The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel.

Signed-off-by: Peter Rosin peda@axentia.se --- .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt new file mode 100644 index 000000000000..0f57c3143506 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt @@ -0,0 +1,36 @@ +Sharp 15" LQ150X1LG11 XGA TFT LCD panel + +Required properties: +- compatible: should be "sharp,lq150x1lg11" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +Optional properties: +- backlight: phandle of the backlight device +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. +- sellvds-gpios: a single GPIO for the SELLVDS pin. + +If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS +pins are assumed to be handled appropriately by the hardware. + +Example: + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 100000>; /* VBR */ + + brightness-levels = <0 20 40 60 80 100>; + default-brightness-level = <2>; + + power-supply = <&vdd_12v_reg>; /* VDD */ + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ + }; + + panel { + compatible = "sharp,lq150x1lg11"; + + power-supply = <&vcc_3v3_reg>; /* VCC */ + + backlight = <&backlight>; + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ + sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ + };

From: Gustaf Lindström gl@axentia.se

The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel.

The simple-panel driver is used to get support for essential functionality of the panel.

Signed-off-by: Gustaf Lindström gl@axentia.se Signed-off-by: Peter Rosin peda@axentia.se --- drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 113db3c4a633..76f0ef7e5b7c 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1420,6 +1420,30 @@ static const struct panel_desc sharp_lq123p1jx31 = { }, };

+static const struct drm_display_mode sharp_lq150x1lg11_mode = { + .clock = 71100, + .hdisplay = 1024, + .hsync_start = 1024 + 168, + .hsync_end = 1024 + 168 + 64, + .htotal = 1024 + 168 + 64 + 88, + .vdisplay = 768, + .vsync_start = 768 + 37, + .vsync_end = 768 + 37 + 2, + .vtotal = 768 + 37 + 2 + 8, + .vrefresh = 60, +}; + +static const struct panel_desc sharp_lq150x1lg11 = { + .modes = &sharp_lq150x1lg11_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 304, + .height = 228, + }, + .bus_format = MEDIA_BUS_FMT_RGB565_1X16, +}; + static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { .clock = 33300, .hdisplay = 800, @@ -1683,6 +1707,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "sharp,lq123p1jx31", .data = &sharp_lq123p1jx31, }, { + .compatible = "sharp,lq150x1lg11", + .data = &sharp_lq150x1lg11, + }, { .compatible = "shelly,sca07010-bfn-lnn", .data = &shelly_sca07010_bfn_lnn, }, {