[PATCH 1/4] fbdev: omapfb: panel-lgphilips-lb035q02: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed.
Signed-off-by: Cai Huoqing caihuoqing@baidu.com --- .../fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c index 1bec7a4422e8..6befd22dbd5c 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c @@ -244,10 +244,9 @@ static int lb035q02_probe_of(struct spi_device *spi) struct gpio_desc *gpio;
gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW); - if (IS_ERR(gpio)) { - dev_err(&spi->dev, "failed to parse enable gpio\n"); - return PTR_ERR(gpio); - } + if (IS_ERR(gpio)) + return dev_err_probe(&spi->dev, PTR_ERR(gpio), + "failed to parse enable gpio\n");
ddata->enable_gpio = gpio;
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed.
Signed-off-by: Cai Huoqing caihuoqing@baidu.com --- drivers/video/fbdev/omap/lcd_ams_delta.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c index 8e54aae544a0..bbf871f9d862 100644 --- a/drivers/video/fbdev/omap/lcd_ams_delta.c +++ b/drivers/video/fbdev/omap/lcd_ams_delta.c @@ -131,18 +131,14 @@ static int ams_delta_panel_probe(struct platform_device *pdev) int ret;
gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW); - if (IS_ERR(gpiod_vblen)) { - ret = PTR_ERR(gpiod_vblen); - dev_err(&pdev->dev, "VBLEN GPIO request failed (%d)\n", ret); - return ret; - } + if (IS_ERR(gpiod_vblen)) + return dev_err_probe(&pdev->dev, PTR_ERR(gpiod_vblen), + "VBLEN GPIO request failed\n");
gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW); - if (IS_ERR(gpiod_ndisp)) { - ret = PTR_ERR(gpiod_ndisp); - dev_err(&pdev->dev, "NDISP GPIO request failed (%d)\n", ret); - return ret; - } + if (IS_ERR(gpiod_ndisp)) + return dev_err_probe(&pdev->dev, PTR_ERR(gpiod_ndisp), + "NDISP GPIO request failed\n");
#ifdef CONFIG_LCD_CLASS_DEVICE lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed.
Signed-off-by: Cai Huoqing caihuoqing@baidu.com --- .../fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c index 602324c5c9f9..f1072c319de8 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c @@ -211,10 +211,9 @@ static int sharp_ls_probe_of(struct platform_device *pdev) int r;
ddata->vcc = devm_regulator_get(&pdev->dev, "envdd"); - if (IS_ERR(ddata->vcc)) { - dev_err(&pdev->dev, "failed to get regulator\n"); - return PTR_ERR(ddata->vcc); - } + if (IS_ERR(ddata->vcc)) + return dev_err_probe(&pdev->dev, PTR_ERR(ddata->vcc), + "failed to get regulator\n");
/* lcd INI */ r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed.
Signed-off-by: Cai Huoqing caihuoqing@baidu.com --- .../video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c index afac1d9445aa..3db0232c31ab 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c @@ -517,8 +517,7 @@ static int tpo_td043_probe(struct spi_device *spi)
ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc"); if (IS_ERR(ddata->vcc_reg)) { - dev_err(&spi->dev, "failed to get LCD VCC regulator\n"); - r = PTR_ERR(ddata->vcc_reg); + r = dev_err_probe(&spi->dev, r, "failed to get LCD VCC regulator\n"); goto err_regulator; }
dri-devel@lists.freedesktop.org
-
Cai Huoqing