On Wed, Dec 9, 2020 at 12:43 PM Hsin-Yi Wang hsinyi@chromium.org wrote:

On Mon, Nov 23, 2020 at 11:47 AM Hsin-Yi Wang hsinyi@chromium.org wrote:

...

When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby().

Signed-off-by: Hsin-Yi Wang hsinyi@chromium.org

Gentle ping on the patch

After some testing, the powering sequence has some issue and would cause i2c failures. The powering sequence needs to be rechecked.

...

---

Change: v2: none

---

drivers/gpu/drm/bridge/analogix/anx7625.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + 2 files changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 65cc05982f82..eb9c4cc2504a 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/workqueue.h> @@ -875,12 +876,20 @@ static int sp_tx_edid_read(struct anx7625_data *ctx, static void anx7625_power_on(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev;

•   int ret;
  
    if (!ctx->pdata.low_power_mode) {
            DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
            return;
    }
  
  

•   ret = regulator_bulk_enable(ARRAY_SIZE(ctx->pdata.supplies),
  

•                               ctx->pdata.supplies);
  

•   if (ret < 0) {
  

•           DRM_DEV_DEBUG_DRIVER(dev, "cannot enable regulators %d\n", ret);
  

•           return;
  

•   }
  

•   /* Power on pin enable */
    gpiod_set_value(ctx->pdata.gpio_p_on, 1);
    usleep_range(10000, 11000);
  

@@ -894,6 +903,7 @@ static void anx7625_power_on(struct anx7625_data *ctx) static void anx7625_power_standby(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev;

•   int ret;
  
    if (!ctx->pdata.low_power_mode) {
            DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
  

@@ -904,6 +914,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx) usleep_range(1000, 1100); gpiod_set_value(ctx->pdata.gpio_p_on, 0); usleep_range(1000, 1100);

•   ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
  

•                                ctx->pdata.supplies);
  

•   if (ret < 0)
  

•           DRM_DEV_DEBUG_DRIVER(dev, "cannot disable regulators %d\n", ret);
  

•   DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
  

}

@@ -1742,6 +1758,15 @@ static int anx7625_i2c_probe(struct i2c_client *client, platform->client = client; i2c_set_clientdata(client, platform);

•   pdata->supplies[0].supply = "vdd10";
  

•   pdata->supplies[1].supply = "vdd18";
  

•   pdata->supplies[2].supply = "vdd33";
  

•   ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
  

•                                 pdata->supplies);
  

•   if (ret) {
  

•           DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
  

•           return ret;
  

•   }
    anx7625_init_gpio(platform);
  
    atomic_set(&platform->power_status, 0);
  

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 193ad86c5450..e4a086b3a3d7 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -350,6 +350,7 @@ struct s_edid_data { struct anx7625_platform_data { struct gpio_desc *gpio_p_on; struct gpio_desc *gpio_reset;

•   struct regulator_bulk_data supplies[3];
    struct drm_bridge *panel_bridge;
    int intp_irq;
    u32 low_power_mode;
  

-- 2.29.2.454.gaff20da3a2-goog