The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple.
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org --- drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ba3f85f36c2f..d7ae0ede2b6e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1806,6 +1806,34 @@ static const struct panel_desc innolux_zj070na_01p = { }, };
+static const struct drm_display_mode ivo_m133nwf4_r0_mode = { + .clock = 138778, + .hdisplay = 1920, + .hsync_start = 1920 + 24, + .hsync_end = 1920 + 24 + 48, + .htotal = 1920 + 24 + 48 + 88, + .vdisplay = 1080, + .vsync_start = 1080 + 3, + .vsync_end = 1080 + 3 + 12, + .vtotal = 1080 + 3 + 12 + 17, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, +}; + +static const struct panel_desc ivo_m133nwf4_r0 = { + .modes = &ivo_m133nwf4_r0_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 294, + .height = 165, + }, + .delay = { + .hpd_absent_delay = 200, + .unprepare = 500, + }, +}; + static const struct display_timing koe_tx14d24vm1bpa_timing = { .pixelclock = { 5580000, 5850000, 6200000 }, .hactive = { 320, 320, 320 }, @@ -3266,6 +3294,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "innolux,zj070na-01p", .data = &innolux_zj070na_01p, + }, { + .compatible = "ivo,m133nwf4-r0", + .data = &ivo_m133nwf4_r0, }, { .compatible = "koe,tx14d24vm1bpa", .data = &koe_tx14d24vm1bpa,
Hi Bjorn.
On Sat, Dec 28, 2019 at 10:06:58PM -0800, Bjorn Andersson wrote:
The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple.
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ba3f85f36c2f..d7ae0ede2b6e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1806,6 +1806,34 @@ static const struct panel_desc innolux_zj070na_01p = { }, };
+static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
- .clock = 138778,
- .hdisplay = 1920,
- .hsync_start = 1920 + 24,
- .hsync_end = 1920 + 24 + 48,
- .htotal = 1920 + 24 + 48 + 88,
- .vdisplay = 1080,
- .vsync_start = 1080 + 3,
- .vsync_end = 1080 + 3 + 12,
- .vtotal = 1080 + 3 + 12 + 17,
- .vrefresh = 60,
- .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+static const struct panel_desc ivo_m133nwf4_r0 = {
- .modes = &ivo_m133nwf4_r0_mode,
- .num_modes = 1,
- .bpc = 8,
- .size = {
.width = 294,
.height = 165,
- },
- .delay = {
.hpd_absent_delay = 200,
.unprepare = 500,
- },
+};
For new bindings - at least add connector_type. And consider bus_format and bus_flags too.
static const struct display_timing koe_tx14d24vm1bpa_timing = { .pixelclock = { 5580000, 5850000, 6200000 }, .hactive = { 320, 320, 320 }, @@ -3266,6 +3294,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "innolux,zj070na-01p", .data = &innolux_zj070na_01p,
- }, {
.compatible = "ivo,m133nwf4-r0",
Compatible must be documented in a binding file. We are discussing a new binding format where it is simple to add a new panel. But no final conclusion yet.
The comments above (in panel_desc and here) also apply for the other patch you sent.
Sam
On Thu 02 Jan 00:55 PST 2020, Sam Ravnborg wrote:
Hi Bjorn.
On Sat, Dec 28, 2019 at 10:06:58PM -0800, Bjorn Andersson wrote:
The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple.
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ba3f85f36c2f..d7ae0ede2b6e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1806,6 +1806,34 @@ static const struct panel_desc innolux_zj070na_01p = { }, };
+static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
- .clock = 138778,
- .hdisplay = 1920,
- .hsync_start = 1920 + 24,
- .hsync_end = 1920 + 24 + 48,
- .htotal = 1920 + 24 + 48 + 88,
- .vdisplay = 1080,
- .vsync_start = 1080 + 3,
- .vsync_end = 1080 + 3 + 12,
- .vtotal = 1080 + 3 + 12 + 17,
- .vrefresh = 60,
- .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+static const struct panel_desc ivo_m133nwf4_r0 = {
- .modes = &ivo_m133nwf4_r0_mode,
- .num_modes = 1,
- .bpc = 8,
- .size = {
.width = 294,
.height = 165,
- },
- .delay = {
.hpd_absent_delay = 200,
.unprepare = 500,
- },
+};
For new bindings - at least add connector_type. And consider bus_format and bus_flags too.
Sure thing, will update the two patches.
static const struct display_timing koe_tx14d24vm1bpa_timing = { .pixelclock = { 5580000, 5850000, 6200000 }, .hactive = { 320, 320, 320 }, @@ -3266,6 +3294,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "innolux,zj070na-01p", .data = &innolux_zj070na_01p,
- }, {
.compatible = "ivo,m133nwf4-r0",
Compatible must be documented in a binding file. We are discussing a new binding format where it is simple to add a new panel. But no final conclusion yet.
Okay, will spin some DT bindings for these as well.
Thanks, Bjorn
The comments above (in panel_desc and here) also apply for the other patch you sent.
Sam
dri-devel@lists.freedesktop.org