https://bugzilla.kernel.org/show_bug.cgi?id=199749
Bug ID: 199749 Summary: amdgpu on Ryzen 2400G freeze randomly Product: Drivers Version: 2.5 Kernel Version: 4.17 RC2 Hardware: All OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Video(DRI - non Intel) Assignee: drivers_video-dri@kernel-bugs.osdl.org Reporter: muelladdi@gmail.com Regression: No
System video freezes randomly during the day while working on the system normally (no 3D). Logfile shows only:
May 17 11:18:00 ws01 kernel: [11831.268044] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, last signaled seq=2081253, last emitted seq=2081256 May 17 11:18:00 ws01 kernel: [11831.268051] [drm] No hardware hang detected. Did some blocks stall?
If I can assist any further, please tell.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
Andrey Grodzovsky (andrey.grodzovsky@amd.com) changed:
What |Removed |Added ---------------------------------------------------------------------------- CC| |andrey.grodzovsky@amd.com
--- Comment #1 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- Can you load kernel with grub command line amdgpu.vm_update_mode=3 to force CPU VM update mode and see if this makes the issue go away ?
Andrey
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #2 from muelladdi@gmail.com --- Added the grub cmdline and will investigate
https://bugzilla.kernel.org/show_bug.cgi?id=199749
notsyncing (song.fc@gmail.com) changed:
What |Removed |Added ---------------------------------------------------------------------------- CC| |song.fc@gmail.com
--- Comment #3 from notsyncing (song.fc@gmail.com) --- Hello, I think I'm experiencing the same problem here. My Ryzen 5 2400G system freezes often, especially under some high cpu and disk activity, even after the "Typical Current Idle" UEFI workaround. Sometimes I could reboot with sysrq, most of the times I need a hard reset. The freezes never leave a message in kernel log until today, after 2 months I built my machine.
6月 16 23:29:00 sfc-DESKTOP kernel: [drm] No hardware hang detected. Did some blocks stall? 6月 16 23:29:00 sfc-DESKTOP kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=1217227, last emitted seq=1217229 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x000000011241a000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112414000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112416000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112410000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112412000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x000000011241f000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112425000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112427000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112429000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00101031 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: at page 0x0000000112421000 from 27 6月 16 23:28:50 sfc-DESKTOP kernel: amdgpu 0000:38:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768)
The HDD led still flashes after this freeze, but in the previous freezes, it won't flash at all.
using kernel 4.17.0-041700-generic on Ubuntu 18.04, mesa 18.1.1-0~b~padoka0. CPU runs at stock 3.6GHz, memory 16G DDR4, running at 2133MHz, no overclocking.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #4 from James Le Cuirot (chewi@gentoo.org) --- Not sure if this is related to bug #199653, which concerns freezing on the 2500U and 2700U. It hasn't received any attention from AMD or other kernels devs but there is more information that could potentially be useful. I tried amdgpu.vm_update_mode=3 but that didn't help.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #5 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- Those two bugs are unrelated.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #6 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- (In reply to James Le Cuirot from comment #4)
Not sure if this is related to bug #199653, which concerns freezing on the 2500U and 2700U. It hasn't received any attention from AMD or other kernels devs but there is more information that could potentially be useful. I tried amdgpu.vm_update_mode=3 but that didn't help.
Are you seeing sdma0 timeout message when the system freezes like muelladi above ? I expect amdgpu.vm_update_mode=3 to help only in that case.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #7 from James Le Cuirot (chewi@gentoo.org) --- (In reply to Andrey Grodzovsky from comment #6)
Are you seeing sdma0 timeout message when the system freezes like muelladi above ? I expect amdgpu.vm_update_mode=3 to help only in that case.
I haven't been able to get any information as I have been unable to access the system following these freezes. Judging by the output from the other reporter, they do indeed seem unrelated. Sorry for the noise but some attention on that issue would be hugely appreciated. It's so bad, I've considered selling the laptop.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #8 from notsyncing (song.fc@gmail.com) --- Today I tried the amdgpu.vm_update_mode=3 option, and my computer still freezed. This time no log was recorded.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #9 from notsyncing (song.fc@gmail.com) --- I found I'm able to reproduce the freeze when I'm compiling two Android ROMs at the same time while browsing or something else. It will freeze in at most 3 hours. I have a 300W PSU, and 2 SSD + 1 HDD storages. Android sources are stored in the HDD. This time I can reboot with sysrq, seems not a PSU fault.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #10 from muelladdi@gmail.com --- So far I have not had any more freezes during normal, non-3D work.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #11 from Michel Dänzer (michel@daenzer.net) --- Other Raven Ridge users have reported that updating to the current microcode files from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/... has fixed stability issues.
Make sure your system BIOS and CPU microcode are up to date as well.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #12 from notsyncing (song.fc@gmail.com) --- I updated to the current microcode files at linux-firmware.git. Today I replicated the same workload, and my computer freezed in just 5 minutes! Even sysrq does not work. I have to do a hard reset.
Still, no log was recorded.
I have an Asrock AB350M-Pro4 motherboard, with latest UEFI version L4.82.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #13 from Michel Dänzer (michel@daenzer.net) --- (In reply to notsyncing from comment #12)
I updated to the current microcode files at linux-firmware.git.
Did you update the microcode files in the initrd as well?
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #15 from notsyncing (song.fc@gmail.com) --- Still freezed under two Android source compilation + 2 intellij idea + 10 firefox tabs + EVE online playing after 3 hours. Sysrq does not work, need hard reset. No log was recorded.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #16 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- What kernel version are you using ?
We can try and figure out what was the last commands in HW before you experienced the page fault.
You can clone and install our register analyzer from here - https://cgit.freedesktop.org/amd/umr/
Then launch your X with ENV variable GALLIUM_DDEBUG=always to dump all the 3D commands into files in ~/ddebug_dumps/
Run your workload.
After you again experience the GPU page fault please provide the following outputs
sudo umr -lb sudo umr -O verbose,follow_ib -R gfx[.] sudo umr -O bits -wa sudo umr -O many,bits -r*.*.mmGRBM_STATUS sudo umr -O many,bits -r *.*.HEADER_DUMP sudo umr -O many,bits -r *.*.CP_EOP
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #17 from notsyncing (song.fc@gmail.com) --- (In reply to Andrey Grodzovsky from comment #16)
Then launch your X with ENV variable GALLIUM_DDEBUG=always to dump all the 3D commands into files in ~/ddebug_dumps/
Would you mind telling me how to add this variable? I googled and cannot find any information. Should I add it to /etc/X11/Xsession or something else? Thanks very much!
I'm on kernel 4.17.2-041702-generic, Ubuntu 18.04, mesa 18.1.1-1ubuntu1~18.04.0~ppa1
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #18 from notsyncing (song.fc@gmail.com) --- BTW, I'm using KDE plasma 5.13 with sddm.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #19 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- (In reply to notsyncing from comment #18)
BTW, I'm using KDE plasma 5.13 with sddm.
You just prepend this before command to start your graphic stack. You need to manually run your graphic stack from command line and add this before. E.G. for me on Ubuntu I will disable graphics launch on boot from GRUB. Then from terminal I will run GALLIUM_DDEBUG=always service lightdm start
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #20 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- (In reply to notsyncing from comment #18)
BTW, I'm using KDE plasma 5.13 with sddm.
You just prepend this before command to start your graphic stack. You need to manually run your graphic stack from command line and add this before. E.G. for me on Ubuntu I will disable graphics launch on boot from GRUB. Then from terminal I will run GALLIUM_DDEBUG=always service lightdm start
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #21 from notsyncing (song.fc@gmail.com) --- (In reply to Andrey Grodzovsky from comment #20)
You just prepend this before command to start your graphic stack. You need to manually run your graphic stack from command line and add this before. E.G. for me on Ubuntu I will disable graphics launch on boot from GRUB. Then from terminal I will run GALLIUM_DDEBUG=always service lightdm start
I compiled and installed umr and executed "GALLIUM_DDEBUG=always service sddm start" on a root tty, and no "ddebug_dumps" directory was found in /root or in my home directory after desktop started. Is that normal?
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #22 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- (In reply to notsyncing from comment #21)
(In reply to Andrey Grodzovsky from comment #20)
You just prepend this before command to start your graphic stack. You need to manually run your graphic stack from command line and add this before. E.G. for me on Ubuntu I will disable graphics launch on boot from GRUB.
Then
from terminal I will run GALLIUM_DDEBUG=always service lightdm start
I compiled and installed umr and executed "GALLIUM_DDEBUG=always service sddm start" on a root tty, and no "ddebug_dumps" directory was found in /root or in my home directory after desktop started. Is that normal?
I checked myself, you need to use this variable with specific graphic application you are running, can you pinpoint what graphic work is going on while you have this faults ?
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #23 from notsyncing (song.fc@gmail.com) --- In fact there is no specified graphic work. I just put an Android source compilation running and go to bed, besides only firefox and dolphin running. The next morning, I found the machine has already freezed. Still no log. The log I posted is just a lucky one.
Would you mind telling me if the umr had some system-wide debugging methods? Or should I make a netconsole to see if there was anything?
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #24 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) ---
(In reply to notsyncing from comment #23)
In fact there is no specified graphic work. I just put an Android source compilation running and go to bed, besides only firefox and dolphin running. The next morning, I found the machine has already freezed. Still no log. The log I posted is just a lucky one.
Would you mind telling me if the umr had some system-wide debugging methods? Or should I make a netconsole to see if there was anything?
UMR is system wide any way, it's memory/registers/HW debugging tool. you can provide the UMR outputs I asked before once the freeze happened assuming you still have SSH access (which seems like you don't).
Since the memory faults you experience are clearly due to some graphic rendering activity maybe you could try to isolate the app which triggers it, repeat what you do but close both firefox and dolphin and check if this still happens. If not try to find which of them was causing this and then we can run it with MESA debug flags.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #25 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- Created attachment 277059 --> https://bugzilla.kernel.org/attachment.cgi?id=277059&action=edit Trace process
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #26 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- Created attachment 277061 --> https://bugzilla.kernel.org/attachment.cgi?id=277061&action=edit Trace process 2
Attached 2 patches if applied to your kernel should tell which process caused the VM_FAULT please also launch your kernel from GRUB with following parameter - amdgpu.vm_fault_stop=2
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #27 from notsyncing (song.fc@gmail.com) --- After 3 days, I managed to reproduce it again with 2 android compilation and firefox with kernel parameter mem=4096m (I have 16GB memory). I found that it's easier to reproduce when the memory is full.
sfc@sfc-DESKTOP:~$ sudo umr -lb raven1.gfx91 raven1.vcn10 raven1.dcn10 raven1.nbio70 raven1.sdma041 raven1.hdp40 raven1.oss40 raven1.mmhub91 raven1.mp100 sfc@sfc-DESKTOP:~$ sudo umr -O verbose,follow_ib -R gfx[.] error: Unknown option [follow_ib] sfc@sfc-DESKTOP:~$ sudo umr -O bits -wa No active waves! sfc@sfc-DESKTOP:~$ sudo umr -O many,bits -r*.*.mmGRBM_STATUS [ERROR]: Unknown option <-r*.*.mmGRBM_STATUS> sfc@sfc-DESKTOP:~$ sudo umr -O many,bits -r *.*.HEADER_DUMP gfx91.mmCP_MEC_ME1_HEADER_DUMP => 0xc0000e00 .HEADER_DUMP[0:31] == 3221229056 (0xc0000e00) gfx91.mmCP_MEC_ME2_HEADER_DUMP => 0xdef0def0 .HEADER_DUMP[0:31] == 3740327664 (0xdef0def0) gfx91.mmCP_ME_HEADER_DUMP => 0xc0004200 .ME_HEADER_DUMP[0:31] == 3221242368 (0xc0004200) gfx91.mmCP_PFP_HEADER_DUMP => 0xffff1000 .PFP_HEADER_DUMP[0:31] == 4294905856 (0xffff1000) gfx91.mmCP_CE_HEADER_DUMP => 0xffff1000 .CE_HEADER_DUMP[0:31] == 4294905856 (0xffff1000) sfc@sfc-DESKTOP:~$ sudo umr -O many,bits -r *.*.CP_EOP gfx91.mmCP_EOPQ_WAIT_TIME => 0x0000052c .WAIT_TIME[0:9] == 300 (0x0000012c) .SCALE_COUNT[10:17] == 1 (0x00000001) gfx91.mmCP_EOP_DONE_ADDR_LO => 0x00609000 .ADDR_LO[2:31] == 1582080 (0x00182400) gfx91.mmCP_EOP_DONE_ADDR_HI => 0x000000f5 .ADDR_HI[0:15] == 245 (0x000000f5) gfx91.mmCP_EOP_DONE_DATA_LO => 0x000008e4 .DATA_LO[0:31] == 2276 (0x000008e4) gfx91.mmCP_EOP_DONE_DATA_HI => 0x00000000 .DATA_HI[0:31] == 0 (0x00000000) gfx91.mmCP_EOP_LAST_FENCE_LO => 0x000008e4 .LAST_FENCE_LO[0:31] == 2276 (0x000008e4) gfx91.mmCP_EOP_LAST_FENCE_HI => 0x00000000 .LAST_FENCE_HI[0:31] == 0 (0x00000000) gfx91.mmCP_EOP_DONE_EVENT_CNTL => 0x00038060 .WBINV_TC_OP[0:6] == 96 (0x00000060) .WBINV_ACTION_ENA[12:17] == 56 (0x00000038) .CACHE_POLICY[25:25] == 0 (0x00000000) .EXECUTE[28:28] == 0 (0x00000000) gfx91.mmCP_EOP_DONE_DATA_CNTL => 0x40010000 .DST_SEL[16:17] == 1 (0x00000001) .INT_SEL[24:26] == 0 (0x00000000) .DATA_SEL[29:31] == 2 (0x00000002) gfx91.mmCP_EOP_DONE_CNTX_ID => 0x00000000 .CNTX_ID[0:31] == 0 (0x00000000)
ddebug_dumps:
--- Command: /usr/lib/firefox/firefox Driver vendor: X.Org Device vendor: AMD Device name: AMD RAVEN (DRM 3.25.0, 4.17.2-041702-generic, LLVM 6.0.0)
Remainder of driver log: ---
I tried netconsole and could not get it working. I bought a serial converter and it's on the way. When it delivered, I will try getting the log from serial port. Then I could try your patches because currently the logs did not get persisted at all. Thanks for your patches.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #28 from notsyncing (song.fc@gmail.com) --- btw, these umr commands are executed after reboot.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #29 from notsyncing (song.fc@gmail.com) --- I just upgraded to mesa 18.1.3 and kernel 4.17.3. I ran firefox with GALLIUM_DDEBUG after reboot. It produces these after I opened some tabs and firefox stopped responsing.
--- Gallium debugger active. Logging all calls. Hang detection timeout is 1000ms. dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000000 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000001 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000002 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000003 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000004 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000005 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000006 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000007 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000008 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000009 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000010 dd: can't create a directory (13) dd: can't create a directory (13) dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000011 dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000012 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000013 dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000014 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000015 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000016 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000017 dd: can't create a directory (13) dd: failed to open /home/sfc/ddebug_dumps/firefox_5057_00000018 GPU hang detected, collecting information...
Draw # driver prev BOP TOP BOP dump file ------------------------------------------------------------- 8 YES NO NO NO dd: can't create a directory (13) fopen failed
Done. Sandbox: seccomp sandbox violation: pid 5057, tid 5268, syscall 162, args 140631883336544 7 140633020008624 140632174061559 7 140632344285188. dd: Aborting the process... [Parent 4748, Gecko_IOThread] WARNING: pipe error (72): 连接被对方重设: file /build/firefox-m9FtQy/firefox-60.0.2+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353 [Parent 4748, Gecko_IOThread] WARNING: pipe error (113): 连接被对方重设: file /build/firefox-m9FtQy/firefox-60.0.2+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353
###!!! [Parent][MessageChannel] Error: (msgtype=0x15007F,name=PBrowser::Msg_Destroy) Channel error: cannot send/recv
---
The umr commands are:
--- sfc@sfc-DESKTOP:~$ sudo umr -lb raven1.gfx91 raven1.vcn10 raven1.dcn10 raven1.nbio70 raven1.sdma041 raven1.hdp40 raven1.oss40 raven1.mmhub91 raven1.mp100 sfc@sfc-DESKTOP:~$ sudo umr -O verbose,follow_ib -R gfx[.] error: Unknown option [follow_ib] sfc@sfc-DESKTOP:~$ sudo umr -O bits -wa No active waves! sfc@sfc-DESKTOP:~$ sudo umr -O many,bits -r*.*.mmGRBM_STATUS [ERROR]: Unknown option <-r*.*.mmGRBM_STATUS> sfc@sfc-DESKTOP:~$ sudo umr -O many,bits -r *.*.HEADER_DUMP gfx91.mmCP_MEC_ME1_HEADER_DUMP => 0xc0000e00 .HEADER_DUMP[0:31] == 3221229056 (0xc0000e00) gfx91.mmCP_MEC_ME2_HEADER_DUMP => 0xdef0def0 .HEADER_DUMP[0:31] == 3740327664 (0xdef0def0) gfx91.mmCP_ME_HEADER_DUMP => 0xc0004200 .ME_HEADER_DUMP[0:31] == 3221242368 (0xc0004200) gfx91.mmCP_PFP_HEADER_DUMP => 0xffff1000 .PFP_HEADER_DUMP[0:31] == 4294905856 (0xffff1000) gfx91.mmCP_CE_HEADER_DUMP => 0xffff1000 .CE_HEADER_DUMP[0:31] == 4294905856 (0xffff1000) sfc@sfc-DESKTOP:~$ sudo umr -O many,bits -r *.*.CP_EOP gfx91.mmCP_EOPQ_WAIT_TIME => 0x0000052c .WAIT_TIME[0:9] == 300 (0x0000012c) .SCALE_COUNT[10:17] == 1 (0x00000001) gfx91.mmCP_EOP_DONE_ADDR_LO => 0x00609000 .ADDR_LO[2:31] == 1582080 (0x00182400) gfx91.mmCP_EOP_DONE_ADDR_HI => 0x000000f5 .ADDR_HI[0:15] == 245 (0x000000f5) gfx91.mmCP_EOP_DONE_DATA_LO => 0x00001d01 .DATA_LO[0:31] == 7425 (0x00001d01) gfx91.mmCP_EOP_DONE_DATA_HI => 0x00000000 .DATA_HI[0:31] == 0 (0x00000000) gfx91.mmCP_EOP_LAST_FENCE_LO => 0x00001d01 .LAST_FENCE_LO[0:31] == 7425 (0x00001d01) gfx91.mmCP_EOP_LAST_FENCE_HI => 0x00000000 .LAST_FENCE_HI[0:31] == 0 (0x00000000) gfx91.mmCP_EOP_DONE_EVENT_CNTL => 0x00038060 .WBINV_TC_OP[0:6] == 96 (0x00000060) .WBINV_ACTION_ENA[12:17] == 56 (0x00000038) .CACHE_POLICY[25:25] == 0 (0x00000000) .EXECUTE[28:28] == 0 (0x00000000) gfx91.mmCP_EOP_DONE_DATA_CNTL => 0x40010000 .DST_SEL[16:17] == 1 (0x00000001) .INT_SEL[24:26] == 0 (0x00000000) .DATA_SEL[29:31] == 2 (0x00000002) gfx91.mmCP_EOP_DONE_CNTX_ID => 0x00000000 .CNTX_ID[0:31] == 0 (0x00000000) ---
No GPU hang log in dmesg.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #30 from notsyncing (song.fc@gmail.com) --- Created attachment 277101 --> https://bugzilla.kernel.org/attachment.cgi?id=277101&action=edit Kernel log from serial port when it freezes
Finally got logs from serial port when freezed. Seems my problem has nothing to do with amdgpu. Maybe I should file a new bug.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #31 from James Le Cuirot (chewi@gentoo.org) --- (In reply to notsyncing from comment #30)
Finally got logs from serial port when freezed. Seems my problem has nothing to do with amdgpu. Maybe I should file a new bug.
I may be off the mark but that looks more like bug #196683. Have you tried adjusting "Power Supply Idle Control" in the BIOS (if you have it) or using zenstates.py to disable the C6 package state?
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #32 from notsyncing (song.fc@gmail.com) --- I've set that option to "Typical Current Idle" and still freezes. The logs in 196683 points to RCU, which seems not my case. I suspect it's due to the zram. Now I'm trying to reproduce it with zram disabled.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #33 from notsyncing (song.fc@gmail.com) --- Now about half a month passed, and my machine is running fine with zram disabled. No more freezes. Seems my problem is related to zram, not this bug, while the "ring gfx timeout" error never happened again. Thanks for everyone who gave me advice.
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #34 from Andrey Grodzovsky (andrey.grodzovsky@amd.com) --- notsyncing, can you close this ticket then ?
https://bugzilla.kernel.org/show_bug.cgi?id=199749
--- Comment #35 from notsyncing (song.fc@gmail.com) --- (In reply to Andrey Grodzovsky from comment #34)
notsyncing, can you close this ticket then ?
This is not my ticket.
dri-devel@lists.freedesktop.org
-
bugzilla-daemon＠bugzilla.kernel.org