From: Alex Deucher alexander.deucher@amd.com

DVOOutputControl checks the value of of bios scratch reg 3 on some tables and assumes the encoder is already enabled if the DFP2_ACTIVE bit is set. Clear that bit so the table sets the DDIA enable bit properly.

Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@kernel.org --- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 9c1fdb2..2554fe3 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1505,7 +1505,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: args.ucAction = ATOM_ENABLE; - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + /* workaround for DVOOutputControl on some RS690 systems */ + if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) { + u32 reg = RREG32(RADEON_BIOS_3_SCRATCH); + WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + WREG32(RADEON_BIOS_3_SCRATCH, reg); + } else + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { args.ucAction = ATOM_LCD_BLON; atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);