The parallel-display driver used an undocumented, non-standard property "fsl,panel" to optionally associate with a drm_panel device. This patch fixes the driver to use the same OF graph bindings as the LDB driver instead:

parallel-display { compatible = "fsl,imx-parallel-display"; ...

port@1 { reg = <1>;

parallel_out: endpoint { remote_endpoint = <&panel_in>; }; }; };

panel { ...

port { panel_in: endpoint { remote-endpoint = <&parallel_out>; }; }; };

Signed-off-by: Philipp Zabel p.zabel@pengutronix.de --- .../devicetree/bindings/drm/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++-- drivers/gpu/drm/imx/parallel-display.c | 21 ++++++++++++----- 2 files changed, 39 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt index f349703..29c0467 100644 --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel.

example:

@@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24";

- port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 78db5d4..c663099 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -21,6 +21,7 @@ #include <drm/drm_panel.h> #include <linux/videodev2.h> #include <video/of_display_timing.h> +#include <linux/of_graph.h>

#include "imx-drm.h"

@@ -216,7 +217,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = data; struct device_node *np = dev->of_node; - struct device_node *panel_node; + struct device_node *port; const u8 *edidp; struct imx_parallel_display *imxpd; int ret; @@ -245,11 +246,19 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) imxpd->interface_pix_fmt = V4L2_PIX_FMT_BGR24; }

- panel_node = of_parse_phandle(np, "fsl,panel", 0); - if (panel_node) { - imxpd->panel = of_drm_find_panel(panel_node); - if (!imxpd->panel) - return -EPROBE_DEFER; + /* port@1 is the output port */ + port = of_graph_get_port_by_id(np, 1); + if (port) { + struct device_node *endpoint, *remote; + + endpoint = of_get_child_by_name(port, "endpoint"); + if (endpoint) { + remote = of_graph_get_remote_port_parent(endpoint); + if (remote) + imxpd->panel = of_drm_find_panel(remote); + if (!imxpd->panel) + return -EPROBE_DEFER; + } }

imxpd->dev = dev;