This replaces the custom connector in the PL111 with the panel bridge helper.

This works nicely for all standard panels, but since there are several PL11x-based systems that will need to use the dumb VGA connector bridge we use drm_of_find_panel_or_bridge() and make some headroom for dealing with bridges that are not panels as well, and drop a TODO in the code.

Signed-off-by: Linus Walleij linus.walleij@linaro.org --- ChangeLog v2->v3: - Rebase on DRM-TIP - Use drm_simple_display_pipe_attach_bridge() as suggested by Daniel Vetter. ChangeLog v1->v2: - Remove the panel [un]prepare() and [en|dis]able() calls from the display driver, since this is now handled by the bridge. --- drivers/gpu/drm/pl111/Kconfig | 3 +- drivers/gpu/drm/pl111/Makefile | 3 +- drivers/gpu/drm/pl111/pl111_connector.c | 126 -------------------------------- drivers/gpu/drm/pl111/pl111_display.c | 18 ++--- drivers/gpu/drm/pl111/pl111_drm.h | 17 ++--- drivers/gpu/drm/pl111/pl111_drv.c | 52 ++++++++----- 6 files changed, 52 insertions(+), 167 deletions(-) delete mode 100644 drivers/gpu/drm/pl111/pl111_connector.c

diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig index bbfba87cd1a8..e5e2abd66491 100644 --- a/drivers/gpu/drm/pl111/Kconfig +++ b/drivers/gpu/drm/pl111/Kconfig @@ -6,7 +6,8 @@ config DRM_PL111 select DRM_KMS_HELPER select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER - select DRM_PANEL + select DRM_BRIDGE + select DRM_PANEL_BRIDGE select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE help Choose this option for DRM support for the PL111 CLCD controller. diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile index 59483d610ef5..c5f8f9684848 100644 --- a/drivers/gpu/drm/pl111/Makefile +++ b/drivers/gpu/drm/pl111/Makefile @@ -1,5 +1,4 @@ -pl111_drm-y += pl111_connector.o \ - pl111_display.o \ +pl111_drm-y += pl111_display.o \ pl111_drv.o

pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o diff --git a/drivers/gpu/drm/pl111/pl111_connector.c b/drivers/gpu/drm/pl111/pl111_connector.c deleted file mode 100644 index d335f9a29ce4..000000000000 --- a/drivers/gpu/drm/pl111/pl111_connector.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. - * - * Parts of this file were based on sources as follows: - * - * Copyright (c) 2006-2008 Intel Corporation - * Copyright (c) 2007 Dave Airlie airlied@linux.ie - * Copyright (C) 2011 Texas Instruments - * - * This program is free software and is provided to you under the terms of the - * GNU General Public License version 2 as published by the Free Software - * Foundation, and any use by you of this program is subject to the terms of - * such GNU licence. - * - */ - -/** - * pl111_drm_connector.c - * Implementation of the connector functions for PL111 DRM - */ -#include <linux/amba/clcd-regs.h> -#include <linux/version.h> -#include <linux/shmem_fs.h> -#include <linux/dma-buf.h> - -#include <drm/drmP.h> -#include <drm/drm_atomic_helper.h> -#include <drm/drm_crtc_helper.h> -#include <drm/drm_of.h> -#include <drm/drm_panel.h> - -#include "pl111_drm.h" - -static void pl111_connector_destroy(struct drm_connector *connector) -{ - struct pl111_drm_connector *pl111_connector = - to_pl111_connector(connector); - - if (pl111_connector->panel) - drm_panel_detach(pl111_connector->panel); - - drm_connector_unregister(connector); - drm_connector_cleanup(connector); -} - -static enum drm_connector_status pl111_connector_detect(struct drm_connector - *connector, bool force) -{ - struct pl111_drm_connector *pl111_connector = - to_pl111_connector(connector); - - return (pl111_connector->panel ? - connector_status_connected : - connector_status_disconnected); -} - -static int pl111_connector_helper_get_modes(struct drm_connector *connector) -{ - struct pl111_drm_connector *pl111_connector = - to_pl111_connector(connector); - - if (!pl111_connector->panel) - return 0; - - return drm_panel_get_modes(pl111_connector->panel); -} - -const struct drm_connector_funcs connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = pl111_connector_destroy, - .detect = pl111_connector_detect, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -const struct drm_connector_helper_funcs connector_helper_funcs = { - .get_modes = pl111_connector_helper_get_modes, -}; - -/* Walks the OF graph to find the panel node and then asks DRM to look - * up the panel. - */ -static struct drm_panel *pl111_get_panel(struct device *dev) -{ - struct device_node *endpoint, *panel_node; - struct device_node *np = dev->of_node; - struct drm_panel *panel; - - endpoint = of_graph_get_next_endpoint(np, NULL); - if (!endpoint) { - dev_err(dev, "no endpoint to fetch panel\n"); - return NULL; - } - - /* don't proceed if we have an endpoint but no panel_node tied to it */ - panel_node = of_graph_get_remote_port_parent(endpoint); - of_node_put(endpoint); - if (!panel_node) { - dev_err(dev, "no valid panel node\n"); - return NULL; - } - - panel = of_drm_find_panel(panel_node); - of_node_put(panel_node); - - return panel; -} - -int pl111_connector_init(struct drm_device *dev) -{ - struct pl111_drm_dev_private *priv = dev->dev_private; - struct pl111_drm_connector *pl111_connector = &priv->connector; - struct drm_connector *connector = &pl111_connector->connector; - - drm_connector_init(dev, connector, &connector_funcs, - DRM_MODE_CONNECTOR_DPI); - drm_connector_helper_add(connector, &connector_helper_funcs); - - pl111_connector->panel = pl111_get_panel(dev->dev); - if (pl111_connector->panel) - drm_panel_attach(pl111_connector->panel, connector); - - return 0; -} - diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c index b58c988d9da0..e4c692230548 100644 --- a/drivers/gpu/drm/pl111/pl111_display.c +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -21,7 +21,6 @@ #include <linux/of_graph.h>

#include <drm/drmP.h> -#include <drm/drm_panel.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_fb_cma_helper.h> @@ -94,7 +93,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, struct pl111_drm_dev_private *priv = drm->dev_private; const struct drm_display_mode *mode = &cstate->mode; struct drm_framebuffer *fb = plane->state->fb; - struct drm_connector *connector = &priv->connector.connector; + struct drm_connector *connector = priv->connector; u32 cntl; u32 ppl, hsw, hfp, hbp; u32 lpp, vsw, vfp, vbp; @@ -156,8 +155,6 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,

writel(0, priv->regs + CLCD_TIM3);

- drm_panel_prepare(priv->connector.panel); - /* Enable and Power Up */ cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1);

@@ -204,8 +201,6 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,

writel(cntl, priv->regs + CLCD_PL111_CNTL);

- drm_panel_enable(priv->connector.panel); - drm_crtc_vblank_on(crtc); }

@@ -217,13 +212,9 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe)

drm_crtc_vblank_off(crtc);

- drm_panel_disable(priv->connector.panel); - /* Disable and Power Down */ writel(0, priv->regs + CLCD_PL111_CNTL);

- drm_panel_unprepare(priv->connector.panel); - clk_disable_unprepare(priv->clk); }

@@ -458,7 +449,12 @@ int pl111_display_init(struct drm_device *drm) ret = drm_simple_display_pipe_init(drm, &priv->pipe, &pl111_display_funcs, formats, ARRAY_SIZE(formats), - NULL, &priv->connector.connector); + NULL, priv->connector); + if (ret) + return ret; + + ret = drm_simple_display_pipe_attach_bridge(&priv->pipe, + priv->bridge); if (ret) return ret;

diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h index a97f303f6833..000534d85b43 100644 --- a/drivers/gpu/drm/pl111/pl111_drm.h +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -21,21 +21,22 @@

#include <drm/drm_gem.h> #include <drm/drm_simple_kms_helper.h> +#include <drm/drm_connector.h> +#include <drm/drm_encoder.h> +#include <drm/drm_panel.h> +#include <drm/drm_bridge.h> #include <linux/clk-provider.h>

#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)

struct drm_minor;

-struct pl111_drm_connector { - struct drm_connector connector; - struct drm_panel *panel; -}; - struct pl111_drm_dev_private { struct drm_device *drm;

- struct pl111_drm_connector connector; + struct drm_connector *connector; + struct drm_panel *panel; + struct drm_bridge *bridge; struct drm_simple_display_pipe pipe; struct drm_fbdev_cma *fbdev;

@@ -50,14 +51,10 @@ struct pl111_drm_dev_private { spinlock_t tim2_lock; };

-#define to_pl111_connector(x) \ - container_of(x, struct pl111_drm_connector, connector) - int pl111_display_init(struct drm_device *dev); int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc); void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc); irqreturn_t pl111_irq(int irq, void *data); -int pl111_connector_init(struct drm_device *dev); int pl111_debugfs_init(struct drm_minor *minor);

#endif /* _PL111_DRM_H_ */ diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index 581c452cede1..bddf24327910 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -68,6 +68,9 @@ #include <drm/drm_gem_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_fb_cma_helper.h> +#include <drm/drm_of.h> +#include <drm/drm_bridge.h> +#include <drm/drm_panel.h>

#include "pl111_drm.h"

@@ -83,6 +86,8 @@ static int pl111_modeset_init(struct drm_device *dev) { struct drm_mode_config *mode_config; struct pl111_drm_dev_private *priv = dev->dev_private; + struct drm_panel *panel; + struct drm_bridge *bridge; int ret = 0;

drm_mode_config_init(dev); @@ -93,34 +98,38 @@ static int pl111_modeset_init(struct drm_device *dev) mode_config->min_height = 1; mode_config->max_height = 768;

- ret = pl111_connector_init(dev); - if (ret) { - dev_err(dev->dev, "Failed to create pl111_drm_connector\n"); - goto out_config; + ret = drm_of_find_panel_or_bridge(dev->dev->of_node, + 0, 0, &panel, &bridge); + if (ret && ret != -ENODEV) + return ret; + if (panel) { + bridge = drm_panel_bridge_add(panel, + DRM_MODE_CONNECTOR_Unknown); + if (IS_ERR(bridge)) { + ret = PTR_ERR(bridge); + goto out_config; + } + /* + * TODO: when we are using a different bridge than a panel + * (such as a dumb VGA connector) we need to devise a different + * method to get the connector out of the bridge. + */ + priv->panel = panel; + priv->connector = panel->connector; }

- /* Don't actually attach if we didn't find a drm_panel - * attached to us. This will allow a kernel to include both - * the fbdev pl111 driver and this one, and choose between - * them based on which subsystem has support for the panel. - */ - if (!priv->connector.panel) { - dev_info(dev->dev, - "Disabling due to lack of DRM panel device.\n"); - ret = -ENODEV; - goto out_config; - } + priv->bridge = bridge;

ret = pl111_display_init(dev); if (ret != 0) { dev_err(dev->dev, "Failed to init display\n"); - goto out_config; + goto out_bridge; }

ret = drm_vblank_init(dev, 1); if (ret != 0) { dev_err(dev->dev, "Failed to init vblank\n"); - goto out_config; + goto out_bridge; }

drm_mode_config_reset(dev); @@ -132,6 +141,11 @@ static int pl111_modeset_init(struct drm_device *dev)

goto finish;

+out_bridge: + if (panel) + drm_panel_bridge_remove(bridge); + else + drm_bridge_remove(bridge); out_config: drm_mode_config_cleanup(dev); finish: @@ -236,6 +250,10 @@ static int pl111_amba_remove(struct amba_device *amba_dev) drm_dev_unregister(drm); if (priv->fbdev) drm_fbdev_cma_fini(priv->fbdev); + if (priv->panel) + drm_panel_bridge_remove(priv->bridge); + else + drm_bridge_remove(priv->bridge); drm_mode_config_cleanup(drm); drm_dev_unref(drm);

We detect and enable the use of the PL110 variant, an earlier incarnation of PL111. The only real difference is that the control and interrupt enable registers have swapped place. The Versatile AB and Versatile PB have a variant inbetween PL110 and PL111, it is PL110 but they have already swapped the two registers so those two need a bit of special handling.

Reviewed-by: Eric Anholt eric@anholt.net Signed-off-by: Linus Walleij linus.walleij@linaro.org --- ChangeLog v2->v3: - Rebase on DRM-TIP ChangeLog v1->v2: - Fix static const on the variant struct holders. (Had to insert a (void*) cast for this because amba_id is not consting this field) - Collect Eric A's Reviewed-by --- drivers/gpu/drm/pl111/pl111_display.c | 30 ++++-------- drivers/gpu/drm/pl111/pl111_drm.h | 17 +++++++ drivers/gpu/drm/pl111/pl111_drv.c | 86 +++++++++++++++++++++++++++++++++-- 3 files changed, 108 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c index e4c692230548..b104011cea55 100644 --- a/drivers/gpu/drm/pl111/pl111_display.c +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -199,7 +199,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, break; }

- writel(cntl, priv->regs + CLCD_PL111_CNTL); + writel(cntl, priv->regs + priv->ctrl);

drm_crtc_vblank_on(crtc); } @@ -213,7 +213,7 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe) drm_crtc_vblank_off(crtc);

/* Disable and Power Down */ - writel(0, priv->regs + CLCD_PL111_CNTL); + writel(0, priv->regs + priv->ctrl);

clk_disable_unprepare(priv->clk); } @@ -251,7 +251,7 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) { struct pl111_drm_dev_private *priv = drm->dev_private;

- writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); + writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb);

return 0; } @@ -260,7 +260,7 @@ void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) { struct pl111_drm_dev_private *priv = drm->dev_private;

- writel(0, priv->regs + CLCD_PL111_IENB); + writel(0, priv->regs + priv->ienb); }

static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, @@ -404,22 +404,6 @@ int pl111_display_init(struct drm_device *drm) struct device_node *endpoint; u32 tft_r0b0g0[3]; int ret; - static const u32 formats[] = { - DRM_FORMAT_ABGR8888, - DRM_FORMAT_XBGR8888, - DRM_FORMAT_ARGB8888, - DRM_FORMAT_XRGB8888, - DRM_FORMAT_BGR565, - DRM_FORMAT_RGB565, - DRM_FORMAT_ABGR1555, - DRM_FORMAT_XBGR1555, - DRM_FORMAT_ARGB1555, - DRM_FORMAT_XRGB1555, - DRM_FORMAT_ABGR4444, - DRM_FORMAT_XBGR4444, - DRM_FORMAT_ARGB4444, - DRM_FORMAT_XRGB4444, - };

endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); if (!endpoint) @@ -448,8 +432,10 @@ int pl111_display_init(struct drm_device *drm)

ret = drm_simple_display_pipe_init(drm, &priv->pipe, &pl111_display_funcs, - formats, ARRAY_SIZE(formats), - NULL, priv->connector); + priv->variant->formats, + priv->variant->nformats, + NULL, + priv->connector); if (ret) return ret;

diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h index 000534d85b43..b380a7b4fb58 100644 --- a/drivers/gpu/drm/pl111/pl111_drm.h +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -31,6 +31,20 @@

struct drm_minor;

+/** + * struct pl111_variant_data - encodes IP differences + * @name: the name of this variant + * @is_pl110: this is the early PL110 variant + * @formats: array of supported pixel formats on this variant + * @nformats: the length of the array of supported pixel formats + */ +struct pl111_variant_data { + const char *name; + bool is_pl110; + const u32 *formats; + unsigned int nformats; +}; + struct pl111_drm_dev_private { struct drm_device *drm;

@@ -41,6 +55,8 @@ struct pl111_drm_dev_private { struct drm_fbdev_cma *fbdev;

void *regs; + u32 ienb; + u32 ctrl; /* The pixel clock (a reference to our clock divider off of CLCDCLK). */ struct clk *clk; /* pl111's internal clock divider. */ @@ -49,6 +65,7 @@ struct pl111_drm_dev_private { * subsystem and pl111_display_enable(). */ spinlock_t tim2_lock; + const struct pl111_variant_data *variant; };

int pl111_display_init(struct drm_device *dev); diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index bddf24327910..903e948afea1 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -197,6 +197,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev, { struct device *dev = &amba_dev->dev; struct pl111_drm_dev_private *priv; + struct pl111_variant_data *variant = id->data; struct drm_device *drm; int ret;

@@ -210,6 +211,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev, amba_set_drvdata(amba_dev, drm); priv->drm = drm; drm->dev_private = priv; + priv->variant = variant; + + /* + * The PL110 and PL111 variants have two registers + * swapped: interrupt enable and control. For this reason + * we use offsets that we can change per variant. + */ + if (variant->is_pl110) { + /* + * The ARM Versatile boards are even more special: + * their PrimeCell ID say they are PL110 but the + * control and interrupt enable registers are anyway + * swapped to the PL111 order so they are not following + * the PL110 datasheet. + */ + if (of_machine_is_compatible("arm,versatile-ab") || + of_machine_is_compatible("arm,versatile-pb")) { + priv->ienb = CLCD_PL111_IENB; + priv->ctrl = CLCD_PL111_CNTL; + } else { + priv->ienb = CLCD_PL110_IENB; + priv->ctrl = CLCD_PL110_CNTL; + } + } else { + priv->ienb = CLCD_PL111_IENB; + priv->ctrl = CLCD_PL111_CNTL; + }

priv->regs = devm_ioremap_resource(dev, &amba_dev->res); if (IS_ERR(priv->regs)) { @@ -218,10 +246,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev, }

/* turn off interrupts before requesting the irq */ - writel(0, priv->regs + CLCD_PL111_IENB); + writel(0, priv->regs + priv->ienb);

ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, - "pl111", priv); + variant->name, priv); if (ret != 0) { dev_err(dev, "%s failed irq %d\n", __func__, ret); return ret; @@ -260,10 +288,62 @@ static int pl111_amba_remove(struct amba_device *amba_dev) return 0; }

-static struct amba_id pl111_id_table[] = { +/* + * This variant exist in early versions like the ARM Integrator + * and this version lacks the 565 and 444 pixel formats. + */ +static const u32 pl110_pixel_formats[] = { + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_ABGR1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_XRGB1555, +}; + +static const struct pl111_variant_data pl110_variant = { + .name = "PL110", + .is_pl110 = true, + .formats = pl110_pixel_formats, + .nformats = ARRAY_SIZE(pl110_pixel_formats), +}; + +/* RealView, Versatile Express etc use this modern variant */ +static const u32 pl111_pixel_formats[] = { + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_BGR565, + DRM_FORMAT_RGB565, + DRM_FORMAT_ABGR1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_XRGB1555, + DRM_FORMAT_ABGR4444, + DRM_FORMAT_XBGR4444, + DRM_FORMAT_ARGB4444, + DRM_FORMAT_XRGB4444, +}; + +static const struct pl111_variant_data pl111_variant = { + .name = "PL111", + .formats = pl111_pixel_formats, + .nformats = ARRAY_SIZE(pl111_pixel_formats), +}; + +static const struct amba_id pl111_id_table[] = { + { + .id = 0x00041110, + .mask = 0x000fffff, + .data = (void*)&pl110_variant, + }, { .id = 0x00041111, .mask = 0x000fffff, + .data = (void*)&pl111_variant, }, {0, 0}, };

The silcon and components around the PL111 may require some variants to perform special set-up of the display. Add two callbacks to manage this.

Reviewed-by: Eric Anholt eric@anholt.net Signed-off-by: Linus Walleij linus.walleij@linaro.org --- ChangeLog v2->v3: - Rebase on DRM-TIP ChangeLog v1->v2: - Rebase on other display driver changes. --- drivers/gpu/drm/pl111/pl111_display.c | 6 ++++++ drivers/gpu/drm/pl111/pl111_drm.h | 3 +++ 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c index b7df9f5df881..68847a074331 100644 --- a/drivers/gpu/drm/pl111/pl111_display.c +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -208,6 +208,9 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, */ msleep(20);

+ if (priv->variant_display_enable) + priv->variant_display_enable(drm, fb->format->format); + /* Power Up */ cntl |= CNTL_LCDPWR; writel(cntl, priv->regs + priv->ctrl); @@ -237,6 +240,9 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe) */ msleep(20);

+ if (priv->variant_display_disable) + priv->variant_display_disable(drm); + /* Disable */ writel(0, priv->regs + priv->ctrl);

diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h index b380a7b4fb58..440f53ebee8c 100644 --- a/drivers/gpu/drm/pl111/pl111_drm.h +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -26,6 +26,7 @@ #include <drm/drm_panel.h> #include <drm/drm_bridge.h> #include <linux/clk-provider.h> +#include <linux/interrupt.h>

#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)

@@ -66,6 +67,8 @@ struct pl111_drm_dev_private { */ spinlock_t tim2_lock; const struct pl111_variant_data *variant; + void (*variant_display_enable) (struct drm_device *drm, u32 format); + void (*variant_display_disable) (struct drm_device *drm); };

int pl111_display_init(struct drm_device *dev);