From: Arnd Bergmann arnd@arndb.de

[ Upstream commit 33ce7f2f95cabb5834cf0906308a5cb6103976da ]

When CONFIG_OF is disabled, building with 'make W=1' produces warnings about out of bounds array access:

drivers/gpu/drm/imx/imx-ldb.c: In function 'imx_ldb_set_clock.constprop': drivers/gpu/drm/imx/imx-ldb.c:186:8: error: array subscript -22 is below array bounds of 'struct clk *[4]' [-Werror=array-bounds]

Add an error check before the index is used, which helps with the warning, as well as any possible other error condition that may be triggered at runtime.

The warning could be fixed by adding a Kconfig depedency on CONFIG_OF, but Liu Ying points out that the driver may hit the out-of-bounds problem at runtime anyway.

Signed-off-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Liu Ying victor.liu@nxp.com Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/imx/imx-ldb.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 41e2978cb1eb..75036aaa0c63 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -190,6 +190,11 @@ static void imx_ldb_encoder_enable(struct drm_encoder *encoder) int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; int mux = drm_of_encoder_active_port_id(imx_ldb_ch->child, encoder);

+ if (mux < 0 || mux >= ARRAY_SIZE(ldb->clk_sel)) { + dev_warn(ldb->dev, "%s: invalid mux %d\n", __func__, mux); + return; + } + drm_panel_prepare(imx_ldb_ch->panel);

if (dual) { @@ -248,6 +253,11 @@ imx_ldb_encoder_atomic_mode_set(struct drm_encoder *encoder, int mux = drm_of_encoder_active_port_id(imx_ldb_ch->child, encoder); u32 bus_format = imx_ldb_ch->bus_format;

+ if (mux < 0 || mux >= ARRAY_SIZE(ldb->clk_sel)) { + dev_warn(ldb->dev, "%s: invalid mux %d\n", __func__, mux); + return; + } + if (mode->clock > 170000) { dev_warn(ldb->dev, "%s: mode exceeds 170 MHz pixel clock\n", __func__);