Decoder input LVDS format is a property of the decoder chip or even its strapping. Handle data-mapping the same way lvds-panel does. In case data-mapping is not present, do nothing, since there are still legacy bindings which do not specify this property.

Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Marek Vasut marex@denx.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Sam Ravnborg sam@ravnborg.org To: dri-devel@lists.freedesktop.org --- V2: - Move the data-mapping to endpoint V3: - Rebase on V2 submitted a while ago, reinstate changelog - Use .atomic_get_input_bus_fmts for the decoder, separate funcs for encoder V4: - No change V5: - Move the data-mapping property to port@0 , decoder LVDS input - Add RB from Laurent V6: - Turn missing data-mapping into warning, since the driver does continue in legacy probing mode without it. --- drivers/gpu/drm/bridge/lvds-codec.c | 76 ++++++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c index dcf579a4cf83..ad460b96c0a3 100644 --- a/drivers/gpu/drm/bridge/lvds-codec.c +++ b/drivers/gpu/drm/bridge/lvds-codec.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/regulator/consumer.h>

+#include <drm/drm_atomic_helper.h> #include <drm/drm_bridge.h> #include <drm/drm_panel.h>

@@ -22,6 +23,7 @@ struct lvds_codec { struct regulator *vcc; struct gpio_desc *powerdown_gpio; u32 connector_type; + unsigned int bus_format; };

static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge) @@ -74,12 +76,50 @@ static const struct drm_bridge_funcs funcs = { .disable = lvds_codec_disable, };

+#define MAX_INPUT_SEL_FORMATS 1 +static u32 * +lvds_codec_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + struct lvds_codec *lvds_codec = to_lvds_codec(bridge); + u32 *input_fmts; + + *num_input_fmts = 0; + + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), + GFP_KERNEL); + if (!input_fmts) + return NULL; + + input_fmts[0] = lvds_codec->bus_format; + *num_input_fmts = MAX_INPUT_SEL_FORMATS; + + return input_fmts; +} + +static const struct drm_bridge_funcs funcs_decoder = { + .attach = lvds_codec_attach, + .enable = lvds_codec_enable, + .disable = lvds_codec_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_get_input_bus_fmts = lvds_codec_atomic_get_input_bus_fmts, +}; + static int lvds_codec_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *panel_node; + struct device_node *bus_node; struct drm_panel *panel; struct lvds_codec *lvds_codec; + const char *mapping; + int ret;

lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); if (!lvds_codec) @@ -119,13 +159,47 @@ static int lvds_codec_probe(struct platform_device *pdev) if (IS_ERR(lvds_codec->panel_bridge)) return PTR_ERR(lvds_codec->panel_bridge);

+ lvds_codec->bridge.funcs = &funcs; + + /* + * Decoder input LVDS format is a property of the decoder chip or even + * its strapping. Handle data-mapping the same way lvds-panel does. In + * case data-mapping is not present, do nothing, since there are still + * legacy bindings which do not specify this property. + */ + if (lvds_codec->connector_type != DRM_MODE_CONNECTOR_LVDS) { + bus_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); + if (!bus_node) { + dev_dbg(dev, "bus DT node not found\n"); + return -ENXIO; + } + + ret = of_property_read_string(bus_node, "data-mapping", + &mapping); + of_node_put(bus_node); + if (ret < 0) { + dev_warn(dev, "missing 'data-mapping' DT property\n"); + } else { + if (!strcmp(mapping, "jeida-18")) { + lvds_codec->bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG; + } else if (!strcmp(mapping, "jeida-24")) { + lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; + } else if (!strcmp(mapping, "vesa-24")) { + lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG; + } else { + dev_err(dev, "invalid 'data-mapping' DT property\n"); + return -EINVAL; + } + lvds_codec->bridge.funcs = &funcs_decoder; + } + } + /* * The panel_bridge bridge is attached to the panel's of_node, * but we need a bridge attached to our of_node for our user * to look up. */ lvds_codec->bridge.of_node = dev->of_node; - lvds_codec->bridge.funcs = &funcs; drm_bridge_add(&lvds_codec->bridge);

platform_set_drvdata(pdev, lvds_codec);