The driver already has support for sm8150/sm8250, but the compatibles were never added.

Also inverse the non-mdp4 condition in add_display_components() to avoid having to check every new compatible in the condition.

Signed-off-by: Jonathan Marek jonathan@marek.ca --- Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++-- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++ drivers/gpu/drm/msm/msm_drv.c | 6 +++--- 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index 551ae26f60da..5763f43200a0 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.

MDSS: Required properties: -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss" - reg: physical base address and length of contoller's registers. - reg-names: register region names. The following region is required: * "mdss" @@ -41,7 +41,7 @@ Optional properties:

MDP: Required properties: -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu" - reg: physical base address and length of controller's registers. - reg-names : register region names. The following region is required: * "mdp" diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 5a8e3e1fc48c..fff12a4c8bfc 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = { static const struct of_device_id dpu_dt_match[] = { { .compatible = "qcom,sdm845-dpu", }, { .compatible = "qcom,sc7180-dpu", }, + { .compatible = "qcom,sm8150-dpu", }, + { .compatible = "qcom,sm8250-dpu", }, {} }; MODULE_DEVICE_TABLE(of, dpu_dt_match); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 94525ac76d4e..928f13d4bfbc 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev, * Populate the children devices, find the MDP5/DPU node, and then add * the interfaces to our components list. */ - if (of_device_is_compatible(dev->of_node, "qcom,mdss") || - of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") || - of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) { + if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) { ret = of_platform_populate(dev->of_node, NULL, NULL, dev); if (ret) { DRM_DEV_ERROR(dev, "failed to populate children devices\n"); @@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = { { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 }, { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, + { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, + { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, {} }; MODULE_DEVICE_TABLE(of, dt_match);