This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT LCD panel, which can be supported by the simple panel driver.

Acked-by: Rob Herring robh@kernel.org Signed-off-by: Richard Genoud richard.genoud@gmail.com ---

Changes since v2: Remove status, reg and unit-addresses from example

Changes since v1: Add power-supply property and an example in documentation

.../bindings/display/panel/winstar,wf35ltiacd | 48 ++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 28 +++++++++++++ 2 files changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd

diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd new file mode 100644 index 000000000000..2a7e6e3ba64c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd @@ -0,0 +1,48 @@ +Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel + +Required properties: +- compatible: should be "winstar,wf35ltiacd" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Example: + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <191>; + power-supply = <&bl_reg>; + }; + + bl_reg: backlight_regulator { + compatible = "regulator-fixed"; + regulator-name = "backlight-power-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + panel: panel { + compatible = "winstar,wf35ltiacd", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint { + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + panel_reg: panel_regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 06aaf79de8c8..5d45664c6c0e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1713,6 +1713,31 @@ static const struct panel_desc urt_umsh_8596md_parallel = { .bus_format = MEDIA_BUS_FMT_RGB666_1X18, };

+static const struct drm_display_mode winstar_wf35ltiacd_mode = { + .clock = 6410, + .hdisplay = 320, + .hsync_start = 320 + 20, + .hsync_end = 320 + 20 + 30, + .htotal = 320 + 20 + 30 + 38, + .vdisplay = 240, + .vsync_start = 240 + 4, + .vsync_end = 240 + 4 + 3, + .vtotal = 240 + 4 + 3 + 15, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static const struct panel_desc winstar_wf35ltiacd = { + .modes = &winstar_wf35ltiacd_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 70, + .height = 53, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, +}; + static const struct of_device_id platform_of_match[] = { { .compatible = "ampire,am800480r3tmqwa1h", @@ -1892,6 +1917,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "urt,umsh-8596md-20t", .data = &urt_umsh_8596md_parallel, }, { + .compatible = "winstar,wf35ltiacd", + .data = &winstar_wf35ltiacd, + }, { /* sentinel */ } };