This patch-set enables HDMI in Arndale Octa board and fixes HPD DT property. It also includes code refactoring on ddc and phy.
v3: Add 'vdd-supply' property in dts. Use generic 'ddc' property instead of legacy property. Clean up DDC and PHY logic in _probe(). Remove duplicate code of regulator consumer initialization.
v2: Include DRM and Exynos maintainers and resend the patch-set. Add Rob's ack for the patch, [PATCH 2/4] ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
Milo Kim (5): ARM: dts: exynos: Enable HDMI for Arndale Octa board ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio' gpu: drm: exynos_hdmi: Move DDC logic into single function gpu: drm: exynos_hdmi: Move PHY logic into single function gpu: drm: exynos_hdmi: Remove duplicate initialization of regulator bulk consumer
.../bindings/display/exynos/exynos_hdmi.txt | 4 +- arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 +- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +- arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +- arch/arm/boot/dts/exynos5250-spring.dts | 2 +- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 +++ arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 +- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +- drivers/gpu/drm/exynos/exynos_hdmi.c | 112 +++++++++++---------- 13 files changed, 84 insertions(+), 65 deletions(-)
* GPIO for HDMI hot plug detect GPX3_7 is used. The HPD awareness is done when the GPIO is active high and single ended.
* Enable HDMI block in Exynos5420 HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator requires 1.8V LDO7 (PVDD_ANAIP_1V8).
* Support HDMI display data channel I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: Rob Herring robh+dt@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim woogyom.kim@gmail.com --- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 39a3b81..2fb5708 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -70,6 +70,19 @@ status = "disabled"; };
+&hdmi { + hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; + ddc = <&i2c_2>; + status = "okay"; +}; + +&i2c_2 { + status = "okay"; +}; + &hsi2c_4 { status = "okay";
On Wed, Aug 24, 2016 at 10:07:15PM +0900, Milo Kim wrote:
GPIO for HDMI hot plug detect GPX3_7 is used. The HPD awareness is done when the GPIO is active high and single ended.
Enable HDMI block in Exynos5420 HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator requires 1.8V LDO7 (PVDD_ANAIP_1V8).
Support HDMI display data channel I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: Rob Herring robh+dt@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim woogyom.kim@gmail.com
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 39a3b81..2fb5708 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -70,6 +70,19 @@ status = "disabled"; };
First of all - it looks like these DTS patches do not depend on DRM part, do they?
+&hdmi {
- hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>;
Are you sure it is open-source type?
- vdd_osc-supply = <&ldo7_reg>;
- vdd_pll-supply = <&ldo6_reg>;
- vdd-supply = <&ldo6_reg>;
- ddc = <&i2c_2>;
- status = "okay";
+};
+&i2c_2 {
- status = "okay";
Hm, what is connected here? Please put it in alphabetical order (so after hsi2c_4).
Best regards, Krzysztof
Hi Krzysztof,
On 08/25/2016 04:05 AM, Krzysztof Kozlowski wrote:
First of all - it looks like these DTS patches do not depend on DRM part, do they?
I just sent the v4 patch for DTS. DRM patch-set was sent separately. Thanks for your advise.
Best regards, Milo
This patch enables getting a HPD GPIO descriptor quickly. The exynos-hdmi driver uses "hpd" for HDMI hot plug detection.
static int hdmi_resources_init(struct hdmi_context *hdata) { ... hdata->hpd_gpio = devm_gpiod_get(dev, "hpd", GPIOD_IN); ... }
This calls 'of_find_gpio()' and it generates the GPIO consumer ID by referring GPIO suffix. So 'hpd-gpios' is preferred on getting a GPIO descriptor.
However, if the device tree uses 'hpd-gpio', then the exynos-hdmi driver always retries to get a GPIO descriptor because the first GPIO suffix is not 'gpio' but 'gpios'. So you always see the debug message below.
of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/soc/hdmi@14530000[0]'
Use the preferred property, 'hpd-gpios' instead of 'hpd-gpio'.
Acked-by: Rob Herring robh@kernel.org Reviewed-by: Andrzej Hajda a.hajda@samsung.com Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim woogyom.kim@gmail.com --- Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt | 4 ++-- arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 +- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +- arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +- arch/arm/boot/dts/exynos5250-spring.dts | 2 +- arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 +- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index a2ec4c1..6394ea9 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -9,7 +9,7 @@ Required properties: - reg: physical base address of the hdmi and length of memory mapped region. - interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. +- hpd-gpios: following information about the hotplug gpio pin. a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. @@ -56,7 +56,7 @@ Example: compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x100000>; interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 1>; + hpd-gpios = <&gpx3 7 1>; ddc = <&hdmi_ddc_node>; phy = <&hdmi_phy_node>; samsung,syscon-phandle = <&pmu_system_controller>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9a75e3e..cf95202 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -269,7 +269,7 @@ };
&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; hdmi-en-supply = <&hdmi_en>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 58ad48e7..be644fe 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -227,7 +227,7 @@ };
&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index ea70603..3d981f3 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -152,7 +152,7 @@ };
&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 381af13..7f27263 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,7 +116,7 @@ };
&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; };
&i2c_0 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index fadbea7..1055d25 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -260,7 +260,7 @@ };
&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; phy = <&hdmiphy>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 44f4292..1d52a79 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -91,7 +91,7 @@ };
&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; phy = <&hdmiphy>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index fe4e091..f6f256f 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -179,7 +179,7 @@
&hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index ed8f342..2954646 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -130,7 +130,7 @@
&hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index d562530..47c113c 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -250,7 +250,7 @@
&hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 5ec71e2..51a8bca 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -179,7 +179,7 @@
&hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>;
On Wed, Aug 24, 2016 at 10:07:16PM +0900, Milo Kim wrote:
This patch enables getting a HPD GPIO descriptor quickly. The exynos-hdmi driver uses "hpd" for HDMI hot plug detection.
static int hdmi_resources_init(struct hdmi_context *hdata) { ... hdata->hpd_gpio = devm_gpiod_get(dev, "hpd", GPIOD_IN); ... }
This calls 'of_find_gpio()' and it generates the GPIO consumer ID by referring GPIO suffix. So 'hpd-gpios' is preferred on getting a GPIO descriptor.
However, if the device tree uses 'hpd-gpio', then the exynos-hdmi driver always retries to get a GPIO descriptor because the first GPIO suffix is not 'gpio' but 'gpios'. So you always see the debug message below.
of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/soc/hdmi@14530000[0]'
Thanks for fixing this, applied!
BR, Krzysztof
Paring DT properties and getting the I2C adapter in one function.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: David Airlie airlied@linux.ie Cc: Inki Dae inki.dae@samsung.com Cc: Joonyoung Shim jy0922.shim@samsung.com Cc: Seung-Woo Kim sw0312.kim@samsung.com Cc: Kyungmin Park kyungmin.park@samsung.com Cc: Rob Herring robh+dt@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Milo Kim woogyom.kim@gmail.com --- drivers/gpu/drm/exynos/exynos_hdmi.c | 46 ++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 2275efe..8d99b5d 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1760,16 +1760,34 @@ static const struct component_ops hdmi_component_ops = { .unbind = hdmi_unbind, };
-static struct device_node *hdmi_legacy_ddc_dt_binding(struct device *dev) +static int hdmi_get_ddc_adapter(struct hdmi_context *hdata) { const char *compatible_str = "samsung,exynos4210-hdmiddc"; struct device_node *np; + struct i2c_adapter *adpt;
np = of_find_compatible_node(NULL, NULL, compatible_str); if (np) - return of_get_next_parent(np); + np = of_get_next_parent(np); + else + np = of_parse_phandle(hdata->dev->of_node, "ddc", 0); + + if (!np) { + DRM_ERROR("Failed to find ddc node in device tree\n"); + return -ENODEV; + }
- return NULL; + adpt = of_find_i2c_adapter_by_node(np); + if (!adpt) { + DRM_ERROR("Failed to get ddc i2c adapter by node\n"); + of_node_put(np); + return -EPROBE_DEFER; + } + + hdata->ddc_adpt = adpt; + of_node_put(np); + + return 0; }
static struct device_node *hdmi_legacy_phy_dt_binding(struct device *dev) @@ -1781,7 +1799,7 @@ static struct device_node *hdmi_legacy_phy_dt_binding(struct device *dev)
static int hdmi_probe(struct platform_device *pdev) { - struct device_node *ddc_node, *phy_node; + struct device_node *phy_node; struct device *dev = &pdev->dev; struct hdmi_context *hdata; struct resource *res; @@ -1811,23 +1829,9 @@ static int hdmi_probe(struct platform_device *pdev) return ret; }
- ddc_node = hdmi_legacy_ddc_dt_binding(dev); - if (ddc_node) - goto out_get_ddc_adpt; - - ddc_node = of_parse_phandle(dev->of_node, "ddc", 0); - if (!ddc_node) { - DRM_ERROR("Failed to find ddc node in device tree\n"); - return -ENODEV; - } - of_node_put(dev->of_node); - -out_get_ddc_adpt: - hdata->ddc_adpt = of_find_i2c_adapter_by_node(ddc_node); - if (!hdata->ddc_adpt) { - DRM_ERROR("Failed to get ddc i2c adapter by node\n"); - return -EPROBE_DEFER; - } + ret = hdmi_get_ddc_adapter(hdata); + if (ret) + return ret;
phy_node = hdmi_legacy_phy_dt_binding(dev); if (phy_node)
On 08/24/2016 03:07 PM, Milo Kim wrote:
Paring DT properties and getting the I2C adapter in one function.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: David Airlie airlied@linux.ie Cc: Inki Dae inki.dae@samsung.com Cc: Joonyoung Shim jy0922.shim@samsung.com Cc: Seung-Woo Kim sw0312.kim@samsung.com Cc: Kyungmin Park kyungmin.park@samsung.com Cc: Rob Herring robh+dt@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Milo Kim woogyom.kim@gmail.com
drivers/gpu/drm/exynos/exynos_hdmi.c | 46 ++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 2275efe..8d99b5d 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1760,16 +1760,34 @@ static const struct component_ops hdmi_component_ops = { .unbind = hdmi_unbind, };
-static struct device_node *hdmi_legacy_ddc_dt_binding(struct device *dev) +static int hdmi_get_ddc_adapter(struct hdmi_context *hdata) { const char *compatible_str = "samsung,exynos4210-hdmiddc"; struct device_node *np;
struct i2c_adapter *adpt;
np = of_find_compatible_node(NULL, NULL, compatible_str); if (np)
return of_get_next_parent(np);
np = of_get_next_parent(np);
- else
np = of_parse_phandle(hdata->dev->of_node, "ddc", 0);
- if (!np) {
DRM_ERROR("Failed to find ddc node in device tree\n");
return -ENODEV;
- }
- return NULL;
- adpt = of_find_i2c_adapter_by_node(np);
You can put of_node_put here, instead of duplicating it on both execution paths.
- if (!adpt) {
DRM_ERROR("Failed to get ddc i2c adapter by node\n");
In case of probe deferring DRM_INFO should be enough, or even DRM_DEBUG.
of_node_put(np);
return -EPROBE_DEFER;
- }
- hdata->ddc_adpt = adpt;
- of_node_put(np);
- return 0;
}
static struct device_node *hdmi_legacy_phy_dt_binding(struct device *dev) @@ -1781,7 +1799,7 @@ static struct device_node *hdmi_legacy_phy_dt_binding(struct device *dev)
static int hdmi_probe(struct platform_device *pdev) {
- struct device_node *ddc_node, *phy_node;
- struct device_node *phy_node; struct device *dev = &pdev->dev; struct hdmi_context *hdata; struct resource *res;
@@ -1811,23 +1829,9 @@ static int hdmi_probe(struct platform_device *pdev) return ret; }
- ddc_node = hdmi_legacy_ddc_dt_binding(dev);
- if (ddc_node)
goto out_get_ddc_adpt;
- ddc_node = of_parse_phandle(dev->of_node, "ddc", 0);
- if (!ddc_node) {
DRM_ERROR("Failed to find ddc node in device tree\n");
return -ENODEV;
- }
- of_node_put(dev->of_node);
-out_get_ddc_adpt:
- hdata->ddc_adpt = of_find_i2c_adapter_by_node(ddc_node);
- if (!hdata->ddc_adpt) {
DRM_ERROR("Failed to get ddc i2c adapter by node\n");
return -EPROBE_DEFER;
- }
ret = hdmi_get_ddc_adapter(hdata);
if (ret)
return ret;
phy_node = hdmi_legacy_phy_dt_binding(dev); if (phy_node)
Paring DT properties and getting PHY IO (memory mapped or I2C) in one function.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: David Airlie airlied@linux.ie Cc: Inki Dae inki.dae@samsung.com Cc: Joonyoung Shim jy0922.shim@samsung.com Cc: Seung-Woo Kim sw0312.kim@samsung.com Cc: Kyungmin Park kyungmin.park@samsung.com Cc: Rob Herring robh+dt@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Milo Kim woogyom.kim@gmail.com --- drivers/gpu/drm/exynos/exynos_hdmi.c | 63 +++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 8d99b5d..249cb23 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1790,16 +1790,44 @@ static int hdmi_get_ddc_adapter(struct hdmi_context *hdata) return 0; }
-static struct device_node *hdmi_legacy_phy_dt_binding(struct device *dev) +static int hdmi_get_phy_io(struct hdmi_context *hdata) { const char *compatible_str = "samsung,exynos4212-hdmiphy"; + struct device_node *np; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, compatible_str); + if (!np) { + np = of_parse_phandle(hdata->dev->of_node, "phy", 0); + if (!np) { + DRM_ERROR("Failed to find hdmiphy node in device tree\n"); + return -ENODEV; + } + } + + if (hdata->drv_data->is_apb_phy) { + hdata->regs_hdmiphy = of_iomap(np, 0); + if (!hdata->regs_hdmiphy) { + DRM_ERROR("failed to ioremap hdmi phy\n"); + ret = -ENOMEM; + goto out; + } + } else { + hdata->hdmiphy_port = of_find_i2c_device_by_node(np); + if (!hdata->hdmiphy_port) { + DRM_ERROR("Failed to get hdmi phy i2c client\n"); + ret = -EPROBE_DEFER; + goto out; + } + }
- return of_find_compatible_node(NULL, NULL, compatible_str); +out: + of_node_put(np); + return ret; }
static int hdmi_probe(struct platform_device *pdev) { - struct device_node *phy_node; struct device *dev = &pdev->dev; struct hdmi_context *hdata; struct resource *res; @@ -1833,34 +1861,9 @@ static int hdmi_probe(struct platform_device *pdev) if (ret) return ret;
- phy_node = hdmi_legacy_phy_dt_binding(dev); - if (phy_node) - goto out_get_phy_port; - - phy_node = of_parse_phandle(dev->of_node, "phy", 0); - if (!phy_node) { - DRM_ERROR("Failed to find hdmiphy node in device tree\n"); - ret = -ENODEV; + ret = hdmi_get_phy_io(hdata); + if (ret) goto err_ddc; - } - of_node_put(dev->of_node); - -out_get_phy_port: - if (hdata->drv_data->is_apb_phy) { - hdata->regs_hdmiphy = of_iomap(phy_node, 0); - if (!hdata->regs_hdmiphy) { - DRM_ERROR("failed to ioremap hdmi phy\n"); - ret = -ENOMEM; - goto err_ddc; - } - } else { - hdata->hdmiphy_port = of_find_i2c_device_by_node(phy_node); - if (!hdata->hdmiphy_port) { - DRM_ERROR("Failed to get hdmi phy i2c client\n"); - ret = -EPROBE_DEFER; - goto err_ddc; - } - }
INIT_DELAYED_WORK(&hdata->hotplug_work, hdmi_hotplug_work_func);
The helper, devm_regulator_bulk_get() initializes the consumer as NULL, so this code can be ignored.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: David Airlie airlied@linux.ie Cc: Inki Dae inki.dae@samsung.com Cc: Joonyoung Shim jy0922.shim@samsung.com Cc: Seung-Woo Kim sw0312.kim@samsung.com Cc: Kyungmin Park kyungmin.park@samsung.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Milo Kim woogyom.kim@gmail.com --- drivers/gpu/drm/exynos/exynos_hdmi.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 249cb23..4e17877f 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1669,10 +1669,9 @@ static int hdmi_resources_init(struct hdmi_context *hdata) if (ret) return ret;
- for (i = 0; i < ARRAY_SIZE(supply); ++i) { + for (i = 0; i < ARRAY_SIZE(supply); ++i) hdata->regul_bulk[i].supply = supply[i]; - hdata->regul_bulk[i].consumer = NULL; - } + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(supply), hdata->regul_bulk); if (ret) { if (ret != -EPROBE_DEFER)
On 08/24/2016 03:07 PM, Milo Kim wrote:
The helper, devm_regulator_bulk_get() initializes the consumer as NULL, so this code can be ignored.
Cc: Kukjin Kim kgene@kernel.org Cc: Krzysztof Kozlowski k.kozlowski@samsung.com Cc: David Airlie airlied@linux.ie Cc: Inki Dae inki.dae@samsung.com Cc: Joonyoung Shim jy0922.shim@samsung.com Cc: Seung-Woo Kim sw0312.kim@samsung.com Cc: Kyungmin Park kyungmin.park@samsung.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Milo Kim woogyom.kim@gmail.com
Reviewed-by: Andrzej Hajda a.hajda@samsung.com -- Regards Andrzej
drivers/gpu/drm/exynos/exynos_hdmi.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 249cb23..4e17877f 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1669,10 +1669,9 @@ static int hdmi_resources_init(struct hdmi_context *hdata) if (ret) return ret;
- for (i = 0; i < ARRAY_SIZE(supply); ++i) {
- for (i = 0; i < ARRAY_SIZE(supply); ++i) hdata->regul_bulk[i].supply = supply[i];
hdata->regul_bulk[i].consumer = NULL;
- }
- ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(supply), hdata->regul_bulk); if (ret) { if (ret != -EPROBE_DEFER)
dri-devel@lists.freedesktop.org