Add UBWC global configuration for display on SC7180 target.

Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 58 +++++++++++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 29705e7..80d3cfc 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -12,6 +12,7 @@

#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)

+#define HW_REV 0x0 #define HW_INTR_STATUS 0x0010

/* Max BW defined in KBps */ @@ -22,6 +23,17 @@ struct dpu_irq_controller { struct irq_domain *domain; };

+struct dpu_hw_cfg { + u32 val; + u32 offset; +}; + +struct dpu_mdss_hw_init_handler { + u32 hw_rev; + u32 hw_reg_count; + struct dpu_hw_cfg* hw_cfg; +}; + struct dpu_mdss { struct msm_mdss base; void __iomem *mmio; @@ -32,6 +44,44 @@ struct dpu_mdss { u32 num_paths; };

+static struct dpu_hw_cfg hw_cfg[] = { + { + /* UBWC global settings */ + .val = 0x1E, + .offset = 0x144, + } +}; + +static struct dpu_mdss_hw_init_handler cfg_handler[] = { + { .hw_rev = DPU_HW_VER_620, + .hw_reg_count = ARRAY_SIZE(hw_cfg), + .hw_cfg = hw_cfg + }, +}; + +static void dpu_mdss_hw_init(struct dpu_mdss *dpu_mdss, u32 hw_rev) +{ + int i; + u32 count = 0; + struct dpu_hw_cfg *hw_cfg = NULL; + + for (i = 0; i < ARRAY_SIZE(cfg_handler); i++) { + if (cfg_handler[i].hw_rev == hw_rev) { + hw_cfg = cfg_handler[i].hw_cfg; + count = cfg_handler[i].hw_reg_count; + break; + } + } + + for (i = 0; i < count; i++ ) { + writel_relaxed(hw_cfg->val, + dpu_mdss->mmio + hw_cfg->offset); + hw_cfg++; + } + + return; +} + static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev, struct dpu_mdss *dpu_mdss) { @@ -174,12 +224,18 @@ static int dpu_mdss_enable(struct msm_mdss *mdss) struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss); struct dss_module_power *mp = &dpu_mdss->mp; int ret; + u32 mdss_rev;

dpu_mdss_icc_request_bw(mdss);

ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); - if (ret) + if (ret) { DPU_ERROR("clock enable failed, ret:%d\n", ret); + return ret; + } + + mdss_rev = readl_relaxed(dpu_mdss->mmio + HW_REV); + dpu_mdss_hw_init(dpu_mdss, mdss_rev);

return ret; }