hi all, i'm unable to have a working Radeon KMS framebuffer with an ATI FireGL V5600 on my YDL Powerstation and i'm obliged to use the old OpenFirmware fb.
That's from my dmesg [1]:
[...] vgaarb: device added: PCI:0000:f1:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:f1:00.0 [...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init [drm] radeon: finishing device. [TTM] Memory type 2 has not been initialized. radeon: probe of 0000:f1:00.0 failed with error -22
This is about the video card: root@radio:~# lspci 0000:f0:0b.0 PCI bridge: Apple Computer Inc. CPC945 PCIe Bridge 0000:f1:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV630GL [FireGL v5600] 0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev b0) 0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev b0) 0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0) 0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0) 0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0) 0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0) 0001:00:07.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 0001:00:08.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 0001:00:08.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 0001:01:01.0 RAID bus controller: IBM Obsidian chipset SCSI controller (rev 01) 0001:02:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 10) 0001:02:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 10) 0001:07:00.0 USB controller: Advanced Micro Devices [AMD] AMD-8111 USB OHCI (rev 0b) 0001:07:00.1 USB controller: Advanced Micro Devices [AMD] AMD-8111 USB OHCI (rev 0b) 0001:07:02.0 Serial controller: Exar Corp. XR17C/D152 Dual PCI UART (rev 02)
root@radio:~# lspci -nn|grep VGA 0000:f1:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV630GL [FireGL v5600] [1002:958c]
0000:f1:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV630GL [FireGL v5600] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0b02 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e8000000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 1000 [size=256] Expansion ROM at e8020000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel modules: radeon
thanks for your help, --nico
[1] http://cruxppc.org/~acrux/dmesg-kms
On Son, 2012-01-29 at 23:27 +0100, acrux wrote:
hi all, i'm unable to have a working Radeon KMS framebuffer with an ATI FireGL V5600 on my YDL Powerstation and i'm obliged to use the old OpenFirmware fb.
That's from my dmesg [1]:
[...] vgaarb: device added: PCI:0000:f1:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:f1:00.0 [...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init
Looks like there's a problem retrieving the card's ROM contents. Does rebuilding the kernel with CONFIG_VGA_ARB disabled make a difference?
On Mon, 30 Jan 2012 10:34:03 +0100 Michel Dänzer michel@daenzer.net wrote:
On Son, 2012-01-29 at 23:27 +0100, acrux wrote:
hi all, i'm unable to have a working Radeon KMS framebuffer with an ATI FireGL V5600 on my YDL Powerstation and i'm obliged to use the old OpenFirmware fb.
That's from my dmesg [1]:
[...] vgaarb: device added: PCI:0000:f1:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:f1:00.0 [...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init
Looks like there's a problem retrieving the card's ROM contents. Does rebuilding the kernel with CONFIG_VGA_ARB disabled make a difference?
hi Michel, thanks for your help but i'm unable to disable VGA_ARB 'cause it's automatically enabled. Can you suggest me a way to disable it? Here my kernel config: http://cruxppc.org/~acrux/config-kms
best, --nico
2012/1/30 acrux acrux_it@libero.it:
On Mon, 30 Jan 2012 10:34:03 +0100 Michel Dänzer michel@daenzer.net wrote:
On Son, 2012-01-29 at 23:27 +0100, acrux wrote:
hi all, i'm unable to have a working Radeon KMS framebuffer with an ATI FireGL V5600 on my YDL Powerstation and i'm obliged to use the old OpenFirmware fb.
That's from my dmesg [1]:
[...] vgaarb: device added: PCI:0000:f1:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:f1:00.0 [...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init
Looks like there's a problem retrieving the card's ROM contents. Does rebuilding the kernel with CONFIG_VGA_ARB disabled make a difference?
hi Michel, thanks for your help but i'm unable to disable VGA_ARB 'cause it's automatically enabled. Can you suggest me a way to disable it? Here my kernel config: http://cruxppc.org/~acrux/config-kms
Also make sure you enable PCI quirks.
Alex
best,
--nico
acrux acrux_it@libero.it _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
On Mon, 30 Jan 2012 08:58:28 -0500 Alex Deucher alexdeucher@gmail.com wrote:
_omissis__
hi Michel, thanks for your help but i'm unable to disable VGA_ARB 'cause it's automatically enabled. Can you suggest me a way to disable it? Here my kernel config: http://cruxppc.org/~acrux/config-kms
Also make sure you enable PCI quirks.
as you can read from my config it was already enabled (btw, it's automatically enabled too)
--nico
On Mon, 2012-01-30 at 14:03 +0100, acrux wrote:
On Mon, 30 Jan 2012 10:34:03 +0100 Michel Dänzer michel@daenzer.net wrote:
On Son, 2012-01-29 at 23:27 +0100, acrux wrote:
hi all, i'm unable to have a working Radeon KMS framebuffer with an ATI FireGL V5600 on my YDL Powerstation and i'm obliged to use the old OpenFirmware fb.
That's from my dmesg [1]:
[...] vgaarb: device added: PCI:0000:f1:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:f1:00.0 [...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init
Looks like there's a problem retrieving the card's ROM contents. Does rebuilding the kernel with CONFIG_VGA_ARB disabled make a difference?
hi Michel, thanks for your help but i'm unable to disable VGA_ARB 'cause it's automatically enabled. Can you suggest me a way to disable it? Here my kernel config: http://cruxppc.org/~acrux/config-kms
Might be due to VGA_ARB_MAX_GPUS, which depends on VGA_ARB. Try removing that from .config as well.
If that still doesn't work, please describe how exactly you're trying to disable VGA_ARB.
Michel Dänzer michel@daenzer.net writes:
On Mon, 2012-01-30 at 14:03 +0100, acrux wrote:
hi Michel, thanks for your help but i'm unable to disable VGA_ARB 'cause it's automatically enabled. Can you suggest me a way to disable it? Here my kernel config: http://cruxppc.org/~acrux/config-kms
Might be due to VGA_ARB_MAX_GPUS, which depends on VGA_ARB. Try removing that from .config as well.
If that still doesn't work, please describe how exactly you're trying to disable VGA_ARB.
You need to enable CONFIG_EXPERT to be able to toggle VGA_ARB.
Andreas.
On Mon, 30 Jan 2012 16:10:03 +0100 Andreas Schwab schwab@linux-m68k.org wrote:
Michel Dänzer michel@daenzer.net writes:
On Mon, 2012-01-30 at 14:03 +0100, acrux wrote:
hi Michel, thanks for your help but i'm unable to disable VGA_ARB 'cause it's automatically enabled. Can you suggest me a way to disable it? Here my kernel config: http://cruxppc.org/~acrux/config-kms
Might be due to VGA_ARB_MAX_GPUS, which depends on VGA_ARB. Try removing that from .config as well.
If that still doesn't work, please describe how exactly you're trying to disable VGA_ARB.
You need to enable CONFIG_EXPERT to be able to toggle VGA_ARB.
Andreas.
oh, shame on me! That was the trick. Thank you Andreas.
--nico
On Mon, 30 Jan 2012 10:34:03 +0100 Michel Dänzer michel@daenzer.net wrote:
On Son, 2012-01-29 at 23:27 +0100, acrux wrote:
hi all, i'm unable to have a working Radeon KMS framebuffer with an ATI FireGL V5600 on my YDL Powerstation and i'm obliged to use the old OpenFirmware fb.
That's from my dmesg [1]:
[...] vgaarb: device added: PCI:0000:f1:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:f1:00.0 [...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init
Looks like there's a problem retrieving the card's ROM contents. Does rebuilding the kernel with CONFIG_VGA_ARB disabled make a difference?
again without radeon kms and the problems is still here.. more a good numbers of straces for another different cause. http://cruxppc.org/~acrux/config-kms2 http://cruxppc.org/~acrux/dmesg-kms2
[...] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV630 0x1002:0x958C 0x1002:0x0B02). radeon 0000:f1:00.0: Using 32-bit DMA via iommu [drm] register mmio base: 0xE8000000 [drm] register mmio size: 65536 radeon 0000:f1:00.0: Invalid ROM contents radeon 0000:f1:00.0: Expecting atombios for R600 GPU radeon 0000:f1:00.0: Fatal error during GPU init [drm] radeon: finishing device. [TTM] Memory type 2 has not been initialized. radeon: probe of 0000:f1:00.0 failed with error -22
best, --nico
dri-devel@lists.freedesktop.org
-
acrux -
Alex Deucher -
Andreas Schwab -
Michel Dänzer