This adds support for the JDI R63452 Full HD LCD panel used on the Xiaomi Mi 5 smartphone, in MIPI DSI command mode.

Signed-off-by: Raffaele Tranquillini raffaele.tranquillini@gmail.com --- drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c | 323 +++++++++++++++++++ 3 files changed, 333 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index beb581b96ecd..ea548628da86 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -177,6 +177,15 @@ config DRM_PANEL_JDI_LT070ME05000 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 24 bit per pixel.

+config DRM_PANEL_JDI_R63452 + tristate "JDI R63452 Full HD DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the JDI R63452 + DSI command mode panel as found in Xiaomi Mi 5 Devices. + config DRM_PANEL_KHADAS_TS050 tristate "Khadas TS050 panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index c8132050bcec..6ab4072dae2d 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o +obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o diff --git a/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c b/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c new file mode 100644 index 000000000000..31eafbc38ec0 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021 Raffaele Tranquillini raffaele.tranquillini@gmail.com + * + * Generated using linux-mdss-dsi-panel-driver-generator from Lineage OS device tree: + * https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1... + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +struct jdi_fhd_r63452 { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct gpio_desc *reset_gpio; + bool prepared; +}; + +static inline struct jdi_fhd_r63452 *to_jdi_fhd_r63452(struct drm_panel *panel) +{ + return container_of(panel, struct jdi_fhd_r63452, panel); +} + +#define dsi_generic_write_seq(dsi, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +#define dsi_dcs_write_seq(dsi, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static void jdi_fhd_r63452_reset(struct jdi_fhd_r63452 *ctx) +{ + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(10000, 11000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(10000, 11000); +} + +static int jdi_fhd_r63452_on(struct jdi_fhd_r63452 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + dsi_generic_write_seq(dsi, 0xb0, 0x00); + dsi_generic_write_seq(dsi, 0xd6, 0x01); + dsi_generic_write_seq(dsi, 0xec, + 0x64, 0xdc, 0xec, 0x3b, 0x52, 0x00, 0x0b, 0x0b, + 0x13, 0x15, 0x68, 0x0b, 0xb5); + dsi_generic_write_seq(dsi, 0xb0, 0x03); + + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret < 0) { + dev_err(dev, "Failed to set tear on: %d\n", ret); + return ret; + } + + dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00); + + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77); + if (ret < 0) { + dev_err(dev, "Failed to set pixel format: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x0437); + if (ret < 0) { + dev_err(dev, "Failed to set column address: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077f); + if (ret < 0) { + dev_err(dev, "Failed to set page address: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x0000); + if (ret < 0) { + dev_err(dev, "Failed to set tear scanline: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff); + if (ret < 0) { + dev_err(dev, "Failed to set display brightness: %d\n", ret); + return ret; + } + + dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24); + dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); + dsi_dcs_write_seq(dsi, MIPI_DCS_SET_CABC_MIN_BRIGHTNESS, 0x00); + dsi_dcs_write_seq(dsi, 0x84, 0x00); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display on: %d\n", ret); + return ret; + } + msleep(20); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + msleep(80); + + dsi_generic_write_seq(dsi, 0xb0, 0x04); + dsi_dcs_write_seq(dsi, 0x84, 0x00); + dsi_generic_write_seq(dsi, 0xc8, 0x11); + dsi_generic_write_seq(dsi, 0xb0, 0x03); + + return 0; +} + +static int jdi_fhd_r63452_off(struct jdi_fhd_r63452 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + dsi_generic_write_seq(dsi, 0xb0, 0x00); + dsi_generic_write_seq(dsi, 0xd6, 0x01); + dsi_generic_write_seq(dsi, 0xec, + 0x64, 0xdc, 0xec, 0x3b, 0x52, 0x00, 0x0b, 0x0b, + 0x13, 0x15, 0x68, 0x0b, 0x95); + dsi_generic_write_seq(dsi, 0xb0, 0x03); + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display off: %d\n", ret); + return ret; + } + usleep_range(2000, 3000); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); + return ret; + } + msleep(120); + + return 0; +} + +static int jdi_fhd_r63452_prepare(struct drm_panel *panel) +{ + struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + if (ctx->prepared) + return 0; + + jdi_fhd_r63452_reset(ctx); + + ret = jdi_fhd_r63452_on(ctx); + if (ret < 0) { + dev_err(dev, "Failed to initialize panel: %d\n", ret); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + return ret; + } + + ctx->prepared = true; + return 0; +} + +static int jdi_fhd_r63452_unprepare(struct drm_panel *panel) +{ + struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + if (!ctx->prepared) + return 0; + + ret = jdi_fhd_r63452_off(ctx); + if (ret < 0) + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + ctx->prepared = false; + return 0; +} + +static const struct drm_display_mode jdi_fhd_r63452_mode = { + .clock = (1080 + 120 + 16 + 40) * (1920 + 4 + 2 + 4) * 60 / 1000, + .hdisplay = 1080, + .hsync_start = 1080 + 120, + .hsync_end = 1080 + 120 + 16, + .htotal = 1080 + 120 + 16 + 40, + .vdisplay = 1920, + .vsync_start = 1920 + 4, + .vsync_end = 1920 + 4 + 2, + .vtotal = 1920 + 4 + 2 + 4, + .width_mm = 64, + .height_mm = 114, +}; + +static int jdi_fhd_r63452_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &jdi_fhd_r63452_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs jdi_fhd_r63452_panel_funcs = { + .prepare = jdi_fhd_r63452_prepare, + .unprepare = jdi_fhd_r63452_unprepare, + .get_modes = jdi_fhd_r63452_get_modes, +}; + +static int jdi_fhd_r63452_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct jdi_fhd_r63452 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "Failed to get reset-gpios\n"); + + ctx->dsi = dsi; + mipi_dsi_set_drvdata(dsi, ctx); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + drm_panel_init(&ctx->panel, dev, &jdi_fhd_r63452_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return dev_err_probe(dev, ret, "Failed to get backlight\n"); + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); + return ret; + } + + return 0; +} + +static int jdi_fhd_r63452_remove(struct mipi_dsi_device *dsi) +{ + struct jdi_fhd_r63452 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id jdi_fhd_r63452_of_match[] = { + { .compatible = "jdi,fhd-r63452" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, jdi_fhd_r63452_of_match); + +static struct mipi_dsi_driver jdi_fhd_r63452_driver = { + .probe = jdi_fhd_r63452_probe, + .remove = jdi_fhd_r63452_remove, + .driver = { + .name = "panel-jdi-fhd-r63452", + .of_match_table = jdi_fhd_r63452_of_match, + }, +}; +module_mipi_dsi_driver(jdi_fhd_r63452_driver); + +MODULE_AUTHOR("Raffaele Tranquillini raffaele.tranquillini@gmail.com"); +MODULE_DESCRIPTION("DRM driver for JDI FHD R63452 DSI panel, command mode"); +MODULE_LICENSE("GPL v2");