drm_atomic_helper_check_plane_state() takes care of checking the scaling capabilities and calculating the clipped X/Y offsets for us.

Rely on this function instead of open-coding the logic.

Incidentally, it seems to fix a problem we had with negative X/Y positioning of YUV planes.

Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com --- Changes in v2: - Grabbed authorship and dropped Eric's SoB - Re-introduced vc4_state->crtc/src_x/y/w/h fields --- drivers/gpu/drm/vc4/vc4_plane.c | 102 ++++++++++++++++++++-------------------- 1 file changed, 52 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index a3275fa66b7b..269a5f46b35f 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -267,30 +267,59 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) u32 subpixel_src_mask = (1 << 16) - 1; u32 format = fb->format->format; int num_planes = fb->format->num_planes; - u32 h_subsample = 1; - u32 v_subsample = 1; - int i; + int min_scale = 1, max_scale = INT_MAX; + struct drm_crtc_state *crtc_state; + u32 h_subsample, v_subsample; + int i, ret; + + crtc_state = drm_atomic_get_existing_crtc_state(state->state, + state->crtc); + if (!crtc_state) { + DRM_DEBUG_KMS("Invalid crtc state\n"); + return -EINVAL; + } + + /* No configuring scaling on the cursor plane, since it gets + * non-vblank-synced updates, and scaling requires LBM changes which + * have to be vblank-synced. + */ + if (plane->type == DRM_PLANE_TYPE_CURSOR) { + min_scale = DRM_PLANE_HELPER_NO_SCALING; + max_scale = DRM_PLANE_HELPER_NO_SCALING; + } else { + min_scale = 1; + max_scale = INT_MAX; + } + + ret = drm_atomic_helper_check_plane_state(state, crtc_state, + min_scale, max_scale, + true, true); + if (ret) + return ret; + + h_subsample = drm_format_horz_chroma_subsampling(format); + v_subsample = drm_format_vert_chroma_subsampling(format);

for (i = 0; i < num_planes; i++) vc4_state->offsets[i] = bo->paddr + fb->offsets[i];

/* We don't support subpixel source positioning for scaling. */ - if ((state->src_x & subpixel_src_mask) || - (state->src_y & subpixel_src_mask) || - (state->src_w & subpixel_src_mask) || - (state->src_h & subpixel_src_mask)) { + if ((state->src.x1 & subpixel_src_mask) || + (state->src.x2 & subpixel_src_mask) || + (state->src.y1 & subpixel_src_mask) || + (state->src.y2 & subpixel_src_mask)) { return -EINVAL; }

- vc4_state->src_x = state->src_x >> 16; - vc4_state->src_y = state->src_y >> 16; - vc4_state->src_w[0] = state->src_w >> 16; - vc4_state->src_h[0] = state->src_h >> 16; + vc4_state->src_x = state->src.x1 >> 16; + vc4_state->src_y = state->src.y1 >> 16; + vc4_state->src_w[0] = (state->src.x2 - state->src.x1) >> 16; + vc4_state->src_h[0] = (state->src.y2 - state->src.y1) >> 16;

- vc4_state->crtc_x = state->crtc_x; - vc4_state->crtc_y = state->crtc_y; - vc4_state->crtc_w = state->crtc_w; - vc4_state->crtc_h = state->crtc_h; + vc4_state->crtc_x = state->dst.x1; + vc4_state->crtc_y = state->dst.y1; + vc4_state->crtc_w = state->dst.x2 - state->dst.x1; + vc4_state->crtc_h = state->dst.y2 - state->dst.y1;

vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0], vc4_state->crtc_w); @@ -303,8 +332,6 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) if (num_planes > 1) { vc4_state->is_yuv = true;

- h_subsample = drm_format_horz_chroma_subsampling(format); - v_subsample = drm_format_vert_chroma_subsampling(format); vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample; vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;

@@ -326,39 +353,14 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_state->y_scaling[1] = VC4_SCALING_NONE; }

- /* No configuring scaling on the cursor plane, since it gets - non-vblank-synced updates, and scaling requires requires - LBM changes which have to be vblank-synced. - */ - if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity) - return -EINVAL; - - /* Clamp the on-screen start x/y to 0. The hardware doesn't - * support negative y, and negative x wastes bandwidth. - */ - if (vc4_state->crtc_x < 0) { - for (i = 0; i < num_planes; i++) { - u32 cpp = fb->format->cpp[i]; - u32 subs = ((i == 0) ? 1 : h_subsample); - - vc4_state->offsets[i] += (cpp * - (-vc4_state->crtc_x) / subs); - } - vc4_state->src_w[0] += vc4_state->crtc_x; - vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample; - vc4_state->crtc_x = 0; - } - - if (vc4_state->crtc_y < 0) { - for (i = 0; i < num_planes; i++) { - u32 subs = ((i == 0) ? 1 : v_subsample); - - vc4_state->offsets[i] += (fb->pitches[i] * - (-vc4_state->crtc_y) / subs); - } - vc4_state->src_h[0] += vc4_state->crtc_y; - vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample; - vc4_state->crtc_y = 0; + /* Adjust the base pointer to the first pixel to be scanned out. */ + for (i = 0; i < num_planes; i++) { + vc4_state->offsets[i] += (vc4_state->src_y / + (i ? v_subsample : 1)) * + fb->pitches[i]; + vc4_state->offsets[i] += (vc4_state->src_x / + (i ? h_subsample : 1)) * + fb->format->cpp[i]; }

return 0;

X/Y positioning of T-format buffers is quite tricky and the current implementation was failing to position a plane using this format correctly when the CRTC X, Y or both X and Y offsets were negative. It was also failing when the SRC X/Y offsets were != 0.

Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Reviewed-by: Eric Anholt eric@anholt.net --- Changes in v2: - Adjusted the commit message - Fixed the comment explaining why h_mask is 63 - Dropped Eric's SoB and grabbed authorship --- drivers/gpu/drm/vc4/vc4_plane.c | 50 +++++++++++++++++++++++++++++++++++------ 1 file changed, 43 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 8b61574744bf..651f503c209a 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -525,22 +525,58 @@ static int vc4_plane_mode_set(struct drm_plane *plane, (i ? h_subsample : 1) * fb->format->cpp[i]; } + break;

case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: { - /* For T-tiled, the FB pitch is "how many bytes from - * one row to the next, such that pitch * tile_h == - * tile_size * tiles_per_row." - */ u32 tile_size_shift = 12; /* T tiles are 4kb */ + /* Whole-tile offsets, mostly for setting the pitch. */ + u32 tile_w_shift = fb->format->cpp[0] == 2 ? 6 : 5; u32 tile_h_shift = 5; /* 16 and 32bpp are 32 pixels high */ + u32 tile_w_mask = (1 << tile_w_shift) - 1; + /* The height mask on 32-bit-per-pixel tiles is 63, i.e. twice + * the height (in pixels) of a 4k tile. + */ + u32 tile_h_mask = (2 << tile_h_shift) - 1; + /* For T-tiled, the FB pitch is "how many bytes from one row to + * the next, such that + * + * pitch * tile_h == tile_size * tiles_per_row + */ u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift); + u32 tiles_l = vc4_state->src_x >> tile_w_shift; + u32 tiles_r = tiles_w - tiles_l; + u32 tiles_t = vc4_state->src_y >> tile_h_shift; + /* Intra-tile offsets, which modify the base address (the + * SCALER_PITCH0_TILE_Y_OFFSET tells HVS how to walk from that + * base address). + */ + u32 tile_y = (vc4_state->src_y >> 4) & 1; + u32 subtile_y = (vc4_state->src_y >> 2) & 3; + u32 utile_y = vc4_state->src_y & 3; + u32 x_off = vc4_state->src_x & tile_w_mask; + u32 y_off = vc4_state->src_y & tile_h_mask;

tiling = SCALER_CTL0_TILING_256B_OR_T; + pitch0 = (VC4_SET_FIELD(x_off, SCALER_PITCH0_SINK_PIX) | + VC4_SET_FIELD(y_off, SCALER_PITCH0_TILE_Y_OFFSET) | + VC4_SET_FIELD(tiles_l, SCALER_PITCH0_TILE_WIDTH_L) | + VC4_SET_FIELD(tiles_r, SCALER_PITCH0_TILE_WIDTH_R)); + vc4_state->offsets[0] += tiles_t * (tiles_w << tile_size_shift); + vc4_state->offsets[0] += subtile_y << 8; + vc4_state->offsets[0] += utile_y << 4; + + /* Rows of tiles alternate left-to-right and right-to-left. */ + if (tiles_t & 1) { + pitch0 |= SCALER_PITCH0_TILE_INITIAL_LINE_DIR; + vc4_state->offsets[0] += (tiles_w - tiles_l) << + tile_size_shift; + vc4_state->offsets[0] -= (1 + !tile_y) << 10; + } else { + vc4_state->offsets[0] += tiles_l << tile_size_shift; + vc4_state->offsets[0] += tile_y << 10; + }

- pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET) | - VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L) | - VC4_SET_FIELD(tiles_w, SCALER_PITCH0_TILE_WIDTH_R)); break; }

On Fri, 3 Aug 2018 11:22:27 +0200 Boris Brezillon boris.brezillon@bootlin.com wrote:

From: Eric Anholt eric@anholt.net

Y_OFFSET field starts at bit 8 not 7.

Signed-off-by: Eric Anholt eric@anholt.net Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com

As discussed with Eric 2 weeks ago, I'm about to apply this series to drm-misc-fixes. The rational behind this decision is that those patches are actually fixing the driver, even though they don't all have Fixes and Cc-stable tags.

Daniel, any objection?

---

Changes in v2:

• None

---

drivers/gpu/drm/vc4/vc4_regs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h index d6864fa4bd14..ccbd6b377ffe 100644 --- a/drivers/gpu/drm/vc4/vc4_regs.h +++ b/drivers/gpu/drm/vc4/vc4_regs.h @@ -1043,8 +1043,8 @@ enum hvs_pixel_format { #define SCALER_PITCH0_TILE_LINE_DIR BIT(15) #define SCALER_PITCH0_TILE_INITIAL_LINE_DIR BIT(14) /* Y offset within a tile. */ -#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 7) -#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 7 +#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 8) +#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 8 #define SCALER_PITCH0_TILE_WIDTH_R_MASK VC4_MASK(6, 0) #define SCALER_PITCH0_TILE_WIDTH_R_SHIFT 0

On Fri, 3 Aug 2018 11:22:27 +0200 Boris Brezillon boris.brezillon@bootlin.com wrote:

From: Eric Anholt eric@anholt.net

Y_OFFSET field starts at bit 8 not 7.

Signed-off-by: Eric Anholt eric@anholt.net Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com

Queued the series to drm-misc-fixes.

---

Changes in v2:

• None

---

drivers/gpu/drm/vc4/vc4_regs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h index d6864fa4bd14..ccbd6b377ffe 100644 --- a/drivers/gpu/drm/vc4/vc4_regs.h +++ b/drivers/gpu/drm/vc4/vc4_regs.h @@ -1043,8 +1043,8 @@ enum hvs_pixel_format { #define SCALER_PITCH0_TILE_LINE_DIR BIT(15) #define SCALER_PITCH0_TILE_INITIAL_LINE_DIR BIT(14) /* Y offset within a tile. */ -#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 7) -#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 7 +#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 8) +#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 8 #define SCALER_PITCH0_TILE_WIDTH_R_MASK VC4_MASK(6, 0) #define SCALER_PITCH0_TILE_WIDTH_R_SHIFT 0