Each interface (DSI/eDP/HDMI) has to control its own PLL. This change only add the register description for each one of them.

Let's not make the register description common as some registers may not be implemented the same way for each interface PHY.

Signed-off-by: Stephane Viau sviau@codeaurora.org --- rnndb/dsi/dsi.xml | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++ rnndb/edp/edp.xml | 51 +++++++++++++++++++++++++++++++++++++++++ rnndb/hdmi/hdmi.xml | 51 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 168 insertions(+)

diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml index 480ec46..ce6085a 100644 --- a/rnndb/dsi/dsi.xml +++ b/rnndb/dsi/dsi.xml @@ -442,4 +442,70 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x00018" name="CAL_PWR_CFG"/> </domain>

+<domain name="DSI_28nm_PHY_PLL" width="32"> + <reg32 offset="0x00000" name="REFCLK_CFG"/> + <reg32 offset="0x00004" name="POSTDIV1_CFG"/> + <reg32 offset="0x00008" name="CHGPUMP_CFG"/> + <reg32 offset="0x0000C" name="VCOLPF_CFG"/> + <reg32 offset="0x00010" name="VREG_CFG"/> + <reg32 offset="0x00014" name="PWRGEN_CFG"/> + <reg32 offset="0x00018" name="DMUX_CFG"/> + <reg32 offset="0x0001C" name="AMUX_CFG"/> + <reg32 offset="0x00020" name="GLB_CFG"> + <bitfield name="PLL_PWRDN_B" pos="0" type="boolean"/> + <bitfield name="PLL_LDO_PWRDN_B" pos="1" type="boolean"/> + <bitfield name="PLL_PWRGEN_PWRDN_B" pos="2" type="boolean"/> + <bitfield name="PLL_ENABLE" pos="3" type="boolean"/> + </reg32> + <reg32 offset="0x00024" name="POSTDIV2_CFG"/> + <reg32 offset="0x00028" name="POSTDIV3_CFG"/> + <reg32 offset="0x0002C" name="LPFR_CFG"/> + <reg32 offset="0x00030" name="LPFC1_CFG"/> + <reg32 offset="0x00034" name="LPFC2_CFG"/> + <reg32 offset="0x00038" name="SDM_CFG0"/> + <reg32 offset="0x0003C" name="SDM_CFG1"/> + <reg32 offset="0x00040" name="SDM_CFG2"/> + <reg32 offset="0x00044" name="SDM_CFG3"/> + <reg32 offset="0x00048" name="SDM_CFG4"/> + <reg32 offset="0x0004C" name="SSC_CFG0"/> + <reg32 offset="0x00050" name="SSC_CFG1"/> + <reg32 offset="0x00054" name="SSC_CFG2"/> + <reg32 offset="0x00058" name="SSC_CFG3"/> + <reg32 offset="0x0005C" name="LKDET_CFG0"/> + <reg32 offset="0x00060" name="LKDET_CFG1"/> + <reg32 offset="0x00064" name="LKDET_CFG2"/> + <reg32 offset="0x00068" name="TEST_CFG"> + <bitfield name="PLL_SW_RESET" pos="0" type="boolean"/> + </reg32> + <reg32 offset="0x0006C" name="CAL_CFG0"/> + <reg32 offset="0x00070" name="CAL_CFG1"/> + <reg32 offset="0x00074" name="CAL_CFG2"/> + <reg32 offset="0x00078" name="CAL_CFG3"/> + <reg32 offset="0x0007C" name="CAL_CFG4"/> + <reg32 offset="0x00080" name="CAL_CFG5"/> + <reg32 offset="0x00084" name="CAL_CFG6"/> + <reg32 offset="0x00088" name="CAL_CFG7"/> + <reg32 offset="0x0008C" name="CAL_CFG8"/> + <reg32 offset="0x00090" name="CAL_CFG9"/> + <reg32 offset="0x00094" name="CAL_CFG10"/> + <reg32 offset="0x00098" name="CAL_CFG11"/> + <reg32 offset="0x0009C" name="EFUSE_CFG"/> + <reg32 offset="0x000A0" name="DEBUG_BUS_SEL"/> + <reg32 offset="0x000A4" name="CTRL_42"/> + <reg32 offset="0x000A8" name="CTRL_43"/> + <reg32 offset="0x000AC" name="CTRL_44"/> + <reg32 offset="0x000B0" name="CTRL_45"/> + <reg32 offset="0x000B4" name="CTRL_46"/> + <reg32 offset="0x000B8" name="CTRL_47"/> + <reg32 offset="0x000BC" name="CTRL_48"/> + <reg32 offset="0x000C0" name="STATUS"> + <bitfield name="PLL_RDY" pos="0" type="boolean"/> + </reg32> + <reg32 offset="0x000C4" name="DEBUG_BUS0"/> + <reg32 offset="0x000C8" name="DEBUG_BUS1"/> + <reg32 offset="0x000CC" name="DEBUG_BUS2"/> + <reg32 offset="0x000D0" name="DEBUG_BUS3"/> + <reg32 offset="0x000D4" name="CTRL_54"/> +</domain> + </database> diff --git a/rnndb/edp/edp.xml b/rnndb/edp/edp.xml index ea2a74b..00fc611 100644 --- a/rnndb/edp/edp.xml +++ b/rnndb/edp/edp.xml @@ -185,4 +185,55 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x0598" name="GLB_PHY_STATUS"/> </domain>

+<domain name="EDP_28nm_PHY_PLL" width="32"> + <reg32 offset="0x00000" name="REFCLK_CFG"/> + <reg32 offset="0x00004" name="POSTDIV1_CFG"/> + <reg32 offset="0x00008" name="CHGPUMP_CFG"/> + <reg32 offset="0x0000C" name="VCOLPF_CFG"/> + <reg32 offset="0x00010" name="VREG_CFG"/> + <reg32 offset="0x00014" name="PWRGEN_CFG"/> + <reg32 offset="0x00018" name="DMUX_CFG"/> + <reg32 offset="0x0001C" name="AMUX_CFG"/> + <reg32 offset="0x00020" name="GLB_CFG"> + <bitfield name="PLL_PWRDN_B" pos="0" type="boolean"/> + <bitfield name="PLL_LDO_PWRDN_B" pos="1" type="boolean"/> + <bitfield name="PLL_PWRGEN_PWRDN_B" pos="2" type="boolean"/> + <bitfield name="PLL_ENABLE" pos="3" type="boolean"/> + </reg32> + <reg32 offset="0x00024" name="POSTDIV2_CFG"/> + <reg32 offset="0x00028" name="POSTDIV3_CFG"/> + <reg32 offset="0x0002C" name="LPFR_CFG"/> + <reg32 offset="0x00030" name="LPFC1_CFG"/> + <reg32 offset="0x00034" name="LPFC2_CFG"/> + <reg32 offset="0x00038" name="SDM_CFG0"/> + <reg32 offset="0x0003C" name="SDM_CFG1"/> + <reg32 offset="0x00040" name="SDM_CFG2"/> + <reg32 offset="0x00044" name="SDM_CFG3"/> + <reg32 offset="0x00048" name="SDM_CFG4"/> + <reg32 offset="0x0004C" name="SSC_CFG0"/> + <reg32 offset="0x00050" name="SSC_CFG1"/> + <reg32 offset="0x00054" name="SSC_CFG2"/> + <reg32 offset="0x00058" name="SSC_CFG3"/> + <reg32 offset="0x0005C" name="LKDET_CFG0"/> + <reg32 offset="0x00060" name="LKDET_CFG1"/> + <reg32 offset="0x00064" name="LKDET_CFG2"/> + <reg32 offset="0x00068" name="TEST_CFG"> + <bitfield name="PLL_SW_RESET" pos="0" type="boolean"/> + </reg32> + <reg32 offset="0x0006C" name="CAL_CFG0"/> + <reg32 offset="0x00070" name="CAL_CFG1"/> + <reg32 offset="0x00074" name="CAL_CFG2"/> + <reg32 offset="0x00078" name="CAL_CFG3"/> + <reg32 offset="0x0007C" name="CAL_CFG4"/> + <reg32 offset="0x00080" name="CAL_CFG5"/> + <reg32 offset="0x00084" name="CAL_CFG6"/> + <reg32 offset="0x00088" name="CAL_CFG7"/> + <reg32 offset="0x0008C" name="CAL_CFG8"/> + <reg32 offset="0x00090" name="CAL_CFG9"/> + <reg32 offset="0x00094" name="CAL_CFG10"/> + <reg32 offset="0x00098" name="CAL_CFG11"/> + <reg32 offset="0x0009C" name="EFUSE_CFG"/> + <reg32 offset="0x000A0" name="DEBUG_BUS_SEL"/> +</domain> + </database> diff --git a/rnndb/hdmi/hdmi.xml b/rnndb/hdmi/hdmi.xml index 9ac5e00..d3336a9 100644 --- a/rnndb/hdmi/hdmi.xml +++ b/rnndb/hdmi/hdmi.xml @@ -640,4 +640,55 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <reg32 offset="0x00048" name="BIST_PATN3"/> </domain>

+<domain name="HDMI_28nm_PHY_PLL" width="32"> + <reg32 offset="0x00000" name="REFCLK_CFG"/> + <reg32 offset="0x00004" name="POSTDIV1_CFG"/> + <reg32 offset="0x00008" name="CHGPUMP_CFG"/> + <reg32 offset="0x0000C" name="VCOLPF_CFG"/> + <reg32 offset="0x00010" name="VREG_CFG"/> + <reg32 offset="0x00014" name="PWRGEN_CFG"/> + <reg32 offset="0x00018" name="DMUX_CFG"/> + <reg32 offset="0x0001C" name="AMUX_CFG"/> + <reg32 offset="0x00020" name="GLB_CFG"> + <bitfield name="PLL_PWRDN_B" pos="0" type="boolean"/> + <bitfield name="PLL_LDO_PWRDN_B" pos="1" type="boolean"/> + <bitfield name="PLL_PWRGEN_PWRDN_B" pos="2" type="boolean"/> + <bitfield name="PLL_ENABLE" pos="3" type="boolean"/> + </reg32> + <reg32 offset="0x00024" name="POSTDIV2_CFG"/> + <reg32 offset="0x00028" name="POSTDIV3_CFG"/> + <reg32 offset="0x0002C" name="LPFR_CFG"/> + <reg32 offset="0x00030" name="LPFC1_CFG"/> + <reg32 offset="0x00034" name="LPFC2_CFG"/> + <reg32 offset="0x00038" name="SDM_CFG0"/> + <reg32 offset="0x0003C" name="SDM_CFG1"/> + <reg32 offset="0x00040" name="SDM_CFG2"/> + <reg32 offset="0x00044" name="SDM_CFG3"/> + <reg32 offset="0x00048" name="SDM_CFG4"/> + <reg32 offset="0x0004C" name="SSC_CFG0"/> + <reg32 offset="0x00050" name="SSC_CFG1"/> + <reg32 offset="0x00054" name="SSC_CFG2"/> + <reg32 offset="0x00058" name="SSC_CFG3"/> + <reg32 offset="0x0005C" name="LKDET_CFG0"/> + <reg32 offset="0x00060" name="LKDET_CFG1"/> + <reg32 offset="0x00064" name="LKDET_CFG2"/> + <reg32 offset="0x00068" name="TEST_CFG"> + <bitfield name="PLL_SW_RESET" pos="0" type="boolean"/> + </reg32> + <reg32 offset="0x0006C" name="CAL_CFG0"/> + <reg32 offset="0x00070" name="CAL_CFG1"/> + <reg32 offset="0x00074" name="CAL_CFG2"/> + <reg32 offset="0x00078" name="CAL_CFG3"/> + <reg32 offset="0x0007C" name="CAL_CFG4"/> + <reg32 offset="0x00080" name="CAL_CFG5"/> + <reg32 offset="0x00084" name="CAL_CFG6"/> + <reg32 offset="0x00088" name="CAL_CFG7"/> + <reg32 offset="0x0008C" name="CAL_CFG8"/> + <reg32 offset="0x00090" name="CAL_CFG9"/> + <reg32 offset="0x00094" name="CAL_CFG10"/> + <reg32 offset="0x00098" name="CAL_CFG11"/> + <reg32 offset="0x0009C" name="EFUSE_CFG"/> + <reg32 offset="0x000A0" name="DEBUG_BUS_SEL"/> +</domain> + </database>

This change includes the generated file of the following:

rnndb: Add 28nm PLL register description

Each interface (DSI/eDP/HDMI) has to control its own PLL. This change only add the register description for each one of them.

Let's not make the register description common as some registers may not be implemented the same way for each interface PHY.

v2: - Add description for more bit fields - Rebase on change "rnndb: dsi: Add DSI_LANE_CTRL info"

Signed-off-by: Stephane Viau sviau@codeaurora.org Signed-off-by: Hai Li hali@codeaurora.org --- drivers/gpu/drm/msm/dsi/dsi.xml.h | 149 +++++++++++++++++++++++++++++++++++- drivers/gpu/drm/msm/edp/edp.xml.h | 104 +++++++++++++++++++++---- drivers/gpu/drm/msm/hdmi/hdmi.xml.h | 102 +++++++++++++++++++++--- 3 files changed, 330 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h index 06c1441..4e4a700 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h @@ -8,7 +8,7 @@ http://github.com/freedreno/envytools/ git clone https://github.com/freedreno/envytools.git

The rules-ng-ng source files this header was generated from are: -- /usr2/hali/local/envytools/envytools/rnndb/dsi/dsi.xml ( 18802 bytes, from 2015-05-06 21:35:51) +- /usr2/hali/local/envytools/envytools/rnndb/dsi/dsi.xml ( 22094 bytes, from 2015-05-06 21:40:40) - /usr2/hali/local/envytools/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-01-28 21:43:22)

Copyright (C) 2013-2015 by the following authors: @@ -838,5 +838,152 @@ static inline uint32_t DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)

#define REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG 0x00000018

+#define REG_DSI_28nm_PHY_PLL_REFCLK_CFG 0x00000000 +#define DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR 0x00000001 + +#define REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG 0x00000004 + +#define REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG 0x00000008 + +#define REG_DSI_28nm_PHY_PLL_VCOLPF_CFG 0x0000000c + +#define REG_DSI_28nm_PHY_PLL_VREG_CFG 0x00000010 +#define DSI_28nm_PHY_PLL_VREG_CFG_POSTDIV1_BYPASS_B 0x00000002 + +#define REG_DSI_28nm_PHY_PLL_PWRGEN_CFG 0x00000014 + +#define REG_DSI_28nm_PHY_PLL_DMUX_CFG 0x00000018 + +#define REG_DSI_28nm_PHY_PLL_AMUX_CFG 0x0000001c + +#define REG_DSI_28nm_PHY_PLL_GLB_CFG 0x00000020 +#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B 0x00000001 +#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B 0x00000002 +#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B 0x00000004 +#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE 0x00000008 + +#define REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG 0x00000024 + +#define REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG 0x00000028 + +#define REG_DSI_28nm_PHY_PLL_LPFR_CFG 0x0000002c + +#define REG_DSI_28nm_PHY_PLL_LPFC1_CFG 0x00000030 + +#define REG_DSI_28nm_PHY_PLL_LPFC2_CFG 0x00000034 + +#define REG_DSI_28nm_PHY_PLL_SDM_CFG0 0x00000038 +#define DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__MASK 0x0000003f +#define DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__SHIFT 0 +static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(uint32_t val) +{ + return ((val) << DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__MASK; +} +#define DSI_28nm_PHY_PLL_SDM_CFG0_BYP 0x00000040 + +#define REG_DSI_28nm_PHY_PLL_SDM_CFG1 0x0000003c +#define DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK 0x0000003f +#define DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__SHIFT 0 +static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(uint32_t val) +{ + return ((val) << DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK; +} +#define DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__MASK 0x00000040 +#define DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__SHIFT 6 +static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN(uint32_t val) +{ + return ((val) << DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__MASK; +} + +#define REG_DSI_28nm_PHY_PLL_SDM_CFG2 0x00000040 +#define DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__MASK 0x000000ff +#define DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__SHIFT 0 +static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(uint32_t val) +{ + return ((val) << DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__MASK; +} + +#define REG_DSI_28nm_PHY_PLL_SDM_CFG3 0x00000044 +#define DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__MASK 0x000000ff +#define DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__SHIFT 0 +static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(uint32_t val) +{ + return ((val) << DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__MASK; +} + +#define REG_DSI_28nm_PHY_PLL_SDM_CFG4 0x00000048 + +#define REG_DSI_28nm_PHY_PLL_SSC_CFG0 0x0000004c + +#define REG_DSI_28nm_PHY_PLL_SSC_CFG1 0x00000050 + +#define REG_DSI_28nm_PHY_PLL_SSC_CFG2 0x00000054 + +#define REG_DSI_28nm_PHY_PLL_SSC_CFG3 0x00000058 + +#define REG_DSI_28nm_PHY_PLL_LKDET_CFG0 0x0000005c + +#define REG_DSI_28nm_PHY_PLL_LKDET_CFG1 0x00000060 + +#define REG_DSI_28nm_PHY_PLL_LKDET_CFG2 0x00000064 + +#define REG_DSI_28nm_PHY_PLL_TEST_CFG 0x00000068 +#define DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET 0x00000001 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG0 0x0000006c + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG1 0x00000070 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG2 0x00000074 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG3 0x00000078 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG4 0x0000007c + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG5 0x00000080 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG6 0x00000084 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG7 0x00000088 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG8 0x0000008c + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG9 0x00000090 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG10 0x00000094 + +#define REG_DSI_28nm_PHY_PLL_CAL_CFG11 0x00000098 + +#define REG_DSI_28nm_PHY_PLL_EFUSE_CFG 0x0000009c + +#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS_SEL 0x000000a0 + +#define REG_DSI_28nm_PHY_PLL_CTRL_42 0x000000a4 + +#define REG_DSI_28nm_PHY_PLL_CTRL_43 0x000000a8 + +#define REG_DSI_28nm_PHY_PLL_CTRL_44 0x000000ac + +#define REG_DSI_28nm_PHY_PLL_CTRL_45 0x000000b0 + +#define REG_DSI_28nm_PHY_PLL_CTRL_46 0x000000b4 + +#define REG_DSI_28nm_PHY_PLL_CTRL_47 0x000000b8 + +#define REG_DSI_28nm_PHY_PLL_CTRL_48 0x000000bc + +#define REG_DSI_28nm_PHY_PLL_STATUS 0x000000c0 +#define DSI_28nm_PHY_PLL_STATUS_PLL_RDY 0x00000001 + +#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS0 0x000000c4 + +#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS1 0x000000c8 + +#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS2 0x000000cc + +#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS3 0x000000d0 + +#define REG_DSI_28nm_PHY_PLL_CTRL_54 0x000000d4 +

#endif /* DSI_XML */ diff --git a/drivers/gpu/drm/msm/edp/edp.xml.h b/drivers/gpu/drm/msm/edp/edp.xml.h index a29f1df..e680b66 100644 --- a/drivers/gpu/drm/msm/edp/edp.xml.h +++ b/drivers/gpu/drm/msm/edp/edp.xml.h @@ -8,19 +8,10 @@ http://github.com/freedreno/envytools/ git clone https://github.com/freedreno/envytools.git

The rules-ng-ng source files this header was generated from are: -- /home/robclark/src/freedreno/envytools/rnndb/msm.xml ( 676 bytes, from 2014-12-05 15:34:49) -- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2013-03-31 16:51:27) -- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml ( 20908 bytes, from 2014-12-08 16:13:00) -- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml ( 2357 bytes, from 2014-12-08 16:13:00) -- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml ( 27208 bytes, from 2015-01-13 23:56:11) -- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml ( 11712 bytes, from 2013-08-17 17:13:43) -- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml ( 344 bytes, from 2013-08-11 19:26:32) -- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml ( 1686 bytes, from 2014-10-31 16:48:57) -- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml ( 600 bytes, from 2013-07-05 19:21:12) -- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml ( 26848 bytes, from 2015-01-13 23:55:57) -- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml ( 8253 bytes, from 2014-12-08 16:13:00) - -Copyright (C) 2013-2014 by the following authors: +- /local/mnt2/workspace2/sviau/envytools/rnndb/edp/edp.xml ( 10416 bytes, from 2015-04-30 16:35:50) +- /local/mnt2/workspace2/sviau/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-04-30 16:26:30) + +Copyright (C) 2013-2015 by the following authors: - Rob Clark robdclark@gmail.com (robclark)

Permission is hereby granted, free of charge, to any person obtaining @@ -288,5 +279,92 @@ static inline uint32_t REG_EDP_PHY_LN_PD_CTL(uint32_t i0) { return 0x00000404 +

#define REG_EDP_PHY_GLB_PHY_STATUS 0x00000598

+#define REG_EDP_28nm_PHY_PLL_REFCLK_CFG 0x00000000 + +#define REG_EDP_28nm_PHY_PLL_POSTDIV1_CFG 0x00000004 + +#define REG_EDP_28nm_PHY_PLL_CHGPUMP_CFG 0x00000008 + +#define REG_EDP_28nm_PHY_PLL_VCOLPF_CFG 0x0000000c + +#define REG_EDP_28nm_PHY_PLL_VREG_CFG 0x00000010 + +#define REG_EDP_28nm_PHY_PLL_PWRGEN_CFG 0x00000014 + +#define REG_EDP_28nm_PHY_PLL_DMUX_CFG 0x00000018 + +#define REG_EDP_28nm_PHY_PLL_AMUX_CFG 0x0000001c + +#define REG_EDP_28nm_PHY_PLL_GLB_CFG 0x00000020 +#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B 0x00000001 +#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B 0x00000002 +#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B 0x00000004 +#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE 0x00000008 + +#define REG_EDP_28nm_PHY_PLL_POSTDIV2_CFG 0x00000024 + +#define REG_EDP_28nm_PHY_PLL_POSTDIV3_CFG 0x00000028 + +#define REG_EDP_28nm_PHY_PLL_LPFR_CFG 0x0000002c + +#define REG_EDP_28nm_PHY_PLL_LPFC1_CFG 0x00000030 + +#define REG_EDP_28nm_PHY_PLL_LPFC2_CFG 0x00000034 + +#define REG_EDP_28nm_PHY_PLL_SDM_CFG0 0x00000038 + +#define REG_EDP_28nm_PHY_PLL_SDM_CFG1 0x0000003c + +#define REG_EDP_28nm_PHY_PLL_SDM_CFG2 0x00000040 + +#define REG_EDP_28nm_PHY_PLL_SDM_CFG3 0x00000044 + +#define REG_EDP_28nm_PHY_PLL_SDM_CFG4 0x00000048 + +#define REG_EDP_28nm_PHY_PLL_SSC_CFG0 0x0000004c + +#define REG_EDP_28nm_PHY_PLL_SSC_CFG1 0x00000050 + +#define REG_EDP_28nm_PHY_PLL_SSC_CFG2 0x00000054 + +#define REG_EDP_28nm_PHY_PLL_SSC_CFG3 0x00000058 + +#define REG_EDP_28nm_PHY_PLL_LKDET_CFG0 0x0000005c + +#define REG_EDP_28nm_PHY_PLL_LKDET_CFG1 0x00000060 + +#define REG_EDP_28nm_PHY_PLL_LKDET_CFG2 0x00000064 + +#define REG_EDP_28nm_PHY_PLL_TEST_CFG 0x00000068 +#define EDP_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET 0x00000001 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG0 0x0000006c + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG1 0x00000070 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG2 0x00000074 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG3 0x00000078 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG4 0x0000007c + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG5 0x00000080 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG6 0x00000084 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG7 0x00000088 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG8 0x0000008c + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG9 0x00000090 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG10 0x00000094 + +#define REG_EDP_28nm_PHY_PLL_CAL_CFG11 0x00000098 + +#define REG_EDP_28nm_PHY_PLL_EFUSE_CFG 0x0000009c + +#define REG_EDP_28nm_PHY_PLL_DEBUG_BUS_SEL 0x000000a0 +

#endif /* EDP_XML */ diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.xml.h b/drivers/gpu/drm/msm/hdmi/hdmi.xml.h index 3509887..4b82afc 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.xml.h +++ b/drivers/gpu/drm/msm/hdmi/hdmi.xml.h @@ -8,17 +8,8 @@ http://github.com/freedreno/envytools/ git clone https://github.com/freedreno/envytools.git

The rules-ng-ng source files this header was generated from are: -- /home/robclark/src/freedreno/envytools/rnndb/msm.xml ( 676 bytes, from 2014-12-05 15:34:49) -- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2013-03-31 16:51:27) -- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml ( 20908 bytes, from 2014-12-08 16:13:00) -- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml ( 2357 bytes, from 2014-12-08 16:13:00) -- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml ( 27208 bytes, from 2015-01-13 23:56:11) -- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml ( 11712 bytes, from 2013-08-17 17:13:43) -- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml ( 344 bytes, from 2013-08-11 19:26:32) -- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml ( 1686 bytes, from 2014-10-31 16:48:57) -- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml ( 600 bytes, from 2013-07-05 19:21:12) -- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml ( 26848 bytes, from 2015-01-13 23:55:57) -- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml ( 8253 bytes, from 2014-12-08 16:13:00) +- /local/mnt2/workspace2/sviau/envytools/rnndb/hdmi/hdmi.xml ( 29552 bytes, from 2015-04-30 16:36:13) +- /local/mnt2/workspace2/sviau/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-04-30 16:26:30)

Copyright (C) 2013-2015 by the following authors: - Rob Clark robdclark@gmail.com (robclark) @@ -750,5 +741,94 @@ static inline uint32_t HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(uint32_t val)

#define REG_HDMI_8x74_BIST_PATN3 0x00000048

+#define REG_HDMI_8x74_STATUS 0x0000005c +#define HDMI_8x74_STATUS_PHY_RDY 0x00000001 + +#define REG_HDMI_28nm_PHY_PLL_REFCLK_CFG 0x00000000 + +#define REG_HDMI_28nm_PHY_PLL_POSTDIV1_CFG 0x00000004 + +#define REG_HDMI_28nm_PHY_PLL_CHGPUMP_CFG 0x00000008 + +#define REG_HDMI_28nm_PHY_PLL_VCOLPF_CFG 0x0000000c + +#define REG_HDMI_28nm_PHY_PLL_VREG_CFG 0x00000010 + +#define REG_HDMI_28nm_PHY_PLL_PWRGEN_CFG 0x00000014 + +#define REG_HDMI_28nm_PHY_PLL_DMUX_CFG 0x00000018 + +#define REG_HDMI_28nm_PHY_PLL_AMUX_CFG 0x0000001c + +#define REG_HDMI_28nm_PHY_PLL_GLB_CFG 0x00000020 +#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B 0x00000001 +#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B 0x00000002 +#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B 0x00000004 +#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE 0x00000008 + +#define REG_HDMI_28nm_PHY_PLL_POSTDIV2_CFG 0x00000024 + +#define REG_HDMI_28nm_PHY_PLL_POSTDIV3_CFG 0x00000028 + +#define REG_HDMI_28nm_PHY_PLL_LPFR_CFG 0x0000002c + +#define REG_HDMI_28nm_PHY_PLL_LPFC1_CFG 0x00000030 + +#define REG_HDMI_28nm_PHY_PLL_LPFC2_CFG 0x00000034 + +#define REG_HDMI_28nm_PHY_PLL_SDM_CFG0 0x00000038 + +#define REG_HDMI_28nm_PHY_PLL_SDM_CFG1 0x0000003c + +#define REG_HDMI_28nm_PHY_PLL_SDM_CFG2 0x00000040 + +#define REG_HDMI_28nm_PHY_PLL_SDM_CFG3 0x00000044 + +#define REG_HDMI_28nm_PHY_PLL_SDM_CFG4 0x00000048 + +#define REG_HDMI_28nm_PHY_PLL_SSC_CFG0 0x0000004c + +#define REG_HDMI_28nm_PHY_PLL_SSC_CFG1 0x00000050 + +#define REG_HDMI_28nm_PHY_PLL_SSC_CFG2 0x00000054 + +#define REG_HDMI_28nm_PHY_PLL_SSC_CFG3 0x00000058 + +#define REG_HDMI_28nm_PHY_PLL_LKDET_CFG0 0x0000005c + +#define REG_HDMI_28nm_PHY_PLL_LKDET_CFG1 0x00000060 + +#define REG_HDMI_28nm_PHY_PLL_LKDET_CFG2 0x00000064 + +#define REG_HDMI_28nm_PHY_PLL_TEST_CFG 0x00000068 +#define HDMI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET 0x00000001 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG0 0x0000006c + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG1 0x00000070 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG2 0x00000074 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG3 0x00000078 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG4 0x0000007c + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG5 0x00000080 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG6 0x00000084 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG7 0x00000088 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG8 0x0000008c + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG9 0x00000090 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG10 0x00000094 + +#define REG_HDMI_28nm_PHY_PLL_CAL_CFG11 0x00000098 + +#define REG_HDMI_28nm_PHY_PLL_EFUSE_CFG 0x0000009c + +#define REG_HDMI_28nm_PHY_PLL_DEBUG_BUS_SEL 0x000000a0

#endif /* HDMI_XML */