Hi,
This series adds driver and bindings for Lontium LT9611 bridge chip which takes MIPI DSI as input and HDMI as output.
This chip can be found in 96boards RB3 platform [1] commonly called DB845c.
[1]: https://www.96boards.org/product/rb3-platform/
Changes in v3: - fix kbuild reported error - rebase on v5.8-rc1
Changes in v2: - Add acks by Rob - Fix comments reported by Emil and rename the file to lontium-lt9611.c - Fix comments reported by Laurent on binding and driver - Add HDMI audio support
Vinod Koul (3): dt-bindings: vendor-prefixes: Add Lontium vendor prefix dt-bindings: display: bridge: Add documentation for LT9611 drm/bridge: Introduce LT9611 DSI to HDMI bridge
.../display/bridge/lontium,lt9611.yaml | 176 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt9611.c | 1219 +++++++++++++++++ 5 files changed, 1411 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c
base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407
Add prefix for Lontium Semiconductor Corporation
Acked-by: Rob Herring robh@kernel.org Signed-off-by: Vinod Koul vkoul@kernel.org --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9aeab66be85f..31cdb21a3d22 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -595,6 +595,8 @@ patternProperties: description: Logic Technologies Limited "^longcheer,.*": description: Longcheer Technology (Shanghai) Co., Ltd. + "^lontium,.*": + description: Lontium Semiconductor Corporation "^loongson,.*": description: Loongson Technology Corporation Limited "^lsi,.*":
Lontium LT9611 is a DSI to HDMI bridge which supports 2 DSI ports and I2S port as input and one HDMI port as output
Reviewed-by: Rob Herring robh@kernel.org Signed-off-by: Vinod Koul vkoul@kernel.org --- .../display/bridge/lontium,lt9611.yaml | 176 ++++++++++++++++++ 1 file changed, 176 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml new file mode 100644 index 000000000000..d60208359234 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul vkoul@kernel.org + +description: | + The LT9611 is a bridge device which converts DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Primary MIPI port-1 for MIPI input + + properties: + reg: + const: 0 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@1: + type: object + description: | + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + properties: + reg: + const: 1 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@2: + type: object + description: | + HDMI port for HDMI output + + properties: + reg: + const: 2 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +...
Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output
Co-developed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Co-developed-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul vkoul@kernel.org --- drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt9611.c | 1219 +++++++++++++++++++++++ 3 files changed, 1233 insertions(+) create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 43271c21d3fc..c7f0dacfb57a 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -48,6 +48,19 @@ config DRM_DISPLAY_CONNECTOR on ARM-based platforms. Saying Y here when this driver is not needed will not cause any issue.
+config DRM_LONTIUM_LT9611 + tristate "Lontium LT9611 DSI/HDMI bridge" + select SND_SOC_HDMI_CODEC if SND_SOC + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select REGMAP_I2C + help + Driver for Lontium LT9611 DSI to HDMI bridge + chip driver that converts dual DSI and I2S to + HDMI signals + Please say Y if you have such hardware. + config DRM_LVDS_CODEC tristate "Transparent LVDS encoders and decoders support" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index d63d4b7e4347..7d7c123a95e4 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o +obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c new file mode 100644 index 000000000000..c38f89f28651 --- /dev/null +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c @@ -0,0 +1,1219 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2019-2020. Linaro Limited. + */ + +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <sound/hdmi-codec.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_print.h> + +#define EDID_SEG_SIZE 256 +#define EDID_LEN 32 +#define EDID_LOOP 8 +#define KEY_DDC_ACCS_DONE 0x02 +#define DDC_NO_ACK 0x50 + +#define LT9611_4LANES 0 + +struct lt9611 { + struct device *dev; + struct drm_bridge bridge; + struct drm_connector connector; + + struct regmap *regmap; + + struct device_node *dsi0_node; + struct device_node *dsi1_node; + struct mipi_dsi_device *dsi0; + struct mipi_dsi_device *dsi1; + struct platform_device *audio_pdev; + + bool ac_mode; + + struct gpio_desc *reset_gpio; + struct gpio_desc *enable_gpio; + + bool power_on; + bool sleep; + + struct regulator_bulk_data supplies[2]; + + struct i2c_client *client; + + enum drm_connector_status status; + + u8 edid_buf[EDID_SEG_SIZE]; + u32 vic; +}; + +#define LT9611_PAGE_CONTROL 0xff + +static const struct regmap_range_cfg lt9611_ranges[] = { + { + .name = "register_range", + .range_min = 0, + .range_max = 0x85ff, + .selector_reg = LT9611_PAGE_CONTROL, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 0x100, + }, +}; + +static const struct regmap_config lt9611_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xffff, + .ranges = lt9611_ranges, + .num_ranges = ARRAY_SIZE(lt9611_ranges), +}; + +struct lt9611_mode { + u16 hdisplay; + u16 vdisplay; + u8 vrefresh; + u8 lanes; + u8 intfs; +}; + +static struct lt9611_mode lt9611_modes[] = { + { 3840, 2160, 30, 4, 2 }, /* 3840x2160 24bit 30Hz 4Lane 2ports */ + { 1920, 1080, 60, 4, 1 }, /* 1080P 24bit 60Hz 4lane 1port */ + { 1920, 1080, 30, 3, 1 }, /* 1080P 24bit 30Hz 3lane 1port */ + { 1920, 1080, 24, 3, 1 }, + { 720, 480, 60, 4, 1 }, + { 720, 576, 50, 2, 1 }, + { 640, 480, 60, 2, 1 }, +}; + +static struct lt9611 *bridge_to_lt9611(struct drm_bridge *bridge) +{ + return container_of(bridge, struct lt9611, bridge); +} + +static struct lt9611 *connector_to_lt9611(struct drm_connector *connector) +{ + return container_of(connector, struct lt9611, connector); +} + +static int lt9611_mipi_input_analog(struct lt9611 *lt9611) +{ + const struct reg_sequence reg_cfg[] = { + { 0x8106, 0x40 }, /*port A rx current*/ + { 0x810a, 0xfe }, /*port A ldo voltage set*/ + { 0x810b, 0xbf }, /*enable port A lprx*/ + { 0x8111, 0x40 }, /*port B rx current*/ + { 0x8115, 0xfe }, /*port B ldo voltage set*/ + { 0x8116, 0xbf }, /*enable port B lprx*/ + + { 0x811c, 0x03 }, /*PortA clk lane no-LP mode*/ + { 0x8120, 0x03 }, /*PortB clk lane with-LP mode*/ + }; + + return regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg)); +} + +static int lt9611_mipi_input_digital(struct lt9611 *lt9611, + const struct drm_display_mode *mode) +{ + struct reg_sequence reg_cfg[] = { + { 0x8300, LT9611_4LANES }, + { 0x830a, 0x00 }, + { 0x824f, 0x80 }, + { 0x8250, 0x10 }, + { 0x8302, 0x0a }, + { 0x8306, 0x0a }, + }; + + if (mode->hdisplay == 3840) + reg_cfg[1].def = 0x03; + + return regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg)); +} + +static void lt9611_mipi_video_setup(struct lt9611 *lt9611, + const struct drm_display_mode *mode) +{ + u32 h_total, h_act, hpw, hfp, hss; + u32 v_total, v_act, vpw, vfp, vss; + + h_total = mode->htotal; + v_total = mode->vtotal; + + h_act = mode->hdisplay; + hpw = mode->hsync_end - mode->hsync_start; + hfp = mode->hsync_start - mode->hdisplay; + hss = (mode->hsync_end - mode->hsync_start) + + (mode->htotal - mode->hsync_end); + + v_act = mode->vdisplay; + vpw = mode->vsync_end - mode->vsync_start; + vfp = mode->vsync_start - mode->vdisplay; + vss = (mode->vsync_end - mode->vsync_start) + + (mode->vtotal - mode->vsync_end); + + regmap_write(lt9611->regmap, 0x830d, (u8)(v_total / 256)); + regmap_write(lt9611->regmap, 0x830e, (u8)(v_total % 256)); + + regmap_write(lt9611->regmap, 0x830f, (u8)(v_act / 256)); + regmap_write(lt9611->regmap, 0x8310, (u8)(v_act % 256)); + + regmap_write(lt9611->regmap, 0x8311, (u8)(h_total / 256)); + regmap_write(lt9611->regmap, 0x8312, (u8)(h_total % 256)); + + regmap_write(lt9611->regmap, 0x8313, (u8)(h_act / 256)); + regmap_write(lt9611->regmap, 0x8314, (u8)(h_act % 256)); + + regmap_write(lt9611->regmap, 0x8315, (u8)(vpw % 256)); + regmap_write(lt9611->regmap, 0x8316, (u8)(hpw % 256)); + + regmap_write(lt9611->regmap, 0x8317, (u8)(vfp % 256)); + + regmap_write(lt9611->regmap, 0x8318, (u8)(vss % 256)); + + regmap_write(lt9611->regmap, 0x8319, (u8)(hfp % 256)); + + regmap_write(lt9611->regmap, 0x831a, (u8)(hss / 256)); + regmap_write(lt9611->regmap, 0x831b, (u8)(hss % 256)); +} + +static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode) +{ + const struct reg_sequence reg_cfg[] = { + { 0x830b, 0x01 }, + { 0x830c, 0x10 }, + { 0x8348, 0x00 }, + { 0x8349, 0x81 }, + + /* stage 1 */ + { 0x8321, 0x4a }, + { 0x8324, 0x71 }, + { 0x8325, 0x30 }, + { 0x832a, 0x01 }, + + /* stage 2 */ + { 0x834a, 0x40 }, + { 0x831d, 0x10 }, + + /* MK limit */ + { 0x832d, 0x38 }, + { 0x8331, 0x08 }, + }; + const struct reg_sequence reg_cfg2[] = { + { 0x830b, 0x03 }, + { 0x830c, 0xd0 }, + { 0x8348, 0x03 }, + { 0x8349, 0xe0 }, + { 0x8324, 0x72 }, + { 0x8325, 0x00 }, + { 0x832a, 0x01 }, + { 0x834a, 0x10 }, + { 0x831d, 0x10 }, + { 0x8326, 0x37 }, + }; + + regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg)); + + switch (mode->hdisplay) { + case 640: + regmap_write(lt9611->regmap, 0x8326, 0x14); + break; + case 1920: + regmap_write(lt9611->regmap, 0x8326, 0x37); + break; + case 3840: + regmap_multi_reg_write(lt9611->regmap, reg_cfg2, ARRAY_SIZE(reg_cfg2)); + break; + } + + /* pcr rst */ + regmap_write(lt9611->regmap, 0x8011, 0x5a); + regmap_write(lt9611->regmap, 0x8011, 0xfa); +} + +static int lt9611_pll_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode) +{ + unsigned int pclk = mode->clock; + const struct reg_sequence reg_cfg[] = { + /* txpll init */ + { 0x8123, 0x40 }, + { 0x8124, 0x64 }, + { 0x8125, 0x80 }, + { 0x8126, 0x55 }, + { 0x812c, 0x37 }, + { 0x812f, 0x01 }, + { 0x8126, 0x55 }, + { 0x8127, 0x66 }, + { 0x8128, 0x88 }, + }; + + regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg)); + + if (pclk > 150000) + regmap_write(lt9611->regmap, 0x812d, 0x88); + else if (pclk > 70000) + regmap_write(lt9611->regmap, 0x812d, 0x99); + else + regmap_write(lt9611->regmap, 0x812d, 0xaa); + + /* + * first divide pclk by 2 first + * - write divide by 64k to 19:16 bits which means shift by 17 + * - write divide by 256 to 15:8 bits which means shift by 9 + * - write remainder to 7:0 bits, which means shift by 1 + */ + regmap_write(lt9611->regmap, 0x82e3, pclk >> 17); /* pclk[19:16] */ + regmap_write(lt9611->regmap, 0x82e4, pclk >> 9); /* pclk[15:8] */ + regmap_write(lt9611->regmap, 0x82e5, pclk >> 1); /* pclk[7:0] */ + + regmap_write(lt9611->regmap, 0x82de, 0x20); + regmap_write(lt9611->regmap, 0x82de, 0xe0); + + regmap_write(lt9611->regmap, 0x8016, 0xf1); + regmap_write(lt9611->regmap, 0x8016, 0xf3); + + return 0; +} + +static int lt9611_read_video_check(struct lt9611 *lt9611, unsigned int reg) +{ + unsigned int temp, temp2; + int ret; + + ret = regmap_read(lt9611->regmap, reg, &temp); + if (ret) + return ret; + temp <<= 8; + ret = regmap_read(lt9611->regmap, reg + 1, &temp2); + if (ret) + return ret; + + return (temp + temp2); +} + +static int lt9611_video_check(struct lt9611 *lt9611) +{ + u32 v_total, v_act, h_act_a, h_act_b, h_total_sysclk; + int temp; + + /* top module video check */ + + /* v_act */ + temp = lt9611_read_video_check(lt9611, 0x8282); + if (temp < 0) + goto end; + v_act = temp; + + /* v_total */ + temp = lt9611_read_video_check(lt9611, 0x826c); + if (temp < 0) + goto end; + v_total = temp; + + /* h_total_sysclk */ + temp = lt9611_read_video_check(lt9611, 0x8286); + if (temp < 0) + goto end; + h_total_sysclk = temp; + + /* h_act_a */ + temp = lt9611_read_video_check(lt9611, 0x8382); + if (temp < 0) + goto end; + h_act_a = temp / 3; + + /* h_act_b */ + temp = lt9611_read_video_check(lt9611, 0x8386); + if (temp < 0) + goto end; + h_act_b = temp / 3; + + dev_info(lt9611->dev, + "video check: h_act_a=%d, h_act_b=%d, v_act=%d, v_total=%d, h_total_sysclk=%d\n", + h_act_a, h_act_b, v_act, v_total, h_total_sysclk); + + return 0; + +end: + dev_err(lt9611->dev, "read video check error\n"); + return temp; +} + +static void lt9611_hdmi_tx_digital(struct lt9611 *lt9611) +{ + regmap_write(lt9611->regmap, 0x8443, 0x46 - lt9611->vic); + regmap_write(lt9611->regmap, 0x8447, lt9611->vic); + regmap_write(lt9611->regmap, 0x843d, 0x0a); /* UD1 infoframe */ + + regmap_write(lt9611->regmap, 0x82d6, 0x8c); + regmap_write(lt9611->regmap, 0x82d7, 0x04); +} + +static void lt9611_hdmi_tx_phy(struct lt9611 *lt9611) +{ + struct reg_sequence reg_cfg[] = { + { 0x8130, 0x6a }, + { 0x8131, 0x44 }, /* HDMI DC mode */ + { 0x8132, 0x4a }, + { 0x8133, 0x0b }, + { 0x8134, 0x00 }, + { 0x8135, 0x00 }, + { 0x8136, 0x00 }, + { 0x8137, 0x44 }, + { 0x813f, 0x0f }, + { 0x8140, 0xa0 }, + { 0x8141, 0xa0 }, + { 0x8142, 0xa0 }, + { 0x8143, 0xa0 }, + { 0x8144, 0x0a }, + }; + + /* HDMI AC mode */ + if (lt9611->ac_mode) + reg_cfg[2].def = 0x73; + + regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg)); +} + +static irqreturn_t lt9611_irq_thread_handler(int irq, void *dev_id) +{ + struct lt9611 *lt9611 = dev_id; + unsigned int irq_flag0 = 0; + unsigned int irq_flag3 = 0; + + regmap_read(lt9611->regmap, 0x820f, &irq_flag3); + regmap_read(lt9611->regmap, 0x820c, &irq_flag0); + + pr_debug("%s() irq_flag0: %#x irq_flag3: %#x\n", + __func__, irq_flag0, irq_flag3); + + /* hpd changed low */ + if (irq_flag3 & 0x80) { + dev_info(lt9611->dev, "hdmi cable disconnected\n"); + + regmap_write(lt9611->regmap, 0x8207, 0xbf); + regmap_write(lt9611->regmap, 0x8207, 0x3f); + } + /* hpd changed high */ + if (irq_flag3 & 0x40) { + dev_info(lt9611->dev, "hdmi cable connected\n"); + + regmap_write(lt9611->regmap, 0x8207, 0x7f); + regmap_write(lt9611->regmap, 0x8207, 0x3f); + } + + if (irq_flag3 & 0xc0 && lt9611->bridge.dev) + drm_kms_helper_hotplug_event(lt9611->bridge.dev); + + /* video input changed */ + if (irq_flag0 & 0x01) { + dev_info(lt9611->dev, "video input changed\n"); + regmap_write(lt9611->regmap, 0x829e, 0xff); + regmap_write(lt9611->regmap, 0x829e, 0xf7); + regmap_write(lt9611->regmap, 0x8204, 0xff); + regmap_write(lt9611->regmap, 0x8204, 0xfe); + } + + return IRQ_HANDLED; +} + +static void lt9611_enable_hpd_interrupts(struct lt9611 *lt9611) +{ + unsigned int val; + + dev_dbg(lt9611->dev, "enabling hpd interrupts\n"); + + regmap_read(lt9611->regmap, 0x8203, &val); + + val &= ~0xc0; + regmap_write(lt9611->regmap, 0x8203, val); + regmap_write(lt9611->regmap, 0x8207, 0xff); //clear + regmap_write(lt9611->regmap, 0x8207, 0x3f); +} + +static void lt9611_sleep_setup(struct lt9611 *lt9611) +{ + const struct reg_sequence sleep_setup[] = { + { 0x8024, 0x76 }, + { 0x8023, 0x01 }, + { 0x8157, 0x03 }, //set addr pin as output + { 0x8149, 0x0b }, + { 0x8151, 0x30 }, //disable IRQ + { 0x8102, 0x48 }, //MIPI Rx power down + { 0x8123, 0x80 }, + { 0x8130, 0x00 }, + { 0x8100, 0x01 }, //bandgap power down + { 0x8101, 0x00 }, //system clk power down + }; + + dev_dbg(lt9611->dev, "sleep\n"); + + regmap_multi_reg_write(lt9611->regmap, + sleep_setup, ARRAY_SIZE(sleep_setup)); + lt9611->sleep = true; +} + +static int lt9611_power_on(struct lt9611 *lt9611) +{ + int ret; + const struct reg_sequence seq[] = { + /* LT9611_System_Init */ + { 0x8101, 0x18 }, /* sel xtal clock */ + + /* timer for frequency meter */ + { 0x821b, 0x69 }, /*timer 2*/ + { 0x821c, 0x78 }, + { 0x82cb, 0x69 }, /*timer 1 */ + { 0x82cc, 0x78 }, + + /* irq init */ + { 0x8251, 0x01 }, + { 0x8258, 0x0a }, /* hpd irq */ + { 0x8259, 0x80 }, /* hpd debounce width */ + { 0x829e, 0xf7 }, /* video check irq */ + + /* power consumption for work */ + { 0x8004, 0xf0 }, + { 0x8006, 0xf0 }, + { 0x800a, 0x80 }, + { 0x800b, 0x40 }, + { 0x800d, 0xef }, + { 0x8011, 0xfa }, + }; + + if (lt9611->power_on) + return 0; + + dev_dbg(lt9611->dev, "power on\n"); + + ret = regmap_multi_reg_write(lt9611->regmap, seq, ARRAY_SIZE(seq)); + if (!ret) + lt9611->power_on = true; + + return ret; +} + +static int lt9611_power_off(struct lt9611 *lt9611) +{ + int ret; + + dev_dbg(lt9611->dev, "power off\n"); + + ret = regmap_write(lt9611->regmap, 0x8130, 0x6a); + if (!ret) + lt9611->power_on = false; + + return ret; +} + +static void lt9611_reset(struct lt9611 *lt9611) +{ + gpiod_set_value_cansleep(lt9611->reset_gpio, 1); + msleep(20); + gpiod_set_value_cansleep(lt9611->reset_gpio, 0); + msleep(20); + gpiod_set_value_cansleep(lt9611->reset_gpio, 1); + msleep(100); +} + +static void lt9611_assert_5v(struct lt9611 *lt9611) +{ + if (!lt9611->enable_gpio) + return; + + gpiod_set_value_cansleep(lt9611->enable_gpio, 1); + msleep(20); +} + +static int lt9611_regulator_init(struct lt9611 *lt9611) +{ + int ret; + + lt9611->supplies[0].supply = "vdd"; + lt9611->supplies[1].supply = "vcc"; + ret = devm_regulator_bulk_get(lt9611->dev, 2, lt9611->supplies); + if (ret < 0) + return ret; + + return regulator_set_load(lt9611->supplies[0].consumer, 300000); +} + +static int lt9611_regulator_enable(struct lt9611 *lt9611) +{ + int ret; + + ret = regulator_enable(lt9611->supplies[0].consumer); + if (ret < 0) + return ret; + + usleep_range(1000, 10000); + + ret = regulator_enable(lt9611->supplies[1].consumer); + if (ret < 0) { + regulator_disable(lt9611->supplies[0].consumer); + return ret; + } + + return 0; +} + +static struct lt9611_mode *lt9611_find_mode(const struct drm_display_mode *mode) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lt9611_modes); i++) { + if (lt9611_modes[i].hdisplay == mode->hdisplay && + lt9611_modes[i].vdisplay == mode->vdisplay && + lt9611_modes[i].vrefresh == drm_mode_vrefresh(mode)) { + return <9611_modes[i]; + } + } + + return NULL; +} + +/* connector funcs */ +static enum drm_connector_status +lt9611_connector_detect(struct drm_connector *connector, bool force) +{ + struct lt9611 *lt9611 = connector_to_lt9611(connector); + unsigned int reg_val = 0; + int connected = 0; + + regmap_read(lt9611->regmap, 0x825e, ®_val); + connected = (reg_val & BIT(2)); + dev_dbg(lt9611->dev, "connected = %x\n", connected); + + lt9611->status = connected ? connector_status_connected : + connector_status_disconnected; + + return lt9611->status; +} + +static int lt9611_read_edid(struct lt9611 *lt9611) +{ + unsigned int temp; + int ret = 0; + int i, j; + + /* memset to clear old buffer, if any */ + memset(lt9611->edid_buf, 0, sizeof(lt9611->edid_buf)); + + regmap_write(lt9611->regmap, 0x8503, 0xc9); + + /* 0xA0 is EDID device address */ + regmap_write(lt9611->regmap, 0x8504, 0xa0); + /* 0x00 is EDID offset address */ + regmap_write(lt9611->regmap, 0x8505, 0x00); + /* length for read */ + regmap_write(lt9611->regmap, 0x8506, EDID_LEN); + regmap_write(lt9611->regmap, 0x8514, 0x7f); + + for (i = 0; i < EDID_LOOP; i++) { + /* offset address */ + regmap_write(lt9611->regmap, 0x8505, i * EDID_LEN); + regmap_write(lt9611->regmap, 0x8507, 0x36); + regmap_write(lt9611->regmap, 0x8507, 0x31); + regmap_write(lt9611->regmap, 0x8507, 0x37); + usleep_range(5000, 10000); + + regmap_read(lt9611->regmap, 0x8540, &temp); + + if (temp & KEY_DDC_ACCS_DONE) { + for (j = 0; j < EDID_LEN; j++) { + regmap_read(lt9611->regmap, 0x8583, &temp); + lt9611->edid_buf[i * EDID_LEN + j] = temp; + } + } else if (temp & DDC_NO_ACK) { /* DDC No Ack or Abitration lost */ + dev_err(lt9611->dev, "read edid failed: no ack\n"); + ret = -EIO; + goto end; + } else { + dev_err(lt9611->dev, "read edid failed: access not done\n"); + ret = -EIO; + goto end; + } + } + + dev_dbg(lt9611->dev, "read edid succeeded, checksum = 0x%x\n", + lt9611->edid_buf[EDID_SEG_SIZE - 1]); + +end: + regmap_write(lt9611->regmap, 0x8507, 0x1f); + return ret; +} + +static int +lt9611_get_edid_block(void *data, u8 *buf, unsigned int block, size_t len) +{ + struct lt9611 *lt9611 = data; + int ret; + + dev_dbg(lt9611->dev, "get edid block: block=%d, len=%d\n", + block, (int)len); + + if (len > 128) + return -EINVAL; + + /* supports up to 1 extension block */ + /* TODO: add support for more extension blocks */ + if (block > 1) + return -EINVAL; + + if (block == 0) { + ret = lt9611_read_edid(lt9611); + if (ret) { + dev_err(lt9611->dev, "edid read failed\n"); + return ret; + } + } + + block %= 2; + memcpy(buf, lt9611->edid_buf + (block * 128), len); + + return 0; +} + +static int lt9611_connector_get_modes(struct drm_connector *connector) +{ + struct lt9611 *lt9611 = connector_to_lt9611(connector); + unsigned int count; + struct edid *edid; + + dev_dbg(lt9611->dev, "get modes\n"); + + lt9611_power_on(lt9611); + edid = drm_do_get_edid(connector, lt9611_get_edid_block, lt9611); + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; +} + +static enum drm_mode_status +lt9611_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode); + + return lt9611_mode ? MODE_OK : MODE_BAD; +} + +/* bridge funcs */ +static void lt9611_bridge_enable(struct drm_bridge *bridge) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + + dev_dbg(lt9611->dev, "bridge enable\n"); + + if (lt9611_power_on(lt9611)) { + dev_err(lt9611->dev, "power on failed\n"); + return; + } + + dev_dbg(lt9611->dev, "video on\n"); + + lt9611_mipi_input_analog(lt9611); + lt9611_hdmi_tx_digital(lt9611); + lt9611_hdmi_tx_phy(lt9611); + + msleep(500); + + lt9611_video_check(lt9611); + + /* Enable HDMI output */ + regmap_write(lt9611->regmap, 0x8130, 0xea); +} + +static void lt9611_bridge_disable(struct drm_bridge *bridge) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + int ret; + + dev_dbg(lt9611->dev, "bridge disable\n"); + + /* Disable HDMI output */ + ret = regmap_write(lt9611->regmap, 0x8130, 0x6a); + if (ret) { + dev_err(lt9611->dev, "video on failed\n"); + return; + } + + if (lt9611_power_off(lt9611)) { + dev_err(lt9611->dev, "power on failed\n"); + return; + } +} + +static struct +drm_connector_helper_funcs lt9611_bridge_connector_helper_funcs = { + .get_modes = lt9611_connector_get_modes, + .mode_valid = lt9611_connector_mode_valid, +}; + +static const struct drm_connector_funcs lt9611_bridge_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = lt9611_connector_detect, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static struct mipi_dsi_device *lt9611_attach_dsi(struct lt9611 *lt9611, + struct device_node *dsi_node) +{ + const struct mipi_dsi_device_info info = { "lt9611", 0, NULL }; + struct mipi_dsi_device *dsi; + struct mipi_dsi_host *host; + int ret; + + host = of_find_mipi_dsi_host_by_node(dsi_node); + if (!host) { + dev_err(lt9611->dev, "failed to find dsi host\n"); + return ERR_PTR(-EPROBE_DEFER); + } + + dsi = mipi_dsi_device_register_full(host, &info); + if (IS_ERR(dsi)) { + dev_err(lt9611->dev, "failed to create dsi device\n"); + return dsi; + } + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_VIDEO_HSE; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(lt9611->dev, "failed to attach dsi to host\n"); + mipi_dsi_device_unregister(dsi); + return ERR_PTR(ret); + } + + return dsi; +} + +static void lt9611_bridge_detach(struct drm_bridge *bridge) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + + if (lt9611->dsi1) { + mipi_dsi_detach(lt9611->dsi1); + mipi_dsi_device_unregister(lt9611->dsi1); + } + + mipi_dsi_detach(lt9611->dsi0); + mipi_dsi_device_unregister(lt9611->dsi0); +} + +static int lt9611_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + int ret; + + dev_dbg(lt9611->dev, "bridge attach\n"); + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + + ret = drm_connector_init(bridge->dev, <9611->connector, + <9611_bridge_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) { + DRM_ERROR("Failed to initialize connector with drm\n"); + return ret; + } + + drm_connector_helper_add(<9611->connector, + <9611_bridge_connector_helper_funcs); + drm_connector_attach_encoder(<9611->connector, bridge->encoder); + + if (!bridge->encoder) { + DRM_ERROR("Parent encoder object not found"); + return -ENODEV; + } + + /* Attach primary DSI */ + lt9611->dsi0 = lt9611_attach_dsi(lt9611, lt9611->dsi0_node); + if (IS_ERR(lt9611->dsi0)) + return PTR_ERR(lt9611->dsi0); + + /* Attach secondary DSI, if specified */ + if (lt9611->dsi1_node) { + lt9611->dsi1 = lt9611_attach_dsi(lt9611, lt9611->dsi1_node); + if (IS_ERR(lt9611->dsi1)) { + ret = PTR_ERR(lt9611->dsi1); + goto err_unregister_dsi0; + } + } + + return 0; + +err_unregister_dsi0: + lt9611_bridge_detach(bridge); + drm_connector_cleanup(<9611->connector); + mipi_dsi_device_unregister(lt9611->dsi0); + + return ret; +} + +static enum drm_mode_status +lt9611_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_mode *mode) +{ + struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode); + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + + if (lt9611_mode->intfs > 1 && !lt9611->dsi1) + return MODE_PANEL; + else + return MODE_OK; +} + +static void lt9611_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + + dev_dbg(lt9611->dev, "bridge pre_enable\n"); + + if (!lt9611->sleep) + return; + + lt9611_reset(lt9611); + regmap_write(lt9611->regmap, 0x80ee, 0x01); + + lt9611->sleep = false; +} + +static void lt9611_bridge_post_disable(struct drm_bridge *bridge) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + + dev_dbg(lt9611->dev, "bridge post_disable\n"); + + lt9611_sleep_setup(lt9611); +} + +static void lt9611_bridge_mode_set(struct drm_bridge *bridge, + const struct drm_display_mode *mode, + const struct drm_display_mode *adj_mode) +{ + struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + struct hdmi_avi_infoframe avi_frame; + int ret; + + dev_dbg(lt9611->dev, "bridge mode_set: hdisplay=%d, vdisplay=%d, vrefresh=%d, clock=%d\n", + adj_mode->hdisplay, adj_mode->vdisplay, + adj_mode->vrefresh, adj_mode->clock); + + lt9611_bridge_pre_enable(bridge); + + lt9611_mipi_input_digital(lt9611, mode); + lt9611_pll_setup(lt9611, mode); + lt9611_mipi_video_setup(lt9611, mode); + lt9611_pcr_setup(lt9611, mode); + + ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, + <9611->connector, + mode); + if (!ret) + lt9611->vic = avi_frame.video_code; +} + +static const struct drm_bridge_funcs lt9611_bridge_funcs = { + .attach = lt9611_bridge_attach, + .detach = lt9611_bridge_detach, + .mode_valid = lt9611_bridge_mode_valid, + .enable = lt9611_bridge_enable, + .disable = lt9611_bridge_disable, + .post_disable = lt9611_bridge_post_disable, + .mode_set = lt9611_bridge_mode_set, +}; + +static int lt9611_parse_dt(struct device *dev, + struct lt9611 *lt9611) +{ + lt9611->dsi0_node = of_graph_get_remote_node(dev->of_node, 1, -1); + if (!lt9611->dsi0_node) { + DRM_DEV_ERROR(dev, "failed to get remote node for primary dsi\n"); + return -ENODEV; + } + + lt9611->dsi1_node = of_graph_get_remote_node(dev->of_node, 2, -1); + + lt9611->ac_mode = of_property_read_bool(dev->of_node, "lt,ac-mode"); + dev_dbg(lt9611->dev, "ac_mode=%d\n", lt9611->ac_mode); + + return 0; +} + +static int lt9611_gpio_init(struct lt9611 *lt9611) +{ + struct device *dev = lt9611->dev; + + lt9611->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(lt9611->reset_gpio)) { + dev_err(dev, "failed to acquire reset gpio\n"); + return PTR_ERR(lt9611->reset_gpio); + } + + lt9611->enable_gpio = devm_gpiod_get_optional(dev, "enable", + GPIOD_OUT_LOW); + if (IS_ERR(lt9611->enable_gpio)) { + dev_err(dev, "failed to acquire enable gpio\n"); + return PTR_ERR(lt9611->enable_gpio); + } + + return 0; +} + +static int lt9611_read_device_rev(struct lt9611 *lt9611) +{ + unsigned int rev; + int ret; + + regmap_write(lt9611->regmap, 0x80ee, 0x01); + ret = regmap_read(lt9611->regmap, 0x8002, &rev); + if (ret) + dev_err(lt9611->dev, "failed to read revision: %d\n", ret); + else + dev_info(lt9611->dev, "LT9611 revision: 0x%x\n", rev); + + return ret; +} + +static int lt9611_hdmi_hw_params(struct device *dev, void *data, + struct hdmi_codec_daifmt *fmt, + struct hdmi_codec_params *hparms) +{ + struct lt9611 *lt9611 = data; + + if (hparms->sample_rate == 48000) + regmap_write(lt9611->regmap, 0x840f, 0x2b); + else if (hparms->sample_rate == 96000) + regmap_write(lt9611->regmap, 0x840f, 0xab); + else + return -EINVAL; + + regmap_write(lt9611->regmap, 0x8435, 0x00); + regmap_write(lt9611->regmap, 0x8436, 0x18); + regmap_write(lt9611->regmap, 0x8437, 0x00); + + return 0; +} + +static int lt9611_audio_startup(struct device *dev, void *data) +{ + struct lt9611 *lt9611 = data; + + regmap_write(lt9611->regmap, 0x82d6, 0x8c); + regmap_write(lt9611->regmap, 0x82d7, 0x04); + + regmap_write(lt9611->regmap, 0x8406, 0x08); + regmap_write(lt9611->regmap, 0x8407, 0x10); + + regmap_write(lt9611->regmap, 0x8434, 0xd5); + + return 0; +} + +static void lt9611_audio_shutdown(struct device *dev, void *data) +{ + struct lt9611 *lt9611 = data; + + regmap_write(lt9611->regmap, 0x8406, 0x00); + regmap_write(lt9611->regmap, 0x8407, 0x00); +} + +static int lt9611_hdmi_i2s_get_dai_id(struct snd_soc_component *component, + struct device_node *endpoint) +{ + struct of_endpoint of_ep; + int ret; + + pr_debug("In %s: %d\n", __func__, __LINE__); + ret = of_graph_parse_endpoint(endpoint, &of_ep); + if (ret < 0) + return ret; + + /* + * HDMI sound should be located as reg = <2> + * Then, it is sound port 0 + */ + if (of_ep.port == 2) + return 0; + + return -EINVAL; +} + +static const struct hdmi_codec_ops lt9611_codec_ops = { + .hw_params = lt9611_hdmi_hw_params, + .audio_shutdown = lt9611_audio_shutdown, + .audio_startup = lt9611_audio_startup, + .get_dai_id = lt9611_hdmi_i2s_get_dai_id, +}; + +static struct hdmi_codec_pdata codec_data = { + .ops = <9611_codec_ops, + .max_i2s_channels = 8, + .i2s = 1, +}; + +static int lt9611_audio_init(struct device *dev, struct lt9611 *lt9611) +{ + codec_data.data = lt9611; + lt9611->audio_pdev = + platform_device_register_data(dev, HDMI_CODEC_DRV_NAME, + PLATFORM_DEVID_AUTO, + &codec_data, sizeof(codec_data)); + + return PTR_ERR_OR_ZERO(lt9611->audio_pdev); +} + +static void lt9611_audio_exit(struct lt9611 *lt9611) +{ + if (lt9611->audio_pdev) { + platform_device_unregister(lt9611->audio_pdev); + lt9611->audio_pdev = NULL; + } +} + +static int lt9611_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lt9611 *lt9611; + struct device *dev = &client->dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(dev, "device doesn't support I2C\n"); + return -ENODEV; + } + + lt9611 = devm_kzalloc(dev, sizeof(*lt9611), GFP_KERNEL); + if (!lt9611) + return -ENOMEM; + + lt9611->dev = &client->dev; + lt9611->client = client; + lt9611->sleep = false; + + lt9611->regmap = devm_regmap_init_i2c(client, <9611_regmap_config); + if (IS_ERR(lt9611->regmap)) { + DRM_ERROR("regmap i2c init failed\n"); + return PTR_ERR(lt9611->regmap); + } + + ret = lt9611_parse_dt(&client->dev, lt9611); + if (ret) { + dev_err(dev, "failed to parse device tree\n"); + return ret; + } + + ret = lt9611_gpio_init(lt9611); + if (ret < 0) + goto err_of_put; + + ret = lt9611_regulator_init(lt9611); + if (ret < 0) + goto err_of_put; + + lt9611_assert_5v(lt9611); + + ret = lt9611_regulator_enable(lt9611); + if (ret) + goto err_of_put; + + lt9611_reset(lt9611); + + ret = lt9611_read_device_rev(lt9611); + if (ret) { + dev_err(dev, "failed to read chip rev\n"); + goto err_disable_regulators; + } + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + lt9611_irq_thread_handler, + IRQF_ONESHOT, "lt9611", lt9611); + if (ret) { + dev_err(dev, "failed to request irq\n"); + goto err_disable_regulators; + } + + i2c_set_clientdata(client, lt9611); + + lt9611->bridge.funcs = <9611_bridge_funcs; + lt9611->bridge.of_node = client->dev.of_node; + + drm_bridge_add(<9611->bridge); + + lt9611_enable_hpd_interrupts(lt9611); + + return lt9611_audio_init(dev, lt9611); + +err_disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(lt9611->supplies), lt9611->supplies); + +err_of_put: + of_node_put(lt9611->dsi1_node); + of_node_put(lt9611->dsi0_node); + + return ret; +} + +static int lt9611_remove(struct i2c_client *client) +{ + struct lt9611 *lt9611 = i2c_get_clientdata(client); + + disable_irq(client->irq); + lt9611_audio_exit(lt9611); + drm_bridge_remove(<9611->bridge); + + regulator_bulk_disable(ARRAY_SIZE(lt9611->supplies), lt9611->supplies); + + of_node_put(lt9611->dsi1_node); + of_node_put(lt9611->dsi0_node); + + return 0; +} + +static struct i2c_device_id lt9611_id[] = { + { "lontium,lt9611", 0 }, + {} +}; + +static const struct of_device_id lt9611_match_table[] = { + { .compatible = "lontium,lt9611" }, + { } +}; +MODULE_DEVICE_TABLE(of, lt9611_match_table); + +static struct i2c_driver lt9611_driver = { + .driver = { + .name = "lt9611", + .of_match_table = lt9611_match_table, + }, + .probe = lt9611_probe, + .remove = lt9611_remove, + .id_table = lt9611_id, +}; +module_i2c_driver(lt9611_driver); + +MODULE_LICENSE("GPL v2");
Hi Vinod.
Looks good but some some of small nits. And a few larger things in the following. The larger things is releated to prepare the bridge driver to live in a world with chained bridges.
Sam
On Wed, Jun 17, 2020 at 04:29:50PM +0530, Vinod Koul wrote:
Please add empty lines between each group of includes. They are already sorted within each group and in preferred order - good.
Add space after "/*" and before closing "*/". Like is done a few lines up in lt9611_modes[]
Please check if some of these constants be replaced by something readable from the datasheet. Same goes for other places where constants are used.
Using the names from display_timings would make this easier to recognize for the reader. Examples: vfp versus vfront_porch vss versus vsync_len
I do not say the names from display_timing are much better, only that they are more recognizeable.
debug artifact you can delete now?
Drop extra space in indent of this comment and following comments as well.
debug artifact you can delete now?
Some people are not happy with c++ comments. Also add space.
Ditto, both c++ comments and space.
debug artifact? I will not repeat this, but evaluate all the deb_dbg() uses.
Please fix bridge so connector creation is optional. for new bridge driver this is mandatory.
Add relevant bridge functions - .get_edid, .detect looks like candidates. See other bridge drivers for inspiration.
In other places dev_xxx is used, please be consistent and use dev_err() here.
Hello Sam,
On 20-06-20, 20:05, Sam Ravnborg wrote:
Hi Vinod.
Looks good but some some of small nits.
Great :)
Sure, so that entails adding the callbacks specified below right or is there anything else required to do?
Okay if that is the preference, sure
Oops seems to have missed these, will fix this and others if any
The problem is that the datasheet I have doesn't define register names. Worse some of them are not even documented. I did give it a shot to define these, but gave up half way due to lack on inventive names :(
I would like to keep the registers and replace them in future if we get a good spec from vendor.. or i can define REG_1...REG_N!
okay will do
Okay, will remove this and rest
Ok
Can you elaborate what is means by fixing bridge here, what are the things that should be done and are expected for new bridge drivers
Any good examples?
On Wed, Jun 17, 2020 at 4:00 AM Vinod Koul vkoul@kernel.org wrote:
Hey Vinod, Thanks for pushing these! I know same-company tags aren't super valuable, but I'm actively using these patches for HDMI/audio support on the db845c w/ AOSP.
So for what it's worth, for the series: Tested-by: John Stultz john.stultz@linaro.org
thanks -john
dri-devel@lists.freedesktop.org
-
John Stultz -
Sam Ravnborg -
Vinod Koul