This patch adds support for Kaohsiung Opto-Electronics Inc. 10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface. The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' and it's made by KOE in Taiwan.
The panel spec from USMP can be found at: https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192...
The below panel spec from KOE is basically the same to the one from USMP. However, the panel type 'TX26D202VM0BAA' is a little bit different. It looks that the two types of panel are compatible with each other. http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Signed-off-by: Liu Ying victor.liu@nxp.com --- drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index b6ecd15..7c222ec 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2200,6 +2200,37 @@ static const struct panel_desc koe_tx14d24vm1bpa = { }, };
+static const struct display_timing koe_tx26d202vm0bwa_timing = { + .pixelclock = { 151820000, 156720000, 159780000 }, + .hactive = { 1920, 1920, 1920 }, + .hfront_porch = { 105, 130, 142 }, + .hback_porch = { 45, 70, 82 }, + .hsync_len = { 30, 30, 30 }, + .vactive = { 1200, 1200, 1200}, + .vfront_porch = { 3, 5, 10 }, + .vback_porch = { 2, 5, 10 }, + .vsync_len = { 5, 5, 5 }, +}; + +static const struct panel_desc koe_tx26d202vm0bwa = { + .timings = &koe_tx26d202vm0bwa_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 217, + .height = 136, + }, + .delay = { + .prepare = 1000, + .enable = 1000, + .unprepare = 1000, + .disable = 1000, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_LVDS, +}; + static const struct display_timing koe_tx31d200vm0baa_timing = { .pixelclock = { 39600000, 43200000, 48000000 }, .hactive = { 1280, 1280, 1280 }, @@ -3832,6 +3863,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "koe,tx14d24vm1bpa", .data = &koe_tx14d24vm1bpa, }, { + .compatible = "koe,tx26d202vm0bwa", + .data = &koe_tx26d202vm0bwa, + }, { .compatible = "koe,tx31d200vm0baa", .data = &koe_tx31d200vm0baa, }, {
On Tue, 2 Jun 2020 at 08:17, Liu Ying victor.liu@nxp.com wrote:
This patch adds support for Kaohsiung Opto-Electronics Inc. 10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface. The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' and it's made by KOE in Taiwan.
The panel spec from USMP can be found at: https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192...
The below panel spec from KOE is basically the same to the one from USMP. However, the panel type 'TX26D202VM0BAA' is a little bit different. It looks that the two types of panel are compatible with each other. http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Signed-off-by: Liu Ying victor.liu@nxp.com
drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index b6ecd15..7c222ec 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2200,6 +2200,37 @@ static const struct panel_desc koe_tx14d24vm1bpa = { }, };
+static const struct display_timing koe_tx26d202vm0bwa_timing = {
.pixelclock = { 151820000, 156720000, 159780000 },.hactive = { 1920, 1920, 1920 },.hfront_porch = { 105, 130, 142 },.hback_porch = { 45, 70, 82 },.hsync_len = { 30, 30, 30 },.vactive = { 1200, 1200, 1200},.vfront_porch = { 3, 5, 10 },.vback_porch = { 2, 5, 10 },.vsync_len = { 5, 5, 5 },+};
+static const struct panel_desc koe_tx26d202vm0bwa = {
.timings = &koe_tx26d202vm0bwa_timing,.num_timings = 1,.bpc = 8,.size = {.width = 217,.height = 136,},.delay = {.prepare = 1000,.enable = 1000,.unprepare = 1000,.disable = 1000,
Ouch 1s for each delay is huge. Nevertheless it matches the specs so, the series is: Reviewed-by: Emil Velikov emil.l.velikov@gmail.com
Sam, Thierry I assume you'll merge the series. Let me know if I should pick it up.
-Emil
Hi Emil.
On Tue, Jun 02, 2020 at 01:46:19PM +0100, Emil Velikov wrote:
On Tue, 2 Jun 2020 at 08:17, Liu Ying victor.liu@nxp.com wrote:
This patch adds support for Kaohsiung Opto-Electronics Inc. 10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface. The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' and it's made by KOE in Taiwan.
The panel spec from USMP can be found at: https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192...
The below panel spec from KOE is basically the same to the one from USMP. However, the panel type 'TX26D202VM0BAA' is a little bit different. It looks that the two types of panel are compatible with each other. http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Signed-off-by: Liu Ying victor.liu@nxp.com
drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index b6ecd15..7c222ec 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2200,6 +2200,37 @@ static const struct panel_desc koe_tx14d24vm1bpa = { }, };
+static const struct display_timing koe_tx26d202vm0bwa_timing = {
.pixelclock = { 151820000, 156720000, 159780000 },.hactive = { 1920, 1920, 1920 },.hfront_porch = { 105, 130, 142 },.hback_porch = { 45, 70, 82 },.hsync_len = { 30, 30, 30 },.vactive = { 1200, 1200, 1200},.vfront_porch = { 3, 5, 10 },.vback_porch = { 2, 5, 10 },.vsync_len = { 5, 5, 5 },+};
+static const struct panel_desc koe_tx26d202vm0bwa = {
.timings = &koe_tx26d202vm0bwa_timing,.num_timings = 1,.bpc = 8,.size = {.width = 217,.height = 136,},.delay = {.prepare = 1000,.enable = 1000,.unprepare = 1000,.disable = 1000,Ouch 1s for each delay is huge. Nevertheless it matches the specs so, the series is: Reviewed-by: Emil Velikov emil.l.velikov@gmail.com
Sam, Thierry I assume you'll merge the series. Let me know if I should pick it up.
I am quite busy with non-linux stuff these days so fine if you can pick them up. I like that simple panel patches are processed fast.
I expect to have some hours for linux work friday or saturday, but no promises...
Sam
-Emil
On Tue, 2 Jun 2020 at 21:57, Sam Ravnborg sam@ravnborg.org wrote:
Hi Emil.
On Tue, Jun 02, 2020 at 01:46:19PM +0100, Emil Velikov wrote:
On Tue, 2 Jun 2020 at 08:17, Liu Ying victor.liu@nxp.com wrote:
This patch adds support for Kaohsiung Opto-Electronics Inc. 10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface. The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' and it's made by KOE in Taiwan.
The panel spec from USMP can be found at: https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192...
The below panel spec from KOE is basically the same to the one from USMP. However, the panel type 'TX26D202VM0BAA' is a little bit different. It looks that the two types of panel are compatible with each other. http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Signed-off-by: Liu Ying victor.liu@nxp.com
drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index b6ecd15..7c222ec 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2200,6 +2200,37 @@ static const struct panel_desc koe_tx14d24vm1bpa = { }, };
+static const struct display_timing koe_tx26d202vm0bwa_timing = {
.pixelclock = { 151820000, 156720000, 159780000 },.hactive = { 1920, 1920, 1920 },.hfront_porch = { 105, 130, 142 },.hback_porch = { 45, 70, 82 },.hsync_len = { 30, 30, 30 },.vactive = { 1200, 1200, 1200},.vfront_porch = { 3, 5, 10 },.vback_porch = { 2, 5, 10 },.vsync_len = { 5, 5, 5 },+};
+static const struct panel_desc koe_tx26d202vm0bwa = {
.timings = &koe_tx26d202vm0bwa_timing,.num_timings = 1,.bpc = 8,.size = {.width = 217,.height = 136,},.delay = {.prepare = 1000,.enable = 1000,.unprepare = 1000,.disable = 1000,Ouch 1s for each delay is huge. Nevertheless it matches the specs so, the series is: Reviewed-by: Emil Velikov emil.l.velikov@gmail.com
Sam, Thierry I assume you'll merge the series. Let me know if I should pick it up.
I am quite busy with non-linux stuff these days so fine if you can pick them up. I like that simple panel patches are processed fast.
I expect to have some hours for linux work friday or saturday, but no promises...
Don't worry - once the DT maintainers ack 1/2, I'll merge the series.
-Emil
Hi Emil.
I expect to have some hours for linux work friday or saturday, but no promises...
Don't worry - once the DT maintainers ack 1/2, I'll merge the series.
If it is in alphabetical order then we are good to go. For such simple patches we do not need DT maintainer ack. You can add my: r-b then you are fully covered.
Sam
-Emil
Hi Emil.
.width = 217,.height = 136,},.delay = {.prepare = 1000,.enable = 1000,.unprepare = 1000,.disable = 1000,Ouch 1s for each delay is huge. Nevertheless it matches the specs so, the series is: Reviewed-by: Emil Velikov emil.l.velikov@gmail.com
Sam, Thierry I assume you'll merge the series. Let me know if I should pick it up.
I went ahead and applied both patches to drm-misc-next. They are now pushed out.
Sam
-Emil
dri-devel@lists.freedesktop.org
-
Emil Velikov -
Liu Ying -
Sam Ravnborg