Move to use the new drm panel support in tilcdc together with added "tfc,s9700rtwv43tr-01b"-panel support in drm panel-simple.
Signed-off-by: Jyri Sarha jsarha@ti.com Reviewed-by: Tomi Valkeinen tomi.valkeinen@ti.com --- "tfc,s9700rtwv43tr-01b" in panel-simple has been in for some time now so it is about time to get this in too.
arch/arm/boot/dts/am335x-evm.dts | 44 +++++++++++++------------------- 1 file changed, 18 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a00145705c9b..0e286a1c9cc5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -113,7 +113,7 @@ }; };
- backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -121,35 +121,19 @@ };
panel { - compatible = "ti,tilcdc,panel"; + compatible = "tfc,s9700rtwv43tr-01b"; + status = "okay"; + pinctrl-names = "default"; pinctrl-0 = <&lcd_pins_s0>; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - };
- display-timings { - 800x480p62 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <39>; - hback-porch = <39>; - hsync-len = <47>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <2>; - hsync-active = <1>; - vsync-active = <1>; + backlight = <&backlight>; + ports { + port { + panel_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; }; }; }; @@ -525,6 +509,14 @@ status = "okay";
blue-and-red-wiring = "crossed"; + + ports { + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&panel_0>; + }; + }; + }; };
&elm {
Hi Jyri,
Thank you for the patch.
On Mon, Dec 02, 2019 at 08:57:29PM +0200, Jyri Sarha wrote:
Move to use the new drm panel support in tilcdc together with added "tfc,s9700rtwv43tr-01b"-panel support in drm panel-simple.
Signed-off-by: Jyri Sarha jsarha@ti.com Reviewed-by: Tomi Valkeinen tomi.valkeinen@ti.com
"tfc,s9700rtwv43tr-01b" in panel-simple has been in for some time now so it is about time to get this in too.
arch/arm/boot/dts/am335x-evm.dts | 44 +++++++++++++------------------- 1 file changed, 18 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a00145705c9b..0e286a1c9cc5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -113,7 +113,7 @@ }; };
- backlight {
- backlight: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -121,35 +121,19 @@ };
panel {
compatible = "ti,tilcdc,panel";
compatible = "tfc,s9700rtwv43tr-01b";
- status = "okay";
I think this can be dropped as it's implicit.
- pinctrl-names = "default"; pinctrl-0 = <&lcd_pins_s0>;
panel-info {
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <32>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings {
800x480p62 {
clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <39>;
hback-porch = <39>;
hsync-len = <47>;
vback-porch = <29>;
vfront-porch = <13>;
vsync-len = <2>;
hsync-active = <1>;
vsync-active = <1>;
backlight = <&backlight>;
I would add a blank line here.
ports {
port {
panel_0: endpoint@0 {
remote-endpoint = <&lcdc_0>;
};}; };
The outter ports node isn't required if there's a single port, up to you.
}; @@ -525,6 +509,14 @@ status = "okay";
blue-and-red-wiring = "crossed";
- ports {
port {
lcdc_0: endpoint@0 {
remote-endpoint = <&panel_0>;
};
};
- };
Same here.
With the above issues addressed as applicable,
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com
};
&elm {
dri-devel@lists.freedesktop.org