From: Rob Clark rob@ti.com

Without these, DVI is broken.

Signed-off-by: Rob Clark rob@ti.com --- Greg, it looks like the omapdss changes which added these fields, as well as the interlaced field, where merged in Linux 3.5-rc5. So I think both this and the 'update for interlaced' patch are needed for both 3.6 and 3.5.

drivers/staging/omapdrm/omap_connector.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)

diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c index 5f4a89b..55e9c86 100644 --- a/drivers/staging/omapdrm/omap_connector.c +++ b/drivers/staging/omapdrm/omap_connector.c @@ -52,6 +52,16 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode,

if (timings->interlace) mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; }

static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, @@ -70,6 +80,20 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, timings->vbp = mode->vtotal - mode->vsync_end;

timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; + timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; + timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; }

static void omap_connector_dpms(struct drm_connector *connector, int mode)