[Bug 66767] New: atombios stuck in loop for more than 5secs aborting after suspend to ram
https://bugs.freedesktop.org/show_bug.cgi?id=66767
Priority: medium Bug ID: 66767 Assignee: dri-devel@lists.freedesktop.org Summary: atombios stuck in loop for more than 5secs aborting after suspend to ram Severity: normal Classification: Unclassified OS: All Reporter: johannes.hirte@fem.tu-ilmenau.de Hardware: Other Status: NEW Version: DRI CVS Component: DRM/Radeon Product: DRI
With the new dpm code for linux-3.11 I get the following error after S2R resume:
[ 1182.615704] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 1182.615707] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CA86 (len 67, WS 0, PS 0) @ 0xCAB5
complete dmesg from the suspend-resume-cycle:
[ 1175.956924] PM: Syncing filesystems ... done. [ 1176.064389] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1176.065709] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 1176.066809] Suspending console(s) (use no_console_suspend to debug) [ 1176.078054] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1176.078814] sd 0:0:0:0: [sda] Stopping disk [ 1176.719313] [drm:rv770_stop_dpm] *ERROR* Could not force DPM to low. [ 1176.727515] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000015e418 and cpu addr 0xffffc9000229d418 [ 1176.914976] radeon 0000:01:00.0: power state changed by ACPI to D3cold [ 1176.915055] PM: suspend of devices complete after 836.927 msecs [ 1176.915224] PM: late suspend of devices complete after 0.167 msecs [ 1176.936919] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 1176.947894] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 1176.947994] PM: noirq suspend of devices complete after 32.756 msecs [ 1176.948042] ACPI: Preparing to enter system sleep state S3 [ 1176.952092] PM: Saving platform NVS memory [ 1176.956159] Disabling non-boot CPUs ... [ 1176.957567] smpboot: CPU 1 is now offline [ 1176.958200] ACPI: Low-level resume complete [ 1176.958240] PM: Restoring platform NVS memory [ 1176.959889] PCI-DMA: Resuming GART IOMMU [ 1176.959890] PCI-DMA: Restoring GART aperture settings [ 1176.960206] Enabling non-boot CPUs ... [ 1176.960247] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1176.971296] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu [ 1176.971298] perf: IBS APIC setup failed on cpu #1 [ 1176.973412] process: Switch to broadcast mode on CPU1 [ 1176.973606] CPU1 is up [ 1176.974596] ACPI: Waking up from system sleep state S3 [ 1176.975097] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 1176.986024] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 1177.008185] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 1177.052129] PM: noirq resume of devices complete after 77.225 msecs [ 1177.052251] PM: early resume of devices complete after 0.096 msecs [ 1177.052731] pcieport 0000:00:04.0: System wakeup disabled by ACPI [ 1177.053784] ath: phy0: ASPM enabled: 0x42 [ 1177.054394] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 1177.055456] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 1177.058107] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000). [ 1177.058253] radeon 0000:01:00.0: WB enabled [ 1177.058256] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88011a3a6c00 [ 1177.058258] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88011a3a6c0c [ 1177.059773] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000079b418 and cpu addr 0xffffc9000329c418 [ 1177.076158] [drm] ring test on 0 succeeded in 1 usecs [ 1177.076216] [drm] ring test on 3 succeeded in 1 usecs [ 1177.273577] [drm] ring test on 5 succeeded in 1 usecs [ 1177.273579] [drm] UVD initialized successfully. [ 1177.273613] [drm] ib test on ring 0 succeeded in 0 usecs [ 1177.273643] [drm] ib test on ring 3 succeeded in 1 usecs [ 1177.289078] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 1177.445991] [drm] ib test on ring 5 succeeded [ 1177.451139] switching from power state: [ 1177.451141] ui class: none [ 1177.451142] internal class: boot [ 1177.451143] caps: video [ 1177.451145] uvd vclk: 0 dclk: 0 [ 1177.451147] power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 1177.451148] power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 1177.451148] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 1177.451149] status: c b [ 1177.451150] switching to power state: [ 1177.451150] ui class: performance [ 1177.451151] internal class: none [ 1177.451152] caps: single_disp video [ 1177.451153] uvd vclk: 0 dclk: 0 [ 1177.451154] power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 [ 1177.451155] power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 [ 1177.451155] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 1177.451156] status: r [ 1177.514155] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1177.517425] ata2.00: configured for UDMA/100 [ 1179.452789] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1179.733200] ata1.00: configured for UDMA/133 [ 1179.743904] sd 0:0:0:0: [sda] Starting disk [ 1182.615704] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 1182.615707] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CA86 (len 67, WS 0, PS 0) @ 0xCAB5 [ 1183.611326] PM: resume of devices complete after 6556.955 msecs
https://bugs.freedesktop.org/show_bug.cgi?id=66767
Johannes Hirte johannes.hirte@fem.tu-ilmenau.de changed:
What |Removed |Added ---------------------------------------------------------------------------- Hardware|Other |x86-64 (AMD64) OS|All |Linux (All)
https://bugs.freedesktop.org/show_bug.cgi?id=66767
--- Comment #1 from Alex Deucher agd5f@yahoo.com --- Please attach your full dmesg output. Also, is this a hybrid laptop with multiple GPUs?
https://bugs.freedesktop.org/show_bug.cgi?id=66767
--- Comment #2 from Johannes Hirte johannes.hirte@fem.tu-ilmenau.de --- It's a discrete only gpu, no hybrid. full dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-08587-g496322b (puck@acer) (gcc version 4.8.1 (Gentoo 4.8.1 p1.0, pie-0.5.6) ) #72 SMP PREEMPT Wed Jul 10 10:38:22 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-08587-g496322b root=/dev/sda1 ro pcie_aspm=force radeon.dpm=1 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de555fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de556000-0x00000000de755fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de756000-0x00000000dfd3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfd3f000-0x00000000dfdbefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dfdbf000-0x00000000dfebefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef7000-0x00000000dfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dff00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f7000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Packard Bell EasyNote TK81/SJV52_DN, BIOS V2.14 07/27/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdff00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01c0d000, 0x01c0dfff] PGTABLE [ 0.000000] BRK [0x01c0e000, 0x01c0efff] PGTABLE [ 0.000000] BRK [0x01c0f000, 0x01c0ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M [ 0.000000] BRK [0x01c10000, 0x01c10fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xde555fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xde3fffff] page 2M [ 0.000000] [mem 0xde400000-0xde555fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xde756000-0xdfd3efff] [ 0.000000] [mem 0xde756000-0xde7fffff] page 4k [ 0.000000] [mem 0xde800000-0xdfbfffff] page 2M [ 0.000000] [mem 0xdfc00000-0xdfd3efff] page 4k [ 0.000000] BRK [0x01c11000, 0x01c11fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdfef7000-0xdfefffff] [ 0.000000] [mem 0xdfef7000-0xdfefffff] page 4k [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 00000000dfef6120 0005C (v01 ACRSYS ACRPRDCT 00000003 01000013) [ 0.000000] ACPI: FACP 00000000dfef5000 000F4 (v04 ACRSYS ACRPRDCT 00000003 1025 01000013) [ 0.000000] ACPI: DSDT 00000000dfee6000 0B9EF (v01 ACRSYS ACRPRDCT F0000000 1025 01000013) [ 0.000000] ACPI: FACS 00000000dfe99000 00040 [ 0.000000] ACPI: HPET 00000000dfef4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 00000000dfef3000 00084 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 00000000dfef2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 00000000dfee5000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 00000000dfee4000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 00000000dfee3000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fffa000-0x11fffbfff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xde555fff] [ 0.000000] node 0: [mem 0xde756000-0xdfd3efff] [ 0.000000] node 0: [mem 0xdfef7000-0xdfefffff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 1047270 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14254 pages used for memmap [ 0.000000] DMA32 zone: 912200 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xde556000-0xde755fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfd3f000-0xdfdbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfdbf000-0xdfebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfebf000-0xdfef6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf6ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf7000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf6ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011fc00000 s74944 r8192 d23360 u524288 [ 0.000000] pcpu-alloc: s74944 r8192 d23360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030882 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-08587-g496322b root=/dev/sda1 ro pcie_aspm=force radeon.dpm=1 [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ d4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] [ 0.000000] Memory: 3978996K/4189080K available (4868K kernel code, 521K rwdata, 2272K rodata, 792K init, 760K bss, 210084K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2094.676 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.35 BogoMIPS (lpj=2094676) [ 0.000329] pid_max: default: 32768 minimum: 301 [ 0.000502] Security Framework initialized [ 0.000944] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002648] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003503] Mount-cache hash table entries: 256 [ 0.003876] Initializing cgroup subsys devices [ 0.004030] Initializing cgroup subsys freezer [ 0.004179] Initializing cgroup subsys blkio [ 0.004345] tseg: 00dff00000 [ 0.004348] CPU: Physical Processor ID: 0 [ 0.004497] CPU: Processor Core ID: 0 [ 0.004649] mce: CPU supports 6 MCE banks [ 0.004802] LVT offset 0 assigned for vector 0xf9 [ 0.004949] process: using AMD E400 aware idle routine [ 0.005101] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 tlb_flushall_shift: 4 [ 0.005548] Freeing SMP alternatives memory: 12K (ffffffff81b4a000 - ffffffff81b4d000) [ 0.005699] ACPI: Core revision 20130517 [ 0.012495] ACPI: All ACPI Tables successfully acquired [ 0.618740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.628895] smpboot: CPU0: AMD Athlon(tm) II P320 Dual-Core Processor (fam: 10, model: 06, stepping: 03) [ 0.730757] Performance Events: AMD PMU driver. [ 0.730949] ... version: 0 [ 0.731093] ... bit width: 48 [ 0.731241] ... generic registers: 4 [ 0.731389] ... value mask: 0000ffffffffffff [ 0.731537] ... max period: 00007fffffffffff [ 0.731686] ... fixed-purpose events: 0 [ 0.731837] ... event mask: 000000000000000f [ 0.732020] process: System has AMD C1E enabled [ 0.732171] process: Switch to broadcast mode on CPU0 [ 0.740303] smpboot: Booting Node 0, Processors #1 [ 0.753578] Brought up 2 CPUs [ 0.753631] process: Switch to broadcast mode on CPU1 [ 0.754029] smpboot: Total of 2 processors activated (8378.70 BogoMIPS) [ 0.754743] devtmpfs: initialized [ 0.755202] PM: Registering ACPI NVS region [mem 0xde556000-0xde755fff] (2097152 bytes) [ 0.755396] PM: Registering ACPI NVS region [mem 0xdfdbf000-0xdfebefff] (1048576 bytes) [ 0.755723] xor: measuring software checksum speed [ 0.765196] prefetch64-sse: 6700.000 MB/sec [ 0.775199] generic_sse: 6428.000 MB/sec [ 0.775344] xor: using function: prefetch64-sse (6700.000 MB/sec) [ 0.775541] NET: Registered protocol family 16 [ 0.776363] node 0 link 0: io port [0, ffffff] [ 0.776368] TOM: 00000000e0000000 aka 3584M [ 0.776517] Fam 10h mmconf [mem 0xf7000000-0xf7ffffff] [ 0.776519] node 0 link 0: mmio [a0000, bffff] [ 0.776522] node 0 link 0: mmio [e0000000, f6ffffff] [ 0.776524] node 0 link 0: mmio [f7000000, f7ffffff] ==> none [ 0.776526] node 0 link 0: mmio [f8000000, ffdfffff] [ 0.776528] TOM2: 0000000120000000 aka 4608M [ 0.776673] bus: [bus 00-1f] on node 0 link 0 [ 0.776674] bus: 00 [io 0x0000-0xffff] [ 0.776676] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.776677] bus: 00 [mem 0xe0000000-0xf6ffffff] [ 0.776678] bus: 00 [mem 0xf8000000-0xffffffff] [ 0.776679] bus: 00 [mem 0x120000000-0xfcffffffff] [ 0.776730] ACPI: bus type PCI registered [ 0.777075] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000) [ 0.777357] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820 [ 0.778689] PCI: Using configuration type 1 for base access [ 0.779219] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.779370] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.779519] mtrr: probably your BIOS does not setup all CPUs. [ 0.779663] mtrr: corrected configuration. [ 0.785886] bio: create slab <bio-0> at 0 [ 0.803248] raid6: sse2x1 2609 MB/s [ 0.820225] raid6: sse2x2 3390 MB/s [ 0.837224] raid6: sse2x4 3500 MB/s [ 0.837374] raid6: using algorithm sse2x4 (3500 MB/s) [ 0.837523] raid6: using intx1 recovery algorithm [ 0.837803] ACPI: Added _OSI(Module Device) [ 0.837949] ACPI: Added _OSI(Processor Device) [ 0.838097] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.838258] ACPI: Added _OSI(Processor Aggregator Device) [ 0.840317] ACPI: EC: Look up EC in DSDT [ 0.842463] ACPI: Executed 1 blocks of module-level executable AML code [ 0.847030] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.868819] ACPI: Interpreter enabled [ 0.868979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2_] (20130517/hwxface-571) [ 0.872169] ACPI: (supports S0 S1 S3 S4 S5) [ 0.872327] ACPI: Using IOAPIC for interrupt routing [ 0.872731] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.873121] ACPI: No dock devices found. [ 1.071674] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.072651] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff]) [ 1.072945] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff]) [ 1.073215] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge [ 1.073561] PCI host bridge to bus 0000:00 [ 1.073707] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.073853] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.073999] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.074149] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.074295] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 1.074451] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 1.074598] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 1.074749] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 1.074894] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 1.075040] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 1.075186] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 1.075351] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 1.075502] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 1.075652] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 1.075802] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf6ffffff] [ 1.075952] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff] [ 1.076106] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 1.076268] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 1.076534] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 1.076581] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.076626] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.076944] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 1.076990] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.077040] pci 0000:00:04.0: System wakeup disabled by ACPI [ 1.077363] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 [ 1.077407] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.077455] pci 0000:00:05.0: System wakeup disabled by ACPI [ 1.077742] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 1.077765] pci 0000:00:11.0: reg 0x10: [io 0x7038-0x703f] [ 1.077775] pci 0000:00:11.0: reg 0x14: [io 0x704c-0x704f] [ 1.077785] pci 0000:00:11.0: reg 0x18: [io 0x7030-0x7037] [ 1.077794] pci 0000:00:11.0: reg 0x1c: [io 0x7048-0x704b] [ 1.077803] pci 0000:00:11.0: reg 0x20: [io 0x7010-0x701f] [ 1.077813] pci 0000:00:11.0: reg 0x24: [mem 0xf2207000-0xf22073ff] [ 1.078008] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 1.078022] pci 0000:00:12.0: reg 0x10: [mem 0xf2206000-0xf2206fff] [ 1.078108] pci 0000:00:12.0: System wakeup disabled by ACPI [ 1.078370] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 1.079522] pci 0000:00:12.2: reg 0x10: [mem 0xf2207500-0xf22075ff] [ 1.086230] pci 0000:00:12.2: supports D1 D2 [ 1.086234] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.086337] pci 0000:00:12.2: System wakeup disabled by ACPI [ 1.086655] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 1.086672] pci 0000:00:13.0: reg 0x10: [mem 0xf2205000-0xf2205fff] [ 1.086942] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 1.088101] pci 0000:00:13.2: reg 0x10: [mem 0xf2207400-0xf22074ff] [ 1.094899] pci 0000:00:13.2: supports D1 D2 [ 1.094903] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.095175] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 1.095452] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 1.095478] pci 0000:00:14.2: reg 0x10: [mem 0xf2200000-0xf2203fff 64bit] [ 1.095546] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.095756] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 1.096043] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 1.096149] pci 0000:00:14.4: System wakeup disabled by ACPI [ 1.096447] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 1.096465] pci 0000:00:14.5: reg 0x10: [mem 0xf2204000-0xf2204fff] [ 1.096734] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 1.096976] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 1.097212] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 1.097426] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 1.097664] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 1.098075] pci 0000:01:00.0: [1002:68e0] type 00 class 0x030000 [ 1.098094] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.098104] pci 0000:01:00.0: reg 0x18: [mem 0xf2100000-0xf211ffff 64bit] [ 1.098112] pci 0000:01:00.0: reg 0x20: [io 0x6000-0x60ff] [ 1.098124] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 1.098159] pci 0000:01:00.0: supports D1 D2 [ 1.098380] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300 [ 1.098399] pci 0000:01:00.1: reg 0x10: [mem 0xf2120000-0xf2123fff 64bit] [ 1.098459] pci 0000:01:00.1: supports D1 D2 [ 1.101356] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.101517] pci 0000:00:02.0: bridge window [io 0x6000-0x6fff] [ 1.101520] pci 0000:00:02.0: bridge window [mem 0xf2100000-0xf21fffff] [ 1.101525] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.101732] pci 0000:02:00.0: [14e4:1692] type 00 class 0x020000 [ 1.101757] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf110ffff 64bit] [ 1.101857] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 1.109381] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 1.109543] pci 0000:00:04.0: bridge window [io 0x2000-0x5fff] [ 1.109546] pci 0000:00:04.0: bridge window [mem 0xf1100000-0xf20fffff] [ 1.109550] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref] [ 1.109715] pci 0000:08:00.0: [168c:002e] type 00 class 0x028000 [ 1.109734] pci 0000:08:00.0: reg 0x10: [mem 0xf1000000-0xf100ffff 64bit] [ 1.109817] pci 0000:08:00.0: supports D1 [ 1.109819] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 1.111385] pci 0000:00:05.0: PCI bridge to [bus 08] [ 1.111543] pci 0000:00:05.0: bridge window [mem 0xf1000000-0xf10fffff] [ 1.111759] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode) [ 1.111919] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.111921] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.111923] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.111925] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 1.111927] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 1.111929] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 1.111931] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 1.111933] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 1.111935] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 1.111937] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 1.111939] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 1.111941] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 1.111943] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 1.111945] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode) [ 1.111947] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfed3ffff] (subtractive decode) [ 1.111949] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode) [ 1.111971] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 1.112123] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 1.113163] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.113852] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.114557] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.115238] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.115914] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.116579] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.117236] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.117898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 1.179716] ACPI: Enabled 2 GPEs in block 00 to 1F [ 1.179953] ACPI: _SB_.PCI0: notify handler is installed [ 1.180026] Found 1 acpi root devices [ 1.180090] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 1.180603] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.180757] vgaarb: loaded [ 1.180900] vgaarb: bridge control possible 0000:01:00.0 [ 1.181331] SCSI subsystem initialized [ 1.181479] ACPI: bus type ATA registered [ 1.181821] libata version 3.00 loaded. [ 1.181942] ACPI: bus type USB registered [ 1.182257] usbcore: registered new interface driver usbfs [ 1.182498] usbcore: registered new interface driver hub [ 1.182796] usbcore: registered new device driver usb [ 1.183218] pps_core: LinuxPPS API ver. 1 registered [ 1.183377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.183734] PTP clock support registered [ 1.184109] PCI: Using ACPI for IRQ routing [ 1.184642] PCI: pci_cache_line_size set to 64 bytes [ 1.184704] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 1.184707] e820: reserve RAM buffer [mem 0xde556000-0xdfffffff] [ 1.184708] e820: reserve RAM buffer [mem 0xdfd3f000-0xdfffffff] [ 1.184710] e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff] [ 1.185397] cfg80211: Calling CRDA to update world regulatory domain [ 1.185855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.186161] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.188391] Switched to clocksource hpet [ 1.188678] pnp: PnP ACPI init [ 1.188835] ACPI: bus type PNP registered [ 1.189460] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.189622] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.189773] system 00:00: [mem 0xf7000000-0xf7ffffff] has been reserved [ 1.189922] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.190086] pnp 00:01: [dma 4] [ 1.190256] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.190473] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.190730] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.190937] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.191155] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.191452] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.191687] system 00:07: [io 0x0400-0x04cf] could not be reserved [ 1.191843] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 1.191998] system 00:07: [io 0x04d6] has been reserved [ 1.192148] system 00:07: [io 0x0550] has been reserved [ 1.192298] system 00:07: [io 0x0680-0x06ff] has been reserved [ 1.192476] system 00:07: [io 0x077a] has been reserved [ 1.192627] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 1.192776] system 00:07: [io 0x0c14] has been reserved [ 1.192922] system 00:07: [io 0x0c50-0x0c52] has been reserved [ 1.193068] system 00:07: [io 0x0c6c] has been reserved [ 1.193217] system 00:07: [io 0x0c6f] has been reserved [ 1.193362] system 00:07: [io 0x0cd0-0x0cdb] has been reserved [ 1.193525] system 00:07: [io 0xfd60-0xfd63] has been reserved [ 1.193676] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.193957] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.194114] system 00:08: [mem 0xffe00000-0xffffffff] has been reserved [ 1.194263] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.255532] pnp: PnP ACPI: found 9 devices [ 1.255689] ACPI: bus type PNP unregistered [ 1.266836] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 1.267119] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2140000-0xf215ffff pref] [ 1.267268] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.267445] pci 0000:00:02.0: bridge window [io 0x6000-0x6fff] [ 1.267596] pci 0000:00:02.0: bridge window [mem 0xf2100000-0xf21fffff] [ 1.267748] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.267902] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 1.268051] pci 0000:00:04.0: bridge window [io 0x2000-0x5fff] [ 1.268203] pci 0000:00:04.0: bridge window [mem 0xf1100000-0xf20fffff] [ 1.268350] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref] [ 1.268515] pci 0000:00:05.0: PCI bridge to [bus 08] [ 1.268665] pci 0000:00:05.0: bridge window [mem 0xf1000000-0xf10fffff] [ 1.268818] pci 0000:00:14.4: PCI bridge to [bus 09] [ 1.269345] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.269348] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.269350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.269352] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 1.269354] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 1.269356] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 1.269358] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff] [ 1.269360] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff] [ 1.269362] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff] [ 1.269364] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff] [ 1.269365] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff] [ 1.269367] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff] [ 1.269369] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff] [ 1.269371] pci_bus 0000:00: resource 17 [mem 0xe0000000-0xf6ffffff] [ 1.269373] pci_bus 0000:00: resource 18 [mem 0xf8000000-0xfed3ffff] [ 1.269375] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff] [ 1.269378] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 1.269379] pci_bus 0000:01: resource 1 [mem 0xf2100000-0xf21fffff] [ 1.269382] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 1.269384] pci_bus 0000:02: resource 0 [io 0x2000-0x5fff] [ 1.269386] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf20fffff] [ 1.269388] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref] [ 1.269390] pci_bus 0000:08: resource 1 [mem 0xf1000000-0xf10fffff] [ 1.269393] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7] [ 1.269395] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff] [ 1.269397] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff] [ 1.269399] pci_bus 0000:09: resource 7 [mem 0x000c0000-0x000c3fff] [ 1.269401] pci_bus 0000:09: resource 8 [mem 0x000c4000-0x000c7fff] [ 1.269402] pci_bus 0000:09: resource 9 [mem 0x000c8000-0x000cbfff] [ 1.269404] pci_bus 0000:09: resource 10 [mem 0x000d4000-0x000d7fff] [ 1.269406] pci_bus 0000:09: resource 11 [mem 0x000d8000-0x000dbfff] [ 1.269408] pci_bus 0000:09: resource 12 [mem 0x000dc000-0x000dffff] [ 1.269410] pci_bus 0000:09: resource 13 [mem 0x000e0000-0x000e3fff] [ 1.269412] pci_bus 0000:09: resource 14 [mem 0x000e4000-0x000e7fff] [ 1.269414] pci_bus 0000:09: resource 15 [mem 0x000e8000-0x000ebfff] [ 1.269444] pci_bus 0000:09: resource 16 [mem 0x000ec000-0x000effff] [ 1.269446] pci_bus 0000:09: resource 17 [mem 0xe0000000-0xf6ffffff] [ 1.269448] pci_bus 0000:09: resource 18 [mem 0xf8000000-0xfed3ffff] [ 1.269450] pci_bus 0000:09: resource 19 [mem 0xfed45000-0xffffffff] [ 1.269493] NET: Registered protocol family 2 [ 1.269820] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 1.270166] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.270527] TCP: Hash tables configured (established 32768 bind 32768) [ 1.270736] TCP: reno registered [ 1.270901] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.271086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.271334] NET: Registered protocol family 1 [ 2.048980] pci 0000:01:00.0: Boot video device [ 2.049010] PCI: CLS 64 bytes, default 64 [ 2.049063] PCI-DMA: Disabling AGP. [ 2.049308] PCI-DMA: aperture base @ d4000000 size 65536 KB [ 2.049458] PCI-DMA: using GART IOMMU. [ 2.049608] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.053702] Simple Boot Flag at 0x44 set to 0x1 [ 2.053949] perf: amd_iommu PMU not installed. No support! [ 2.054104] LVT offset 1 assigned for vector 0x400 [ 2.054262] IBS: LVT offset 1 assigned [ 2.054447] perf: AMD IBS detected (0x0000001f) [ 2.055304] microcode: CPU0: patch_level=0x010000b6 [ 2.055462] microcode: CPU1: patch_level=0x010000b6 [ 2.055768] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba [ 2.056029] Scanning for low memory corruption every 60 seconds [ 2.057097] audit: initializing netlink socket (disabled) [ 2.057261] type=2000 audit(1373471414.346:1): initialized [ 2.058346] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.063607] VFS: Disk quotas dquot_6.5.2 [ 2.063932] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.065425] bio: create slab <bio-1> at 1 [ 2.066064] Btrfs loaded [ 2.066220] msgmni has been set to 7900 [ 2.067282] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.067438] io scheduler noop registered [ 2.067586] io scheduler deadline registered [ 2.067852] io scheduler cfq registered (default) [ 2.068272] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.068503] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X [ 2.068662] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X [ 2.069038] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.069741] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.070928] ACPI: AC Adapter [ACAD] (on-line) [ 2.071434] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.071593] ACPI: Power Button [PWRB] [ 2.072085] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 2.072243] ACPI: Sleep Button [SLPB] [ 2.072583] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 2.072811] ACPI: Lid Switch [LID] [ 2.073158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.073316] ACPI: Power Button [PWRF] [ 2.082999] acpi device:04: registered as cooling_device0 [ 2.083189] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 2.083527] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input4 [ 2.084034] ACPI: processor limited to max C-state 1 [ 2.085911] ACPI: Invalid active0 threshold [ 2.087858] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.088013] ACPI: Thermal Zone [THRM] (59 C) [ 2.088526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.089829] Linux agpgart interface v0.103 [ 2.090128] [drm] Initialized drm 1.1.0 20060810 [ 2.090442] [drm] radeon kernel modesetting enabled. [ 2.091114] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1025:0x0489). [ 2.091287] [drm] register mmio base: 0xF2100000 [ 2.091435] [drm] register mmio size: 131072 [ 2.096930] ATOM BIOS: Acer [ 2.097143] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 2.097434] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 2.097585] [drm] Detected VRAM RAM=512M, BAR=256M [ 2.097744] [drm] RAM width 64bits DDR [ 2.097994] [TTM] Zone kernel: Available graphics memory: 2022480 kiB [ 2.098147] [TTM] Initializing pool allocator [ 2.098299] [TTM] Initializing DMA pool allocator [ 2.098476] [drm] radeon: 512M of VRAM memory ready [ 2.098625] [drm] radeon: 512M of GTT memory ready. [ 2.098975] radeon 0000:01:00.0: ffff88011a780c00 unpin not necessary [ 2.457105] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90001d3a418 [ 2.457436] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.458778] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.459172] [drm] Loading CEDAR Microcode [ 2.464713] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 2.465046] radeon 0000:01:00.0: WB enabled [ 2.465197] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88011a3c2c00 [ 2.465485] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88011a3c2c0c [ 2.467077] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000015e418 and cpu addr 0xffffc9000259c418 [ 2.467371] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.467521] [drm] Driver supports precise vblank timestamp query. [ 2.467694] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 2.467708] radeon 0000:01:00.0: radeon: using MSI. [ 2.467909] [drm] radeon: irq initialized. [ 2.484510] [drm] ring test on 0 succeeded in 1 usecs [ 2.484751] [drm] ring test on 3 succeeded in 1 usecs [ 2.682299] [drm] ring test on 5 succeeded in 1 usecs [ 2.682485] [drm] UVD initialized successfully. [ 2.682744] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.682928] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.693129] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.693515] ACPI: Battery Slot [BAT1] (battery present) [ 2.855375] [drm] ib test on ring 5 succeeded [ 2.907149] [drm] radeon atom DIG backlight initialized [ 2.907308] [drm] Radeon Display Connectors [ 2.907458] [drm] Connector 0: [ 2.907606] [drm] LVDS-1 [ 2.907754] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 2.907903] [drm] Encoders: [ 2.908059] [drm] LCD1: INTERNAL_UNIPHY [ 2.908207] [drm] Connector 1: [ 2.908355] [drm] HDMI-A-1 [ 2.908502] [drm] HPD1 [ 2.908649] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 2.908799] [drm] Encoders: [ 2.908946] [drm] DFP1: INTERNAL_UNIPHY1 [ 2.909100] [drm] Connector 2: [ 2.909248] [drm] VGA-1 [ 2.909395] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 2.909545] [drm] Encoders: [ 2.909692] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.909889] [drm] Internal thermal controller with fan control [ 2.910234] == power state 0 == [ 2.910383] ui class: none [ 2.910569] internal class: boot [ 2.910794] caps: video [ 2.911040] uvd vclk: 0 dclk: 0 [ 2.911194] power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.911343] power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.911493] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.911641] status: c r b [ 2.911942] == power state 1 == [ 2.912103] ui class: performance [ 2.912290] internal class: none [ 2.912514] caps: single_disp video [ 2.912776] uvd vclk: 0 dclk: 0 [ 2.912924] power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 [ 2.913094] power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 [ 2.913241] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.913390] status: [ 2.913575] == power state 2 == [ 2.913722] ui class: none [ 2.913908] internal class: uvd [ 2.914151] caps: video [ 2.914374] uvd vclk: 50000 dclk: 40000 [ 2.914523] power level 0 sclk: 50000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.914672] power level 1 sclk: 50000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.914821] power level 2 sclk: 50000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.914981] status: [ 2.915170] == power state 3 == [ 2.915317] ui class: performance [ 2.915503] internal class: none [ 2.915726] caps: video [ 2.915950] uvd vclk: 0 dclk: 0 [ 2.916112] power level 0 sclk: 40500 mclk: 80000 vddc: 900 vddci: 0 [ 2.916261] power level 1 sclk: 40500 mclk: 80000 vddc: 900 vddci: 0 [ 2.916411] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.916559] status: [ 2.916744] == power state 4 == [ 2.916891] ui class: battery [ 2.917090] internal class: none [ 2.917314] caps: single_disp video [ 2.917577] uvd vclk: 0 dclk: 0 [ 2.917725] power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 [ 2.917874] power level 1 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 [ 2.918035] power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 [ 2.918182] status: [ 2.918367] == power state 5 == [ 2.918514] ui class: battery [ 2.918699] internal class: none [ 2.918923] caps: video [ 2.919157] uvd vclk: 0 dclk: 0 [ 2.919305] power level 0 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 [ 2.919454] power level 1 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 [ 2.919604] power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 [ 2.919752] status: [ 2.919937] == power state 6 == [ 2.920090] ui class: battery [ 2.920276] internal class: uvd_hd [ 2.920500] caps: video [ 2.920724] uvd vclk: 40000 dclk: 30000 [ 2.920872] power level 0 sclk: 45000 mclk: 50000 vddc: 1120 vddci: 0 [ 2.921027] power level 1 sclk: 45000 mclk: 50000 vddc: 1120 vddci: 0 [ 2.921177] power level 2 sclk: 45000 mclk: 50000 vddc: 1120 vddci: 0 [ 2.921326] status: [ 2.921511] == power state 7 == [ 2.921658] ui class: battery [ 2.921843] internal class: uvd_sd [ 2.922073] caps: video [ 2.922297] uvd vclk: 10000 dclk: 10000 [ 2.922445] power level 0 sclk: 30000 mclk: 30000 vddc: 1120 vddci: 0 [ 2.922595] power level 1 sclk: 30000 mclk: 30000 vddc: 1120 vddci: 0 [ 2.922744] power level 2 sclk: 30000 mclk: 30000 vddc: 1120 vddci: 0 [ 2.922893] status: [ 2.925087] switching from power state: [ 2.925332] ui class: none [ 2.925519] internal class: boot [ 2.925744] caps: video [ 2.925980] uvd vclk: 0 dclk: 0 [ 2.926129] power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.926279] power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.926430] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.926579] status: c b [ 2.926842] switching to power state: [ 2.926996] ui class: performance [ 2.927183] internal class: none [ 2.927408] caps: single_disp video [ 2.927672] uvd vclk: 0 dclk: 0 [ 2.927821] power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 [ 2.927977] power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 [ 2.928127] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 2.928277] status: r [ 2.934236] [drm] radeon: dpm initialized [ 3.056114] tsc: Refined TSC clocksource calibration: 2094.753 MHz [ 3.326205] [drm] fb mappable at 0xE035F000 [ 3.326415] [drm] vram apper at 0xE0000000 [ 3.326619] [drm] size 4325376 [ 3.326821] [drm] fb depth is 24 [ 3.327024] [drm] pitch is 5632 [ 3.327423] fbcon: radeondrmfb (fb0) is primary device [ 3.929031] Console: switching to colour frame buffer device 170x48 [ 3.933834] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.933871] radeon 0000:01:00.0: registered panic notifier [ 3.934014] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0 [ 3.934509] ahci 0000:00:11.0: version 3.0 [ 3.934718] ahci 0000:00:11.0: irq 44 for MSI/MSI-X [ 3.934782] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.934916] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 3.935658] scsi0 : ahci [ 3.936003] scsi1 : ahci [ 3.936161] ata1: SATA max UDMA/133 abar m1024@0xf2207000 port 0xf2207100 irq 44 [ 3.936212] ata2: SATA max UDMA/133 abar m1024@0xf2207000 port 0xf2207180 irq 44 [ 3.936582] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.936624] ehci-pci: EHCI PCI platform driver [ 3.936844] ehci-pci 0000:00:12.2: setting latency timer to 64 [ 3.936859] ehci-pci 0000:00:12.2: EHCI Host Controller [ 3.936895] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 3.936945] QUIRK: Enable AMD PLL fix [ 3.936947] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.937016] ehci-pci 0000:00:12.2: debug port 1 [ 3.937084] ehci-pci 0000:00:12.2: irq 17, io mem 0xf2207500 [ 3.942410] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.942880] hub 1-0:1.0: USB hub found [ 3.942917] hub 1-0:1.0: 5 ports detected [ 3.943316] ehci-pci 0000:00:13.2: setting latency timer to 64 [ 3.943325] ehci-pci 0000:00:13.2: EHCI Host Controller [ 3.943379] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 3.943455] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.945330] ehci-pci 0000:00:13.2: debug port 1 [ 3.947229] ehci-pci 0000:00:13.2: irq 17, io mem 0xf2207400 [ 3.954413] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.956116] hub 2-0:1.0: USB hub found [ 3.958108] hub 2-0:1.0: 5 ports detected [ 3.960597] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 3.987389] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.988754] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.990238] mousedev: PS/2 mouse device common for all mice [ 3.992122] rtc_cmos 00:03: RTC can wake from S4 [ 3.993715] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.995047] rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs [ 3.996447] cpuidle: using governor ladder [ 3.998467] cpuidle: using governor menu [ 4.000669] hidraw: raw HID events driver (C) Jiri Kosina [ 4.003539] usbcore: registered new interface driver usbhid [ 4.005730] usbhid: USB HID core driver [ 4.008043] TCP: cubic registered [ 4.010104] Initializing XFRM netlink socket [ 4.012498] NET: Registered protocol family 10 [ 4.014979] sit: IPv6 over IPv4 tunneling driver [ 4.017428] NET: Registered protocol family 17 [ 4.018746] Key type dns_resolver registered [ 4.020793] registered taskstats version 1 [ 4.023273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 4.056505] Switched to clocksource tsc [ 4.396559] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.398030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.399497] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.400850] ata2.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100 [ 4.402605] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 [ 4.404010] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.407539] ata1.00: configured for UDMA/133 [ 4.408876] ata2.00: configured for UDMA/100 [ 4.419746] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5 [ 4.421726] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.423222] sd 0:0:0:0: [sda] Write Protect is off [ 4.424512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.424532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.427643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5 [ 4.468373] sda: sda1 sda2 sda3 sda4 [ 4.470484] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.495495] device fsid 43438ef5-adac-46a9-823e-14951ee6866a devid 1 transid 42109 /dev/root [ 4.498769] btrfs: disk space caching is enabled [ 4.500220] btrfs: has skinny extents [ 6.284876] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 6.388545] VFS: Mounted root (btrfs filesystem) readonly on device 0:13. [ 6.400459] devtmpfs: mounted [ 6.403162] Freeing unused kernel memory: 792K (ffffffff81a84000 - ffffffff81b4a000) [ 6.404677] Write protecting the kernel read-only data: 10240k [ 6.411423] Freeing unused kernel memory: 1264K (ffff8800014c4000 - ffff880001600000) [ 6.420114] Freeing unused kernel memory: 1824K (ffff880001838000 - ffff880001a00000) [ 9.571744] systemd-udevd[903]: starting version 205 [ 10.442548] acpi-cpufreq: overriding BIOS provided _PSD data [ 10.629992] tg3.c:v3.132 (May 21, 2013) [ 10.816959] wmi: Mapper loaded [ 10.859289] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 10.925191] libphy: tg3 mdio bus: probed [ 10.930279] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 1c:75:08:00:a2:cc [ 10.930285] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01) [ 10.930289] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 10.930292] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 11.021316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.036859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 11.036864] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 11.037084] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 11.269669] acer_wmi: Acer Laptop ACPI-WMI Extras [ 11.269727] acer_wmi: Function bitmap for Communication Button: 0x1 [ 11.269737] acer_wmi: Brightness must be controlled by acpi video driver [ 11.272340] input: Acer WMI hotkeys as /devices/virtual/input/input7 [ 11.273073] input: Acer BMA150 accelerometer as /devices/virtual/input/input8 [ 11.289344] ohci-pci: OHCI PCI platform driver [ 11.289826] ohci-pci 0000:00:12.0: setting latency timer to 64 [ 11.289833] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 11.289848] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 11.289917] ohci-pci 0000:00:12.0: irq 18, io mem 0xf2206000 [ 11.345379] hub 3-0:1.0: USB hub found [ 11.345399] hub 3-0:1.0: 5 ports detected [ 11.346184] ohci-pci 0000:00:13.0: setting latency timer to 64 [ 11.346190] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 11.346205] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 11.346243] ohci-pci 0000:00:13.0: irq 18, io mem 0xf2205000 [ 11.401391] hub 4-0:1.0: USB hub found [ 11.401410] hub 4-0:1.0: 5 ports detected [ 11.402246] ohci-pci 0000:00:14.5: setting latency timer to 64 [ 11.402253] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 11.402267] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 11.402304] ohci-pci 0000:00:14.5: irq 18, io mem 0xf2204000 [ 11.461946] hub 5-0:1.0: USB hub found [ 11.461963] hub 5-0:1.0: 2 ports detected [ 11.534310] ath: phy0: ASPM enabled: 0x42 [ 11.534315] ath: EEPROM regdomain: 0x65 [ 11.534317] ath: EEPROM indicates we should expect a direct regpair map [ 11.534323] ath: Country alpha2 being used: 00 [ 11.534325] ath: Regpair used: 0x65 [ 11.536711] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.537233] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001920000, irq=17 [ 11.760063] usb 3-1: new low-speed USB device number 2 using ohci-pci [ 11.920951] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input9 [ 11.921242] hid-generic 0003:413C:3016.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:12.0-1/input0 [ 12.158109] snd_hda_intel 0000:00:14.2: setting latency timer to 64 [ 12.322422] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 12.962573] device fsid 43438ef5-adac-46a9-823e-14951ee6866a devid 1 transid 42109 /dev/sda1 [ 13.049243] device fsid c684c3ff-5bac-4ba8-8f63-c9036c2ad233 devid 1 transid 2633 /dev/sda3 [ 14.417893] RPC: Registered named UNIX socket transport module. [ 14.417899] RPC: Registered udp transport module. [ 14.417902] RPC: Registered tcp transport module. [ 14.417905] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.749727] btrfs: enabling inode map caching [ 14.749732] btrfs: disk space caching is enabled [ 15.095066] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k [ 15.164991] device fsid c684c3ff-5bac-4ba8-8f63-c9036c2ad233 devid 1 transid 2633 /dev/sda3 [ 15.168240] btrfs: enabling inode map caching [ 15.168244] btrfs: disk space caching is enabled [ 15.375237] device fsid 43438ef5-adac-46a9-823e-14951ee6866a devid 1 transid 42109 /dev/sda1 [ 15.408518] device fsid 43438ef5-adac-46a9-823e-14951ee6866a devid 1 transid 42109 /dev/sda1 [ 15.445501] device fsid 43438ef5-adac-46a9-823e-14951ee6866a devid 1 transid 42109 /dev/sda1 [ 15.483540] device fsid 43438ef5-adac-46a9-823e-14951ee6866a devid 1 transid 42109 /dev/sda1 [ 15.787728] fuse init (API version 7.22) [ 23.146926] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 23.167811] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.189995] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.962097] tg3 0000:02:00.0 eth0: Link is down [ 26.974860] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 26.974868] tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX [ 26.974887] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 46.488949] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 47.930144] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 47.930183] NFSD: starting 90-second grace period (net ffffffff81a6b1c0) [ 70.013778] ata1.00: configured for UDMA/133 [ 70.013785] ata1: EH complete [ 209.607691] ata1.00: configured for UDMA/133 [ 209.607730] ata1: EH complete [ 210.630179] PM: Syncing filesystems ... done. [ 210.983275] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 210.984907] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 210.986409] Suspending console(s) (use no_console_suspend to debug) [ 211.012066] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 211.012407] sd 0:0:0:0: [sda] Stopping disk [ 211.656307] [drm:rv770_stop_dpm] *ERROR* Could not force DPM to low. [ 211.664626] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000015e418 and cpu addr 0xffffc9000229d418 [ 211.854672] radeon 0000:01:00.0: power state changed by ACPI to D3cold [ 211.854749] PM: suspend of devices complete after 856.796 msecs [ 211.854918] PM: late suspend of devices complete after 0.166 msecs [ 211.865722] pcieport 0000:00:04.0: System wakeup enabled by ACPI [ 211.887619] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 211.898595] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 211.898693] PM: noirq suspend of devices complete after 43.758 msecs [ 211.898743] ACPI: Preparing to enter system sleep state S3 [ 211.902789] PM: Saving platform NVS memory [ 211.906877] Disabling non-boot CPUs ... [ 211.908290] smpboot: CPU 1 is now offline [ 211.908962] ACPI: Low-level resume complete [ 211.909002] PM: Restoring platform NVS memory [ 211.910646] PCI-DMA: Resuming GART IOMMU [ 211.910646] PCI-DMA: Restoring GART aperture settings [ 211.910948] Enabling non-boot CPUs ... [ 211.910987] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 211.922035] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu [ 211.922036] perf: IBS APIC setup failed on cpu #1 [ 211.924150] process: Switch to broadcast mode on CPU1 [ 211.924347] CPU1 is up [ 211.925371] ACPI: Waking up from system sleep state S3 [ 211.925866] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 211.936719] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 211.958873] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 212.002826] PM: noirq resume of devices complete after 77.136 msecs [ 212.002949] PM: early resume of devices complete after 0.097 msecs [ 212.003293] pcieport 0000:00:04.0: System wakeup disabled by ACPI [ 212.005643] tg3 0000:02:00.0 eth0: Link is down [ 212.006441] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 212.008896] ath: phy0: ASPM enabled: 0x42 [ 212.011123] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000). [ 212.011275] radeon 0000:01:00.0: WB enabled [ 212.011278] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88011a3c2c00 [ 212.011280] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88011a3c2c0c [ 212.012672] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000079b418 and cpu addr 0xffffc9000329c418 [ 212.015032] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 212.031257] [drm] ring test on 0 succeeded in 1 usecs [ 212.031315] [drm] ring test on 3 succeeded in 1 usecs [ 212.228659] [drm] ring test on 5 succeeded in 1 usecs [ 212.228661] [drm] UVD initialized successfully. [ 212.228698] [drm] ib test on ring 0 succeeded in 0 usecs [ 212.228728] [drm] ib test on ring 3 succeeded in 1 usecs [ 212.352817] usb 3-1: reset low-speed USB device number 2 using ohci-pci [ 212.401030] [drm] ib test on ring 5 succeeded [ 212.404855] switching from power state: [ 212.404857] ui class: none [ 212.404858] internal class: boot [ 212.404858] caps: video [ 212.404860] uvd vclk: 0 dclk: 0 [ 212.404862] power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 212.404863] power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 212.404864] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 212.404865] status: c b [ 212.404865] switching to power state: [ 212.404866] ui class: performance [ 212.404867] internal class: none [ 212.404867] caps: single_disp video [ 212.404868] uvd vclk: 0 dclk: 0 [ 212.404869] power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 [ 212.404870] power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 [ 212.404871] power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 [ 212.404872] status: r [ 212.475855] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 212.479163] ata2.00: configured for UDMA/100 [ 212.743940] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 214.414490] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 214.719472] ata1.00: configured for UDMA/133 [ 214.730612] sd 0:0:0:0: [sda] Starting disk [ 217.569397] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 217.569400] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CA86 (len 67, WS 0, PS 0) @ 0xCAB5 [ 218.614350] PM: resume of devices complete after 6609.267 msecs [ 218.614616] Restarting tasks ... done. [ 218.628254] video LNXVIDEO:01: Restoring backlight state [ 218.638541] pcieport 0000:00:04.0: System wakeup enabled by ACPI [ 219.216539] ata1.00: configured for UDMA/133 [ 219.216545] ata1: EH complete [ 219.425054] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 219.438052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 219.539628] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 219.563087] tg3 0000:02:00.0 eth0: Link is down [ 222.576051] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 222.576056] tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX [ 222.576070] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
https://bugs.freedesktop.org/show_bug.cgi?id=66767
--- Comment #3 from Martin Bednar serafean@gmail.com --- Created attachment 82844 --> https://bugs.freedesktop.org/attachment.cgi?id=82844&action=edit dmesg after resume
dmesg output after a resume from suspend to ram. UVD initialization fails. Output from 3.11-rc2. on a 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series]. Only happens if DPM is enabled.
short dmesg version (mainly radeon output after resume) : [ 134.652348] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000). [ 134.652517] radeon 0000:01:00.0: WB enabled [ 134.652520] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88011160fc00 [ 134.652521] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88011160fc0c [ 134.653452] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000639c418 [ 134.670153] [drm] ring test on 0 succeeded in 1 usecs [ 134.670213] [drm] ring test on 3 succeeded in 1 usecs [ 134.723748] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 134.723750] PM: Device 00:07 failed to resume: error -19 [ 134.962587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 134.965908] ata6: SATA link down (SStatus 0 SControl 300) [ 134.966739] ata2.00: configured for UDMA/100 [ 135.142469] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 135.142506] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it. [ 135.862145] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 136.771646] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 136.781372] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 136.791321] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 136.791499] ata1.00: configured for UDMA/133 [ 136.804977] sd 0:0:0:0: [sda] Starting disk [ 136.887420] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 137.912701] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 138.937981] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 139.963255] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 140.988548] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 142.013843] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 143.039117] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 144.064413] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 145.089696] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 145.109806] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 145.109873] [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1). [ 145.109874] [drm] Enabling audio support [ 145.109933] [drm] ib test on ring 0 succeeded in 0 usecs [ 145.109978] [drm] ib test on ring 3 succeeded in 1 usecs [ 145.121521] switching from power state: [ 145.121522] ui class: none [ 145.121524] internal class: boot [ 145.121525] caps: video [ 145.121527] uvd vclk: 0 dclk: 0 [ 145.121529] power level 0 sclk: 45000 mclk: 79000 vddc: 950 vddci: 0 [ 145.121530] power level 1 sclk: 45000 mclk: 79000 vddc: 950 vddci: 0 [ 145.121531] power level 2 sclk: 45000 mclk: 79000 vddc: 950 vddci: 0 [ 145.121533] status: c b [ 145.121533] switching to power state: [ 145.121534] ui class: performance [ 145.121535] internal class: none [ 145.121536] caps: single_disp video [ 145.121537] uvd vclk: 0 dclk: 0 [ 145.121538] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 0 [ 145.121539] power level 1 sclk: 30000 mclk: 79000 vddc: 950 vddci: 0 [ 145.121540] power level 2 sclk: 45000 mclk: 79000 vddc: 950 vddci: 0 [ 145.121541] status: r [ 150.307980] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 150.307982] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CBE6 (len 67, WS 0, PS 0) @ 0xCC15 [ 151.345217] PM: resume of devices complete after 16856.243 msecs
https://bugs.freedesktop.org/show_bug.cgi?id=66767
Alex Deucher agd5f@yahoo.com changed:
What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |DUPLICATE
--- Comment #4 from Alex Deucher agd5f@yahoo.com ---
*** This bug has been marked as a duplicate of bug 67043 ***
dri-devel@lists.freedesktop.org
-
bugzilla-daemon＠freedesktop.org