Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros.
Signed-off-by: Harsha Sharma harshasharmaiitr@gmail.com --- drivers/gpu/drm/tinydrm/mi0283qt.c | 8 ++++---- drivers/gpu/drm/tinydrm/repaper.c | 26 +++++++++++++------------- drivers/gpu/drm/tinydrm/st7586.c | 6 +++--- 3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c index 7e5bb7d..7dded50 100644 --- a/drivers/gpu/drm/tinydrm/mi0283qt.c +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c @@ -31,7 +31,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi)
ret = regulator_enable(mipi->regulator); if (ret) { - dev_err(dev, "Failed to enable regulator %d\n", ret); + DRM_DEV_ERROR(dev, "Failed to enable regulator %d\n", ret); return ret; }
@@ -42,7 +42,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi) mipi_dbi_hw_reset(mipi); ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET); if (ret) { - dev_err(dev, "Error sending command %d\n", ret); + DRM_DEV_ERROR(dev, "Error sending command %d\n", ret); regulator_disable(mipi->regulator); return ret; } @@ -175,13 +175,13 @@ static int mi0283qt_probe(struct spi_device *spi)
mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(mipi->reset)) { - dev_err(dev, "Failed to get gpio 'reset'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); return PTR_ERR(mipi->reset); }
dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); if (IS_ERR(dc)) { - dev_err(dev, "Failed to get gpio 'dc'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n"); return PTR_ERR(dc); }
diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c index 30dc97b..bd152bb 100644 --- a/drivers/gpu/drm/tinydrm/repaper.c +++ b/drivers/gpu/drm/tinydrm/repaper.c @@ -473,7 +473,7 @@ static void repaper_get_temperature(struct repaper_epd *epd)
ret = thermal_zone_get_temp(epd->thermal, &temperature); if (ret) { - dev_err(&epd->spi->dev, "Failed to get temperature (%d)\n", + DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret); return; } @@ -629,7 +629,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb, mutex_unlock(&tdev->dirty_lock);
if (ret) - dev_err(fb->dev->dev, "Failed to update display (%d)\n", ret); + DRM_DEV_ERROR(fb->dev->dev, "Failed to update display (%d)\n", ret); kfree(buf);
return ret; @@ -703,7 +703,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, }
if (!i) { - dev_err(dev, "timeout waiting for panel to become ready.\n"); + DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n"); power_off(epd); return; } @@ -725,9 +725,9 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, ret = repaper_read_val(spi, 0x0f); if (ret < 0 || !(ret & 0x80)) { if (ret < 0) - dev_err(dev, "failed to read chip (%d)\n", ret); + DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); else - dev_err(dev, "panel is reported broken\n"); + DRM_DEV_ERROR(dev, "panel is reported broken\n"); power_off(epd); return; } @@ -767,7 +767,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, /* check DC/DC */ ret = repaper_read_val(spi, 0x0f); if (ret < 0) { - dev_err(dev, "failed to read chip (%d)\n", ret); + DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); power_off(epd); return; } @@ -779,7 +779,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, }
if (!dc_ok) { - dev_err(dev, "dc/dc failed\n"); + DRM_DEV_ERROR(dev, "dc/dc failed\n"); power_off(epd); return; } @@ -959,7 +959,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->panel_on)) { ret = PTR_ERR(epd->panel_on); if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get gpio 'panel-on'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n"); return ret; }
@@ -967,7 +967,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->discharge)) { ret = PTR_ERR(epd->discharge); if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get gpio 'discharge'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n"); return ret; }
@@ -975,7 +975,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->reset)) { ret = PTR_ERR(epd->reset); if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get gpio 'reset'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); return ret; }
@@ -983,7 +983,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->busy)) { ret = PTR_ERR(epd->busy); if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get gpio 'busy'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n"); return ret; }
@@ -991,7 +991,7 @@ static int repaper_probe(struct spi_device *spi) &thermal_zone)) { epd->thermal = thermal_zone_get_zone_by_name(thermal_zone); if (IS_ERR(epd->thermal)) { - dev_err(dev, "Failed to get thermal zone: %s\n", + DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone); return PTR_ERR(epd->thermal); } @@ -1033,7 +1033,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->border)) { ret = PTR_ERR(epd->border); if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get gpio 'border'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n"); return ret; }
diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c index b439956..14361a5 100644 --- a/drivers/gpu/drm/tinydrm/st7586.c +++ b/drivers/gpu/drm/tinydrm/st7586.c @@ -187,7 +187,7 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe, mipi_dbi_hw_reset(mipi); ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f); if (ret) { - dev_err(dev, "Error sending command %d\n", ret); + DRM_DEV_ERROR(dev, "Error sending command %d\n", ret); return; }
@@ -355,13 +355,13 @@ static int st7586_probe(struct spi_device *spi)
mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(mipi->reset)) { - dev_err(dev, "Failed to get gpio 'reset'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); return PTR_ERR(mipi->reset); }
a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW); if (IS_ERR(a0)) { - dev_err(dev, "Failed to get gpio 'a0'\n"); + DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n"); return PTR_ERR(a0); }
Den 23.09.2017 11.10, skrev Harsha Sharma:
Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros.
Signed-off-by: Harsha Sharma harshasharmaiitr@gmail.com
drivers/gpu/drm/tinydrm/mi0283qt.c | 8 ++++---- drivers/gpu/drm/tinydrm/repaper.c | 26 +++++++++++++------------- drivers/gpu/drm/tinydrm/st7586.c | 6 +++--- 3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c index 7e5bb7d..7dded50 100644 --- a/drivers/gpu/drm/tinydrm/mi0283qt.c +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c @@ -31,7 +31,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi)
ret = regulator_enable(mipi->regulator); if (ret) {
dev_err(dev, "Failed to enable regulator %d\n", ret);
DRM_DEV_ERROR(dev, "Failed to enable regulator %d\n", ret);@@ -42,7 +42,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi) mipi_dbi_hw_reset(mipi); ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET); if (ret) {
dev_err(dev, "Error sending command %d\n", ret);
DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);@@ -175,13 +175,13 @@ static int mi0283qt_probe(struct spi_device *spi)
mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(mipi->reset)) {
dev_err(dev, "Failed to get gpio 'reset'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");return PTR_ERR(mipi->reset); }
dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); if (IS_ERR(dc)) {
dev_err(dev, "Failed to get gpio 'dc'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c index 30dc97b..bd152bb 100644 --- a/drivers/gpu/drm/tinydrm/repaper.c +++ b/drivers/gpu/drm/tinydrm/repaper.c @@ -473,7 +473,7 @@ static void repaper_get_temperature(struct repaper_epd *epd)
ret = thermal_zone_get_temp(epd->thermal, &temperature); if (ret) {
dev_err(&epd->spi->dev, "Failed to get temperature (%d)\n",
DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret);
Please fix these alignment issues, or maybe just put it all on one line:
CHECK: Alignment should match open parenthesis #59: FILE: drivers/gpu/drm/tinydrm/repaper.c:477: + DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret);
CHECK: Alignment should match open parenthesis #152: FILE: drivers/gpu/drm/tinydrm/repaper.c:995: + DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone);
With that changed you can add to your next version: Reviewed-by: Noralf Trønnes noralf@tronnes.org
return;} @@ -629,7 +629,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb, mutex_unlock(&tdev->dirty_lock);
if (ret)
dev_err(fb->dev->dev, "Failed to update display (%d)\n", ret);
DRM_DEV_ERROR(fb->dev->dev, "Failed to update display (%d)\n", ret);kfree(buf);
return ret;
@@ -703,7 +703,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, }
if (!i) {
dev_err(dev, "timeout waiting for panel to become ready.\n");
DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n");@@ -725,9 +725,9 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, ret = repaper_read_val(spi, 0x0f); if (ret < 0 || !(ret & 0x80)) { if (ret < 0)
dev_err(dev, "failed to read chip (%d)\n", ret);
DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
dev_err(dev, "panel is reported broken\n");
DRM_DEV_ERROR(dev, "panel is reported broken\n");@@ -767,7 +767,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, /* check DC/DC */ ret = repaper_read_val(spi, 0x0f); if (ret < 0) {
dev_err(dev, "failed to read chip (%d)\n", ret);
DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); power_off(epd); return;@@ -779,7 +779,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, }
if (!dc_ok) {
dev_err(dev, "dc/dc failed\n");
DRM_DEV_ERROR(dev, "dc/dc failed\n");@@ -959,7 +959,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->panel_on)) { ret = PTR_ERR(epd->panel_on); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'panel-on'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n");@@ -967,7 +967,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->discharge)) { ret = PTR_ERR(epd->discharge); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'discharge'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n");@@ -975,7 +975,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->reset)) { ret = PTR_ERR(epd->reset); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'reset'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");@@ -983,7 +983,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->busy)) { ret = PTR_ERR(epd->busy); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'busy'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n");@@ -991,7 +991,7 @@ static int repaper_probe(struct spi_device *spi) &thermal_zone)) { epd->thermal = thermal_zone_get_zone_by_name(thermal_zone); if (IS_ERR(epd->thermal)) {
dev_err(dev, "Failed to get thermal zone: %s\n",
DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone); return PTR_ERR(epd->thermal);@@ -1033,7 +1033,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->border)) { ret = PTR_ERR(epd->border); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'border'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n"); return ret;diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c index b439956..14361a5 100644 --- a/drivers/gpu/drm/tinydrm/st7586.c +++ b/drivers/gpu/drm/tinydrm/st7586.c @@ -187,7 +187,7 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe, mipi_dbi_hw_reset(mipi); ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f); if (ret) {
dev_err(dev, "Error sending command %d\n", ret);
DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);@@ -355,13 +355,13 @@ static int st7586_probe(struct spi_device *spi)
mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(mipi->reset)) {
dev_err(dev, "Failed to get gpio 'reset'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");return PTR_ERR(mipi->reset); }
a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW); if (IS_ERR(a0)) {
dev_err(dev, "Failed to get gpio 'a0'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n");
On Mon, Sep 25, 2017 at 06:21:19PM +0200, Noralf Trønnes wrote:
Den 23.09.2017 11.10, skrev Harsha Sharma:
Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros.
Signed-off-by: Harsha Sharma harshasharmaiitr@gmail.com
drivers/gpu/drm/tinydrm/mi0283qt.c | 8 ++++---- drivers/gpu/drm/tinydrm/repaper.c | 26 +++++++++++++------------- drivers/gpu/drm/tinydrm/st7586.c | 6 +++--- 3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c index 7e5bb7d..7dded50 100644 --- a/drivers/gpu/drm/tinydrm/mi0283qt.c +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c @@ -31,7 +31,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi) ret = regulator_enable(mipi->regulator); if (ret) {
dev_err(dev, "Failed to enable regulator %d\n", ret);
DRM_DEV_ERROR(dev, "Failed to enable regulator %d\n", ret);@@ -42,7 +42,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi) mipi_dbi_hw_reset(mipi); ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET); if (ret) {
dev_err(dev, "Error sending command %d\n", ret);
DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);@@ -175,13 +175,13 @@ static int mi0283qt_probe(struct spi_device *spi) mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(mipi->reset)) {
dev_err(dev, "Failed to get gpio 'reset'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
dev_err(dev, "Failed to get gpio 'dc'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c index 30dc97b..bd152bb 100644 --- a/drivers/gpu/drm/tinydrm/repaper.c +++ b/drivers/gpu/drm/tinydrm/repaper.c @@ -473,7 +473,7 @@ static void repaper_get_temperature(struct repaper_epd *epd) ret = thermal_zone_get_temp(epd->thermal, &temperature); if (ret) {
dev_err(&epd->spi->dev, "Failed to get temperature (%d)\n",
DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret);Please fix these alignment issues, or maybe just put it all on one line:
CHECK: Alignment should match open parenthesis #59: FILE: drivers/gpu/drm/tinydrm/repaper.c:477: + DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret);
CHECK: Alignment should match open parenthesis #152: FILE: drivers/gpu/drm/tinydrm/repaper.c:995: + DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone);
With that changed you can add to your next version: Reviewed-by: Noralf Trønnes noralf@tronnes.org
I couldn't find v2 of this one here ... -Daniel
return;} @@ -629,7 +629,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb, mutex_unlock(&tdev->dirty_lock); if (ret)
dev_err(fb->dev->dev, "Failed to update display (%d)\n", ret);
DRM_DEV_ERROR(fb->dev->dev, "Failed to update display (%d)\n", ret);@@ -703,7 +703,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, } if (!i) {
dev_err(dev, "timeout waiting for panel to become ready.\n");
DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n");@@ -725,9 +725,9 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, ret = repaper_read_val(spi, 0x0f); if (ret < 0 || !(ret & 0x80)) { if (ret < 0)
dev_err(dev, "failed to read chip (%d)\n", ret);
DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
dev_err(dev, "panel is reported broken\n");
DRM_DEV_ERROR(dev, "panel is reported broken\n");@@ -767,7 +767,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, /* check DC/DC */ ret = repaper_read_val(spi, 0x0f); if (ret < 0) {
dev_err(dev, "failed to read chip (%d)\n", ret);
DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); power_off(epd); return;@@ -779,7 +779,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, } if (!dc_ok) {
dev_err(dev, "dc/dc failed\n");
DRM_DEV_ERROR(dev, "dc/dc failed\n");@@ -959,7 +959,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->panel_on)) { ret = PTR_ERR(epd->panel_on); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'panel-on'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n");@@ -967,7 +967,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->discharge)) { ret = PTR_ERR(epd->discharge); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'discharge'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n");@@ -975,7 +975,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->reset)) { ret = PTR_ERR(epd->reset); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'reset'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");@@ -983,7 +983,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->busy)) { ret = PTR_ERR(epd->busy); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'busy'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n");@@ -991,7 +991,7 @@ static int repaper_probe(struct spi_device *spi) &thermal_zone)) { epd->thermal = thermal_zone_get_zone_by_name(thermal_zone); if (IS_ERR(epd->thermal)) {
dev_err(dev, "Failed to get thermal zone: %s\n",
DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone); return PTR_ERR(epd->thermal);@@ -1033,7 +1033,7 @@ static int repaper_probe(struct spi_device *spi) if (IS_ERR(epd->border)) { ret = PTR_ERR(epd->border); if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio 'border'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n"); return ret;diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c index b439956..14361a5 100644 --- a/drivers/gpu/drm/tinydrm/st7586.c +++ b/drivers/gpu/drm/tinydrm/st7586.c @@ -187,7 +187,7 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe, mipi_dbi_hw_reset(mipi); ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f); if (ret) {
dev_err(dev, "Error sending command %d\n", ret);
DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);@@ -355,13 +355,13 @@ static int st7586_probe(struct spi_device *spi) mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(mipi->reset)) {
dev_err(dev, "Failed to get gpio 'reset'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
dev_err(dev, "Failed to get gpio 'a0'\n");
DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n");-- You received this message because you are subscribed to the Google Groups "outreachy-kernel" group. To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com. To post to this group, send email to outreachy-kernel@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/cdccf6a3-8c66-89e5-be4f-a.... For more options, visit https://groups.google.com/d/optout.
dri-devel@lists.freedesktop.org
-
Daniel Vetter -
Harsha Sharma -
Noralf Trønnes