Because we record connector_mask using 1 << drm_connector_index now the connector_mask should stay the same even when other connectors are removed. This was not the case with MST, in that case when removing a connector all other connectors may change their index.
This is fixed by waiting until the first get_connector_state to allocate connector_state, and force reallocation when state is too small.
As a side effect connector arrays no longer have to be preallocated, and can be allocated on first use which means a less allocations in the page flip only path.
Fixes: 14de6c44d149 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.") Signed-off-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com --- drivers/gpu/drm/drm_atomic.c | 45 +++++++++++++++++-------------------- drivers/gpu/drm/drm_atomic_helper.c | 2 +- drivers/gpu/drm/drm_crtc.c | 45 +++++++++++++------------------------ include/drm/drm_crtc.h | 8 ++++++- 4 files changed, 45 insertions(+), 55 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 8fb469c4e4b8..5d4774450540 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -65,8 +65,6 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state) */ state->allow_modeset = true;
- state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector); - state->crtcs = kcalloc(dev->mode_config.num_crtc, sizeof(*state->crtcs), GFP_KERNEL); if (!state->crtcs) @@ -83,16 +81,6 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state) sizeof(*state->plane_states), GFP_KERNEL); if (!state->plane_states) goto fail; - state->connectors = kcalloc(state->num_connector, - sizeof(*state->connectors), - GFP_KERNEL); - if (!state->connectors) - goto fail; - state->connector_states = kcalloc(state->num_connector, - sizeof(*state->connector_states), - GFP_KERNEL); - if (!state->connector_states) - goto fail;
state->dev = dev;
@@ -823,19 +811,28 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
index = drm_connector_index(connector);
- /* - * Construction of atomic state updates can race with a connector - * hot-add which might overflow. In this case flip the table and just - * restart the entire ioctl - no one is fast enough to livelock a cpu - * with physical hotplug events anyway. - * - * Note that we only grab the indexes once we have the right lock to - * prevent hotplug/unplugging of connectors. So removal is no problem, - * at most the array is a bit too large. - */ if (index >= state->num_connector) { - DRM_DEBUG_ATOMIC("Hot-added connector would overflow state array, restarting\n"); - return ERR_PTR(-EAGAIN); + struct drm_connector **c; + struct drm_connector_state **cs; + + u32 alloc = max(index + 1, config->num_connector); + + c = krealloc(state->connectors, alloc * sizeof(*state->connectors), GFP_KERNEL); + if (!c) + return ERR_PTR(-ENOMEM); + + state->connectors = c; + memset(&state->connectors[state->num_connector], 0, + sizeof(*state->connectors) * (alloc - state->num_connector)); + + cs = krealloc(state->connector_states, alloc * sizeof(*state->connector_states), GFP_KERNEL); + if (!cs) + return ERR_PTR(-ENOMEM); + + state->connector_states = cs; + memset(&state->connector_states[state->num_connector], 0, + sizeof(*state->connector_states) * (alloc - state->num_connector)); + state->num_connector = alloc; }
if (state->connector_states[index]) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 2b430b05f35d..4da4f2a49078 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1535,7 +1535,7 @@ void drm_atomic_helper_swap_state(struct drm_device *dev, { int i;
- for (i = 0; i < dev->mode_config.num_connector; i++) { + for (i = 0; i < state->num_connector; i++) { struct drm_connector *connector = state->connectors[i];
if (!connector) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 65258acddb90..ea00aea88de7 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -918,12 +918,18 @@ int drm_connector_init(struct drm_device *dev, connector->base.properties = &connector->properties; connector->dev = dev; connector->funcs = funcs; + connector->connector_id = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL); + if (connector->connector_id < 0) { + ret = connector->connector_id; + goto out_put; + } + connector->connector_type = connector_type; connector->connector_type_id = ida_simple_get(connector_ida, 1, 0, GFP_KERNEL); if (connector->connector_type_id < 0) { ret = connector->connector_type_id; - goto out_put; + goto out_put_id; } connector->name = kasprintf(GFP_KERNEL, "%s-%d", @@ -931,7 +937,7 @@ int drm_connector_init(struct drm_device *dev, connector->connector_type_id); if (!connector->name) { ret = -ENOMEM; - goto out_put; + goto out_put_type_id; }
INIT_LIST_HEAD(&connector->probed_modes); @@ -959,7 +965,12 @@ int drm_connector_init(struct drm_device *dev, }
connector->debugfs_entry = NULL; - +out_put_type_id: + if (ret) + ida_remove(connector_ida, connector->connector_type_id); +out_put_id: + if (ret) + ida_remove(&config->connector_ida, connector->connector_id); out_put: if (ret) drm_mode_object_put(dev, &connector->base); @@ -1013,32 +1024,6 @@ void drm_connector_cleanup(struct drm_connector *connector) EXPORT_SYMBOL(drm_connector_cleanup);
/** - * drm_connector_index - find the index of a registered connector - * @connector: connector to find index for - * - * Given a registered connector, return the index of that connector within a DRM - * device's list of connectors. - */ -unsigned int drm_connector_index(struct drm_connector *connector) -{ - unsigned int index = 0; - struct drm_connector *tmp; - struct drm_mode_config *config = &connector->dev->mode_config; - - WARN_ON(!drm_modeset_is_locked(&config->connection_mutex)); - - drm_for_each_connector(tmp, connector->dev) { - if (tmp == connector) - return index; - - index++; - } - - BUG(); -} -EXPORT_SYMBOL(drm_connector_index); - -/** * drm_connector_register - register a connector * @connector: the connector to register * @@ -5838,6 +5823,7 @@ void drm_mode_config_init(struct drm_device *dev) INIT_LIST_HEAD(&dev->mode_config.plane_list); idr_init(&dev->mode_config.crtc_idr); idr_init(&dev->mode_config.tile_idr); + ida_init(&dev->mode_config.connector_ida);
drm_modeset_lock_all(dev); drm_mode_create_standard_properties(dev); @@ -5918,6 +5904,7 @@ void drm_mode_config_cleanup(struct drm_device *dev) crtc->funcs->destroy(crtc); }
+ ida_destroy(&dev->mode_config.connector_ida); idr_destroy(&dev->mode_config.tile_idr); idr_destroy(&dev->mode_config.crtc_idr); drm_modeset_lock_fini(&dev->mode_config.connection_mutex); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 8c7fb3d0f9d0..7fad193dc645 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1168,6 +1168,7 @@ struct drm_connector { struct drm_mode_object base;
char *name; + int connector_id; int connector_type; int connector_type_id; bool interlace_allowed; @@ -2049,6 +2050,7 @@ struct drm_mode_config { struct list_head fb_list;
int num_connector; + struct ida connector_ida; struct list_head connector_list; int num_encoder; struct list_head encoder_list; @@ -2213,7 +2215,11 @@ int drm_connector_register(struct drm_connector *connector); void drm_connector_unregister(struct drm_connector *connector);
extern void drm_connector_cleanup(struct drm_connector *connector); -extern unsigned int drm_connector_index(struct drm_connector *connector); +static inline unsigned drm_connector_index(struct drm_connector *connector) +{ + return connector->connector_id; +} + /* helper to unplug all connectors from sysfs for device */ extern void drm_connector_unplug_all(struct drm_device *dev);
Hi Maarten,
[auto build test WARNING on drm/drm-next] [also build test WARNING on v4.5-rc4 next-20160215] [if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Maarten-Lankhorst/drm-atomic-Allow-... base: git://people.freedesktop.org/~airlied/linux.git drm-next reproduce: make htmldocs
All warnings (new ones prefixed by >>):
drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'fmt' include/drm/drm_crtc.h:359: warning: No description found for parameter 'mode_blob' include/drm/drm_crtc.h:774: warning: No description found for parameter 'name'
include/drm/drm_crtc.h:1233: warning: No description found for parameter 'connector_id'
include/drm/drm_crtc.h:1233: warning: No description found for parameter 'tile_blob_ptr' include/drm/drm_crtc.h:1272: warning: No description found for parameter 'rotation' include/drm/drm_crtc.h:1534: warning: No description found for parameter 'name' include/drm/drm_crtc.h:1534: warning: No description found for parameter 'mutex' include/drm/drm_crtc.h:1534: warning: No description found for parameter 'helper_private' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tile_idr'
include/drm/drm_crtc.h:2144: warning: No description found for parameter 'connector_ida'
include/drm/drm_crtc.h:2144: warning: No description found for parameter 'delayed_event' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'edid_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'dpms_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'path_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tile_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'plane_type_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'rotation_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_src_x' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_src_y' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_src_w' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_src_h' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_crtc_x' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_crtc_y' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_crtc_w' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_crtc_h' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_fb_id' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_crtc_id' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_active' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'prop_mode_id' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'dvi_i_subconnector_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'dvi_i_select_subconnector_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_subconnector_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_select_subconnector_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_mode_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_left_margin_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_right_margin_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_top_margin_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_bottom_margin_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_brightness_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_contrast_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_flicker_reduction_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_overscan_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_saturation_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'tv_hue_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'scaling_mode_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'aspect_ratio_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'dirty_info_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'suggested_x_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'suggested_y_property' include/drm/drm_crtc.h:2144: warning: No description found for parameter 'allow_fb_modifiers' include/drm/drm_dp_helper.h:749: warning: No description found for parameter 'i2c_nack_count' include/drm/drm_dp_helper.h:749: warning: No description found for parameter 'i2c_defer_count' drivers/gpu/drm/drm_dp_mst_topology.c:2364: warning: No description found for parameter 'connector' include/drm/drm_dp_mst_helper.h:92: warning: No description found for parameter 'cached_edid' include/drm/drm_dp_mst_helper.h:92: warning: No description found for parameter 'has_audio' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'max_dpcd_transaction_bytes' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'sink_count' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'total_slots' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'avail_slots' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'total_pbn' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'qlock' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'tx_msg_downq' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'tx_down_in_progress' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'payload_lock' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'proposed_vcpis' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'payloads' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'payload_mask' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'vcpi_mask' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'tx_waitq' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'work' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'tx_work' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'destroy_connector_list' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'destroy_connector_lock' include/drm/drm_dp_mst_helper.h:466: warning: No description found for parameter 'destroy_connector_work' drivers/gpu/drm/drm_dp_mst_topology.c:2364: warning: No description found for parameter 'connector' drivers/gpu/drm/drm_irq.c:176: warning: No description found for parameter 'flags' include/drm/drmP.h:168: warning: No description found for parameter 'fmt' include/drm/drmP.h:184: warning: No description found for parameter 'fmt' include/drm/drmP.h:202: warning: No description found for parameter 'fmt' include/drm/drmP.h:247: warning: No description found for parameter 'dev' include/drm/drmP.h:247: warning: No description found for parameter 'data' include/drm/drmP.h:247: warning: No description found for parameter 'file_priv' include/drm/drmP.h:280: warning: No description found for parameter 'ioctl' include/drm/drmP.h:280: warning: No description found for parameter '_func' include/drm/drmP.h:280: warning: No description found for parameter '_flags' include/drm/drmP.h:362: warning: cannot understand function prototype: 'struct drm_lock_data ' include/drm/drmP.h:415: warning: cannot understand function prototype: 'struct drm_driver ' include/drm/drmP.h:672: warning: cannot understand function prototype: 'struct drm_info_list ' include/drm/drmP.h:682: warning: cannot understand function prototype: 'struct drm_info_node ' include/drm/drmP.h:692: warning: cannot understand function prototype: 'struct drm_minor ' include/drm/drmP.h:740: warning: cannot understand function prototype: 'struct drm_device ' drivers/gpu/drm/i915/intel_runtime_pm.c:2173: warning: No description found for parameter 'resume' drivers/gpu/drm/i915/intel_runtime_pm.c:2173: warning: No description found for parameter 'resume' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2659: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_gem.c:421: warning: No description found for parameter 'dev' drivers/gpu/drm/i915/i915_gem.c:421: warning: No description found for parameter 'data' drivers/gpu/drm/i915/i915_gem.c:421: warning: No description found for parameter 'file' drivers/gpu/drm/i915/i915_gem.c:686: warning: No description found for parameter 'dev' drivers/gpu/drm/i915/i915_gem.c:686: warning: No description found for parameter 'data' drivers/gpu/drm/i915/i915_gem.c:686: warning: No description found for parameter 'file' drivers/gpu/drm/i915/i915_gem.c:767: warning: No description found for parameter 'dev' drivers/gpu/drm/i915/i915_gem.c:767: warning: No description found for parameter 'obj' drivers/gpu/drm/i915/i915_gem.c:767: warning: No description found for parameter 'args'
vim +/connector_id +1233 include/drm/drm_crtc.h
6ba2bd3d Todd Previte 2015-04-21 1217 * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 6ba2bd3d Todd Previte 2015-04-21 1218 */ 6ba2bd3d Todd Previte 2015-04-21 1219 bool edid_corrupt; 6ba2bd3d Todd Previte 2015-04-21 1220 30f65707 Thomas Wood 2014-06-18 1221 struct dentry *debugfs_entry; 144ecb97 Daniel Vetter 2014-10-27 1222 144ecb97 Daniel Vetter 2014-10-27 1223 struct drm_connector_state *state; 40d9b043 Dave Airlie 2014-10-20 1224 40d9b043 Dave Airlie 2014-10-20 1225 /* DisplayID bits */ 40d9b043 Dave Airlie 2014-10-20 1226 bool has_tile; 40d9b043 Dave Airlie 2014-10-20 1227 struct drm_tile_group *tile_group; 40d9b043 Dave Airlie 2014-10-20 1228 bool tile_is_single_monitor; 40d9b043 Dave Airlie 2014-10-20 1229 40d9b043 Dave Airlie 2014-10-20 1230 uint8_t num_h_tile, num_v_tile; 40d9b043 Dave Airlie 2014-10-20 1231 uint8_t tile_h_loc, tile_v_loc; 40d9b043 Dave Airlie 2014-10-20 1232 uint16_t tile_h_size, tile_v_size; f453ba04 Dave Airlie 2008-11-07 @1233 }; f453ba04 Dave Airlie 2008-11-07 1234 f453ba04 Dave Airlie 2008-11-07 1235 /** 144ecb97 Daniel Vetter 2014-10-27 1236 * struct drm_plane_state - mutable plane state 07cc0ef6 Daniel Vetter 2014-11-27 1237 * @plane: backpointer to the plane 144ecb97 Daniel Vetter 2014-10-27 1238 * @crtc: currently bound CRTC, NULL if disabled cc4ceb48 Daniel Vetter 2014-07-25 1239 * @fb: currently bound framebuffer e2330f07 Daniel Vetter 2014-10-29 1240 * @fence: optional fence to wait for before scanning out @fb 144ecb97 Daniel Vetter 2014-10-27 1241 * @crtc_x: left position of visible portion of plane on crtc
:::::: The code at line 1233 was first introduced by commit :::::: f453ba0460742ad027ae0c4c7d61e62817b3e7ef DRM: add mode setting support
:::::: TO: Dave Airlie airlied@redhat.com :::::: CC: Dave Airlie airlied@linux.ie
--- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
On Mon, Feb 15, 2016 at 02:17:01PM +0100, Maarten Lankhorst wrote:
Because we record connector_mask using 1 << drm_connector_index now the connector_mask should stay the same even when other connectors are removed. This was not the case with MST, in that case when removing a connector all other connectors may change their index.
This is fixed by waiting until the first get_connector_state to allocate connector_state, and force reallocation when state is too small.
As a side effect connector arrays no longer have to be preallocated, and can be allocated on first use which means a less allocations in the page flip only path.
Fixes: 14de6c44d149 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.") Signed-off-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com
drivers/gpu/drm/drm_atomic.c | 45 +++++++++++++++++-------------------- drivers/gpu/drm/drm_atomic_helper.c | 2 +- drivers/gpu/drm/drm_crtc.c | 45 +++++++++++++------------------------ include/drm/drm_crtc.h | 8 ++++++- 4 files changed, 45 insertions(+), 55 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 8fb469c4e4b8..5d4774450540 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -65,8 +65,6 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state) */ state->allow_modeset = true;
- state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector);
- state->crtcs = kcalloc(dev->mode_config.num_crtc, sizeof(*state->crtcs), GFP_KERNEL); if (!state->crtcs)
@@ -83,16 +81,6 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state) sizeof(*state->plane_states), GFP_KERNEL); if (!state->plane_states) goto fail;
state->connectors = kcalloc(state->num_connector,
sizeof(*state->connectors),
GFP_KERNEL);
if (!state->connectors)
goto fail;
state->connector_states = kcalloc(state->num_connector,
sizeof(*state->connector_states),
GFP_KERNEL);
if (!state->connector_states)
goto fail;
state->dev = dev;
@@ -823,19 +811,28 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
index = drm_connector_index(connector);
- /*
* Construction of atomic state updates can race with a connector
* hot-add which might overflow. In this case flip the table and just
* restart the entire ioctl - no one is fast enough to livelock a cpu
* with physical hotplug events anyway.
*
* Note that we only grab the indexes once we have the right lock to
* prevent hotplug/unplugging of connectors. So removal is no problem,
* at most the array is a bit too large.
if (index >= state->num_connector) {*/
DRM_DEBUG_ATOMIC("Hot-added connector would overflow state array, restarting\n");
return ERR_PTR(-EAGAIN);
struct drm_connector **c;
struct drm_connector_state **cs;
u32 alloc = max(index + 1, config->num_connector);
Why u32?
c = krealloc(state->connectors, alloc * sizeof(*state->connectors), GFP_KERNEL);
if (!c)
return ERR_PTR(-ENOMEM);
state->connectors = c;
memset(&state->connectors[state->num_connector], 0,
sizeof(*state->connectors) * (alloc - state->num_connector));
cs = krealloc(state->connector_states, alloc * sizeof(*state->connector_states), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
state->connector_states = cs;
memset(&state->connector_states[state->num_connector], 0,
sizeof(*state->connector_states) * (alloc - state->num_connector));
state->num_connector = alloc;
}
if (state->connector_states[index])
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 2b430b05f35d..4da4f2a49078 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1535,7 +1535,7 @@ void drm_atomic_helper_swap_state(struct drm_device *dev, { int i;
- for (i = 0; i < dev->mode_config.num_connector; i++) {
for (i = 0; i < state->num_connector; i++) { struct drm_connector *connector = state->connectors[i];
if (!connector)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 65258acddb90..ea00aea88de7 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -918,12 +918,18 @@ int drm_connector_init(struct drm_device *dev, connector->base.properties = &connector->properties; connector->dev = dev; connector->funcs = funcs;
Could use an empty line here.
- connector->connector_id = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
- if (connector->connector_id < 0) {
ret = connector->connector_id;
goto out_put;
- }
- connector->connector_type = connector_type; connector->connector_type_id = ida_simple_get(connector_ida, 1, 0, GFP_KERNEL); if (connector->connector_type_id < 0) { ret = connector->connector_type_id;
goto out_put;
} connector->name = kasprintf(GFP_KERNEL, "%s-%d",goto out_put_id;
@@ -931,7 +937,7 @@ int drm_connector_init(struct drm_device *dev, connector->connector_type_id); if (!connector->name) { ret = -ENOMEM;
goto out_put;
goto out_put_type_id;
}
INIT_LIST_HEAD(&connector->probed_modes);
@@ -959,7 +965,12 @@ int drm_connector_init(struct drm_device *dev, }
connector->debugfs_entry = NULL;
+out_put_type_id:
- if (ret)
ida_remove(connector_ida, connector->connector_type_id);
+out_put_id:
- if (ret)
ida_remove(&config->connector_ida, connector->connector_id);
Should there be an ida_remove() call somewhere when unregistering or destroying the connector?
BTW looking at intel_dp_destroy_mst_connector(), shouldn't we unregister/do something before we do the modeset? What's there to prevent userspac/someone from racing with this and re-enabling the connector before we unregister it? Or maybe the connector is already defunct by this time and something else will prevent any modeset using the connector from succeeding?
out_put: if (ret) drm_mode_object_put(dev, &connector->base); @@ -1013,32 +1024,6 @@ void drm_connector_cleanup(struct drm_connector *connector) EXPORT_SYMBOL(drm_connector_cleanup);
/**
- drm_connector_index - find the index of a registered connector
- @connector: connector to find index for
- Given a registered connector, return the index of that connector within a DRM
- device's list of connectors.
- */
-unsigned int drm_connector_index(struct drm_connector *connector) -{
- unsigned int index = 0;
- struct drm_connector *tmp;
- struct drm_mode_config *config = &connector->dev->mode_config;
- WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
- drm_for_each_connector(tmp, connector->dev) {
if (tmp == connector)
return index;
index++;
- }
- BUG();
-} -EXPORT_SYMBOL(drm_connector_index);
-/**
- drm_connector_register - register a connector
- @connector: the connector to register
@@ -5838,6 +5823,7 @@ void drm_mode_config_init(struct drm_device *dev) INIT_LIST_HEAD(&dev->mode_config.plane_list); idr_init(&dev->mode_config.crtc_idr); idr_init(&dev->mode_config.tile_idr);
ida_init(&dev->mode_config.connector_ida);
drm_modeset_lock_all(dev); drm_mode_create_standard_properties(dev);
@@ -5918,6 +5904,7 @@ void drm_mode_config_cleanup(struct drm_device *dev) crtc->funcs->destroy(crtc); }
- ida_destroy(&dev->mode_config.connector_ida); idr_destroy(&dev->mode_config.tile_idr); idr_destroy(&dev->mode_config.crtc_idr); drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 8c7fb3d0f9d0..7fad193dc645 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1168,6 +1168,7 @@ struct drm_connector { struct drm_mode_object base;
char *name;
- int connector_id; int connector_type; int connector_type_id; bool interlace_allowed;
@@ -2049,6 +2050,7 @@ struct drm_mode_config { struct list_head fb_list;
int num_connector;
- struct ida connector_ida; struct list_head connector_list; int num_encoder; struct list_head encoder_list;
@@ -2213,7 +2215,11 @@ int drm_connector_register(struct drm_connector *connector); void drm_connector_unregister(struct drm_connector *connector);
extern void drm_connector_cleanup(struct drm_connector *connector); -extern unsigned int drm_connector_index(struct drm_connector *connector); +static inline unsigned drm_connector_index(struct drm_connector *connector) +{
- return connector->connector_id;
+}
/* helper to unplug all connectors from sysfs for device */ extern void drm_connector_unplug_all(struct drm_device *dev);
-- 2.1.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
On 16 February 2016 at 21:37, Ville Syrjälä ville.syrjala@linux.intel.com wrote:
On Mon, Feb 15, 2016 at 02:17:01PM +0100, Maarten Lankhorst wrote:
Because we record connector_mask using 1 << drm_connector_index now the connector_mask should stay the same even when other connectors are removed. This was not the case with MST, in that case when removing a connector all other connectors may change their index.
This is fixed by waiting until the first get_connector_state to allocate connector_state, and force reallocation when state is too small.
As a side effect connector arrays no longer have to be preallocated, and can be allocated on first use which means a less allocations in the page flip only path.
Daniel you said something on irc about v2 of this for -fixes? Did I miss v2?
Dave.
Op 19-02-16 om 04:21 schreef Dave Airlie:
On 16 February 2016 at 21:37, Ville Syrjälä ville.syrjala@linux.intel.com wrote:
On Mon, Feb 15, 2016 at 02:17:01PM +0100, Maarten Lankhorst wrote:
Because we record connector_mask using 1 << drm_connector_index now the connector_mask should stay the same even when other connectors are removed. This was not the case with MST, in that case when removing a connector all other connectors may change their index.
This is fixed by waiting until the first get_connector_state to allocate connector_state, and force reallocation when state is too small.
As a side effect connector arrays no longer have to be preallocated, and can be allocated on first use which means a less allocations in the page flip only path.
Daniel you said something on irc about v2 of this for -fixes? Did I miss v2?
Dave.
"[PATCH v2] drm/atomic: Allow for holes in connector state, v2."
It wasn't sent in this thread to give CI a chance to run.
dri-devel@lists.freedesktop.org