Hello Adrien Grassein,

The patch 30e2ae943c26: "drm/bridge: Introduce LT8912B DSI to HDMI bridge" from Mar 26, 2021, leads to the following static checker warning:

drivers/gpu/drm/bridge/lontium-lt8912b.c:638 lt8912_parse_dt() warn: 'endpoint' isn't an ERR_PTR

drivers/gpu/drm/bridge/lontium-lt8912b.c 620 static int lt8912_parse_dt(struct lt8912 *lt) 621 { 622 struct gpio_desc *gp_reset; 623 struct device *dev = lt->dev; 624 int ret = 0; 625 struct device_node *port_node; 626 struct device_node *endpoint; 627 628 gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 629 if (IS_ERR(gp_reset)) { 630 ret = PTR_ERR(gp_reset); 631 if (ret != -EPROBE_DEFER) 632 dev_err(dev, "Failed to get reset gpio: %d\n", ret); 633 return ret; 634 } 635 lt->gp_reset = gp_reset; 636 637 endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1); 638 if (IS_ERR(endpoint)) {

Endpoint isn't an error pointer. You could just delete this check if you wanted and check of_property_count_u32_elems() for errors.

639 ret = PTR_ERR(endpoint); 640 goto end;

goto end is a do nothing goto. Genereally direct returns are more readable have fewer bugs (based on ten years of reviewing static analysis warnings).

641 } 642 643 lt->data_lanes = of_property_count_u32_elems(endpoint, "data-lanes");

Either way, it's probably a good idea to check if of_property_count_u32_elems() fails.

644 of_node_put(endpoint); 645 646 lt->host_node = of_graph_get_remote_node(dev->of_node, 0, -1); 647 if (!lt->host_node) { 648 dev_err(lt->dev, "%s: Failed to get remote port\n", __func__); 649 ret = -ENODEV; 650 goto end; 651 } 652 653 port_node = of_graph_get_remote_node(dev->of_node, 1, -1); 654 if (!port_node) { 655 dev_err(lt->dev, "%s: Failed to get connector port\n", __func__); 656 ret = -ENODEV; 657 goto err_free_host_node; 658 } 659 660 lt->hdmi_port = of_drm_find_bridge(port_node); 661 if (IS_ERR(lt->hdmi_port)) { 662 dev_err(lt->dev, "%s: Failed to get hdmi port\n", __func__); 663 ret = PTR_ERR(lt->hdmi_port); 664 of_node_put(lt->host_node); 665 goto end;

This should call of_node_put(port_node); then goto err_free_host_node;

666 } 667 668 if (!of_device_is_compatible(port_node, "hdmi-connector")) { 669 dev_err(lt->dev, "%s: Failed to get hdmi port\n", __func__); 670 ret = -EINVAL;

This should call of_node_put(port_node); then goto err_free_host_node; as well.

671 } 672 673 of_node_put(port_node); 674 675 end: 676 return ret; 677 678 err_free_host_node: 679 of_node_put(lt->host_node); 680 return ret; 681 }

regards, dan carpenter