On 2016年01月13日 02:05, John Keeping wrote:

Commit dbb3d94 (drm/rockchip: vop: move interrupt registers into vop_data) introduced new macros for updating the interrupt control registers but these always use the mask from the register definition without refining it for the particular bits that are being changed.

This means that whenever we enable/disable a particular interrupt we end up disabling all of the others as a side effect.

Signed-off-by: John Keeping john@metanate.com

drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 46c2a8d..fd37054 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -43,8 +43,8 @@

#define REG_SET(x, base, reg, v, mode) \ __REG_SET_##mode(x, base + reg.offset, reg.mask, reg.shift, v) -#define REG_SET_MASK(x, base, reg, v, mode) \

• __REG_SET_##mode(x, base + reg.offset, reg.mask, reg.shift, v)
  

+#define REG_SET_MASK(x, base, reg, mask, v, mode) \

• __REG_SET_##mode(x, base + reg.offset, mask, reg.shift, v)
  
  

  #define VOP_WIN_SET(x, win, name, v) \ REG_SET(x, win->base, win->phy->name, v, RELAXED)

@@ -58,16 +58,18 @@ #define VOP_INTR_GET(vop, name) \ vop_read_reg(vop, 0, &vop->data->ctrl->name)

-#define VOP_INTR_SET(vop, name, v) \

• REG_SET(vop, 0, vop->data->intr->name, v, NORMAL)
  

+#define VOP_INTR_SET(vop, name, mask, v) \

• REG_SET_MASK(vop, 0, vop->data->intr->name, mask, v, NORMAL)
  

  #define VOP_INTR_SET_TYPE(vop, name, type, v) \ do { \

• int i, reg = 0; \
  

• int i, reg = 0, mask = 0; \
  

  for (i = 0; i < vop->data->intr->nintrs; i++) { \

• 	if (vop->data->intr->intrs[i] & type) \
  

• 	if (vop->data->intr->intrs[i] & type) { \
  	reg |= (v) << i; \
  

• 		mask |= 1 << i; \
  

• 	} \
  

  } \

• VOP_INTR_SET(vop, name, reg); \
  

• VOP_INTR_SET(vop, name, mask, reg); \
  

  } while (0) #define VOP_INTR_GET_TYPE(vop, name, type) \ vop_get_intr_type(vop, &vop->data->intr->name, type)

Hi John

Great, it works for me, Thanks for this fix.

Applied to my drm-next branch.

-- Ｍark Yao