Changes since the first version of the series: - Dropped: "drm/tilcdc: disable console switching during pm operations" - Changed: "drm/tilcdc: Allocate register storage based on the actual number.." - Reversed kcalloc() nmemb and size parameters to correct order - Addeed: "drm/tilcdc: Initialize crtc->port"
We have not been too active in pushing the tilcdc fixes to mainline. This series tries to bring the mainline tilcdc upto same level with TI ti-linux tree.
Some patches that touch the same place over and over again have been squashed into one, leaving author of the last rewrite on top.
Best regards, Jyri
Darren Etheridge (4): drm/tilcdc: rewrite pixel clock calculation drm/tilcdc: fix kernel panic on suspend when no hdmi monitor connected drm/tilcdc: make frame_done interrupt active at all times drm/tilcdc: disable the lcd controller/dma engine when suspend invoked
Dave Gerlach (1): drm/tilcdc: adopt pinctrl support
Grygorii Strashko (1): drm/tilcdc: fix build error when !CONFIG_CPU_FREQ
Jyri Sarha (7): drm/tilcdc: Implement dma-buf support for tilcdc drm/tilcdc: Allocate register storage based on the actual number registers drm/tilcdc: Fix interrupt enable/disable code for version 2 tilcdc drm/tilcdc: Remove the duplicate LCDC_INT_ENABLE_SET_REG in registers[] drm/tilcdc: Add prints on sync lost and FIFO underrun interrupts drm/tilcdc: Disable sync lost interrupt if it fires on every frame drm/tilcdc: Initialize crtc->port
Tomi Valkeinen (8): drm/tilcdc: verify fb pitch drm/tilcdc: cleanup runtime PM handling drm/tilcdc: disable crtc on unload drm/tilcdc: split reset to a separate function drm/tilcdc: remove broken error handling drm/tilcdc: cleanup irq handling drm/tilcdc: Get rid of complex ping-pong mechanism drm/tilcdc: Do not update the next frame buffer close to vertical blank
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 303 +++++++++++++++++++++++------------ drivers/gpu/drm/tilcdc/tilcdc_drv.c | 123 ++++++++------ drivers/gpu/drm/tilcdc/tilcdc_drv.h | 5 +- 3 files changed, 277 insertions(+), 154 deletions(-)
From: Darren Etheridge detheridge@ti.com
Updating the tilcdc DRM driver code to calculate the LCD controller pixel clock more accurately. Based on a suggested implementation by Tomi Valkeinen.
The current code does not work correctly and produces wrong results with many requested clock rates. It also oddly uses two different clocks, a display pll clock and a divider clock (child of display pll), instead of just using the clock coming to the lcdc.
This patch removes the use of the display pll clock, and rewrites the code to calculate the clock rates. The idea is simply to request a clock rate of pixelclock*2, as the LCD controller has an internal divider which we set to 2.
Signed-off-by: Darren Etheridge detheridge@ti.com [Rewrapped description] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 16 ++++++++-------- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 11 +---------- drivers/gpu/drm/tilcdc/tilcdc_drv.h | 1 - 3 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 7d07733..7b687ae 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -573,7 +573,8 @@ void tilcdc_crtc_update_clk(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private; int dpms = tilcdc_crtc->dpms; - unsigned int lcd_clk, div; + unsigned long lcd_clk; + const unsigned clkdiv = 2; /* using a fixed divider of 2 */ int ret;
pm_runtime_get_sync(dev->dev); @@ -581,22 +582,21 @@ void tilcdc_crtc_update_clk(struct drm_crtc *crtc) if (dpms == DRM_MODE_DPMS_ON) tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
- /* in raster mode, minimum divisor is 2: */ - ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2); - if (ret) { + /* mode.clock is in KHz, set_rate wants parameter in Hz */ + ret = clk_set_rate(priv->clk, crtc->mode.clock * 1000 * clkdiv); + if (ret < 0) { dev_err(dev->dev, "failed to set display clock rate to: %d\n", crtc->mode.clock); goto out; }
lcd_clk = clk_get_rate(priv->clk); - div = lcd_clk / (crtc->mode.clock * 1000);
- DBG("lcd_clk=%u, mode clock=%d, div=%u", lcd_clk, crtc->mode.clock, div); - DBG("fck=%lu, dpll_disp_ck=%lu", clk_get_rate(priv->clk), clk_get_rate(priv->disp_clk)); + DBG("lcd_clk=%lu, mode clock=%d, div=%u", + lcd_clk, crtc->mode.clock, clkdiv);
/* Configure the LCD clock divisor. */ - tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) | + tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) | LCDC_RASTER_MODE);
if (priv->rev == 2) diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index d7f5b89..4d75ee3 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -192,13 +192,6 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) goto fail_iounmap; }
- priv->disp_clk = clk_get(dev->dev, "dpll_disp_ck"); - if (IS_ERR(priv->clk)) { - dev_err(dev->dev, "failed to get display clock\n"); - ret = -ENODEV; - goto fail_put_clk; - } - #ifdef CONFIG_CPU_FREQ priv->lcd_fck_rate = clk_get_rate(priv->clk); priv->freq_transition.notifier_call = cpufreq_transition; @@ -206,7 +199,7 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) CPUFREQ_TRANSITION_NOTIFIER); if (ret) { dev_err(dev->dev, "failed to register cpufreq notifier\n"); - goto fail_put_disp_clk; + goto fail_put_clk; } #endif
@@ -330,8 +323,6 @@ fail_cpufreq_unregister: #ifdef CONFIG_CPU_FREQ cpufreq_unregister_notifier(&priv->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); -fail_put_disp_clk: - clk_put(priv->disp_clk); #endif
fail_put_clk: diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h index e863ad0..c00f518 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -49,7 +49,6 @@ struct tilcdc_drm_private { void __iomem *mmio;
- struct clk *disp_clk; /* display dpll */ struct clk *clk; /* functional clock */ int rev; /* IP revision */
From: Tomi Valkeinen tomi.valkeinen@ti.com
LCDC hardware does not support fb pitch that is different (i.e. larger) than the screen size. The driver currently does no checks for this, and the results of too big pitch are are flickering and lower fps.
This issue easily happens when using libdrm's modetest tool with non-32 bpp modes. As modetest always allocated 4 bytes per pixel, it implies a bigger pitch for 16 or 24 bpp modes.
This patch adds a check to reject pitches the hardware cannot support.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Darren Etheridge detheridge@ti.com Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 7b687ae..105f286 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -151,6 +151,22 @@ static void tilcdc_crtc_destroy(struct drm_crtc *crtc) kfree(tilcdc_crtc); }
+static int tilcdc_verify_fb(struct drm_crtc *crtc, struct drm_framebuffer *fb) +{ + struct drm_device *dev = crtc->dev; + unsigned int depth, bpp; + + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); + + if (fb->pitches[0] != crtc->mode.hdisplay * bpp / 8) { + dev_err(dev->dev, + "Invalid pitch: fb and crtc widths must be the same"); + return -EINVAL; + } + + return 0; +} + static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, @@ -158,6 +174,11 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; + int r; + + r = tilcdc_verify_fb(crtc, fb); + if (r) + return r;
if (tilcdc_crtc->event) { dev_err(dev->dev, "already pending page flip!\n"); @@ -272,6 +293,10 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, if (WARN_ON(!info)) return -EINVAL;
+ ret = tilcdc_verify_fb(crtc, crtc->primary->fb); + if (ret) + return ret; + pm_runtime_get_sync(dev->dev);
/* Configure the Burst Size and fifo threshold of DMA: */ @@ -431,6 +456,12 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { + int r; + + r = tilcdc_verify_fb(crtc, crtc->primary->fb); + if (r) + return r; + update_scanout(crtc); return 0; }
From: Dave Gerlach d-gerlach@ti.com
Update tilcdc driver to set the state of the pins to: - "default on resume - "sleep" on suspend
By optionally putting the pins into sleep state in the suspend callback we can accomplish two things. - minimize current leakage from pins and thus save power, - prevent the IP from driving pins output in an uncontrolled manner, which may happen if the power domain drops the domain regulator.
Signed-off-by: Dave Gerlach d-gerlach@ti.com Signed-off-by: Darren Etheridge detheridge@ti.com Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 4d75ee3..64f1de2 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -18,6 +18,8 @@ /* LCDC DRM driver, based on da8xx-fb */
#include <linux/component.h> +#include <linux/pinctrl/consumer.h> +#include <linux/suspend.h>
#include "tilcdc_drv.h" #include "tilcdc_regs.h" @@ -593,6 +595,9 @@ static int tilcdc_pm_suspend(struct device *dev) if (registers[i].save && (priv->rev >= registers[i].rev)) priv->saved_register[n++] = tilcdc_read(ddev, registers[i].reg);
+ /* Select sleep pin state */ + pinctrl_pm_select_sleep_state(dev); + return 0; }
@@ -602,6 +607,9 @@ static int tilcdc_pm_resume(struct device *dev) struct tilcdc_drm_private *priv = ddev->dev_private; unsigned i, n = 0;
+ /* Select default pin state */ + pinctrl_pm_select_default_state(dev); + /* Restore register state: */ for (i = 0; i < ARRAY_SIZE(registers); i++) if (registers[i].save && (priv->rev >= registers[i].rev))
From: Darren Etheridge detheridge@ti.com
On BeagleBone Black if no HDMI monitor is connected and suspend is requested a kernel panic will result:
root@am335x-evm:~# echo mem > /sys/power/state [ 65.548710] PM: Syncing filesystems ... done. [ 65.631311] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 65.648619] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 65.833500] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e004 [ 65.841692] Internal error: : 1028 [#1] SMP ARM <snip> [ 66.105287] [<c03765f0>] (platform_pm_suspend) from [<c037b6d4>] (dpm_run_callback+0x34/0x70) [ 66.114370] [<c037b6d4>] (dpm_run_callback) from [<c037ba84>] (__device_suspend+0x10c/0x2f4) [ 66.123357] [<c037ba84>] (__device_suspend) from [<c037d004>] (dpm_suspend+0x58/0x218) [ 66.131796] [<c037d004>] (dpm_suspend) from [<c008d948>] (suspend_devices_and_enter+0x9c/0x3c0) [ 66.141055] [<c008d948>] (suspend_devices_and_enter) from [<c008de7c>] (pm_suspend+0x210/0x24c) [ 66.150312] [<c008de7c>] (pm_suspend) from [<c008cabc>] (state_store+0x68/0xb8) [ 66.158103] [<c008cabc>] (state_store) from [<c02e9654>] (kobj_attr_store+0x14/0x20) [ 66.166355] [<c02e9654>] (kobj_attr_store) from [<c0185c70>] (sysfs_kf_write+0x4c/0x50) [ 66.174883] [<c0185c70>] (sysfs_kf_write) from [<c018926c>] (kernfs_fop_write+0xb4/0x150) [ 66.183598] [<c018926c>] (kernfs_fop_write) from [<c0122638>] (vfs_write+0xa8/0x180) [ 66.191846] [<c0122638>] (vfs_write) from [<c01229f8>] (SyS_write+0x40/0x8c) [ 66.199365] [<c01229f8>] (SyS_write) from [<c000e580>] (ret_fast_syscall+0x0/0x48) [ 66.207426] Code: e595c210 e5932000 e59cc000 e08c2002 (e592c000)
This is because the lcdc module is not enabled when no monitor is detected to save power. However the suspend handler just blindly tries to save the lcdc state by copying out the pertinent registers. However module is off so no good things happen when you try and access it.
This patch only saves off the registers if the module is enabled, and then only restores the registers on resume if they were saved off during suspend.
Signed-off-by: Darren Etheridge detheridge@ti.com Tested-by: Dave Gerlach d-gerlach@ti.com Acked-by: Felipe Balbi balbi@ti.com Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 23 +++++++++++++++++------ drivers/gpu/drm/tilcdc/tilcdc_drv.h | 1 + 2 files changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 64f1de2..d7b60b4 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -590,13 +590,20 @@ static int tilcdc_pm_suspend(struct device *dev)
drm_kms_helper_poll_disable(ddev);
+ /* Select sleep pin state */ + pinctrl_pm_select_sleep_state(dev); + + if (pm_runtime_suspended(dev)) { + priv->ctx_valid = false; + return 0; + } + /* Save register state: */ for (i = 0; i < ARRAY_SIZE(registers); i++) if (registers[i].save && (priv->rev >= registers[i].rev)) priv->saved_register[n++] = tilcdc_read(ddev, registers[i].reg);
- /* Select sleep pin state */ - pinctrl_pm_select_sleep_state(dev); + priv->ctx_valid = true;
return 0; } @@ -610,10 +617,14 @@ static int tilcdc_pm_resume(struct device *dev) /* Select default pin state */ pinctrl_pm_select_default_state(dev);
- /* Restore register state: */ - for (i = 0; i < ARRAY_SIZE(registers); i++) - if (registers[i].save && (priv->rev >= registers[i].rev)) - tilcdc_write(ddev, registers[i].reg, priv->saved_register[n++]); + if (priv->ctx_valid == true) { + /* Restore register state: */ + for (i = 0; i < ARRAY_SIZE(registers); i++) + if (registers[i].save && + (priv->rev >= registers[i].rev)) + tilcdc_write(ddev, registers[i].reg, + priv->saved_register[n++]); + }
drm_kms_helper_poll_enable(ddev);
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h index c00f518..7d214cc 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -67,6 +67,7 @@ struct tilcdc_drm_private {
/* register contents saved across suspend/resume: */ u32 saved_register[12]; + bool ctx_valid;
#ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition;
From: Darren Etheridge detheridge@ti.com
The frame_done interrupt was only being enabled when the vsync interrupts were being enabled by DRM. However the frame_done is used to determine if the LCD controller has successfully completed the raster_enable, raster_disable commands and the vsync interrupts are not always enabled during these operations.
Signed-off-by: Darren Etheridge detheridge@ti.com Tested-by: Dave Gerlach d-gerlach@ti.com Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index d7b60b4..41720ad 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -376,7 +376,9 @@ static int tilcdc_irq_postinstall(struct drm_device *dev) if (priv->rev == 1) tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_UNDERFLOW_INT_ENA); else - tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA); + tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG, + LCDC_V2_UNDERFLOW_INT_ENA | + LCDC_FRAME_DONE);
return 0; } @@ -410,7 +412,7 @@ static void enable_vblank(struct drm_device *dev, bool enable) } else { reg = LCDC_INT_ENABLE_SET_REG; mask = LCDC_V2_END_OF_FRAME0_INT_ENA | - LCDC_V2_END_OF_FRAME1_INT_ENA | LCDC_FRAME_DONE; + LCDC_V2_END_OF_FRAME1_INT_ENA; }
if (enable)
From: Darren Etheridge detheridge@ti.com
The LCD controller must be deactivated and all DMA transactions stopped when the suspend power state is entered otherwise the PRCM causes the L3 bus to get stuck in transition state.
This commit forces the lcdc to be shut down and waits for all pending DMA transactions to complete as part of the suspend handler for this driver.
Signed-off-by: Darren Etheridge detheridge@ti.com Tested-by: Dave Gerlach d-gerlach@ti.com Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 3 +-- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +++ drivers/gpu/drm/tilcdc/tilcdc_drv.h | 1 + 3 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 105f286..cc45818 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -138,7 +138,6 @@ static void stop(struct drm_crtc *crtc) tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); }
-static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode); static void tilcdc_crtc_destroy(struct drm_crtc *crtc) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); @@ -192,7 +191,7 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, return 0; }
-static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) +void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 41720ad..d2533e26 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -600,6 +600,9 @@ static int tilcdc_pm_suspend(struct device *dev) return 0; }
+ /* Disable the LCDC controller, to avoid locking up the PRCM */ + tilcdc_crtc_dpms(priv->crtc, DRM_MODE_DPMS_OFF); + /* Save register state: */ for (i = 0; i < ARRAY_SIZE(registers); i++) if (registers[i].save && (priv->rev >= registers[i].rev)) diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h index 7d214cc..77c600d 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -172,5 +172,6 @@ void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, bool simulate_vesa_sync); int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode); int tilcdc_crtc_max_width(struct drm_crtc *crtc); +void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode);
#endif /* __TILCDC_DRV_H__ */
There is nothing special about tilcdc HW when the video memory is concerned. Just using the standard drm helpers for implementation is enough.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index d2533e26..4406cbd 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -549,7 +549,8 @@ static const struct file_operations fops = { };
static struct drm_driver tilcdc_driver = { - .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET, + .driver_features = (DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET | + DRIVER_PRIME), .load = tilcdc_load, .unload = tilcdc_unload, .preclose = tilcdc_preclose, @@ -567,6 +568,16 @@ static struct drm_driver tilcdc_driver = { .dumb_create = drm_gem_cma_dumb_create, .dumb_map_offset = drm_gem_cma_dumb_map_offset, .dumb_destroy = drm_gem_dumb_destroy, + + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import = drm_gem_prime_import, + .gem_prime_export = drm_gem_prime_export, + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, + .gem_prime_vmap = drm_gem_cma_prime_vmap, + .gem_prime_vunmap = drm_gem_cma_prime_vunmap, + .gem_prime_mmap = drm_gem_cma_prime_mmap, #ifdef CONFIG_DEBUG_FS .debugfs_init = tilcdc_debugfs_init, .debugfs_cleanup = tilcdc_debugfs_cleanup,
From: Grygorii Strashko Grygorii.Strashko@linaro.org
Fix build error when !CONFIG_CPU_FREQ drivers/gpu/drm/tilcdc/tilcdc_drv.c: In function 'tilcdc_load': drivers/gpu/drm/tilcdc/tilcdc_drv.c:327:1: error: label 'fail_put_clk' defined but not used [-Werror=unused-label] fail_put_clk: ^
Signed-off-by: Grygorii Strashko Grygorii.Strashko@linaro.org Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 4406cbd..893ef18 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -325,9 +325,9 @@ fail_cpufreq_unregister: #ifdef CONFIG_CPU_FREQ cpufreq_unregister_notifier(&priv->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); -#endif
fail_put_clk: +#endif clk_put(priv->clk);
fail_iounmap:
Allocate suspend/resume register storage based on the actual number registers the driver is aware of. The static allocation for register storage had falen behind badly.
Reported-by: Michael Bode michael@bumbleB.de Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 21 ++++++++++++++++++++- drivers/gpu/drm/tilcdc/tilcdc_drv.h | 2 +- 2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 893ef18..ab1789b 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -141,11 +141,14 @@ static int tilcdc_unload(struct drm_device *dev)
pm_runtime_disable(dev->dev);
+ kfree(priv->saved_register); kfree(priv);
return 0; }
+static size_t tilcdc_num_regs(void); + static int tilcdc_load(struct drm_device *dev, unsigned long flags) { struct platform_device *pdev = dev->platformdev; @@ -157,7 +160,12 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { + if (priv) + priv->saved_register = kcalloc(tilcdc_num_regs(), + sizeof(*priv->saved_register), + GFP_KERNEL); + if (!priv || !priv->saved_register) { + kfree(priv); dev_err(dev->dev, "failed to allocate private data\n"); return -ENOMEM; } @@ -339,6 +347,7 @@ fail_free_wq:
fail_free_priv: dev->dev_private = NULL; + kfree(priv->saved_register); kfree(priv); return ret; } @@ -463,6 +472,16 @@ static const struct { REG(2, true, LCDC_INT_ENABLE_SET_REG), #undef REG }; + +static size_t tilcdc_num_regs(void) +{ + return ARRAY_SIZE(registers); +} +#else +static size_t tilcdc_num_regs(void) +{ + return 0; +} #endif
#ifdef CONFIG_DEBUG_FS diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h index 77c600d..80badad 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -66,7 +66,7 @@ struct tilcdc_drm_private { uint32_t max_width;
/* register contents saved across suspend/resume: */ - u32 saved_register[12]; + u32 *saved_register; bool ctx_valid;
#ifdef CONFIG_CPU_FREQ
On 16/02/16 16:18, Jyri Sarha wrote:
Allocate suspend/resume register storage based on the actual number registers the driver is aware of. The static allocation for register storage had falen behind badly.
"fallen"
Reported-by: Michael Bode michael@bumbleB.de Signed-off-by: Jyri Sarha jsarha@ti.com
drivers/gpu/drm/tilcdc/tilcdc_drv.c | 21 ++++++++++++++++++++- drivers/gpu/drm/tilcdc/tilcdc_drv.h | 2 +- 2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 893ef18..ab1789b 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -141,11 +141,14 @@ static int tilcdc_unload(struct drm_device *dev)
pm_runtime_disable(dev->dev);
kfree(priv->saved_register); kfree(priv);
return 0;
}
+static size_t tilcdc_num_regs(void);
static int tilcdc_load(struct drm_device *dev, unsigned long flags) { struct platform_device *pdev = dev->platformdev; @@ -157,7 +160,12 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- if (priv)
priv->saved_register = kcalloc(tilcdc_num_regs(),sizeof(*priv->saved_register),GFP_KERNEL);
devm_kzalloc() would clean this up a bit. For both 'priv' and 'saved_registers'.
Tomi
From: Tomi Valkeinen tomi.valkeinen@ti.com
Cleanup runtime PM handling. Before the patch the usage of pm_runtime calls was inconsistent and hard to follow. After the update the pm_runtime calls are removed from set_scanout() and called around major operations that access the HW. After the patch the DPMS code does not have pm_runtime_forbid/allow calls any more and pm_runtime_irq_safe() is not set anymore.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 19 +++++++++++-------- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 1 - 2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index cc45818..3a6f11e 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -71,7 +71,6 @@ static void set_scanout(struct drm_crtc *crtc, int n) struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private;
- pm_runtime_get_sync(dev->dev); tilcdc_write(dev, base_reg[n], tilcdc_crtc->start); tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end); if (tilcdc_crtc->scanout[n]) { @@ -81,7 +80,6 @@ static void set_scanout(struct drm_crtc *crtc, int n) tilcdc_crtc->scanout[n] = crtc->primary->fb; drm_framebuffer_reference(tilcdc_crtc->scanout[n]); tilcdc_crtc->dirty &= ~stat[n]; - pm_runtime_put_sync(dev->dev); }
static void update_scanout(struct drm_crtc *crtc) @@ -186,8 +184,13 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
crtc->primary->fb = fb; tilcdc_crtc->event = event; + + pm_runtime_get_sync(dev->dev); + update_scanout(crtc);
+ pm_runtime_put_sync(dev->dev); + return 0; }
@@ -206,10 +209,8 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
tilcdc_crtc->dpms = mode;
- pm_runtime_get_sync(dev->dev); - if (mode == DRM_MODE_DPMS_ON) { - pm_runtime_forbid(dev->dev); + pm_runtime_get_sync(dev->dev); start(crtc); } else { tilcdc_crtc->frame_done = false; @@ -227,10 +228,9 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) if (ret == 0) dev_err(dev->dev, "timeout waiting for framedone\n"); } - pm_runtime_allow(dev->dev); - }
- pm_runtime_put_sync(dev->dev); + pm_runtime_put_sync(dev->dev); + } }
static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc, @@ -455,13 +455,16 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { + struct drm_device *dev = crtc->dev; int r;
r = tilcdc_verify_fb(crtc, crtc->primary->fb); if (r) return r;
+ pm_runtime_get_sync(dev->dev); update_scanout(crtc); + pm_runtime_put_sync(dev->dev); return 0; }
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index ab1789b..ecbf0fd 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -230,7 +230,6 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
pm_runtime_enable(dev->dev); - pm_runtime_irq_safe(dev->dev);
/* Determine LCD IP Version */ pm_runtime_get_sync(dev->dev);
From: Tomi Valkeinen tomi.valkeinen@ti.com
Disable crtc on unload. Call tilcdc_crtc_dpms() with DRM_MODE_DPMS_OFF in the beginning of unload function.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index ecbf0fd..ab62aa4 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -112,6 +112,8 @@ static int tilcdc_unload(struct drm_device *dev) { struct tilcdc_drm_private *priv = dev->dev_private;
+ tilcdc_crtc_dpms(priv->crtc, DRM_MODE_DPMS_OFF); + tilcdc_remove_external_encoders(dev);
drm_fbdev_cma_fini(priv->fbdev);
From: Tomi Valkeinen tomi.valkeinen@ti.com
Split reset to a separate function and use usleep_range(250, 1000) instead of msleep(1) to to keep the reset bit on long enough.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch, changed mdelay(500) to usleep_range(250, 1000)] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 3a6f11e..ec7be2c 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -112,17 +112,24 @@ static void update_scanout(struct drm_crtc *crtc) } }
-static void start(struct drm_crtc *crtc) +static void reset(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private;
- if (priv->rev == 2) { - tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); - msleep(1); - tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); - msleep(1); - } + if (priv->rev != 2) + return; + + tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); + usleep_range(250, 1000); + tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); +} + +static void start(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + + reset(crtc);
tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
From: Tomi Valkeinen tomi.valkeinen@ti.com
Remove broken error handling. The condition for handling the LCDC_SYNC_LOST and LCDC_FIFO_UNDERFLOW could never be satisfied as the LCDC_SYNC_LOST interrupt is not enabled. Also the requirement to have both LCDC_SYNC_LOST and LCDC_FIFO_UNDERFLOW fired at once before handling the error looks weird.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index ec7be2c..fe2aed7 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -658,12 +658,7 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) struct tilcdc_drm_private *priv = dev->dev_private; uint32_t stat = tilcdc_read_irqstatus(dev);
- if ((stat & LCDC_SYNC_LOST) && (stat & LCDC_FIFO_UNDERFLOW)) { - stop(crtc); - dev_err(dev->dev, "error: %08x\n", stat); - tilcdc_clear_irqstatus(dev, stat); - start(crtc); - } else if (stat & LCDC_PL_LOAD_DONE) { + if (stat & LCDC_PL_LOAD_DONE) { tilcdc_clear_irqstatus(dev, stat); } else { struct drm_pending_vblank_event *event;
From: Tomi Valkeinen tomi.valkeinen@ti.com
Cleanup irq handling. Clear the irq status unconditionally and restructure the status bit conditions.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index fe2aed7..280c76a 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -656,11 +656,12 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private; - uint32_t stat = tilcdc_read_irqstatus(dev); + uint32_t stat;
- if (stat & LCDC_PL_LOAD_DONE) { - tilcdc_clear_irqstatus(dev, stat); - } else { + stat = tilcdc_read_irqstatus(dev); + tilcdc_clear_irqstatus(dev, stat); + + if ((stat & LCDC_END_OF_FRAME0) || (stat & LCDC_END_OF_FRAME1)) { struct drm_pending_vblank_event *event; unsigned long flags; uint32_t dirty = tilcdc_crtc->dirty & stat;
From: Tomi Valkeinen tomi.valkeinen@ti.com
Get rid of complex ping-pong mechanism and replace it with simpler single buffer flipping code.
The LCDC HW appears to be designed mainly static framebuffers in mind. There are two modes of operation, either static single buffer, or ping pong double buffering with two static buffers switching back and forth. Luckily the framebuffer start address is fetched only in the beginning of the frame and changing the address after that only takes effect after the next vertical blank. The page flipping code can simply write the address of the new framebuffer and the page is flipped automatically after the next vertical blank. Using the ping pong double buffering makes the flipping code way more complex and it does not provide any benefit, so it is better to switch to single buffer operation.
There is still one problem in updating the framebuffer dma address on the fly. There are two registers defining the framebuffer dma area and things may break if the dma address is fetched in while the registers are are being updated.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 122 ++++++++++++++--------------------- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 27 +------- 2 files changed, 53 insertions(+), 96 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 280c76a..7514d40 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -25,15 +25,12 @@ struct tilcdc_crtc { struct drm_crtc base;
const struct tilcdc_panel_info *info; - uint32_t dirty; - dma_addr_t start, end; struct drm_pending_vblank_event *event; int dpms; wait_queue_head_t frame_done_wq; bool frame_done;
- /* fb currently set to scanout 0/1: */ - struct drm_framebuffer *scanout[2]; + struct drm_framebuffer *curr_fb;
/* for deferred fb unref's: */ struct drm_flip_work unref_work; @@ -54,62 +51,31 @@ static void unref_worker(struct drm_flip_work *work, void *val) mutex_unlock(&dev->mode_config.mutex); }
-static void set_scanout(struct drm_crtc *crtc, int n) +static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb) { - static const uint32_t base_reg[] = { - LCDC_DMA_FB_BASE_ADDR_0_REG, - LCDC_DMA_FB_BASE_ADDR_1_REG, - }; - static const uint32_t ceil_reg[] = { - LCDC_DMA_FB_CEILING_ADDR_0_REG, - LCDC_DMA_FB_CEILING_ADDR_1_REG, - }; - static const uint32_t stat[] = { - LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1, - }; struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; - struct tilcdc_drm_private *priv = dev->dev_private; - - tilcdc_write(dev, base_reg[n], tilcdc_crtc->start); - tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end); - if (tilcdc_crtc->scanout[n]) { - drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->scanout[n]); - drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); - } - tilcdc_crtc->scanout[n] = crtc->primary->fb; - drm_framebuffer_reference(tilcdc_crtc->scanout[n]); - tilcdc_crtc->dirty &= ~stat[n]; -} - -static void update_scanout(struct drm_crtc *crtc) -{ - struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct drm_framebuffer *fb = crtc->primary->fb; struct drm_gem_cma_object *gem; unsigned int depth, bpp; + dma_addr_t start, end;
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); gem = drm_fb_cma_get_gem_obj(fb, 0);
- tilcdc_crtc->start = gem->paddr + fb->offsets[0] + - (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8); + start = gem->paddr + fb->offsets[0] + + crtc->y * fb->pitches[0] + + crtc->x * bpp / 8;
- tilcdc_crtc->end = tilcdc_crtc->start + - (crtc->mode.vdisplay * fb->pitches[0]); + end = start + (crtc->mode.vdisplay * fb->pitches[0]);
- if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) { - /* already enabled, so just mark the frames that need - * updating and they will be updated on vblank: - */ - tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1; - drm_vblank_get(dev, 0); - } else { - /* not enabled yet, so update registers immediately: */ - set_scanout(crtc, 0); - set_scanout(crtc, 1); - } + tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, start); + tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, end); + + if (tilcdc_crtc->curr_fb) + drm_flip_work_queue(&tilcdc_crtc->unref_work, + tilcdc_crtc->curr_fb); + + tilcdc_crtc->curr_fb = fb; }
static void reset(struct drm_crtc *crtc) @@ -131,7 +97,7 @@ static void start(struct drm_crtc *crtc)
reset(crtc);
- tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); + tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY)); tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); } @@ -179,6 +145,7 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; int r; + unsigned long flags;
r = tilcdc_verify_fb(crtc, fb); if (r) @@ -189,12 +156,18 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, return -EBUSY; }
+ drm_framebuffer_reference(fb); + crtc->primary->fb = fb; - tilcdc_crtc->event = event;
pm_runtime_get_sync(dev->dev);
- update_scanout(crtc); + + set_scanout(crtc, fb); + + spin_lock_irqsave(&dev->event_lock, flags); + tilcdc_crtc->event = event; + spin_unlock_irqrestore(&dev->event_lock, flags);
pm_runtime_put_sync(dev->dev);
@@ -237,6 +210,14 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) }
pm_runtime_put_sync(dev->dev); + + if (tilcdc_crtc->curr_fb) { + drm_flip_work_queue(&tilcdc_crtc->unref_work, + tilcdc_crtc->curr_fb); + tilcdc_crtc->curr_fb = NULL; + } + + drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); } }
@@ -450,8 +431,10 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, else tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
+ drm_framebuffer_reference(crtc->primary->fb); + + set_scanout(crtc, crtc->primary->fb);
- update_scanout(crtc); tilcdc_crtc_update_clk(crtc);
pm_runtime_put_sync(dev->dev); @@ -469,9 +452,14 @@ static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, if (r) return r;
+ drm_framebuffer_reference(crtc->primary->fb); + pm_runtime_get_sync(dev->dev); - update_scanout(crtc); + + set_scanout(crtc, crtc->primary->fb); + pm_runtime_put_sync(dev->dev); + return 0; }
@@ -661,30 +649,21 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) stat = tilcdc_read_irqstatus(dev); tilcdc_clear_irqstatus(dev, stat);
- if ((stat & LCDC_END_OF_FRAME0) || (stat & LCDC_END_OF_FRAME1)) { - struct drm_pending_vblank_event *event; + if (stat & LCDC_END_OF_FRAME0) { unsigned long flags; - uint32_t dirty = tilcdc_crtc->dirty & stat; - - tilcdc_clear_irqstatus(dev, stat);
- if (dirty & LCDC_END_OF_FRAME0) - set_scanout(crtc, 0); - - if (dirty & LCDC_END_OF_FRAME1) - set_scanout(crtc, 1); + drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
drm_handle_vblank(dev, 0);
spin_lock_irqsave(&dev->event_lock, flags); - event = tilcdc_crtc->event; - tilcdc_crtc->event = NULL; - if (event) - drm_send_vblank_event(dev, 0, event); - spin_unlock_irqrestore(&dev->event_lock, flags);
- if (dirty && !tilcdc_crtc->dirty) - drm_vblank_put(dev, 0); + if (tilcdc_crtc->event) { + drm_send_vblank_event(dev, 0, tilcdc_crtc->event); + tilcdc_crtc->event = NULL; + } + + spin_unlock_irqrestore(&dev->event_lock, flags); }
if (priv->rev == 2) { @@ -713,7 +692,6 @@ void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) if (event && event->base.file_priv == file) { tilcdc_crtc->event = NULL; event->base.destroy(&event->base); - drm_vblank_put(dev, 0); } spin_unlock_irqrestore(&dev->event_lock, flags); } diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index ab62aa4..24f232b 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -388,6 +388,7 @@ static int tilcdc_irq_postinstall(struct drm_device *dev) else tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA | + LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_FRAME_DONE);
return 0; @@ -405,41 +406,19 @@ static void tilcdc_irq_uninstall(struct drm_device *dev) } else { tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA | - LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_V2_END_OF_FRAME1_INT_ENA | + LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_FRAME_DONE); } - -} - -static void enable_vblank(struct drm_device *dev, bool enable) -{ - struct tilcdc_drm_private *priv = dev->dev_private; - u32 reg, mask; - - if (priv->rev == 1) { - reg = LCDC_DMA_CTRL_REG; - mask = LCDC_V1_END_OF_FRAME_INT_ENA; - } else { - reg = LCDC_INT_ENABLE_SET_REG; - mask = LCDC_V2_END_OF_FRAME0_INT_ENA | - LCDC_V2_END_OF_FRAME1_INT_ENA; - } - - if (enable) - tilcdc_set(dev, reg, mask); - else - tilcdc_clear(dev, reg, mask); }
static int tilcdc_enable_vblank(struct drm_device *dev, unsigned int pipe) { - enable_vblank(dev, true); return 0; }
static void tilcdc_disable_vblank(struct drm_device *dev, unsigned int pipe) { - enable_vblank(dev, false); + return; }
#if defined(CONFIG_DEBUG_FS) || defined(CONFIG_PM_SLEEP)
From: Tomi Valkeinen tomi.valkeinen@ti.com
Do not update the next frame buffer close to vertical blank. This is to avoid situation when the frame changes between writing of LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com [Added description to the patch] Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 61 +++++++++++++++++++++++++++++++----- 1 file changed, 53 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 7514d40..7445356 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -21,6 +21,8 @@ #include "tilcdc_drv.h" #include "tilcdc_regs.h"
+#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000 + struct tilcdc_crtc { struct drm_crtc base;
@@ -29,8 +31,12 @@ struct tilcdc_crtc { int dpms; wait_queue_head_t frame_done_wq; bool frame_done; + spinlock_t irq_lock; + + ktime_t last_vblank;
struct drm_framebuffer *curr_fb; + struct drm_framebuffer *next_fb;
/* for deferred fb unref's: */ struct drm_flip_work unref_work; @@ -146,6 +152,8 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; int r; unsigned long flags; + s64 tdiff; + ktime_t next_vblank;
r = tilcdc_verify_fb(crtc, fb); if (r) @@ -162,12 +170,21 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
pm_runtime_get_sync(dev->dev);
+ spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
- set_scanout(crtc, fb); + next_vblank = ktime_add_us(tilcdc_crtc->last_vblank, + 1000000 / crtc->hwmode.vrefresh); + + tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get())); + + if (tdiff >= TILCDC_VBLANK_SAFETY_THRESHOLD_US) + set_scanout(crtc, fb); + else + tilcdc_crtc->next_fb = fb;
- spin_lock_irqsave(&dev->event_lock, flags); tilcdc_crtc->event = event; - spin_unlock_irqrestore(&dev->event_lock, flags); + + spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
pm_runtime_put_sync(dev->dev);
@@ -211,6 +228,12 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
pm_runtime_put_sync(dev->dev);
+ if (tilcdc_crtc->next_fb) { + drm_flip_work_queue(&tilcdc_crtc->unref_work, + tilcdc_crtc->next_fb); + tilcdc_crtc->next_fb = NULL; + } + if (tilcdc_crtc->curr_fb) { drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->curr_fb); @@ -651,19 +674,39 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
if (stat & LCDC_END_OF_FRAME0) { unsigned long flags; + bool skip_event = false; + ktime_t now; + + now = ktime_get();
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
+ spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); + + tilcdc_crtc->last_vblank = now; + + if (tilcdc_crtc->next_fb) { + set_scanout(crtc, tilcdc_crtc->next_fb); + tilcdc_crtc->next_fb = NULL; + skip_event = true; + } + + spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); + drm_handle_vblank(dev, 0);
- spin_lock_irqsave(&dev->event_lock, flags); + if (!skip_event) { + struct drm_pending_vblank_event *event; + + spin_lock_irqsave(&dev->event_lock, flags);
- if (tilcdc_crtc->event) { - drm_send_vblank_event(dev, 0, tilcdc_crtc->event); + event = tilcdc_crtc->event; tilcdc_crtc->event = NULL; - } + if (event) + drm_send_vblank_event(dev, 0, event);
- spin_unlock_irqrestore(&dev->event_lock, flags); + spin_unlock_irqrestore(&dev->event_lock, flags); + } }
if (priv->rev == 2) { @@ -716,6 +759,8 @@ struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) drm_flip_work_init(&tilcdc_crtc->unref_work, "unref", unref_worker);
+ spin_lock_init(&tilcdc_crtc->irq_lock); + ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs); if (ret < 0) goto fail;
Fix interrupt enable/disable code for version 2 tilcdc. In version 2 tilcdc there is a separate register for disabling interrupts. Writing 0 to enable registers bits does not have any effect. The interrupt clear register works the same way, writing 1 to specific bit disables the interrupt and writing 0 does not have any effect.
The "bug" that is fixed here does not really do any harm since the interrupts are enabled only once in the power up and disabled before power down.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 24f232b..3b36747 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -383,13 +383,14 @@ static int tilcdc_irq_postinstall(struct drm_device *dev) struct tilcdc_drm_private *priv = dev->dev_private;
/* enable FIFO underflow irq: */ - if (priv->rev == 1) + if (priv->rev == 1) { tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_UNDERFLOW_INT_ENA); - else - tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG, + } else { + tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_FRAME_DONE); + }
return 0; } @@ -404,7 +405,7 @@ static void tilcdc_irq_uninstall(struct drm_device *dev) LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA); tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_V1_END_OF_FRAME_INT_ENA); } else { - tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG, + tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA | LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_FRAME_DONE); @@ -449,7 +450,7 @@ static const struct { REG(2, false, LCDC_INT_ENABLE_CLR_REG), REG(2, false, LCDC_END_OF_INT_IND_REG), REG(2, true, LCDC_CLK_ENABLE_REG), - REG(2, true, LCDC_INT_ENABLE_SET_REG), + REG(2, true, LCDC_INT_ENABLE_SET_REG), #undef REG };
Removes the duplicate LCDC_INT_ENABLE_SET_REG-entry in registers array.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 3b36747..3205ac2 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -446,11 +446,10 @@ static const struct { /* new in revision 2: */ REG(2, false, LCDC_RAW_STAT_REG), REG(2, false, LCDC_MASKED_STAT_REG), - REG(2, false, LCDC_INT_ENABLE_SET_REG), + REG(2, true, LCDC_INT_ENABLE_SET_REG), REG(2, false, LCDC_INT_ENABLE_CLR_REG), REG(2, false, LCDC_END_OF_INT_IND_REG), REG(2, true, LCDC_CLK_ENABLE_REG), - REG(2, true, LCDC_INT_ENABLE_SET_REG), #undef REG };
Add ratelimited prints on sync lost and FIFO underrun interrupts.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 8 ++++++++ drivers/gpu/drm/tilcdc/tilcdc_drv.c | 4 ++-- 2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 7445356..87c4765 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -717,6 +717,14 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); }
+ if (stat & LCDC_SYNC_LOST) + dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost", + __func__, stat); + + if (stat & LCDC_FIFO_UNDERFLOW) + dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow", + __func__, stat); + return IRQ_HANDLED; }
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 3205ac2..3a39328 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -389,7 +389,7 @@ static int tilcdc_irq_postinstall(struct drm_device *dev) tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_END_OF_FRAME0_INT_ENA | - LCDC_FRAME_DONE); + LCDC_FRAME_DONE | LCDC_SYNC_LOST); }
return 0; @@ -408,7 +408,7 @@ static void tilcdc_irq_uninstall(struct drm_device *dev) tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA | LCDC_V2_END_OF_FRAME0_INT_ENA | - LCDC_FRAME_DONE); + LCDC_FRAME_DONE | LCDC_SYNC_LOST); } }
Disable the sync lost interrupt if it fires on every frame for 50 consecutive frames in a row. This is relatively sure sign of the sync lost interrupt being stuck and firing on every frame even if the display otherwise appears to work OK.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 87c4765..e886277 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -43,6 +43,9 @@ struct tilcdc_crtc {
/* Only set if an external encoder is connected */ bool simulate_vesa_sync; + + int sync_lost_count; + bool frame_intact; }; #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
@@ -662,6 +665,8 @@ out: pm_runtime_put_sync(dev->dev); }
+#define SYNC_LOST_COUNT_LIMIT 50 + irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); @@ -707,6 +712,11 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
spin_unlock_irqrestore(&dev->event_lock, flags); } + + if (tilcdc_crtc->frame_intact) + tilcdc_crtc->sync_lost_count = 0; + else + tilcdc_crtc->frame_intact = true; }
if (priv->rev == 2) { @@ -717,9 +727,18 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); }
- if (stat & LCDC_SYNC_LOST) + if (stat & LCDC_SYNC_LOST) { dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost", __func__, stat); + tilcdc_crtc->frame_intact = false; + if (tilcdc_crtc->sync_lost_count++ > SYNC_LOST_COUNT_LIMIT) { + dev_err(dev->dev, + "%s(0x%08x): Sync lost flood detected, disabling the interrupt", + __func__, stat); + tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, + LCDC_SYNC_LOST); + } + }
if (stat & LCDC_FIFO_UNDERFLOW) dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
Initialize port device node pointer in the tilcdc crtc. Fixes "Falling back to first CRTC" warning from tda998x driver.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index e886277..cfd3fd1 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -124,6 +124,7 @@ static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+ of_node_put(crtc->port); drm_crtc_cleanup(crtc); drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
@@ -768,6 +769,7 @@ void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) { + struct tilcdc_drm_private *priv = dev->dev_private; struct tilcdc_crtc *tilcdc_crtc; struct drm_crtc *crtc; int ret; @@ -794,6 +796,15 @@ struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
+ if (priv->is_componentized) { + crtc->port = + of_get_child_by_name(dev->dev->of_node, "port"); + if (!crtc->port) { + dev_warn(dev->dev, "no port node found in %s\n", + dev->dev->of_node->full_name); + } + } + return crtc;
fail:
On 16/02/16 16:18, Jyri Sarha wrote:
Initialize port device node pointer in the tilcdc crtc. Fixes "Falling back to first CRTC" warning from tda998x driver.
The description is rather short, and doesn't really explain what was wrong and why this fixes it.
Signed-off-by: Jyri Sarha jsarha@ti.com
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index e886277..cfd3fd1 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -124,6 +124,7 @@ static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
- of_node_put(crtc->port); drm_crtc_cleanup(crtc); drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
@@ -768,6 +769,7 @@ void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) {
- struct tilcdc_drm_private *priv = dev->dev_private; struct tilcdc_crtc *tilcdc_crtc; struct drm_crtc *crtc; int ret;
@@ -794,6 +796,15 @@ struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
- if (priv->is_componentized) {
crtc->port =of_get_child_by_name(dev->dev->of_node, "port");if (!crtc->port) {dev_warn(dev->dev, "no port node found in %s\n",dev->dev->of_node->full_name);
Isn't this an error? Can the driver proceed if there's no port node?
Tomi
On 16/02/16 16:18, Jyri Sarha wrote:
Changes since the first version of the series:
- Dropped: "drm/tilcdc: disable console switching during pm operations"
- Changed: "drm/tilcdc: Allocate register storage based on the actual number.."
- Reversed kcalloc() nmemb and size parameters to correct order
- Addeed: "drm/tilcdc: Initialize crtc->port"
We have not been too active in pushing the tilcdc fixes to mainline. This series tries to bring the mainline tilcdc upto same level with TI ti-linux tree.
Some patches that touch the same place over and over again have been squashed into one, leaving author of the last rewrite on top.
Aside the few minor comments I had, looks good to me.
Acked-by: Tomi Valkeinen tomi.valkeinen@ti.com
Tomi
dri-devel@lists.freedesktop.org
-
Jyri Sarha -
Tomi Valkeinen