On Mon, Jun 01, 2020 at 02:09:35PM +0800, Liu Ying wrote:

This patch set adds a KOE WUXGA 10.1" LVDS panel support. The panel type is TX26D202VM0BWA. The panel has dual LVDS channels.

My panel is manufactured by US Micro Products(USMP). There is a tag at the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' and it's made by KOE in Taiwan.

The panel spec from USMP can be found at: https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192...

The below panel spec from KOE is basically the same to the one from USMP. However, the panel type 'TX26D202VM0BAA' is a little bit different. It looks that the two types of panel are compatible with each other. http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf

Patch 1/2 adds compatible for the panel in the panel-simple DT binding doc. Patch 2/2 adds the panel support in the DRM panel-simple driver.

Thanks, both patches applied to drm-misc-next.

Sam

Liu Ying (2): dt-bindings: panel-simple: Add koe,tx26d202vm0bwa compatible drm/panel: simple: Add support for KOE TX26D202VM0BWA panel

.../bindings/display/panel/panel-simple.yaml | 2 ++ drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++ 2 files changed, 36 insertions(+)

-- 2.7.4