctrl = 0;
+ /* None will match for AFBC Only formats */ switch (fb->format->format) { /* TOFIX DRM_FORMAT_RGB888 should be supported */ case DRM_FORMAT_YUYV: @@ -488,13 +663,28 @@ static void meson_overlay_atomic_update(struct drm_plane *plane, priv->viu.vd1_stride0 = fb->pitches[0]; priv->viu.vd1_height0 = drm_format_info_plane_height(fb->format, - fb->height, 0); + fb->height, 0); DRM_DEBUG("plane 0 addr 0x%x stride %d height %d\n", priv->viu.vd1_addr0, priv->viu.vd1_stride0, priv->viu.vd1_height0); }
+ if (priv->viu.vd1_afbc) { + unsigned long body_size; + + /* Default mode is 4k per superblock */ + body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) * + (ALIGN(priv->viu.vd1_height0, 32) / 32) * + 4096; + + priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4; + + /* Header is after body content */ + priv->viu.vd1_afbc_head_addr = (priv->viu.vd1_addr0 + + body_size) >> 4; + } + priv->viu.vd1_enabled = true;
spin_unlock_irqrestore(&priv->drm->event_lock, flags); @@ -531,6 +721,42 @@ static const struct drm_plane_helper_funcs meson_overlay_helper_funcs = { .prepare_fb = drm_gem_fb_prepare_fb, };
+static bool meson_overlay_format_mod_supported(struct drm_plane *plane, + u32 format, u64 modifier) +{ + if (modifier == DRM_FORMAT_MOD_LINEAR && + format != DRM_FORMAT_YUV420_8BIT && + format != DRM_FORMAT_YUV420_10BIT) + return true; + + if ((modifier & DRM_FORMAT_MOD_AMLOGIC_FBC(0, 0)) == + DRM_FORMAT_MOD_AMLOGIC_FBC(0, 0)) { + unsigned int layout = modifier & + DRM_FORMAT_MOD_AMLOGIC_FBC( + __fourcc_mod_amlogic_layout_mask, 0); + + if (format != DRM_FORMAT_YUV420_8BIT && + format != DRM_FORMAT_YUV420_10BIT) { + DRM_DEBUG_KMS("%llx invalid format 0x%08x\n", + modifier, format); + return false; + } + + if (layout != AMLOGIC_FBC_LAYOUT_BASIC) { + DRM_DEBUG_KMS("%llx invalid layout %x\n", + modifier, layout); + return false; + } + + return true; + } + + DRM_DEBUG_KMS("invalid modifier %llx for format 0x%08x\n", + modifier, format); + + return false; +} + static const struct drm_plane_funcs meson_overlay_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, @@ -538,6 +764,7 @@ static const struct drm_plane_funcs meson_overlay_funcs = { .reset = drm_atomic_helper_plane_reset, .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, + .format_mod_supported = meson_overlay_format_mod_supported, };
static const uint32_t supported_drm_formats[] = { @@ -549,6 +776,14 @@ static const uint32_t supported_drm_formats[] = { DRM_FORMAT_YUV420, DRM_FORMAT_YUV411, DRM_FORMAT_YUV410, + DRM_FORMAT_YUV420_8BIT, /* Amlogic FBC Only */ + DRM_FORMAT_YUV420_10BIT, /* Amlogic FBC Only */ +}; + +static const uint64_t format_modifiers[] = { + DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, 0), + DRM_FORMAT_MOD_LINEAR, + DRM_FORMAT_MOD_INVALID, };
int meson_overlay_create(struct meson_drm *priv) @@ -570,7 +805,7 @@ int meson_overlay_create(struct meson_drm *priv) &meson_overlay_funcs, supported_drm_formats, ARRAY_SIZE(supported_drm_formats), - NULL, + format_modifiers, DRM_PLANE_TYPE_OVERLAY, "meson_overlay_plane");
drm_plane_helper_add(plane, &meson_overlay_helper_funcs);
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use a different superblock size for the Memory Saving mode.
Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com --- drivers/gpu/drm/meson/meson_overlay.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_overlay.c b/drivers/gpu/drm/meson/meson_overlay.c index 293f606ba164..1566a887d482 100644 --- a/drivers/gpu/drm/meson/meson_overlay.c +++ b/drivers/gpu/drm/meson/meson_overlay.c @@ -486,6 +486,10 @@ static void meson_overlay_atomic_update(struct drm_plane *plane, AFBC_HOLD_LINE_NUM(8) | AFBC_BURST_LEN(2);
+ if (fb->modifier & DRM_FORMAT_MOD_AMLOGIC_FBC(0, + AMLOGIC_FBC_OPTION_MEM_SAVING)) + priv->viu.vd1_afbc_mode |= AFBC_BLK_MEM_MODE; + priv->viu.vd1_afbc_en = 0x1600 | AFBC_DEC_ENABLE;
priv->viu.vd1_afbc_conv_ctrl = AFBC_CONV_LBUF_LEN(256); @@ -671,12 +675,17 @@ static void meson_overlay_atomic_update(struct drm_plane *plane, }
if (priv->viu.vd1_afbc) { + /* Default mode is 4k per superblock */ + unsigned long block_size = 4096; unsigned long body_size;
- /* Default mode is 4k per superblock */ + /* 8bit mem saving mode is 3072bytes per superblock */ + if (priv->viu.vd1_afbc_mode & AFBC_BLK_MEM_MODE) + block_size = 3072; + body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) * (ALIGN(priv->viu.vd1_height0, 32) / 32) * - 4096; + block_size;
priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4;
@@ -734,6 +743,9 @@ static bool meson_overlay_format_mod_supported(struct drm_plane *plane, unsigned int layout = modifier & DRM_FORMAT_MOD_AMLOGIC_FBC( __fourcc_mod_amlogic_layout_mask, 0); + unsigned int options = + (modifier >> __fourcc_mod_amlogic_options_shift) & + __fourcc_mod_amlogic_options_mask;
if (format != DRM_FORMAT_YUV420_8BIT && format != DRM_FORMAT_YUV420_10BIT) { @@ -748,6 +760,13 @@ static bool meson_overlay_format_mod_supported(struct drm_plane *plane, return false; }
+ if (options && + options != AMLOGIC_FBC_OPTION_MEM_SAVING) { + DRM_DEBUG_KMS("%llx invalid layout %x\n", + modifier, layout); + return false; + } + return true; }
@@ -781,6 +800,8 @@ static const uint32_t supported_drm_formats[] = { };
static const uint64_t format_modifiers[] = { + DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, + AMLOGIC_FBC_OPTION_MEM_SAVING), DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, 0), DRM_FORMAT_MOD_LINEAR, DRM_FORMAT_MOD_INVALID,
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use read the FBC header as Scatter Memory layout reference.
Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com --- drivers/gpu/drm/meson/meson_overlay.c | 53 ++++++++++++++++++--------- 1 file changed, 35 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_overlay.c b/drivers/gpu/drm/meson/meson_overlay.c index 1566a887d482..1f7b2055e012 100644 --- a/drivers/gpu/drm/meson/meson_overlay.c +++ b/drivers/gpu/drm/meson/meson_overlay.c @@ -490,6 +490,10 @@ static void meson_overlay_atomic_update(struct drm_plane *plane, AMLOGIC_FBC_OPTION_MEM_SAVING)) priv->viu.vd1_afbc_mode |= AFBC_BLK_MEM_MODE;
+ if ((fb->modifier & __fourcc_mod_amlogic_layout_mask) == + AMLOGIC_FBC_LAYOUT_SCATTER) + priv->viu.vd1_afbc_mode |= AFBC_SCATTER_MODE; + priv->viu.vd1_afbc_en = 0x1600 | AFBC_DEC_ENABLE;
priv->viu.vd1_afbc_conv_ctrl = AFBC_CONV_LBUF_LEN(256); @@ -675,23 +679,32 @@ static void meson_overlay_atomic_update(struct drm_plane *plane, }
if (priv->viu.vd1_afbc) { - /* Default mode is 4k per superblock */ - unsigned long block_size = 4096; - unsigned long body_size; - - /* 8bit mem saving mode is 3072bytes per superblock */ - if (priv->viu.vd1_afbc_mode & AFBC_BLK_MEM_MODE) - block_size = 3072; - - body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) * - (ALIGN(priv->viu.vd1_height0, 32) / 32) * - block_size; - - priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4; - - /* Header is after body content */ - priv->viu.vd1_afbc_head_addr = (priv->viu.vd1_addr0 + - body_size) >> 4; + if (priv->viu.vd1_afbc_mode & AFBC_SCATTER_MODE) { + /* + * In Scatter mode, the header contains the physical + * body content layout, thus the body content + * size isn't needed. + */ + priv->viu.vd1_afbc_head_addr = priv->viu.vd1_addr0 >> 4; + priv->viu.vd1_afbc_body_addr = 0; + } else { + /* Default mode is 4k per superblock */ + unsigned long block_size = 4096; + unsigned long body_size; + + /* 8bit mem saving mode is 3072bytes per superblock */ + if (priv->viu.vd1_afbc_mode & AFBC_BLK_MEM_MODE) + block_size = 3072; + + body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) * + (ALIGN(priv->viu.vd1_height0, 32) / 32) * + block_size; + + priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4; + /* Header is after body content */ + priv->viu.vd1_afbc_head_addr = (priv->viu.vd1_addr0 + + body_size) >> 4; + } }
priv->viu.vd1_enabled = true; @@ -754,7 +767,8 @@ static bool meson_overlay_format_mod_supported(struct drm_plane *plane, return false; }
- if (layout != AMLOGIC_FBC_LAYOUT_BASIC) { + if (layout != AMLOGIC_FBC_LAYOUT_BASIC && + layout != AMLOGIC_FBC_LAYOUT_SCATTER) { DRM_DEBUG_KMS("%llx invalid layout %x\n", modifier, layout); return false; @@ -800,8 +814,11 @@ static const uint32_t supported_drm_formats[] = { };
static const uint64_t format_modifiers[] = { + DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_SCATTER, + AMLOGIC_FBC_OPTION_MEM_SAVING), DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, AMLOGIC_FBC_OPTION_MEM_SAVING), + DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_SCATTER, 0), DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, 0), DRM_FORMAT_MOD_LINEAR, DRM_FORMAT_MOD_INVALID,
Since the VD1 Amlogic FBC decoder is now configured by the overlay driver, commit the right registers to decode the Amlogic FBC frame.
Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com --- drivers/gpu/drm/meson/meson_crtc.c | 118 +++++++++++++++++++++-------- 1 file changed, 88 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c index e66b6271ff58..2854272dc2d9 100644 --- a/drivers/gpu/drm/meson/meson_crtc.c +++ b/drivers/gpu/drm/meson/meson_crtc.c @@ -291,6 +291,10 @@ static void meson_crtc_enable_vd1(struct meson_drm *priv) VPP_VD1_PREBLEND | VPP_VD1_POSTBLEND | VPP_COLOR_MNG_ENABLE, priv->io_base + _REG(VPP_MISC)); + + writel_bits_relaxed(VIU_CTRL0_AFBC_TO_VD1, + priv->viu.vd1_afbc ? VIU_CTRL0_AFBC_TO_VD1 : 0, + priv->io_base + _REG(VIU_MISC_CTRL0)); }
static void meson_g12a_crtc_enable_vd1(struct meson_drm *priv) @@ -300,6 +304,10 @@ static void meson_g12a_crtc_enable_vd1(struct meson_drm *priv) VD_BLEND_POSTBLD_SRC_VD1 | VD_BLEND_POSTBLD_PREMULT_EN, priv->io_base + _REG(VD1_BLEND_SRC_CTRL)); + + writel_relaxed(priv->viu.vd1_afbc ? + (VD1_AXI_SEL_AFBC | AFBC_VD1_SEL) : 0, + priv->io_base + _REG(VD1_AFBCD0_MISC_CTRL)); }
void meson_crtc_irq(struct meson_drm *priv) @@ -383,36 +391,86 @@ void meson_crtc_irq(struct meson_drm *priv) /* Update the VD1 registers */ if (priv->viu.vd1_enabled && priv->viu.vd1_commit) {
- switch (priv->viu.vd1_planes) { - case 3: - meson_canvas_config(priv->canvas, - priv->canvas_id_vd1_2, - priv->viu.vd1_addr2, - priv->viu.vd1_stride2, - priv->viu.vd1_height2, - MESON_CANVAS_WRAP_NONE, - MESON_CANVAS_BLKMODE_LINEAR, - MESON_CANVAS_ENDIAN_SWAP64); - /* fallthrough */ - case 2: - meson_canvas_config(priv->canvas, - priv->canvas_id_vd1_1, - priv->viu.vd1_addr1, - priv->viu.vd1_stride1, - priv->viu.vd1_height1, - MESON_CANVAS_WRAP_NONE, - MESON_CANVAS_BLKMODE_LINEAR, - MESON_CANVAS_ENDIAN_SWAP64); - /* fallthrough */ - case 1: - meson_canvas_config(priv->canvas, - priv->canvas_id_vd1_0, - priv->viu.vd1_addr0, - priv->viu.vd1_stride0, - priv->viu.vd1_height0, - MESON_CANVAS_WRAP_NONE, - MESON_CANVAS_BLKMODE_LINEAR, - MESON_CANVAS_ENDIAN_SWAP64); + if (priv->viu.vd1_afbc) { + writel_relaxed(priv->viu.vd1_afbc_head_addr, + priv->io_base + + _REG(AFBC_HEAD_BADDR)); + writel_relaxed(priv->viu.vd1_afbc_body_addr, + priv->io_base + + _REG(AFBC_BODY_BADDR)); + writel_relaxed(priv->viu.vd1_afbc_en, + priv->io_base + + _REG(AFBC_ENABLE)); + writel_relaxed(priv->viu.vd1_afbc_mode, + priv->io_base + + _REG(AFBC_MODE)); + writel_relaxed(priv->viu.vd1_afbc_size_in, + priv->io_base + + _REG(AFBC_SIZE_IN)); + writel_relaxed(priv->viu.vd1_afbc_dec_def_color, + priv->io_base + + _REG(AFBC_DEC_DEF_COLOR)); + writel_relaxed(priv->viu.vd1_afbc_conv_ctrl, + priv->io_base + + _REG(AFBC_CONV_CTRL)); + writel_relaxed(priv->viu.vd1_afbc_size_out, + priv->io_base + + _REG(AFBC_SIZE_OUT)); + writel_relaxed(priv->viu.vd1_afbc_vd_cfmt_ctrl, + priv->io_base + + _REG(AFBC_VD_CFMT_CTRL)); + writel_relaxed(priv->viu.vd1_afbc_vd_cfmt_w, + priv->io_base + + _REG(AFBC_VD_CFMT_W)); + writel_relaxed(priv->viu.vd1_afbc_mif_hor_scope, + priv->io_base + + _REG(AFBC_MIF_HOR_SCOPE)); + writel_relaxed(priv->viu.vd1_afbc_mif_ver_scope, + priv->io_base + + _REG(AFBC_MIF_VER_SCOPE)); + writel_relaxed(priv->viu.vd1_afbc_pixel_hor_scope, + priv->io_base+ + _REG(AFBC_PIXEL_HOR_SCOPE)); + writel_relaxed(priv->viu.vd1_afbc_pixel_ver_scope, + priv->io_base + + _REG(AFBC_PIXEL_VER_SCOPE)); + writel_relaxed(priv->viu.vd1_afbc_vd_cfmt_h, + priv->io_base + + _REG(AFBC_VD_CFMT_H)); + } else { + switch (priv->viu.vd1_planes) { + case 3: + meson_canvas_config(priv->canvas, + priv->canvas_id_vd1_2, + priv->viu.vd1_addr2, + priv->viu.vd1_stride2, + priv->viu.vd1_height2, + MESON_CANVAS_WRAP_NONE, + MESON_CANVAS_BLKMODE_LINEAR, + MESON_CANVAS_ENDIAN_SWAP64); + fallthrough; + case 2: + meson_canvas_config(priv->canvas, + priv->canvas_id_vd1_1, + priv->viu.vd1_addr1, + priv->viu.vd1_stride1, + priv->viu.vd1_height1, + MESON_CANVAS_WRAP_NONE, + MESON_CANVAS_BLKMODE_LINEAR, + MESON_CANVAS_ENDIAN_SWAP64); + fallthrough; + case 1: + meson_canvas_config(priv->canvas, + priv->canvas_id_vd1_0, + priv->viu.vd1_addr0, + priv->viu.vd1_stride0, + priv->viu.vd1_height0, + MESON_CANVAS_WRAP_NONE, + MESON_CANVAS_BLKMODE_LINEAR, + MESON_CANVAS_ENDIAN_SWAP64); + } + + writel_relaxed(0, priv->io_base + _REG(AFBC_ENABLE)); }
writel_relaxed(priv->viu.vd1_if0_gen_reg,
On 03/07/2020 10:07, Neil Armstrong wrote:
Amlogic uses a proprietary lossless image compression protocol and format for their hardware video codec accelerators, either video decoders or video input encoders.
It considerably reduces memory bandwidth while writing and reading frames in memory.
The underlying storage is considered to be 3 components, 8bit or 10-bit per component, YCbCr 420, single plane :
- DRM_FORMAT_YUV420_8BIT
- DRM_FORMAT_YUV420_10BIT
This modifier will be notably added to DMA-BUF frames imported from the V4L2 Amlogic VDEC decoder.
At least two layout are supported :
- Basic: composed of a body and a header
- Scatter: the buffer is filled with a IOMMU scatter table referring to the encoder current memory layout. This mode if more efficient in terms of memory allocation but frames are not dumpable and only valid during until the buffer is freed and back in control of the encoder
At least two options are supported :
- Memory saving: when the pixel bpp is 8b, the size of the superblock can be reduced, thus saving memory.
This serie adds the missing register, updated the FBC decoder registers content to be committed by the crtc code.
The Amlogic FBC has been tested with compressed content from the Amlogic HW VP9 decoder on S905X (GXL), S905D2 (G12A) and S905X3 (SM1) in 8bit (Scatter+Mem Saving on G12A/SM1, Mem Saving on GXL) and 10bit (Scatter on G12A/SM1, default on GXL).
It's expected to work as-is on GXM and G12B SoCs.
Changes since v8 at [8]:
- added clarification of scatter mmap behavior as suggested by daniel
- added ack and review tags
Changes since v7 at [7]:
- rebased on drm-misc-next
- removed spurious DEBUG in drivers/gpu/drm/meson/meson_overlay.c
Changes since v6 at [6]:
- rebased on drm-misc-next (after drm-misc-next-2020-05-14)
- updated patch 1 commit log for completion
Changes since v5 at [5]:
- merged all fourcc patches in 1
- fixed fourcc definition to have only a single DRM_MOD_
- fixed 2 checkpatch issues
Changes since v4 at [4]:
- added layout and options mask
- cosmetic changes in fourcc.h
- fixed mod check using the masks
- fixed plane apply using the masks
Changes since v3 at [3]:
- added dropped fourcc patch for scatter
- fixed build of last patch
Changes since v2 at [2]:
- Added "BASIC" layout and moved the SCATTER mode as layout, making BASIC and SCATTER layout exclusives
- Moved the Memory Saving at bit 8 for options fields
- Split fourcc and overlay patch to introduce basic, mem saving and then scatter in separate patches
- Added comment about "transferability" of the buffers
Changes since v1 at [1]:
- s/VD1_AXI_SEL_AFB/VD1_AXI_SEL_AFBC/ into meson_registers.h
[1] https://patchwork.freedesktop.org/series/73722/#rev1 [2] https://patchwork.freedesktop.org/series/73722/#rev2 [3] https://patchwork.freedesktop.org/series/73722/#rev3 [4] https://patchwork.freedesktop.org/series/73722/#rev4 [5] https://patchwork.freedesktop.org/series/73722/#rev5 [6] https://patchwork.freedesktop.org/series/73722/#rev6 [7] https://patchwork.freedesktop.org/series/73722/#rev7 [7] https://patchwork.freedesktop.org/series/73722/#rev8
Neil Armstrong (6): drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression drm/meson: add Amlogic Video FBC registers drm/meson: overlay: setup overlay for Amlogic FBC drm/meson: overlay: setup overlay for Amlogic FBC Memory Saving mode drm/meson: overlay: setup overlay for Amlogic FBC Scatter Memory layout drm/meson: crtc: handle commit of Amlogic FBC frames
drivers/gpu/drm/meson/meson_crtc.c | 118 +++++++--- drivers/gpu/drm/meson/meson_drv.h | 16 ++ drivers/gpu/drm/meson/meson_overlay.c | 289 +++++++++++++++++++++++- drivers/gpu/drm/meson/meson_registers.h | 22 ++ include/uapi/drm/drm_fourcc.h | 81 +++++++ 5 files changed, 488 insertions(+), 38 deletions(-)
Applied to drm-misc-next
dri-devel@lists.freedesktop.org
-
Neil Armstrong -
Simon Ser