Hi,

After installing Linux 5.8-rc7 I seem to get no video output on my NV36 card once the nouveau module is loaded. The display (connected to the digital output) simply reports "No Signal".

I bisected to the following commit, and reverting this commit on top of 5.8-rc7 appears to correct the issue.

fa4f4c213f5f7807360c41f2501a3031a9940f3a is the first bad commit commit fa4f4c213f5f7807360c41f2501a3031a9940f3a Author: James Jones jajones@nvidia.com Date: Mon Feb 10 15:15:55 2020 -0800

drm/nouveau/kms: Support NVIDIA format modifiers

Allow setting the block layout of a nouveau FB object using DRM format modifiers. When specified, the format modifier block layout and kind overrides the GEM buffer's implicit layout and kind. The specified format modifier is validated against the list of modifiers supported by the target display hardware.

v2: Used Tesla family instead of NV50 chipset compare v4: Do not cache kind, tile_mode in nouveau_framebuffer v5: Resolved against nouveau_framebuffer cleanup

Signed-off-by: James Jones jajones@nvidia.com Signed-off-by: Ben Skeggs bskeggs@redhat.com

drivers/gpu/drm/nouveau/dispnv50/wndw.c | 20 ++++--- drivers/gpu/drm/nouveau/nouveau_display.c | 89 ++++++++++++++++++++++++++++++- drivers/gpu/drm/nouveau/nouveau_display.h | 4 ++ 3 files changed, 104 insertions(+), 9 deletions(-)

The dmesg output from loading the driver is identical except several lines are missing in the non-working case, which I have marked with "XXX" below:

[ 168.222926] PCI Interrupt Link [LNKE] enabled at IRQ 16 [ 168.223199] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 168.224379] Console: switching to colour dummy device 80x25 [ 168.224612] nouveau 0000:01:00.0: NVIDIA NV36 (436200a1) [ 168.324779] nouveau 0000:01:00.0: bios: version 04.36.20.21.00 [ 168.325646] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 168.325657] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [ 168.325662] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 168.325679] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 168.325908] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 168.325914] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [ 168.325918] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 168.325933] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 168.325990] nouveau 0000:01:00.0: tmr: unknown input clock freq [ 168.326732] nouveau 0000:01:00.0: fb: 256 MiB DDR1 [ 168.328174] [TTM] Zone kernel: Available graphics memory: 1022540 KiB [ 168.328175] [TTM] Initializing pool allocator [ 168.328181] [TTM] Initializing DMA pool allocator [ 168.328200] nouveau 0000:01:00.0: DRM: VRAM: 255 MiB [ 168.328201] nouveau 0000:01:00.0: DRM: GART: 128 MiB [ 168.328204] nouveau 0000:01:00.0: DRM: BMP version 5.40 [ 168.328208] nouveau 0000:01:00.0: DRM: DCB version 2.2 [ 168.328210] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00009c40 [ 168.328214] nouveau 0000:01:00.0: DRM: DCB outp 01: 02010310 00009c40 [ 168.328215] nouveau 0000:01:00.0: DRM: DCB outp 02: 04000302 00000000 [ 168.328217] nouveau 0000:01:00.0: DRM: DCB outp 03: 02020321 00000303 [ 168.328495] nouveau 0000:01:00.0: DRM: Loading NV17 power sequencing microcode [ 168.329691] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 168.330258] nouveau 0000:01:00.0: DRM: Saving VGA fonts [ 168.389460] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 168.391250] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3) XXX [ 168.487647] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x9000, bo 00000000ff426de1 XXX [ 168.491835] fbcon: nouveaudrmfb (fb0) is primary device XXX [ 168.608512] nouveau 0000:01:00.0: DRM: 0xE4FB: Parsing digital output script table XXX [ 168.662451] Console: switching to colour frame buffer device 240x67 XXX [ 168.755987] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device [ 168.763736] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0

Let me know if you need any more info.

Cheers, Nick