The fbdev emulation is only ever used on Ingenic SoCs to run old SDL1 based games at 16bpp (rgb565). Recent applications generally talk to DRM directly, and can request their favourite pixel format; so we can make everybody happy by switching the emulated fbdev to 16bpp.

v2: No change

Signed-off-by: Paul Cercueil paul@crapouillou.net --- drivers/gpu/drm/ingenic/ingenic-drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c index 5493a80d7d2f..3f8cc98d41fe 100644 --- a/drivers/gpu/drm/ingenic/ingenic-drm.c +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c @@ -807,7 +807,7 @@ static int ingenic_drm_probe(struct platform_device *pdev) goto err_devclk_disable; }

- ret = drm_fbdev_generic_setup(drm, 32); + ret = drm_fbdev_generic_setup(drm, 16); if (ret) dev_warn(dev, "Unable to start fbdev emulation: %i", ret);

Ingenic SoCs are most notably used in cheap chinese handheld gaming consoles. There, the games and applications generally render in software directly in the emulated framebuffer using SDL1.

Since the emulated framebuffer is mapped as write-combine by default, these applications start to run really slow as soon as alpha-blending is used.

Add a 'cached_gem_buffers' option to the ingenic-drm driver to mmap the GEM buffers as fully cached to address this issue.

v2: Use standard noncoherent DMA APIs

Signed-off-by: Paul Cercueil paul@crapouillou.net --- drivers/gpu/drm/ingenic/ingenic-drm.c | 35 +++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c index 3f8cc98d41fe..e51ac8d62d27 100644 --- a/drivers/gpu/drm/ingenic/ingenic-drm.c +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c @@ -6,6 +6,8 @@

#include <linux/clk.h> #include <linux/dma-mapping.h> +#include <linux/dma-noncoherent.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -30,6 +32,11 @@ #include <drm/drm_probe_helper.h> #include <drm/drm_vblank.h>

+static bool ingenic_drm_cached_gem_buf; +module_param_named(cached_gem_buffers, ingenic_drm_cached_gem_buf, bool, 0400); +MODULE_PARM_DESC(cached_gem_buffers, + "Enable fully cached GEM buffers [default=false]"); + #define JZ_REG_LCD_CFG 0x00 #define JZ_REG_LCD_VSYNC 0x04 #define JZ_REG_LCD_HSYNC 0x08 @@ -379,15 +386,23 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *state = plane->state; unsigned int width, height, cpp; dma_addr_t addr; + uint32_t len;

if (state && state->fb) { addr = drm_fb_cma_get_gem_addr(state->fb, state, 0); + width = state->src_w >> 16; height = state->src_h >> 16; cpp = state->fb->format->cpp[plane->index]; + len = width * height * cpp; + + if (ingenic_drm_cached_gem_buf) { + dma_cache_sync(priv->dev, phys_to_virt(addr), + len, DMA_TO_DEVICE); + }

priv->dma_hwdesc->addr = addr; - priv->dma_hwdesc->cmd = width * height * cpp / 4; + priv->dma_hwdesc->cmd = len / 4; priv->dma_hwdesc->cmd |= JZ_LCD_CMD_EOF_IRQ; } } @@ -532,6 +547,22 @@ static void ingenic_drm_disable_vblank(struct drm_crtc *crtc)

DEFINE_DRM_GEM_CMA_FOPS(ingenic_drm_fops);

+static int ingenic_drm_gem_mmap(struct drm_gem_object *obj, + struct vm_area_struct *vma) +{ + struct drm_gem_cma_object *cma_obj = to_drm_gem_cma_obj(obj); + struct ingenic_drm *priv = drm_device_get_priv(obj->dev); + unsigned long attrs = DMA_ATTR_NON_CONSISTENT; + + if (!ingenic_drm_cached_gem_buf) + return drm_gem_cma_prime_mmap(obj, vma); + + vma->vm_page_prot = dma_pgprot(priv->dev, vma->vm_page_prot, attrs); + + return dma_mmap_attrs(priv->dev, vma, cma_obj->vaddr, cma_obj->paddr, + vma->vm_end - vma->vm_start, attrs); +} + static struct drm_driver ingenic_drm_driver_data = { .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, .name = "ingenic-drm", @@ -553,7 +584,7 @@ static struct drm_driver ingenic_drm_driver_data = { .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, .gem_prime_vmap = drm_gem_cma_prime_vmap, .gem_prime_vunmap = drm_gem_cma_prime_vunmap, - .gem_prime_mmap = drm_gem_cma_prime_mmap, + .gem_prime_mmap = ingenic_drm_gem_mmap,

.irq_handler = ingenic_drm_irq_handler, .release = ingenic_drm_release,

Hi,

Any feedback for this patchset?

Thanks, -Paul

Le mer. 26 févr. 2020 à 1:30, Paul Cercueil paul@crapouillou.net a écrit :

If the panel interface is 24-bit but our primary plane is 16bpp, configure as if the panel was 18-bit. This tricks permits the display of 16bpp data on a 24-bit panel by wiring each color component to the MSBs of the 24-bit interface.

v2: Check bytes-per-pixel count instead of fourcc format

Signed-off-by: Paul Cercueil paul@crapouillou.net

drivers/gpu/drm/ingenic/ingenic-drm.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c index 6d47ef7b148c..5493a80d7d2f 100644 --- a/drivers/gpu/drm/ingenic/ingenic-drm.c +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c @@ -400,6 +400,8 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode = &crtc_state->adjusted_mode; struct drm_connector *conn = conn_state->connector; struct drm_display_info *info = &conn->display_info;

• struct drm_plane_state *plane_state =

crtc_state->crtc->primary->state;

• const struct drm_format_info *finfo = NULL; unsigned int cfg;

  priv->panel_is_sharp = info->bus_flags & DRM_BUS_FLAG_SHARP_SIGNALS;

@@ -435,7 +437,21 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder, cfg |= JZ_LCD_CFG_MODE_GENERIC_18BIT; break; case MEDIA_BUS_FMT_RGB888_1X24:

• 		cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT;
  

• 		if (plane_state && plane_state->fb)
  

• 			finfo = plane_state->fb->format;
  

• 		/*
  

• 		 * If the panel interface is 24-bit but our
  

• 		 * primary plane is 16bpp, configure as if the
  

• 		 * panel was 18-bit. This tricks permits the
  

• 		 * display of 16bpp data on a 24-bit panel by
  

• 		 * wiring each color component to the MSBs of
  

• 		 * the 24-bit interface.
  

• 		 */
  

• 		if (finfo && finfo->cpp[0] < 3)
  

• 			cfg |= JZ_LCD_CFG_MODE_GENERIC_18BIT;
  

• 		else
  

• 			cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT;
  	break;
  case MEDIA_BUS_FMT_RGB888_3X8:
  	cfg |= JZ_LCD_CFG_MODE_8BIT_SERIAL;
  

-- 2.25.0