https://bugs.freedesktop.org/show_bug.cgi?id=87457

--- Comment #2 from Sebastian Parborg darkdefende@gmail.com --- Created attachment 111009 --> https://bugs.freedesktop.org/attachment.cgi?id=111009&action=edit 290x vbios

https://bugs.freedesktop.org/show_bug.cgi?id=87457

--- Comment #3 from John Brooks john@fastquake.com --- I have the same problem. Output from radeon_pm_info when the state is supposed to be set to high:

uvd disabled vce disabled power level avg sclk: 30000 mclk: 126000

Some relevant dmesg output:

[ 1.744912] [drm] radeon kernel modesetting enabled. [ 1.746987] checking generic (d0000000 e10000) vs hw (d0000000 10000000) [ 1.746990] fb: switching to radeondrmfb from VESA VGA [ 1.747009] Console: switching to colour dummy device 80x25 [ 1.747325] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1043:0x0470). [ 1.747337] [drm] register mmio base: 0xFBD80000 [ 1.747338] [drm] register mmio size: 262144 [ 1.747342] [drm] doorbell mmio base: 0xCF800000 [ 1.747343] [drm] doorbell mmio size: 8388608 [ 1.747365] radeon 0000:01:00.0: Invalid ROM contents [ 1.747977] ATOM BIOS: 67B1HB.15.41.0.2.AS04L [ 1.748038] radeon 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used) [ 1.748039] radeon 0000:01:00.0: GTT: 1024M 0x0000000100000000 - 0x000000013FFFFFFF [ 1.748041] [drm] Detected VRAM RAM=4096M, BAR=256M [ 1.748042] [drm] RAM width 512bits DDR [ 1.748115] [TTM] Zone kernel: Available graphics memory: 4087274 kiB [ 1.748116] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.748117] [TTM] Initializing pool allocator [ 1.748120] [TTM] Initializing DMA pool allocator [ 1.748136] [drm] radeon: 4096M of VRAM memory ready [ 1.748137] [drm] radeon: 1024M of GTT memory ready. [ 1.748147] [drm] Loading hawaii Microcode [ 1.748302] [drm] Internal thermal controller with fan control [ 1.748342] [drm] probing gen 2 caps for device 1022:960b = 1300c82/0 [ 1.763278] [drm:ci_dpm_init [radeon]] *ERROR* Invalid PCC GPIO: 13! [ 1.763282] == power state 0 == [ 1.763283] ui class: none [ 1.763284] internal class: boot [ 1.763285] caps: [ 1.763286] uvd vclk: 0 dclk: 0 [ 1.763287] power level 0 sclk: 30000 mclk: 15000 pcie gen: 2 pcie lanes: 8 [ 1.763288] status: c r b [ 1.763289] == power state 1 == [ 1.763290] ui class: performance [ 1.763290] internal class: none [ 1.763291] caps: [ 1.763292] uvd vclk: 0 dclk: 0 [ 1.763293] power level 0 sclk: 30000 mclk: 15000 pcie gen: 2 pcie lanes: 8 [ 1.763294] power level 1 sclk: 100000 mclk: 126000 pcie gen: 2 pcie lanes: 8 [ 1.763295] status: [ 1.771519] [drm] radeon: dpm initialized

https://bugs.freedesktop.org/show_bug.cgi?id=87457

Alex Deucher alexdeucher@gmail.com changed:

What |Removed |Added ---------------------------------------------------------------------------- Component|Drivers/Gallium/radeonsi |DRM/Radeon Version|git |unspecified Product|Mesa |DRI

https://bugs.freedesktop.org/show_bug.cgi?id=87457

--- Comment #6 from Sebastian Parborg darkdefende@gmail.com --- Seems to have fixed the issue for me. However, I only did some quick tests, so perhaps leave this bug open for a few more days so I can test if there are still some corner cases where it breaks.

Thank you so muck Alex! :)

https://bugs.freedesktop.org/show_bug.cgi?id=87457

Sebastian Parborg darkdefende@gmail.com changed:

What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED

--- Comment #8 from Sebastian Parborg darkdefende@gmail.com --- I've been using it for a few days now. It seems like the reclocking issue is completely fixed for me.

I'll close this bug as it seems to work flawlessly for Brooks too.

Thanks again Alex.