Moin,

[1.] One line summary of the problem:

Both screens stay blank during boot with 3.8.3.

[2.] Full description of the problem/report:

When booting the screens go blank soon after showing the grub menu. Starting X11 does not bring the screens up either. In /var/log/dmesg two lines appear (diff -u):

@@ -432,8 +434,10 @@ [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem +i915 0000:00:02.0: No connectors reported connected with modes +[drm] Cannot find any crtc or sizes - going 1024x768 fbcon: inteldrmfb (fb0) is primary device -Console: switching to colour frame buffer device 240x75 +Console: switching to colour frame buffer device 128x48 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier i915: No ACPI video bus found

Most info below is obtained after booting 3.8.2.

$ xrandr Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192 HDMI1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 VGA1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) HDMI2 connected 1920x1200+1920+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 60.0 DP2 disconnected (normal left inverted right x axis y axis)

[3.] Keywords (i.e., modules, networking, kernel):

drm/i915

[4.] Kernel information

3.8.3

[4.2.] Kernel .config file:

# # Automatically generated file; DO NOT EDIT. # Linux/x86_64 3.8.3 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y

# # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="-amd64" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y # CONFIG_KERNEL_GZIP is not set CONFIG_KERNEL_BZIP2=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set CONFIG_DEFAULT_HOSTNAME="blaulicht" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_FHANDLE=y # CONFIG_AUDIT is not set CONFIG_HAVE_GENERIC_HARDIRQS=y

# # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y

# # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y

# # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set

# # RCU Subsystem # CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y # CONFIG_RCU_USER_QS is not set CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_BOOST is not set # CONFIG_RCU_NOCB_CPU is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y # CONFIG_CGROUPS is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EXPERT is not set CONFIG_HAVE_UID16=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y

# # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y # CONFIG_KPROBES is not set # CONFIG_JUMP_LABEL is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_GENERIC_SIGALTSTACK=y

# # GCOV-based kernel profiling # # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set

# # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_BLOCK_COMPAT=y

# # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set

# # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y # CONFIG_X86_MPPARSE is not set # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y # CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y # CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=y # CONFIG_CLEANCACHE is not set # CONFIG_FRONTSWAP is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 # CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

# # Power management and ACPI options # # CONFIG_SUSPEND is not set # CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_ACPI=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_EC_DEBUGFS is not set # CONFIG_ACPI_PROC_EVENT is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_I2C=y CONFIG_ACPI_PROCESSOR=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # CONFIG_ACPI_HED is not set # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set

# # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

# # x86 CPU frequency scaling drivers # # CONFIG_X86_PCC_CPUFREQ is not set CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_ACPI_CPUFREQ_CPB is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set

# # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y

# # Memory power savings # # CONFIG_I7300_IDLE is not set

# # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y # CONFIG_PCIEAER is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y # CONFIG_PCI_IOV is not set # CONFIG_PCI_PRI is not set # CONFIG_PCI_PASID is not set CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_RAPIDIO is not set

# # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set # CONFIG_X86_X32 is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y

# # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_XFRM=y CONFIG_XFRM_ALGO=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_NET_IPVTI is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_INET_UDP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m # CONFIG_TCP_CONG_HSTCP is not set # CONFIG_TCP_CONG_HYBLA is not set # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y # CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set

# # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y

# # Device Drivers #

# # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_DMA_SHARED_BUFFER=y

# # Bus devices # # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set

# # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set

# # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_INTEL_MID_PTI is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_VMWARE_BALLOON is not set # CONFIG_BMP085_I2C is not set # CONFIG_PCH_PHUB is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_C2PORT is not set

# # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set

# # Texas Instruments shared transport line discipline # # CONFIG_SENSORS_LIS3_I2C is not set

# # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set

# # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set

# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set

# # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y # CONFIG_SATA_PMP is not set

# # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y

# # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y

# # SATA SFF controllers with BMDMA # # CONFIG_ATA_PIIX is not set # CONFIG_SATA_HIGHBANK is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set

# # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_JMICRON=y # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set

# # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_RZ1000 is not set

# # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y # CONFIG_MULTICORE_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # CONFIG_TARGET_CORE is not set # CONFIG_FUSION is not set

# # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_FC is not set CONFIG_MII=y # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set

# # CAIF transport drivers #

# # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_ALTEON is not set # CONFIG_NET_VENDOR_AMD is not set CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set # CONFIG_ATL1 is not set CONFIG_ATL1E=y # CONFIG_ATL1C is not set # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROCADE is not set # CONFIG_NET_CALXEDA_XGMAC is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CISCO is not set # CONFIG_DNET is not set # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set # CONFIG_NET_VENDOR_EXAR is not set # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_IXGB is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set CONFIG_NET_VENDOR_I825XX=y # CONFIG_ZNET is not set # CONFIG_IP1000 is not set # CONFIG_JME is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MYRI is not set # CONFIG_FEALNX is not set CONFIG_NET_VENDOR_NATSEMI=y # CONFIG_NATSEMI is not set # CONFIG_NS83820 is not set CONFIG_NET_VENDOR_8390=y CONFIG_NE2K_PCI=m # CONFIG_NET_VENDOR_NVIDIA is not set # CONFIG_NET_VENDOR_OKI is not set # CONFIG_ETHOC is not set # CONFIG_NET_PACKET_ENGINE is not set # CONFIG_NET_VENDOR_QLOGIC is not set # CONFIG_NET_VENDOR_REALTEK is not set # CONFIG_NET_VENDOR_RDC is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set # CONFIG_SFC is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set # CONFIG_PHYLIB is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set

# # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_CDC_NCM is not set # CONFIG_USB_NET_CDC_MBIM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC75XX is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET=y # CONFIG_USB_ALI_M5632 is not set # CONFIG_USB_AN2720 is not set # CONFIG_USB_BELKIN is not set CONFIG_USB_ARMLINUX=y # CONFIG_USB_EPSON2888 is not set # CONFIG_USB_KC2190 is not set # CONFIG_USB_NET_ZAURUS is not set # CONFIG_USB_NET_CX82310_ETH is not set # CONFIG_USB_NET_KALMIA is not set # CONFIG_USB_NET_QMI_WWAN is not set # CONFIG_USB_NET_INT51X1 is not set # CONFIG_USB_IPHETH is not set # CONFIG_USB_SIERRA_NET is not set # CONFIG_USB_VL600 is not set # CONFIG_WLAN is not set

# # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set

# # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set

# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1920 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set

# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_ZHENHUA is not set # CONFIG_JOYSTICK_AS5011 is not set # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_ACECAD is not set CONFIG_TABLET_USB_AIPTEK=y # CONFIG_TABLET_USB_GTCO is not set # CONFIG_TABLET_USB_HANWANG is not set # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set

# # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_GAMEPORT is not set

# # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_DEVKMEM=y

# # Serial drivers # CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_PNP=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set

# # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=m # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_PCH_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y

# # I2C Hardware Bus support #

# # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set

# # ACPI drivers # # CONFIG_I2C_SCMI is not set

# # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set

# # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set

# # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # CONFIG_HSI is not set

# # PPS support # # CONFIG_PPS is not set

# # PPS generators support #

# # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set

# # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_AVS is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set

# # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_K10TEMP is not set # CONFIG_SENSORS_FAM15H_POWER is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_CORETEMP=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_APPLESMC is not set

# # ACPI drivers # # CONFIG_SENSORS_ACPI_POWER is not set # CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_FAIR_SHARE is not set CONFIG_STEP_WISE=y # CONFIG_USER_SPACE is not set # CONFIG_CPU_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y

# # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y

# # Broadcom specific AMBA # # CONFIG_BCMA is not set

# # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_RTSX_PCI is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_LM3533 is not set # CONFIG_TPS6105X is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_SMSC is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_CS5535 is not set # CONFIG_LPC_SCH is not set CONFIG_LPC_ICH=y # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_PALMAS is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_AS3711 is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y

# # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y # CONFIG_MEDIA_CONTROLLER is not set CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_DVB_CORE=y # CONFIG_DVB_NET is not set CONFIG_DVB_MAX_ADAPTERS=2 # CONFIG_DVB_DYNAMIC_MINORS is not set

# # Media drivers # CONFIG_RC_CORE=y CONFIG_RC_MAP=m CONFIG_RC_DECODERS=y CONFIG_LIRC=m CONFIG_IR_LIRC_CODEC=m CONFIG_IR_NEC_DECODER=m CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m CONFIG_IR_JVC_DECODER=m CONFIG_IR_SONY_DECODER=m CONFIG_IR_RC5_SZ_DECODER=m CONFIG_IR_SANYO_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m # CONFIG_RC_DEVICES is not set CONFIG_MEDIA_USB_SUPPORT=y

# # Webcam devices # CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y # CONFIG_USB_GSPCA is not set # CONFIG_USB_PWC is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set # CONFIG_USB_SN9C102 is not set

# # Analog/digital TV USB devices # # CONFIG_VIDEO_CX231XX is not set # CONFIG_VIDEO_TM6000 is not set

# # Digital TV USB devices # CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set # CONFIG_DVB_USB_A800 is not set CONFIG_DVB_USB_DIBUSB_MB=m # CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set CONFIG_DVB_USB_DIBUSB_MC=m CONFIG_DVB_USB_DIB0700=m # CONFIG_DVB_USB_UMT_010 is not set # CONFIG_DVB_USB_CXUSB is not set # CONFIG_DVB_USB_M920X is not set # CONFIG_DVB_USB_DIGITV is not set # CONFIG_DVB_USB_VP7045 is not set # CONFIG_DVB_USB_VP702X is not set # CONFIG_DVB_USB_GP8PSK is not set CONFIG_DVB_USB_NOVA_T_USB2=m # CONFIG_DVB_USB_TTUSB2 is not set # CONFIG_DVB_USB_DTT200U is not set # CONFIG_DVB_USB_OPERA1 is not set # CONFIG_DVB_USB_AF9005 is not set # CONFIG_DVB_USB_PCTV452E is not set # CONFIG_DVB_USB_DW2102 is not set # CONFIG_DVB_USB_CINERGY_T2 is not set # CONFIG_DVB_USB_DTV5100 is not set # CONFIG_DVB_USB_FRIIO is not set # CONFIG_DVB_USB_AZ6027 is not set # CONFIG_DVB_USB_TECHNISAT_USB2 is not set CONFIG_DVB_USB_V2=m # CONFIG_DVB_USB_CYPRESS_FIRMWARE is not set # CONFIG_DVB_USB_AF9015 is not set # CONFIG_DVB_USB_AF9035 is not set # CONFIG_DVB_USB_ANYSEE is not set # CONFIG_DVB_USB_AU6610 is not set # CONFIG_DVB_USB_AZ6007 is not set # CONFIG_DVB_USB_CE6230 is not set # CONFIG_DVB_USB_EC168 is not set # CONFIG_DVB_USB_GL861 is not set # CONFIG_DVB_USB_IT913X is not set # CONFIG_DVB_USB_LME2510 is not set # CONFIG_DVB_USB_MXL111SF is not set # CONFIG_DVB_USB_RTL28XXU is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_SMS_USB_DRV is not set # CONFIG_DVB_B2C2_FLEXCOP_USB is not set

# # Webcam, TV (analog/digital) USB devices # # CONFIG_VIDEO_EM28XX is not set # CONFIG_MEDIA_PCI_SUPPORT is not set # CONFIG_V4L_PLATFORM_DRIVERS is not set # CONFIG_V4L_MEM2MEM_DRIVERS is not set # CONFIG_V4L_TEST_DRIVERS is not set

# # Supported MMC/SDIO adapters # CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_USB_DSBR is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_SHARK is not set # CONFIG_RADIO_SHARK2 is not set # CONFIG_I2C_SI4713 is not set # CONFIG_RADIO_SI4713 is not set # CONFIG_USB_KEENE is not set # CONFIG_RADIO_TEA5764 is not set # CONFIG_RADIO_SAA7706H is not set # CONFIG_RADIO_TEF6862 is not set # CONFIG_RADIO_WL1273 is not set

# # Texas Instruments WL128x FM driver (ST based) # CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

# # Media ancillary drivers (tuners, sensors, i2c, frontends) # CONFIG_VIDEO_IR_I2C=y

# # Audio decoders, processors and mixers #

# # RDS decoders #

# # Video decoders #

# # Video and audio decoders #

# # MPEG video encoders #

# # Video encoders #

# # Camera sensor devices #

# # Flash devices #

# # Video improvement chips #

# # Miscelaneous helper chips #

# # Sensors used on soc_camera driver # CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA827X=y CONFIG_MEDIA_TUNER_TDA18271=y CONFIG_MEDIA_TUNER_TDA9887=y CONFIG_MEDIA_TUNER_TEA5761=y CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y CONFIG_MEDIA_TUNER_XC4000=y CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=y

# # Multistandard (satellite) frontends #

# # Multistandard (cable + terrestrial) frontends #

# # DVB-S (satellite) frontends #

# # DVB-T (terrestrial) frontends # CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m

# # DVB-C (cable) frontends #

# # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_LGDT3305=m CONFIG_DVB_S5H1411=m

# # ISDB-T (terrestrial) frontends # CONFIG_DVB_DIB8000=m

# # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_TUNER_DIB0090=m

# # SEC control devices for DVB-S #

# # Tools to develop new frontends # # CONFIG_DVB_DUMMY_FE is not set

# # Graphics support # CONFIG_AGP=y # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_VGA_SWITCHEROO is not set CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_NOUVEAU is not set

# # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_DRM_VMWGFX is not set # CONFIG_DRM_GMA500 is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set # CONFIG_DRM_CIRRUS_QEMU is not set # CONFIG_STUB_POULSBO is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_WMT_GE_ROPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set

# # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set # CONFIG_EXYNOS_VIDEO is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y # CONFIG_BACKLIGHT_APPLE is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3630 is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_LP855X is not set

# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=y CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set # CONFIG_SND_DUMMY is not set # CONFIG_SND_ALOOP is not set CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ASIHPI is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=y CONFIG_SND_HDA_PREALLOC_SIZE=64 CONFIG_SND_HDA_HWDEP=y # CONFIG_SND_HDA_RECONFIG is not set # CONFIG_SND_HDA_INPUT_BEEP is not set CONFIG_SND_HDA_INPUT_JACK=y # CONFIG_SND_HDA_PATCH_LOADER is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CA0132=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_US122L is not set # CONFIG_SND_USB_6FIRE is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set

# # HID support # CONFIG_HID=y # CONFIG_HIDRAW is not set # CONFIG_UHID is not set CONFIG_HID_GENERIC=y

# # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y # CONFIG_HID_PRODIKEYS is not set CONFIG_HID_CYPRESS=y # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set CONFIG_HID_EZKEY=y # CONFIG_HID_HOLTEK is not set # CONFIG_HID_KEYTOUCH is not set CONFIG_HID_KYE=y # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set CONFIG_HID_LOGITECH=y CONFIG_HID_LOGITECH_DJ=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set

# # USB HID support # CONFIG_USB_HID=y # CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y

# # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_ARCH_HAS_XHCI=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

# # Miscellaneous USB options # # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB_CBAF is not set

# # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_PCI=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_EHCI_HCD_PLATFORM is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_CHIPIDEA is not set

# # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set

# # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

# # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set

# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set

# # USB port drivers # CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_F81232 is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_METRO is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set # CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_ZTE is not set # CONFIG_USB_SERIAL_SSU100 is not set # CONFIG_USB_SERIAL_QT2 is not set # CONFIG_USB_SERIAL_DEBUG is not set

# # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set

# # USB Physical Layer drivers # # CONFIG_USB_ISP1301 is not set # CONFIG_USB_RCAR_PHY is not set # CONFIG_USB_GADGET is not set

# # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set

# # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set

# # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set

# # SPI RTC drivers #

# # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_DS2404 is not set

# # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_VFIO is not set

# # Virtio drivers # # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_MMIO is not set

# # Microsoft Hyper-V guest support # # CONFIG_HYPERV is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set

# # Hardware Spinlock drivers # CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y # CONFIG_AMD_IOMMU is not set CONFIG_DMAR_TABLE=y CONFIG_INTEL_IOMMU=y CONFIG_INTEL_IOMMU_DEFAULT_ON=y CONFIG_INTEL_IOMMU_FLOPPY_WA=y # CONFIG_IRQ_REMAP is not set

# # Remoteproc drivers (EXPERIMENTAL) # # CONFIG_STE_MODEM_RPROC is not set

# # Rpmsg drivers (EXPERIMENTAL) # # CONFIG_VIRT_DRIVERS is not set # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set # CONFIG_VME_BUS is not set # CONFIG_PWM is not set # CONFIG_IPACK_BUS is not set

# # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_DMI_SYSFS is not set # CONFIG_ISCSI_IBFT_FIND is not set # CONFIG_GOOGLE_FIRMWARE is not set

# # File systems # CONFIG_DCACHE_WORD_ACCESS=y # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=y # CONFIG_EXT4_USE_FOR_EXT23 is not set # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y # CONFIG_CUSE is not set

# # Caches # CONFIG_FSCACHE=y # CONFIG_FSCACHE_STATS is not set # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set # CONFIG_FSCACHE_OBJECT_LIST is not set # CONFIG_CACHEFILES is not set

# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y

# # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=850 CONFIG_FAT_DEFAULT_IOCHARSET="utf8" # CONFIG_NTFS_FS is not set

# # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_F2FS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_SWAP is not set # CONFIG_NFS_FSCACHE is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG is not set # CONFIG_CIFS_SMB2 is not set # CONFIG_CIFS_FSCACHE is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=y CONFIG_DLM=y # CONFIG_DLM_DEBUG is not set

# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_VERBOSE is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_TEST_KSTRTOX is not set # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_DEBUG_SET_MODULE_RONX is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_OPTIMIZE_INLINING is not set

# # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_INTEL_TXT is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_ASYNC_PQ=y CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y

# # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set

# # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set

# # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set

# # Hash modes # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set

# # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32C_INTEL is not set # CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA1_SSSE3 is not set CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

# # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

# # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set

# # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set

# # Library routines # CONFIG_RAID6_PQ=y CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_PERCPU_RWSEM=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y # CONFIG_CRC8 is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y # CONFIG_XZ_DEC is not set # CONFIG_XZ_DEC_BCJ is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y # CONFIG_AVERAGE is not set # CONFIG_CORDIC is not set # CONFIG_DDR is not set

[5.] Most recent kernel version which did not have the bug:

3.8.2 with identical .config

[8.1.] Software (add the output of the ver_linux script here)

Debian sid

$ scripts/ver_linux

Linux blaulicht 3.8.2-amd64 #18 SMP PREEMPT Mon Mar 4 14:07:04 CET 2013 x86_64 GNU/Linux

Gnu C 4.7 Gnu make 3.81 binutils 2.22 util-linux 2.20.1 mount support module-init-tools 9 e2fsprogs 1.42.5 Linux C Library 2.13 Dynamic linker (ldd) 2.13 Procps 3.3.4 Net-tools 1.60 Kbd 1.15.5 Sh-utils 8.13 Modules Loaded dvb_usb_dib0700 dib8000 dib0070 dib7000m dib7000p dib0090 dib3000mc dibx000_common dvb_usb ne2k_pci 8390

[8.2.] Processor information (from /proc/cpuinfo):

# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping : 11 microcode : 0xb6 cpu MHz : 2336.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi flexpriority bogomips : 4666.43 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping : 11 microcode : 0xb6 cpu MHz : 2336.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi flexpriority bogomips : 4666.43 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

[8.3.] Module information (from /proc/modules):

# cat /proc/modules dvb_usb_dib0700 136511 0 - Live 0xffffffffa004d000 dib8000 39252 1 dvb_usb_dib0700, Live 0xffffffffa003f000 dib0070 7698 2 dvb_usb_dib0700, Live 0xffffffffa003a000 dib7000m 14703 1 dvb_usb_dib0700, Live 0xffffffffa0033000 dib7000p 26596 2 dvb_usb_dib0700, Live 0xffffffffa0028000 dib0090 24013 1 dvb_usb_dib0700, Live 0xffffffffa001e000 dib3000mc 12181 1 dvb_usb_dib0700, Live 0xffffffffa0018000 dibx000_common 6678 5 dvb_usb_dib0700,dib8000,dib7000m,dib7000p,dib3000mc, Live 0xffffffffa0013000 dvb_usb 16378 1 dvb_usb_dib0700, Live 0xffffffffa000b000 ne2k_pci 6318 0 - Live 0xffffffffa0005000 8390 6913 1 ne2k_pci, Live 0xffffffffa0000000

[8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

# cat /proc/ioports 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0290-0297 : pnp 00:05 03c0-03df : vga+ 0400-041f : 0000:00:1f.3 04d0-04d1 : pnp 00:06 0500-057f : pnp 00:06 0800-087f : pnp 00:06 0800-0803 : ACPI PM1a_EVT_BLK 0804-0805 : ACPI PM1a_CNT_BLK 0808-080b : ACPI PM_TMR 0810-0815 : ACPI CPU throttle 0820-082f : ACPI GPE0_BLK 0830-0833 : iTCO_wdt 0850-0850 : ACPI PM2_CNT_BLK 0860-087f : iTCO_wdt 0cf8-0cff : PCI conf1 0d00-ffff : PCI Bus 0000:00 1000-1fff : PCI Bus 0000:03 a080-a09f : 0000:00:1f.2 a080-a09f : ahci a400-a403 : 0000:00:1f.2 a400-a403 : ahci a480-a487 : 0000:00:1f.2 a480-a487 : ahci a800-a803 : 0000:00:1f.2 a800-a803 : ahci a880-a887 : 0000:00:1f.2 a880-a887 : ahci b000-b01f : 0000:00:1d.0 b000-b01f : uhci_hcd b080-b09f : 0000:00:1d.1 b080-b09f : uhci_hcd b400-b41f : 0000:00:1d.2 b400-b41f : uhci_hcd b480-b49f : 0000:00:1a.0 b480-b49f : uhci_hcd b800-b81f : 0000:00:1a.1 b800-b81f : uhci_hcd b880-b89f : 0000:00:1a.2 b880-b89f : uhci_hcd bc00-bc07 : 0000:00:02.0 c000-cfff : PCI Bus 0000:01 cc00-cc7f : 0000:01:00.0 cc00-cc7f : ATL1E d000-dfff : PCI Bus 0000:02 d400-d40f : 0000:02:00.0 d400-d40f : pata_jmicron d480-d483 : 0000:02:00.0 d480-d483 : pata_jmicron d800-d807 : 0000:02:00.0 d800-d807 : pata_jmicron d880-d883 : 0000:02:00.0 d880-d883 : pata_jmicron dc00-dc07 : 0000:02:00.0 dc00-dc07 : pata_jmicron e000-efff : PCI Bus 0000:04 ec00-ec1f : 0000:04:01.0 ec00-ec1f : ne2k-pci

# cat /proc/iomem 00000000-0000ffff : reserved 00010000-0009ebff : System RAM 0009ec00-0009ffff : reserved 000a0000-000bffff : PCI Bus 0000:00 000c0000-000c7fff : Video ROM 000d0000-000dffff : PCI Bus 0000:00 000e4000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-c7d7ffff : System RAM 01000000-015ed8bc : Kernel code 015ed8bd-01864bff : Kernel data 018f4000-01969fff : Kernel bss c7d80000-c7d8dfff : ACPI Tables c7d8e000-c7dcffff : ACPI Non-volatile Storage c7dd0000-c7dfffff : reserved c7e00000-ffffffff : PCI Bus 0000:00 c7e00000-c81fffff : PCI Bus 0000:03 c8200000-c83fffff : PCI Bus 0000:02 c8400000-c85fffff : PCI Bus 0000:01 c8600000-c8600fff : Intel Flush Page d0000000-dfffffff : 0000:00:02.0 e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff] e0000000-efffffff : pnp 00:0b fdf00000-fdffffff : PCI Bus 0000:03 fe400000-fe7fffff : 0000:00:02.0 fe8f4000-fe8f7fff : 0000:00:1b.0 fe8f4000-fe8f7fff : ICH HD audio fe8f8000-fe8f87ff : 0000:00:1f.2 fe8f8000-fe8f87ff : ahci fe8f9000-fe8f90ff : 0000:00:1f.3 fe8fa000-fe8fa3ff : 0000:00:1d.7 fe8fa000-fe8fa3ff : ehci_hcd fe8fb000-fe8fb3ff : 0000:00:1a.7 fe8fb000-fe8fb3ff : ehci_hcd fe900000-fe9fffff : 0000:00:02.1 fea00000-feafffff : PCI Bus 0000:01 feac0000-feafffff : 0000:01:00.0 feac0000-feafffff : ATL1E feb00000-febfffff : PCI Bus 0000:02 febf0000-febfffff : 0000:02:00.0 fec00000-fec003ff : IOAPIC 0 fed00000-fed003ff : HPET 0 fed08000-fed08fff : pnp 00:06 fed14000-fed19fff : pnp 00:00 fed1c000-fed1ffff : pnp 00:06 fed1f410-fed1f414 : iTCO_wdt fed20000-fed3ffff : pnp 00:06 fed50000-fed8ffff : pnp 00:06 fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved fee00000-fee00fff : pnp 00:0a ffc00000-ffefffff : pnp 00:09 fff00000-ffffffff : reserved 100000000-12fffffff : System RAM

[8.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8336 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8336 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at bc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41d1 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915

00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8336 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b480 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b800 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd

00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b880 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Len=06 <?> Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: ASUSTeK Computer Inc. Device 837b Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4142 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: c7e00000-c81fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41a1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000c8200000-00000000c83fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41b1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=05 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport

00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000c8400000-00000000c85fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41c1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=06 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b000 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b080 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b400 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Len=06 <?> Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4

00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at a880 [size=8] Region 1: I/O ports at a800 [size=4] Region 2: I/O ports at a480 [size=8] Region 3: I/O ports at a400 [size=4] Region 4: I/O ports at a080 [size=32] Region 5: Memory at fe8f8000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee0300c Data: 41e1 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] Vendor Specific Information: Len=06 <?> Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8f9000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 831c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4152 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-e5-cb-ad-e0-cb-4e-ff Kernel driver in use: ATL1E

02:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 827e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Expansion ROM at febf0000 [disabled] [size=64K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel driver in use: pata_jmicron

04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at ec00 [size=32] Kernel driver in use: ne2k-pci

[8.7.] Other information that might be relevant to the problem

Linux version 3.8.3-amd64 (stephan@blaulicht) (gcc version 4.7.2 (Debian 4.7.2-5) ) #19 SMP PREEMPT Thu Mar 14 21:50:01 CET 2013 Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3-amd64 root=/dev/md1 ro e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7d7ffff] usable BIOS-e820: [mem 0x00000000c7d80000-0x00000000c7d8dfff] ACPI data BIOS-e820: [mem 0x00000000c7d8e000-0x00000000c7dcffff] ACPI NVS BIOS-e820: [mem 0x00000000c7dd0000-0x00000000c7dfffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.5 present. DMI: System manufacturer System Product Name/P5G43T-M PRO, BIOS 0211 09/01/2009 e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable No AGP bridge found e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FE0000000 write-back 2 base 120000000 mask FF0000000 write-back 3 base 0D0000000 mask FF0000000 uncachable 4 base 0E0000000 mask FE0000000 uncachable 5 base 0C7E00000 mask FFFE00000 uncachable 6 base 0C8000000 mask FF8000000 uncachable 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820: update [mem 0xc7e00000-0xffffffff] usable ==> reserved e820: last_pfn = 0xc7d80 max_arch_pfn = 0x400000000 initial memory mapped: [mem 0x00000000-0x1fffffff] Base memory trampoline at [ffff880000098000] 98000 size 24576 init_memory_mapping: [mem 0x00000000-0xc7d7ffff] [mem 0x00000000-0xc7bfffff] page 2M [mem 0xc7c00000-0xc7d7ffff] page 4k kernel direct mapping tables up to 0xc7d7ffff @ [mem 0x1fffa000-0x1fffffff] init_memory_mapping: [mem 0x100000000-0x12fffffff] [mem 0x100000000-0x12fffffff] page 2M kernel direct mapping tables up to 0x12fffffff @ [mem 0xc7d7e000-0xc7d7ffff] ACPI: RSDP 00000000000fb970 00024 (v02 ACPIAM) ACPI: XSDT 00000000c7d80100 00064 (v01 A_M_I_ OEMXSDT 09000901 MSFT 00000097) ACPI: FACP 00000000c7d80290 000F4 (v03 A_M_I_ OEMFACP 09000901 MSFT 00000097) ACPI: DSDT 00000000c7d80440 08E12 (v01 A1435 A1435001 00000001 INTL 20060113) ACPI: FACS 00000000c7d8e000 00040 ACPI: APIC 00000000c7d80390 0006C (v01 A_M_I_ OEMAPIC 09000901 MSFT 00000097) ACPI: MCFG 00000000c7d80400 0003C (v01 A_M_I_ OEMMCFG 09000901 MSFT 00000097) ACPI: OEMB 00000000c7d8e040 00081 (v01 A_M_I_ AMI_OEM 09000901 MSFT 00000097) ACPI: HPET 00000000c7d89260 00038 (v01 A_M_I_ OEMHPET 09000901 MSFT 00000097) ACPI: GSCI 00000000c7d8e0d0 02024 (v01 A_M_I_ GMCHSCI 09000901 MSFT 00000097) ACPI: OSFR 00000000c7d892a0 000B0 (v01 A_M_I_ OEMOSFR 09000901 MSFT 00000097) ACPI: SSDT 00000000c7d90500 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b800000-ffff88012effffff] on node 0 Zone ranges: DMA [mem 0x00010000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x12fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00010000-0x0009dfff] node 0: [mem 0x00100000-0xc7d7ffff] node 0: [mem 0x100000000-0x12fffffff] On node 0 totalpages: 1015054 DMA zone: 56 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 11136 pages used for memmap DMA32 zone: 803328 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 smpboot: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 e820: [mem 0xc7e00000-0xfedfffff] available for PCI devices setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88012fc00000 s73408 r8192 d20800 u1048576 pcpu-alloc: s73408 r8192 d20800 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001168 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3-amd64 root=/dev/md1 ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) __ex_table already sorted, skipping sort Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3920712k/4980736k available (6071k kernel code, 920520k absent, 139504k reserved, 2523k data, 544k init) Preemptible hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 Dump stacks of tasks blocking RCU-preempt GP. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2333.091 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.18 BogoMIPS (lpj=2333091) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) process: using mwait in idle threads Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 Freeing SMP alternatives: 24k freed ACPI: Core revision 20121018 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (fam: 06, model: 0f, stepping: 0b) APIC calibration not consistent with PM-Timer: 119ms instead of 100ms APIC delta adjusted to PM-Timer: 2083328 (2499960) Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. perf_event_intel: PEBS disabled due to CPU errata ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 smpboot: Booting Node 0, Processors #1 OK Brought up 2 CPUs smpboot: Total of 2 processors activated (9332.36 BogoMIPS) devtmpfs: initialized xor: automatically using best checksumming function: generic_sse: 8596.000 MB/sec NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 raid6: sse2x1 4179 MB/s raid6: sse2x2 4750 MB/s raid6: sse2x4 6964 MB/s raid6: using algorithm sse2x4 (6964 MB/s) raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 00000000c7d90100 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113) ACPI: SSDT 00000000c7d90300 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xc7e00000-0xffffffff] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 DMAR: Forcing write-buffer flush capability DMAR: Disabling IOMMU for graphics on this chipset pci 0000:00:02.0: [8086:2e22] type 00 class 0x030000 pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0xbc00-0xbc07] pci 0000:00:02.1: [8086:2e23] type 00 class 0x038000 pci 0000:00:02.1: reg 10: [mem 0xfe900000-0xfe9fffff 64bit] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 pci 0000:00:1a.0: reg 20: [io 0xb480-0xb49f] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 pci 0000:00:1a.1: reg 20: [io 0xb800-0xb81f] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 pci 0000:00:1a.2: reg 20: [io 0xb880-0xb89f] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 pci 0000:00:1a.7: reg 10: [mem 0xfe8fb000-0xfe8fb3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 pci 0000:00:1b.0: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 20: [io 0xb000-0xb01f] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 20: [io 0xb080-0xb09f] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 10: [mem 0xfe8fa000-0xfe8fa3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100 pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 pci 0000:00:1f.2: reg 10: [io 0xa880-0xa887] pci 0000:00:1f.2: reg 14: [io 0xa800-0xa803] pci 0000:00:1f.2: reg 18: [io 0xa480-0xa487] pci 0000:00:1f.2: reg 1c: [io 0xa400-0xa403] pci 0000:00:1f.2: reg 20: [io 0xa080-0xa09f] pci 0000:00:1f.2: reg 24: [mem 0xfe8f8000-0xfe8f87ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 10: [mem 0xfe8f9000-0xfe8f90ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:00:1c.0: PCI bridge to [bus 03] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185 pci 0000:02:00.0: reg 10: [io 0xdc00-0xdc07] pci 0000:02:00.0: reg 14: [io 0xd880-0xd883] pci 0000:02:00.0: reg 18: [io 0xd800-0xd807] pci 0000:02:00.0: reg 1c: [io 0xd480-0xd483] pci 0000:02:00.0: reg 20: [io 0xd400-0xd40f] pci 0000:02:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref] pci 0000:00:1c.4: PCI bridge to [bus 02] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:01:00.0: [1969:1026] type 00 class 0x020000 pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit] pci 0000:01:00.0: reg 18: [io 0xcc00-0xcc7f] pci 0000:01:00.0: PME# supported from D3hot D3cold pci 0000:00:1c.5: PCI bridge to [bus 01] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:04:01.0: [10ec:8029] type 00 class 0x020000 pci 0000:04:01.0: reg 10: [io 0xec00-0xec1f] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc7e00000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P4._PRT] ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type scsi registered libata version 3.00 loaded. ACPI: bus type usb registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] e820: reserve RAM buffer [mem 0xc7d80000-0xc7ffffff] HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet FS-Cache: Loaded pnp: PnP ACPI init ACPI: bus type pnp registered system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) system 00:05: [io 0x0290-0x0297] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:06: [io 0x04d0-0x04d1] has been reserved system 00:06: [io 0x0800-0x087f] has been reserved system 00:06: [io 0x0500-0x057f] has been reserved system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) system 00:09: [mem 0xffc00000-0xffefffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0xc7dfffff] could not be reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:1c.0: BAR 8: assigned [mem 0xc7e00000-0xc81fffff] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc8200000-0xc83fffff 64bit pref] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc8400000-0xc85fffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:1c.0: PCI bridge to [bus 03] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xc7e00000-0xc81fffff] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 02] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1c.4: bridge window [mem 0xc8200000-0xc83fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 01] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.5: bridge window [mem 0xc8400000-0xc85fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xc7e00000-0xffffffff] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xc7e00000-0xc81fffff] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:02: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc8400000-0xc85fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:04: resource 8 [mem 0xc7e00000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device PCI: CLS 32 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xc3d7e000-0xc7d7e000] (64MB) mapped at [ffff8800c3d7e000-ffff8800c7d7dfff] HugeTLB registered 2 MB page size, pre-allocated 0 pages DLM installed Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.20) msgmni has been set to 7657 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X intel_idle: does not run on family 6 model 15 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: Requesting acpi_cpufreq Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 131072K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem i915 0000:00:02.0: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 128x48 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier i915: No ACPI video bus found [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 loop: module loaded ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 44 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8100 irq 44 ata2: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8180 irq 44 ata3: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8200 irq 44 ata4: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8280 irq 44 ata5: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8300 irq 44 ata6: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8380 irq 44 scsi6 : pata_jmicron scsi7 : pata_jmicron ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver cdc_subset ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1a.7: setting latency timer to 64 ehci-pci 0000:00:1a.7: EHCI Host Controller ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.7: debug port 1 ehci-pci 0000:00:1a.7: cache line size of 32 is not supported ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe8fb000 ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci-pci 0000:00:1d.7: setting latency timer to 64 ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 32 is not supported ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe8fa000 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b480 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000b880 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver aiptek rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20121018/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.0: Using relative temperature scale! md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 TCP: cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 sctp: Hash tables configured (established 65536 bind 65536) rtc_cmos 00:02: setting system clock to 2013-03-15 14:59:37 UTC (1363359577) ALSA device list: #0: HDA Intel at 0xfe8f4000 irq 45 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7.01: ATAPI: ASUS DRW-22B3L, 1.00, max UDMA/66 ata7.01: configured for UDMA/66 ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 2-5: new high-speed USB device number 3 using ehci-pci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk usb 6-1: new low-speed USB device number 2 using uhci_hcd tsc: Refined TSC clocksource calibration: 2333.332 MHz Switching to clocksource tsc ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sd 2:0:0:0: [sdc] Attached SCSI disk input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input11 hid-generic 0003:04F3:0210.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sdd2 sdd3 sd 3:0:0:0: [sdd] Attached SCSI disk ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sde3 sd 4:0:0:0: [sde] Attached SCSI disk ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 6:0:1:0: CD-ROM ASUS DRW-22B3L 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 6:0:1:0: Attached scsi CD-ROM sr0 sdf: sdf1 sdf2 sdf3 sd 5:0:0:0: [sdf] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering sdd2 ... md: adding sdd2 ... md: sdc2 has different UUID to sdd2 md: adding sdb2 ... md: sda2 has different UUID to sdd2 md: created md1 md: bind<sdb2> md: bind<sdd2> md: running: <sdd2><sdb2> md/raid1:md1: active with 2 out of 2 mirrors md1: detected capacity change from 0 to 4301717504 md: considering sdc2 ... md: adding sdc2 ... md: adding sda2 ... md: created md11 md: bind<sda2> md: bind<sdc2> md: running: <sdc2><sda2> md/raid1:md11: active with 2 out of 2 mirrors md11: detected capacity change from 0 to 4301717504 md: ... autorun DONE. md1: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs (md1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 9:1. devtmpfs: mounted Freeing unused kernel memory: 544k freed udevd[1016]: starting version 175 md11: unknown partition table ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker eth1: RealTek RTL-8029 found at 0xec00, IRQ 17, 00:50:fc:a9:2f:53. dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick) usb 2-5: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... DiB0070: successfully identified IR keymap rc-dib0700-rc5 not found Registered IR keymap rc-empty input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/rc/rc0/input12 rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/rc/rc0 dvb-usb: could not initialize remote control. dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 Adding 4200960k swap on /dev/sdf2. Priority:1 extents:1 across:4200960k Adding 4200960k swap on /dev/sde2. Priority:1 extents:1 across:4200960k EXT3-fs (md1): using internal journal md: md0 stopped. md: bind<sdb1> md: bind<sdf1> md: bind<sde1> md: bind<sdc1> md: bind<sdd1> md: bind<sda1> md/raid:md0: device sda1 operational as raid disk 0 md/raid:md0: device sdd1 operational as raid disk 5 md/raid:md0: device sdc1 operational as raid disk 4 md/raid:md0: device sde1 operational as raid disk 3 md/raid:md0: device sdf1 operational as raid disk 2 md/raid:md0: device sdb1 operational as raid disk 1 md/raid:md0: allocated 6402kB md/raid:md0: raid level 5 active with 6 out of 6 devices, algorithm 2 RAID conf printout: --- level:5 rd:6 wd:6 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdb1 disk 2, o:1, dev:sdf1 disk 3, o:1, dev:sde1 disk 4, o:1, dev:sdc1 disk 5, o:1, dev:sdd1 md0: detected capacity change from 0 to 2199973724160 md0: unknown partition table md: md2 stopped. md: bind<sde3> md: bind<sdf3> md/raid1:md2: active with 2 out of 2 mirrors md2: detected capacity change from 0 to 55808450560 md2: unknown partition table md: md_d1 stopped. md: bind<sdb3> md: bind<sda3> md/raid1:md_d1: active with 2 out of 2 mirrors md_d1: detected capacity change from 0 to 55808450560 md_d1: p1 p2 p3 md: md_d11 stopped. md: bind<sdd3> md: bind<sdc3> md/raid1:md_d11: active with 2 out of 2 mirrors md_d11: detected capacity change from 0 to 55808450560 md_d11: p1 p2 p3 kjournald starting. Commit interval 5 seconds EXT3-fs (md11): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md_d1p1): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md_d1p2): using internal journal EXT3-fs (md_d1p2): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md_d1p3): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md_d11p1): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md_d11p2): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md_d11p3): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md2): using internal journal EXT3-fs (md2): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md0): using internal journal EXT3-fs (md0): mounted filesystem with writeback data mode ATL1E 0000:01:00.0: irq 46 for MSI/MSI-X ATL1E 0000:01:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>

Xorg.0.log after booting 3.8.2

[ 15.864] X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 15.864] X Protocol Version 11, Revision 0 [ 15.864] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian [ 15.864] Current Operating System: Linux blaulicht 3.8.2-amd64 #18 SMP PREEMPT Mon Mar 4 14:07:04 CET 2013 x86_64 [ 15.864] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.2-amd64 root=/dev/md1 ro [ 15.864] Build Date: 23 February 2013 06:25:22PM [ 15.864] xorg-server 2:1.12.4-5 (Julien Cristau jcristau@debian.org) [ 15.864] Current version of pixman: 0.26.0 [ 15.864] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.864] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.864] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 16 11:25:07 2013 [ 15.924] (==) Using config file: "/etc/X11/xorg.conf" [ 15.924] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 15.932] (==) No Layout section. Using the first Screen section. [ 15.932] (==) No screen section available. Using defaults. [ 15.932] (**) |-->Screen "Default Screen Section" (0) [ 15.932] (**) | |-->Monitor "<default monitor>" [ 15.943] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 15.943] (**) | |-->Device "ONBOARD" [ 15.943] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 15.943] (==) Automatically adding devices [ 15.943] (==) Automatically enabling devices [ 16.116] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 16.116] Entry deleted from font path. [ 16.192] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 16.192] Entry deleted from font path. [ 16.192] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 16.192] (==) ModulePath set to "/usr/lib/xorg/modules" [ 16.192] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 16.192] (II) Loader magic: 0xf77575a0 [ 16.192] (II) Module ABI versions: [ 16.192] X.Org ANSI C Emulation: 0.4 [ 16.192] X.Org Video Driver: 12.1 [ 16.192] X.Org XInput driver : 16.0 [ 16.192] X.Org Server Extension : 6.0 [ 16.192] (--) PCI:*(0:0:2:0) 8086:2e22:1043:8336 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000bc00/8 [ 16.192] (--) PCI: (0:0:2:1) 8086:2e23:1043:8336 rev 3, Mem @ 0xfe900000/1048576 [ 16.193] (II) Open ACPI successful (/var/run/acpid.socket) [ 16.193] (II) LoadModule: "extmod" [ 16.208] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 16.214] (II) Module extmod: vendor="X.Org Foundation" [ 16.214] compiled for 1.12.4, module version = 1.0.0 [ 16.214] Module class: X.Org Server Extension [ 16.214] ABI class: X.Org Server Extension, version 6.0 [ 16.214] (II) Loading extension SELinux [ 16.214] (II) Loading extension MIT-SCREEN-SAVER [ 16.214] (II) Loading extension XFree86-VidModeExtension [ 16.214] (II) Loading extension XFree86-DGA [ 16.214] (II) Loading extension DPMS [ 16.214] (II) Loading extension XVideo [ 16.214] (II) Loading extension XVideo-MotionCompensation [ 16.214] (II) Loading extension X-Resource [ 16.214] (II) LoadModule: "dbe" [ 16.214] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 16.215] (II) Module dbe: vendor="X.Org Foundation" [ 16.215] compiled for 1.12.4, module version = 1.0.0 [ 16.215] Module class: X.Org Server Extension [ 16.215] ABI class: X.Org Server Extension, version 6.0 [ 16.215] (II) Loading extension DOUBLE-BUFFER [ 16.215] (II) LoadModule: "glx" [ 16.215] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 16.235] (II) Module glx: vendor="X.Org Foundation" [ 16.235] compiled for 1.12.4, module version = 1.0.0 [ 16.235] ABI class: X.Org Server Extension, version 6.0 [ 16.235] (==) AIGLX enabled [ 16.235] (II) Loading extension GLX [ 16.235] (II) LoadModule: "record" [ 16.235] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 16.235] (II) Module record: vendor="X.Org Foundation" [ 16.235] compiled for 1.12.4, module version = 1.13.0 [ 16.235] Module class: X.Org Server Extension [ 16.235] ABI class: X.Org Server Extension, version 6.0 [ 16.235] (II) Loading extension RECORD [ 16.235] (II) LoadModule: "dri" [ 16.235] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 16.253] (II) Module dri: vendor="X.Org Foundation" [ 16.253] compiled for 1.12.4, module version = 1.0.0 [ 16.253] ABI class: X.Org Server Extension, version 6.0 [ 16.253] (II) Loading extension XFree86-DRI [ 16.253] (II) LoadModule: "dri2" [ 16.253] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 16.253] (II) Module dri2: vendor="X.Org Foundation" [ 16.253] compiled for 1.12.4, module version = 1.2.0 [ 16.253] ABI class: X.Org Server Extension, version 6.0 [ 16.253] (II) Loading extension DRI2 [ 16.253] (II) LoadModule: "intel" [ 16.253] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 16.308] (II) Module intel: vendor="X.Org Foundation" [ 16.308] compiled for 1.12.3.902, module version = 2.19.0 [ 16.308] Module class: X.Org Video Driver [ 16.308] ABI class: X.Org Video Driver, version 12.1 [ 16.308] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 16.309] (++) using VT number 7

[ 16.309] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 16.309] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 16.316] drmOpenDevice: node name is /dev/dri/card0 [ 16.316] drmOpenDevice: open result is 9, (OK) [ 16.316] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 16.316] drmOpenDevice: node name is /dev/dri/card0 [ 16.316] drmOpenDevice: open result is 9, (OK) [ 16.316] drmOpenByBusid: drmOpenMinor returns 9 [ 16.316] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 16.316] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 16.316] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 16.316] (==) intel(0): RGB weight 888 [ 16.316] (==) intel(0): Default visual is TrueColor [ 16.317] (II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43 [ 16.317] (--) intel(0): Chipset: "G45/G43" [ 16.317] (**) intel(0): Relaxed fencing enabled [ 16.317] (**) intel(0): Wait on SwapBuffers? enabled [ 16.317] (**) intel(0): Triple buffering? enabled [ 16.317] (**) intel(0): Framebuffer tiled [ 16.317] (**) intel(0): Pixmaps tiled [ 16.317] (**) intel(0): 3D buffers tiled [ 16.325] (**) intel(0): SwapBuffers wait enabled [ 16.325] (==) intel(0): video overlay key set to 0x101fe [ 16.353] (II) intel(0): Output VGA1 has no monitor section [ 16.429] (II) intel(0): Output HDMI1 using monitor section LEFT [ 16.515] (**) intel(0): Option "LeftOf" "HDMI2" [ 16.515] (**) intel(0): Option "Primary" "True" [ 16.546] (II) intel(0): Output DP1 has no monitor section [ 16.623] (II) intel(0): Output HDMI2 using monitor section RIGHT [ 16.623] (**) intel(0): Option "RightOf" "HDMI1" [ 16.623] (**) intel(0): Option "Primary" "False" [ 16.653] (II) intel(0): Output DP2 has no monitor section [ 16.730] (II) intel(0): EDID for output HDMI1 [ 16.730] (II) intel(0): Manufacturer: SAM Model: 2b6 Serial#: 1213542964 [ 16.730] (II) intel(0): Year: 2007 Week: 41 [ 16.730] (II) intel(0): EDID Version: 1.3 [ 16.730] (II) intel(0): Digital Display Input [ 16.730] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32 [ 16.730] (II) intel(0): Gamma: 2.60 [ 16.730] (II) intel(0): DPMS capabilities: Off [ 16.730] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 16.730] (II) intel(0): First detailed timing is preferred mode [ 16.730] (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 [ 16.730] (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.312 whiteY: 0.329 [ 16.730] (II) intel(0): Supported established timings: [ 16.730] (II) intel(0): 720x400@70Hz [ 16.730] (II) intel(0): 640x480@60Hz [ 16.730] (II) intel(0): 640x480@67Hz [ 16.730] (II) intel(0): 640x480@72Hz [ 16.730] (II) intel(0): 640x480@75Hz [ 16.730] (II) intel(0): 800x600@56Hz [ 16.730] (II) intel(0): 800x600@60Hz [ 16.730] (II) intel(0): 800x600@72Hz [ 16.730] (II) intel(0): 800x600@75Hz [ 16.730] (II) intel(0): 832x624@75Hz [ 16.730] (II) intel(0): 1024x768@60Hz [ 16.730] (II) intel(0): 1024x768@70Hz [ 16.730] (II) intel(0): 1024x768@75Hz [ 16.730] (II) intel(0): 1280x1024@75Hz [ 16.730] (II) intel(0): 1152x864@75Hz [ 16.730] (II) intel(0): Manufacturer's mask: 0 [ 16.730] (II) intel(0): Supported standard timings: [ 16.730] (II) intel(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 16.730] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 16.730] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 16.730] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 16.730] (II) intel(0): Supported detailed timing: [ 16.730] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm [ 16.730] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 16.730] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 16.730] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz [ 16.730] (II) intel(0): Monitor name: SyncMaster [ 16.730] (II) intel(0): Serial No: HS1PA06344 [ 16.730] (II) intel(0): EDID (in hex): [ 16.730] (II) intel(0): 00ffffffffffff004c2db60234325548 [ 16.730] (II) intel(0): 29110103803420a02a5ad1a7564b9b24 [ 16.730] (II) intel(0): 135054bfef80a94081808140714f0101 [ 16.730] (II) intel(0): 010101010101283c80a070b023403020 [ 16.730] (II) intel(0): 360006442100001a000000fd00384b1e [ 16.730] (II) intel(0): 5111000a202020202020000000fc0053 [ 16.730] (II) intel(0): 796e634d61737465720a2020000000ff [ 16.730] (II) intel(0): 00485331504130363334340a2020009a [ 16.730] (II) intel(0): EDID vendor "SAM", prod id 694 [ 16.816] (II) intel(0): Using EDID range info for horizontal sync [ 16.816] (II) intel(0): Using EDID range info for vertical refresh [ 16.816] (II) intel(0): Printing DDC gathered Modelines: [ 16.816] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 16.816] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 16.816] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 16.816] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 16.816] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 16.816] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 16.816] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 16.816] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 16.816] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 16.816] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 16.816] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 16.816] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 16.816] (II) intel(0): Printing probed modes for output HDMI1 [ 16.816] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 16.816] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 16.816] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 16.816] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 16.816] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 16.816] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 16.816] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 16.816] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 16.816] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 16.816] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 16.816] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 16.816] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 16.816] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 16.844] (II) intel(0): EDID for output VGA1 [ 16.874] (II) intel(0): EDID for output DP1 [ 16.950] (II) intel(0): EDID for output HDMI2 [ 16.950] (II) intel(0): Manufacturer: SAM Model: 43f Serial#: 1297691188 [ 16.950] (II) intel(0): Year: 2008 Week: 48 [ 16.950] (II) intel(0): EDID Version: 1.3 [ 16.950] (II) intel(0): Digital Display Input [ 16.950] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32 [ 16.950] (II) intel(0): Gamma: 2.20 [ 16.950] (II) intel(0): DPMS capabilities: Off [ 16.950] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 16.950] (II) intel(0): First detailed timing is preferred mode [ 16.950] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 16.950] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 16.950] (II) intel(0): Supported established timings: [ 16.950] (II) intel(0): 640x480@60Hz [ 16.950] (II) intel(0): 800x600@56Hz [ 16.950] (II) intel(0): 800x600@60Hz [ 16.950] (II) intel(0): 1024x768@60Hz [ 16.950] (II) intel(0): Manufacturer's mask: 0 [ 16.950] (II) intel(0): Supported standard timings: [ 16.950] (II) intel(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 16.950] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 16.950] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 16.950] (II) intel(0): Supported detailed timing: [ 16.950] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm [ 16.950] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 16.950] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 16.950] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz [ 16.950] (II) intel(0): Monitor name: SyncMaster [ 16.950] (II) intel(0): Serial No: H9XQB07102 [ 16.950] (II) intel(0): EDID (in hex): [ 16.950] (II) intel(0): 00ffffffffffff004c2d3f043432594d [ 16.950] (II) intel(0): 30120103803420782aee91a3544c9926 [ 16.950] (II) intel(0): 0f5054230800a9408180814001010101 [ 16.950] (II) intel(0): 010101010101283c80a070b023403020 [ 16.950] (II) intel(0): 360006442100001a000000fd00383c1e [ 16.950] (II) intel(0): 5111000a202020202020000000fc0053 [ 16.950] (II) intel(0): 796e634d61737465720a2020000000ff [ 16.950] (II) intel(0): 00483958514230373130320a202000a3 [ 16.950] (II) intel(0): Printing probed modes for output HDMI2 [ 16.950] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 16.950] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 16.950] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 16.950] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 16.950] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 16.950] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 16.950] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 16.950] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 16.980] (II) intel(0): EDID for output DP2 [ 16.980] (II) intel(0): Output HDMI1 connected [ 16.980] (II) intel(0): Output VGA1 disconnected [ 16.980] (II) intel(0): Output DP1 disconnected [ 16.980] (II) intel(0): Output HDMI2 connected [ 16.980] (II) intel(0): Output DP2 disconnected [ 16.980] (II) intel(0): Using user preference for initial modes [ 16.980] (II) intel(0): Output HDMI1 using initial mode 1920x1200 [ 16.980] (II) intel(0): Output HDMI2 using initial mode 1920x1200 [ 16.980] (EE) intel(0): Output position loop. Moving HDMI1 to 0,0 [ 16.980] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 16.980] (II) intel(0): Kernel page flipping support detected, enabling [ 16.980] (**) intel(0): Display dimensions: (520, 320) mm [ 16.980] (**) intel(0): DPI set to (187, 95) [ 16.980] (II) Loading sub module "fb" [ 16.980] (II) LoadModule: "fb" [ 17.077] (II) Loading /usr/lib/xorg/modules/libfb.so [ 17.089] (II) Module fb: vendor="X.Org Foundation" [ 17.089] compiled for 1.12.4, module version = 1.0.0 [ 17.089] ABI class: X.Org ANSI C Emulation, version 0.4 [ 17.089] (II) Loading sub module "dri2" [ 17.089] (II) LoadModule: "dri2" [ 17.089] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 17.089] (II) Module dri2: vendor="X.Org Foundation" [ 17.089] compiled for 1.12.4, module version = 1.2.0 [ 17.089] ABI class: X.Org Server Extension, version 6.0 [ 17.089] (==) Depth 24 pixmap format is 32 bpp [ 17.089] (II) intel(0): [DRI2] Setup complete [ 17.089] (II) intel(0): [DRI2] DRI driver: i965 [ 17.089] (II) intel(0): Allocated new frame buffer 3840x1200 stride 15360, tiled [ 17.260] (II) UXA(0): Driver registered support for the following operations: [ 17.260] (II) solid [ 17.260] (II) copy [ 17.260] (II) composite (RENDER acceleration) [ 17.260] (II) put_image [ 17.260] (II) get_image [ 17.260] (==) intel(0): Backing store disabled [ 17.260] (==) intel(0): Silken mouse enabled [ 17.260] (II) intel(0): Initializing HW Cursor [ 17.260] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 17.260] (==) intel(0): DPMS enabled [ 17.260] (==) intel(0): Intel XvMC decoder enabled [ 17.260] (II) intel(0): Set up textured video [ 17.261] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 17.261] (II) intel(0): direct rendering: DRI2 Enabled [ 17.261] (==) intel(0): hotplug detection: "enabled" [ 17.301] (--) RandR disabled [ 17.301] (II) Initializing built-in extension Generic Event Extension [ 17.301] (II) Initializing built-in extension SHAPE [ 17.301] (II) Initializing built-in extension MIT-SHM [ 17.301] (II) Initializing built-in extension XInputExtension [ 17.301] (II) Initializing built-in extension XTEST [ 17.301] (II) Initializing built-in extension BIG-REQUESTS [ 17.301] (II) Initializing built-in extension SYNC [ 17.301] (II) Initializing built-in extension XKEYBOARD [ 17.301] (II) Initializing built-in extension XC-MISC [ 17.301] (II) Initializing built-in extension SECURITY [ 17.301] (II) Initializing built-in extension XINERAMA [ 17.301] (II) Initializing built-in extension XFIXES [ 17.301] (II) Initializing built-in extension RENDER [ 17.301] (II) Initializing built-in extension RANDR [ 17.301] (II) Initializing built-in extension COMPOSITE [ 17.301] (II) Initializing built-in extension DAMAGE [ 17.301] (II) SELinux: Disabled on system [ 17.739] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 17.739] (II) AIGLX: enabled GLX_INTEL_swap_event [ 17.739] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 17.739] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 17.739] (II) AIGLX: Loaded and initialized i965 [ 17.739] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 17.739] (II) intel(0): Setting screen physical size to 1015 x 317 [ 18.292] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 18.292] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 18.292] (II) LoadModule: "evdev" [ 18.293] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 18.312] (II) Module evdev: vendor="X.Org Foundation" [ 18.312] compiled for 1.12.1, module version = 2.7.0 [ 18.312] Module class: X.Org XInput Driver [ 18.312] ABI class: X.Org XInput driver, version 16.0 [ 18.312] (II) Using input driver 'evdev' for 'Power Button' [ 18.312] (**) Power Button: always reports core events [ 18.312] (**) evdev: Power Button: Device: "/dev/input/event1" [ 18.312] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 18.312] (--) evdev: Power Button: Found keys [ 18.312] (II) evdev: Power Button: Configuring as keyboard [ 18.312] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 18.312] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 18.312] (**) Option "xkb_rules" "evdev" [ 18.312] (**) Option "xkb_model" "cherrycmexpert" [ 18.312] (**) Option "xkb_layout" "us" [ 18.312] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu,terminate:ctrl_alt_bksp" [ 18.350] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 18.350] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 18.350] (II) Using input driver 'evdev' for 'Power Button' [ 18.350] (**) Power Button: always reports core events [ 18.350] (**) evdev: Power Button: Device: "/dev/input/event0" [ 18.350] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 18.350] (--) evdev: Power Button: Found keys [ 18.350] (II) evdev: Power Button: Configuring as keyboard [ 18.350] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 18.350] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 18.350] (**) Option "xkb_rules" "evdev" [ 18.350] (**) Option "xkb_model" "cherrycmexpert" [ 18.350] (**) Option "xkb_layout" "us" [ 18.350] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu,terminate:ctrl_alt_bksp" [ 18.350] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10) [ 18.350] (II) No input driver specified, ignoring this device. [ 18.350] (II) This device may have been added with another device file. [ 18.350] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event2) [ 18.350] (II) No input driver specified, ignoring this device. [ 18.350] (II) This device may have been added with another device file. [ 18.351] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event3) [ 18.351] (II) No input driver specified, ignoring this device. [ 18.351] (II) This device may have been added with another device file. [ 18.351] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event4) [ 18.351] (II) No input driver specified, ignoring this device. [ 18.351] (II) This device may have been added with another device file. [ 18.351] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event5) [ 18.351] (II) No input driver specified, ignoring this device. [ 18.351] (II) This device may have been added with another device file. [ 18.351] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6) [ 18.351] (II) No input driver specified, ignoring this device. [ 18.351] (II) This device may have been added with another device file. [ 18.352] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event7) [ 18.352] (II) No input driver specified, ignoring this device. [ 18.352] (II) This device may have been added with another device file. [ 18.352] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event8) [ 18.352] (II) No input driver specified, ignoring this device. [ 18.352] (II) This device may have been added with another device file. [ 18.352] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9) [ 18.352] (II) No input driver specified, ignoring this device. [ 18.352] (II) This device may have been added with another device file. [ 18.352] (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/event11) [ 18.352] (**) PS/2+USB Mouse: Applying InputClass "evdev pointer catchall" [ 18.352] (II) Using input driver 'evdev' for 'PS/2+USB Mouse' [ 18.352] (**) PS/2+USB Mouse: always reports core events [ 18.352] (**) evdev: PS/2+USB Mouse: Device: "/dev/input/event11" [ 18.352] (--) evdev: PS/2+USB Mouse: Vendor 0x4f3 Product 0x210 [ 18.352] (--) evdev: PS/2+USB Mouse: Found 3 mouse buttons [ 18.352] (--) evdev: PS/2+USB Mouse: Found scroll wheel(s) [ 18.352] (--) evdev: PS/2+USB Mouse: Found relative axes [ 18.352] (--) evdev: PS/2+USB Mouse: Found x and y relative axes [ 18.352] (II) evdev: PS/2+USB Mouse: Configuring as mouse [ 18.352] (II) evdev: PS/2+USB Mouse: Adding scrollwheel support [ 18.352] (**) evdev: PS/2+USB Mouse: YAxisMapping: buttons 4 and 5 [ 18.352] (**) evdev: PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 18.353] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input11/event11" [ 18.353] (II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE, id 8) [ 18.353] (II) evdev: PS/2+USB Mouse: initialized for relative axes. [ 18.353] (**) PS/2+USB Mouse: (accel) keeping acceleration scheme 1 [ 18.353] (**) PS/2+USB Mouse: (accel) acceleration profile 0 [ 18.353] (**) PS/2+USB Mouse: (accel) acceleration factor: 2.000 [ 18.353] (**) PS/2+USB Mouse: (accel) acceleration threshold: 4 [ 18.353] (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/mouse0) [ 18.353] (II) No input driver specified, ignoring this device. [ 18.353] (II) This device may have been added with another device file. [ 18.353] (II) config/udev: Adding input device HID 046a:0021 (/dev/input/event12) [ 18.353] (**) HID 046a:0021: Applying InputClass "evdev keyboard catchall" [ 18.353] (II) Using input driver 'evdev' for 'HID 046a:0021' [ 18.353] (**) HID 046a:0021: always reports core events [ 18.353] (**) evdev: HID 046a:0021: Device: "/dev/input/event12" [ 18.353] (--) evdev: HID 046a:0021: Vendor 0x46a Product 0x21 [ 18.353] (--) evdev: HID 046a:0021: Found keys [ 18.353] (II) evdev: HID 046a:0021: Configuring as keyboard [ 18.353] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input12/event12" [ 18.353] (II) XINPUT: Adding extended input device "HID 046a:0021" (type: KEYBOARD, id 9) [ 18.353] (**) Option "xkb_rules" "evdev" [ 18.353] (**) Option "xkb_model" "cherrycmexpert" [ 18.353] (**) Option "xkb_layout" "us" [ 18.353] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu,terminate:ctrl_alt_bksp" [ 18.354] (II) config/udev: Adding input device HID 046a:0021 (/dev/input/event13) [ 18.354] (**) HID 046a:0021: Applying InputClass "evdev keyboard catchall" [ 18.354] (II) Using input driver 'evdev' for 'HID 046a:0021' [ 18.354] (**) HID 046a:0021: always reports core events [ 18.354] (**) evdev: HID 046a:0021: Device: "/dev/input/event13" [ 18.354] (--) evdev: HID 046a:0021: Vendor 0x46a Product 0x21 [ 18.354] (--) evdev: HID 046a:0021: Found 1 mouse buttons [ 18.354] (--) evdev: HID 046a:0021: Found scroll wheel(s) [ 18.354] (--) evdev: HID 046a:0021: Found relative axes [ 18.354] (II) evdev: HID 046a:0021: Forcing relative x/y axes to exist. [ 18.354] (--) evdev: HID 046a:0021: Found absolute axes [ 18.354] (II) evdev: HID 046a:0021: Forcing absolute x/y axes to exist. [ 18.354] (--) evdev: HID 046a:0021: Found keys [ 18.354] (II) evdev: HID 046a:0021: Configuring as mouse [ 18.354] (II) evdev: HID 046a:0021: Configuring as keyboard [ 18.354] (II) evdev: HID 046a:0021: Adding scrollwheel support [ 18.354] (**) evdev: HID 046a:0021: YAxisMapping: buttons 4 and 5 [ 18.354] (**) evdev: HID 046a:0021: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 18.354] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input13/event13" [ 18.354] (II) XINPUT: Adding extended input device "HID 046a:0021" (type: KEYBOARD, id 10) [ 18.354] (**) Option "xkb_rules" "evdev" [ 18.354] (**) Option "xkb_model" "cherrycmexpert" [ 18.354] (**) Option "xkb_layout" "us" [ 18.354] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu,terminate:ctrl_alt_bksp" [ 18.354] (II) evdev: HID 046a:0021: initialized for relative axes. [ 18.354] (WW) evdev: HID 046a:0021: ignoring absolute axes. [ 18.355] (**) HID 046a:0021: (accel) keeping acceleration scheme 1 [ 18.355] (**) HID 046a:0021: (accel) acceleration profile 0 [ 18.355] (**) HID 046a:0021: (accel) acceleration factor: 2.000 [ 18.355] (**) HID 046a:0021: (accel) acceleration threshold: 4 [ 105.529] (II) intel(0): EDID vendor "SAM", prod id 1087 [ 105.529] (II) intel(0): Using hsync ranges from config file [ 105.529] (II) intel(0): Using vrefresh ranges from config file [ 105.529] (II) intel(0): Printing DDC gathered Modelines: [ 105.529] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 105.529] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 105.529] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 105.529] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 105.529] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 105.529] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 105.529] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 105.529] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 5062.980] (II) intel(0): EDID vendor "SAM", prod id 1087 [ 5062.980] (II) intel(0): Using hsync ranges from config file [ 5062.980] (II) intel(0): Using vrefresh ranges from config file [ 5062.980] (II) intel(0): Printing DDC gathered Modelines: [ 5062.980] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 5062.980] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5062.980] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 5062.980] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5062.980] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5062.980] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 5062.980] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 5062.980] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)