Assign drm_atomic_helper_crtc_set_property helper to MDP4 and MDP5 crtcs' set_property ops. This replaces the custom funcs that returned an error even for standard crtc properties.

Signed-off-by: Archit Taneja architt@codeaurora.org Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch --- drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c | 9 +-------- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 9 +-------- 2 files changed, 2 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c index 909d742..c77e3d4 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c @@ -361,13 +361,6 @@ static void mdp4_crtc_atomic_flush(struct drm_crtc *crtc, request_pending(crtc, PENDING_FLIP); }

-static int mdp4_crtc_set_property(struct drm_crtc *crtc, - struct drm_property *property, uint64_t val) -{ - // XXX - return -EINVAL; -} - #define CURSOR_WIDTH 64 #define CURSOR_HEIGHT 64

@@ -499,7 +492,7 @@ static const struct drm_crtc_funcs mdp4_crtc_funcs = { .set_config = drm_atomic_helper_set_config, .destroy = mdp4_crtc_destroy, .page_flip = drm_atomic_helper_page_flip, - .set_property = mdp4_crtc_set_property, + .set_property = drm_atomic_helper_crtc_set_property, .cursor_set = mdp4_crtc_cursor_set, .cursor_move = mdp4_crtc_cursor_move, .reset = drm_atomic_helper_crtc_reset, diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index 46682aa..a064d97 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -468,13 +468,6 @@ static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc, request_pending(crtc, PENDING_FLIP); }

-static int mdp5_crtc_set_property(struct drm_crtc *crtc, - struct drm_property *property, uint64_t val) -{ - // XXX - return -EINVAL; -} - static void get_roi(struct drm_crtc *crtc, uint32_t *roi_w, uint32_t *roi_h) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); @@ -625,7 +618,7 @@ static const struct drm_crtc_funcs mdp5_crtc_funcs = { .set_config = drm_atomic_helper_set_config, .destroy = mdp5_crtc_destroy, .page_flip = drm_atomic_helper_page_flip, - .set_property = mdp5_crtc_set_property, + .set_property = drm_atomic_helper_crtc_set_property, .reset = drm_atomic_helper_crtc_reset, .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,

From: Sricharan R sricharan@codeaurora.org

attach_dev gets called in mdp4_kms_init, but there is no corresponding detach_dev called in the error path or in the kms driver unload path.

Detach and destroy mmu in mdp4_destroy.

Signed-off-by: Sricharan R sricharan@codeaurora.org Signed-off-by: Archit Taneja architt@codeaurora.org --- drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c | 17 +++++++++++++---- drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h | 1 + 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c index 1c8e330..54b9d9b 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c @@ -179,9 +179,20 @@ static long mdp4_round_pixclk(struct msm_kms *kms, unsigned long rate, } }

+static const char * const iommu_ports[] = { + "mdp_port0_cb0", "mdp_port1_cb0", +}; + static void mdp4_destroy(struct msm_kms *kms) { struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms)); + struct msm_mmu *mmu = mdp4_kms->mmu; + + if (mmu) { + mmu->funcs->detach(mmu, iommu_ports, ARRAY_SIZE(iommu_ports)); + mmu->funcs->destroy(mmu); + } + if (mdp4_kms->blank_cursor_iova) msm_gem_put_iova(mdp4_kms->blank_cursor_bo, mdp4_kms->id); if (mdp4_kms->blank_cursor_bo) @@ -446,10 +457,6 @@ fail: return ret; }

-static const char *iommu_ports[] = { - "mdp_port0_cb0", "mdp_port1_cb0", -}; - struct msm_kms *mdp4_kms_init(struct drm_device *dev) { struct platform_device *pdev = dev->platformdev; @@ -554,6 +561,8 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev) ARRAY_SIZE(iommu_ports)); if (ret) goto fail; + + mdp4_kms->mmu = mmu; } else { dev_info(dev->dev, "no iommu, fallback to phys " "contig buffers for scanout\n"); diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h index 9ec53b4..b282871 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h @@ -45,6 +45,7 @@ struct mdp4_kms { struct clk *pclk; struct clk *lut_clk; struct clk *axi_clk; + struct msm_mmu *mmu;

struct mdp_irq error_handler;

With the implementation of of_graph parsing, it isn't any longer necessary for msm_host->device node to be same as dsi->dev.of_node. This only holds true when the connected device is also a child of the dsi_host.

In the case of external bridge chips belonging to a different control bus, these are guaranteed to be different.

Signed-off-by: Archit Taneja architt@codeaurora.org --- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 48f9967..69bac59 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1484,8 +1484,6 @@ static int dsi_host_attach(struct mipi_dsi_host *host, msm_host->format = dsi->format; msm_host->mode_flags = dsi->mode_flags;

- WARN_ON(dsi->dev.of_node != msm_host->device_node); - /* Some gpios defined in panel DT need to be controlled by host */ ret = dsi_host_init_panel_gpios(msm_host, &dsi->dev); if (ret)

The DSI driver is currently unaware of how the DSI physical data lanes are mapped to the logical lanes provided by the DSI controller.

Create a DT binding "qcom,data-lane-map" that provides this information on a given platform.

The MSM DSI controller is restricted in terms of what all mappings it can support. The lane polarity is fixed for all the lanes, the clock lanes are fixed, and the data lanes can be swapped among each other only for a few combinations. Apply these restrictions when we parse the DT data.

Cc: devicetree@vger.kernel.org Cc: Rob Herring robh@kernel.org Cc: Tomi Valkeinen tomi.valkeinen@ti.com

Signed-off-by: Archit Taneja architt@codeaurora.org --- .../devicetree/bindings/display/msm/dsi.txt | 32 +++++- drivers/gpu/drm/msm/dsi/dsi_host.c | 116 +++++++++++++++++---- 2 files changed, 125 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index e7423be..f5948c4 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -44,9 +44,34 @@ Optional properties: - pinctrl-names: the pin control state names; should contain "default" - pinctrl-0: the default pinctrl state (active) - pinctrl-n: the "sleep" pinctrl state -- port: DSI controller output port. This contains one endpoint subnode, with its - remote-endpoint set to the phandle of the connected panel's endpoint. - See Documentation/devicetree/bindings/graph.txt for device graph info. +- port: DSI controller output port, containing one endpoint subnode. + + DSI Endpoint properties: + - remote-endpoint: set to phandle of the connected panel's endpoint. + See Documentation/devicetree/bindings/graph.txt for device graph info. + - qcom,data-lane-map: this describes how the logical DSI lanes are mapped + to the physical lanes on the given platform. The value contained in + index n describes what logical data lane is mapped to the physical data + lane n (DATAn, where n lies between 0 and 3). + + For example: + + qcom,data-lane-map = <3 0 1 2>; + + The above mapping describes that the logical data lane DATA3 is mapped to + the physical data lane DATA0, logical DATA0 to physical DATA1, logic DATA1 + to phys DATA2 and logic DATA2 to phys DATA3. + + There are only a limited number of physical to logical mappings possible: + + "0123": Logic 0->Phys 0; Logic 1->Phys 1; Logic 2->Phys 2; Logic 3->Phys 3; + "3012": Logic 3->Phys 0; Logic 0->Phys 1; Logic 1->Phys 2; Logic 2->Phys 3; + "2301": Logic 2->Phys 0; Logic 3->Phys 1; Logic 0->Phys 2; Logic 1->Phys 3; + "1230": Logic 1->Phys 0; Logic 2->Phys 1; Logic 3->Phys 2; Logic 0->Phys 3; + "0321": Logic 0->Phys 0; Logic 3->Phys 1; Logic 2->Phys 2; Logic 1->Phys 3; + "1032": Logic 1->Phys 0; Logic 0->Phys 1; Logic 3->Phys 2; Logic 2->Phys 3; + "2103": Logic 2->Phys 0; Logic 1->Phys 1; Logic 0->Phys 2; Logic 3->Phys 3; + "3210": Logic 3->Phys 0; Logic 2->Phys 1; Logic 1->Phys 2; Logic 0->Phys 3;

DSI PHY: Required properties: @@ -131,6 +156,7 @@ Example: port { dsi0_out: endpoint { remote-endpoint = <&panel_in>; + lanes = <0 1 2 3>; }; }; }; diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 69bac59..4282ec6 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -163,6 +163,10 @@ struct msm_dsi_host { enum mipi_dsi_pixel_format format; unsigned long mode_flags;

+ /* lane data parsed via DT */ + int dlane_swap; + int num_data_lanes; + u32 dma_cmd_ctrl_restore;

bool registered; @@ -845,19 +849,10 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable, data = DSI_CTRL_CLK_EN;

DBG("lane number=%d", msm_host->lanes); - if (msm_host->lanes == 2) { - data |= DSI_CTRL_LANE1 | DSI_CTRL_LANE2; - /* swap lanes for 2-lane panel for better performance */ - dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL, - DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(LANE_SWAP_1230)); - } else { - /* Take 4 lanes as default */ - data |= DSI_CTRL_LANE0 | DSI_CTRL_LANE1 | DSI_CTRL_LANE2 | - DSI_CTRL_LANE3; - /* Do not swap lanes for 4-lane panel */ - dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL, - DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(LANE_SWAP_0123)); - } + data |= ((DSI_CTRL_LANE0 << msm_host->lanes) - DSI_CTRL_LANE0); + + dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL, + DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(msm_host->dlane_swap));

if (!(flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)) dsi_write(msm_host, REG_DSI_LANE_CTRL, @@ -1479,6 +1474,9 @@ static int dsi_host_attach(struct mipi_dsi_host *host, struct msm_dsi_host *msm_host = to_msm_dsi_host(host); int ret;

+ if (dsi->lanes > msm_host->num_data_lanes) + return -EINVAL; + msm_host->channel = dsi->channel; msm_host->lanes = dsi->lanes; msm_host->format = dsi->format; @@ -1532,6 +1530,75 @@ static struct mipi_dsi_host_ops dsi_host_ops = { .transfer = dsi_host_transfer, };

+/* + * List of supported physical to logical lane mappings. + * For example, the 2nd entry represents the following mapping: + * + * "3012": Logic 3->Phys 0; Logic 0->Phys 1; Logic 1->Phys 2; Logic 2->Phys 3; + */ +static const int supported_data_lane_swaps[][4] = { + { 0, 1, 2, 3 }, + { 3, 0, 1, 2 }, + { 2, 3, 0, 1 }, + { 1, 2, 3, 0 }, + { 0, 3, 2, 1 }, + { 1, 0, 3, 2 }, + { 2, 1, 0, 3 }, + { 3, 2, 1, 0 }, +}; + +static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host, + struct device_node *ep) +{ + struct device *dev = &msm_host->pdev->dev; + struct property *prop; + u32 lane_map[4]; + int ret, i, len, num_lanes; + + prop = of_find_property(ep, "qcom,data-lane-map", &len); + if (!prop) { + dev_dbg(dev, "failed to find data lane mapping\n"); + return -EINVAL; + } + + num_lanes = len / sizeof(u32); + + if (num_lanes < 1 || num_lanes > 4) { + dev_err(dev, "bad number of data lanes\n"); + return -EINVAL; + } + + msm_host->num_data_lanes = num_lanes; + + ret = of_property_read_u32_array(ep, "qcom,data-lane-map", lane_map, + num_lanes); + if (ret) { + dev_err(dev, "failed to read lane data\n"); + return ret; + } + + /* + * compare DT specified physical-logical lane mappings with the ones + * supported by hardware + */ + for (i = 0; i < ARRAY_SIZE(supported_data_lane_swaps); i++) { + const int *swap = supported_data_lane_swaps[i]; + int j; + + for (j = 0; j < num_lanes; j++) { + if (swap[j] != lane_map[j]) + break; + } + + if (j == num_lanes) { + msm_host->dlane_swap = i; + return 0; + } + } + + return -EINVAL; +} + static int dsi_host_parse_dt(struct msm_dsi_host *msm_host) { struct device *dev = &msm_host->pdev->dev; @@ -1558,17 +1625,21 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host) return 0; }

+ ret = dsi_host_parse_lane_data(msm_host, endpoint); + if (ret) { + dev_err(dev, "%s: invalid lane configuration %d\n", + __func__, ret); + goto err; + } + /* Get panel node from the output port's endpoint data */ device_node = of_graph_get_remote_port_parent(endpoint); if (!device_node) { dev_err(dev, "%s: no valid device\n", __func__); - of_node_put(endpoint); - return -ENODEV; + ret = -ENODEV; + goto err; }

- of_node_put(endpoint); - of_node_put(device_node); - msm_host->device_node = device_node;

if (of_property_read_bool(np, "syscon-sfpb")) { @@ -1577,11 +1648,16 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host) if (IS_ERR(msm_host->sfpb)) { dev_err(dev, "%s: failed to get sfpb regmap\n", __func__); - return PTR_ERR(msm_host->sfpb); + ret = PTR_ERR(msm_host->sfpb); } }

- return 0; + of_node_put(device_node); + +err: + of_node_put(endpoint); + + return ret; }

int msm_dsi_host_init(struct msm_dsi *msm_dsi)