HPD regulators need to be enabled before clocks, otherwise clock driver will report warning.
Change-Id: Ieca41722ae3b15873e6290649a21bbd13e1a4278 Signed-off-by: Jilai Wang jilaiw@codeaurora.org --- drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 45 +++++++++++++------------------ 1 file changed, 18 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c index 92fddd8..caa1301 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c @@ -141,6 +141,15 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector) uint32_t hpd_ctrl; int i, ret;
+ for (i = 0; i < config->hpd_reg_cnt; i++) { + ret = regulator_enable(hdmi->hpd_regs[i]); + if (ret) { + dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n", + config->hpd_reg_names[i], ret); + goto fail; + } + } + ret = gpio_config(hdmi, true); if (ret) { dev_err(dev->dev, "failed to configure GPIOs: %d\n", ret); @@ -164,15 +173,6 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector) } }
- for (i = 0; i < config->hpd_reg_cnt; i++) { - ret = regulator_enable(hdmi->hpd_regs[i]); - if (ret) { - dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n", - config->hpd_reg_names[i], ret); - goto fail; - } - } - hdmi_set_mode(hdmi, false); phy->funcs->reset(phy); hdmi_set_mode(hdmi, true); @@ -200,7 +200,7 @@ fail: return ret; }
-static int hdp_disable(struct hdmi_connector *hdmi_connector) +static void hdp_disable(struct hdmi_connector *hdmi_connector) { struct hdmi *hdmi = hdmi_connector->hdmi; const struct hdmi_platform_config *config = hdmi->config; @@ -212,28 +212,19 @@ static int hdp_disable(struct hdmi_connector *hdmi_connector)
hdmi_set_mode(hdmi, false);
- for (i = 0; i < config->hpd_reg_cnt; i++) { - ret = regulator_disable(hdmi->hpd_regs[i]); - if (ret) { - dev_err(dev->dev, "failed to disable hpd regulator: %s (%d)\n", - config->hpd_reg_names[i], ret); - goto fail; - } - } - for (i = 0; i < config->hpd_clk_cnt; i++) clk_disable_unprepare(hdmi->hpd_clks[i]);
ret = gpio_config(hdmi, false); - if (ret) { - dev_err(dev->dev, "failed to unconfigure GPIOs: %d\n", ret); - goto fail; - } - - return 0; + if (ret) + dev_warn(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
-fail: - return ret; + for (i = 0; i < config->hpd_reg_cnt; i++) { + ret = regulator_disable(hdmi->hpd_regs[i]); + if (ret) + dev_warn(dev->dev, "failed to disable hpd regulator: %s (%d)\n", + config->hpd_reg_names[i], ret); + } }
static void
Hi Jilai,
On 11/26/2014 03:16 PM, Jilai Wang wrote:
HPD regulators need to be enabled before clocks, otherwise clock driver will report warning.
Change-Id: Ieca41722ae3b15873e6290649a21bbd13e1a4278
Nit: The upstream preference is to omit Change-Id lines. You should be able to move .git/hooks/commit-msg to an alternate location and amend the patch to remove it. Upstream checkpatch should warn about this--let me know if it's not working properly.
Regards, Chris
dri-devel@lists.freedesktop.org