This series display port phy drivers and separated from [1] which is original from Guillaume. The display port driver is [2].
Changes for v11: 1. Fix register definition.
[1]:https://lore.kernel.org/all/20220523104758.29531-1-granquet@baylibre.com/ [2]:https://lore.kernel.org/all/20220610105522.13449-1-rex-bc.chen@mediatek.com/
Markus Schneider-Pargmann (1): phy: phy-mtk-dp: Add driver for DP phy
MAINTAINERS | 1 + drivers/phy/mediatek/Kconfig | 8 ++ drivers/phy/mediatek/Makefile | 1 + drivers/phy/mediatek/phy-mtk-dp.c | 202 ++++++++++++++++++++++++++++++ 4 files changed, 212 insertions(+) create mode 100644 drivers/phy/mediatek/phy-mtk-dp.c
From: Markus Schneider-Pargmann msp@baylibre.com
This is a new driver that supports the integrated DisplayPort phy for mediatek SoCs, especially the mt8195. The phy is integrated into the DisplayPort controller and will be created by the mtk-dp driver. This driver expects a struct regmap to be able to work on the same registers as the DisplayPort controller. It sets the device data to be the struct phy so that the DisplayPort controller can easily work with it.
The driver does not have any devicetree bindings because the datasheet does not list the controller and the phy as distinct units.
The interaction with the controller can be covered by the configure callback of the phy framework and its displayport parameters.
Signed-off-by: Markus Schneider-Pargmann msp@baylibre.com Signed-off-by: Guillaume Ranquet granquet@baylibre.com [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen rex-bc.chen@mediatek.com --- MAINTAINERS | 1 + drivers/phy/mediatek/Kconfig | 8 ++ drivers/phy/mediatek/Makefile | 1 + drivers/phy/mediatek/phy-mtk-dp.c | 202 ++++++++++++++++++++++++++++++ 4 files changed, 212 insertions(+) create mode 100644 drivers/phy/mediatek/phy-mtk-dp.c
diff --git a/MAINTAINERS b/MAINTAINERS index a6d3bd9d2a8d..f1460ee9ce83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6698,6 +6698,7 @@ L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Supported F: Documentation/devicetree/bindings/display/mediatek/ F: drivers/gpu/drm/mediatek/ +F: drivers/phy/mediatek/phy-mtk-dp.c F: drivers/phy/mediatek/phy-mtk-hdmi* F: drivers/phy/mediatek/phy-mtk-mipi*
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 55f8e6c048ab..d631525d12e1 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -55,3 +55,11 @@ config PHY_MTK_MIPI_DSI select GENERIC_PHY help Support MIPI DSI for Mediatek SoCs. + +config PHY_MTK_DP + tristate "MediaTek DP-PHY Driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF + select GENERIC_PHY + help + Support DisplayPort PHY for MediaTek SoCs. diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile index ace660fbed3a..4ba1e0650434 100644 --- a/drivers/phy/mediatek/Makefile +++ b/drivers/phy/mediatek/Makefile @@ -3,6 +3,7 @@ # Makefile for the phy drivers. #
+obj-$(CONFIG_PHY_MTK_DP) += phy-mtk-dp.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c new file mode 100644 index 000000000000..c4d5ca1719a4 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-dp.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MediaTek DisplayPort PHY driver + * + * Copyright (c) 2022 BayLibre + * Copyright (c) 2022 MediaTek + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define PHY_OFFSET 0x1000 + +#define MTK_DP_PHY_DIG_PLL_CTL_1 (PHY_OFFSET + 0x14) +#define TPLL_SSC_EN BIT(3) + +#define MTK_DP_PHY_DIG_BIT_RATE (PHY_OFFSET + 0x3C) +#define BIT_RATE_RBR 0 +#define BIT_RATE_HBR 1 +#define BIT_RATE_HBR2 2 +#define BIT_RATE_HBR3 3 + +#define MTK_DP_PHY_DIG_SW_RST (PHY_OFFSET + 0x38) +#define DP_GLB_SW_RST_PHYD BIT(0) + +#define MTK_DP_LANE0_DRIVING_PARAM_3 (PHY_OFFSET + 0x138) +#define MTK_DP_LANE1_DRIVING_PARAM_3 (PHY_OFFSET + 0x238) +#define MTK_DP_LANE2_DRIVING_PARAM_3 (PHY_OFFSET + 0x338) +#define MTK_DP_LANE3_DRIVING_PARAM_3 (PHY_OFFSET + 0x438) +#define XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT BIT(4) +#define XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT (BIT(10) | BIT(12)) +#define XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT GENMASK(20, 19) +#define XTP_LN_TX_LCTXC0_SW0_PRE3_DEFAULT GENMASK(29, 29) +#define DRIVING_PARAM_3_DEFAULT (XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW0_PRE3_DEFAULT) + +#define XTP_LN_TX_LCTXC0_SW1_PRE0_DEFAULT GENMASK(4, 3) +#define XTP_LN_TX_LCTXC0_SW1_PRE1_DEFAULT GENMASK(12, 9) +#define XTP_LN_TX_LCTXC0_SW1_PRE2_DEFAULT (BIT(18) | BIT(21)) +#define XTP_LN_TX_LCTXC0_SW2_PRE0_DEFAULT GENMASK(29, 29) +#define DRIVING_PARAM_4_DEFAULT (XTP_LN_TX_LCTXC0_SW1_PRE0_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW1_PRE1_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW1_PRE2_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW2_PRE0_DEFAULT) + +#define XTP_LN_TX_LCTXC0_SW2_PRE1_DEFAULT (BIT(3) | BIT(5)) +#define XTP_LN_TX_LCTXC0_SW3_PRE0_DEFAULT GENMASK(13, 12) +#define DRIVING_PARAM_5_DEFAULT (XTP_LN_TX_LCTXC0_SW2_PRE1_DEFAULT | \ + XTP_LN_TX_LCTXC0_SW3_PRE0_DEFAULT) + +#define XTP_LN_TX_LCTXCP1_SW0_PRE0_DEFAULT 0 +#define XTP_LN_TX_LCTXCP1_SW0_PRE1_DEFAULT GENMASK(10, 10) +#define XTP_LN_TX_LCTXCP1_SW0_PRE2_DEFAULT GENMASK(19, 19) +#define XTP_LN_TX_LCTXCP1_SW0_PRE3_DEFAULT GENMASK(28, 28) +#define DRIVING_PARAM_6_DEFAULT (XTP_LN_TX_LCTXCP1_SW0_PRE0_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW0_PRE1_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW0_PRE2_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW0_PRE3_DEFAULT) + +#define XTP_LN_TX_LCTXCP1_SW1_PRE0_DEFAULT 0 +#define XTP_LN_TX_LCTXCP1_SW1_PRE1_DEFAULT GENMASK(10, 9) +#define XTP_LN_TX_LCTXCP1_SW1_PRE2_DEFAULT GENMASK(19, 18) +#define XTP_LN_TX_LCTXCP1_SW2_PRE0_DEFAULT 0 +#define DRIVING_PARAM_7_DEFAULT (XTP_LN_TX_LCTXCP1_SW1_PRE0_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW1_PRE1_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW1_PRE2_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW2_PRE0_DEFAULT) + +#define XTP_LN_TX_LCTXCP1_SW2_PRE1_DEFAULT GENMASK(3, 3) +#define XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT 0 +#define DRIVING_PARAM_8_DEFAULT (XTP_LN_TX_LCTXCP1_SW2_PRE1_DEFAULT | \ + XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT) + +struct mtk_dp_phy { + struct regmap *regs; +}; + +static int mtk_dp_phy_init(struct phy *phy) +{ + struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy); + u32 driving_params[] = { + DRIVING_PARAM_3_DEFAULT, + DRIVING_PARAM_4_DEFAULT, + DRIVING_PARAM_5_DEFAULT, + DRIVING_PARAM_6_DEFAULT, + DRIVING_PARAM_7_DEFAULT, + DRIVING_PARAM_8_DEFAULT + }; + + regmap_bulk_write(dp_phy->regs, MTK_DP_LANE0_DRIVING_PARAM_3, + driving_params, ARRAY_SIZE(driving_params)); + regmap_bulk_write(dp_phy->regs, MTK_DP_LANE1_DRIVING_PARAM_3, + driving_params, ARRAY_SIZE(driving_params)); + regmap_bulk_write(dp_phy->regs, MTK_DP_LANE2_DRIVING_PARAM_3, + driving_params, ARRAY_SIZE(driving_params)); + regmap_bulk_write(dp_phy->regs, MTK_DP_LANE3_DRIVING_PARAM_3, + driving_params, ARRAY_SIZE(driving_params)); + + return 0; +} + +static int mtk_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) +{ + struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy); + u32 val; + + if (opts->dp.set_rate) { + switch (opts->dp.link_rate) { + default: + dev_err(&phy->dev, + "Implementation error, unknown linkrate %x\n", + opts->dp.link_rate); + return -EINVAL; + case 1620: + val = BIT_RATE_RBR; + break; + case 2700: + val = BIT_RATE_HBR; + break; + case 5400: + val = BIT_RATE_HBR2; + break; + case 8100: + val = BIT_RATE_HBR3; + break; + } + regmap_write(dp_phy->regs, MTK_DP_PHY_DIG_BIT_RATE, val); + } + + regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_PLL_CTL_1, + TPLL_SSC_EN, opts->dp.ssc ? TPLL_SSC_EN : 0); + + return 0; +} + +static int mtk_dp_phy_reset(struct phy *phy) +{ + struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy); + + regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_SW_RST, + DP_GLB_SW_RST_PHYD, 0); + usleep_range(50, 200); + regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_SW_RST, + DP_GLB_SW_RST_PHYD, 1); + + return 0; +} + +static const struct phy_ops mtk_dp_phy_dev_ops = { + .init = mtk_dp_phy_init, + .configure = mtk_dp_phy_configure, + .reset = mtk_dp_phy_reset, + .owner = THIS_MODULE, +}; + +static int mtk_dp_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_dp_phy *dp_phy; + struct phy *phy; + struct regmap *regs; + + regs = *(struct regmap **)dev->platform_data; + if (!regs) + return dev_err_probe(dev, EINVAL, + "No data passed, requires struct regmap**\n"); + + dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL); + if (!dp_phy) + return -ENOMEM; + + dp_phy->regs = regs; + phy = devm_phy_create(dev, NULL, &mtk_dp_phy_dev_ops); + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "Failed to create DP PHY\n"); + + phy_set_drvdata(phy, dp_phy); + if (!dev->of_node) + phy_create_lookup(phy, "dp", dev_name(dev)); + + return 0; +} + +struct platform_driver mtk_dp_phy_driver = { + .probe = mtk_dp_phy_probe, + .driver = { + .name = "mediatek-dp-phy", + }, +}; +module_platform_driver(mtk_dp_phy_driver); + +MODULE_AUTHOR("Markus Schneider-Pargmann msp@baylibre.com"); +MODULE_DESCRIPTION("MediaTek DP PHY Driver"); +MODULE_LICENSE("GPL");
Il 13/06/22 09:26, Bo-Chen Chen ha scritto:
From: Markus Schneider-Pargmann msp@baylibre.com
This is a new driver that supports the integrated DisplayPort phy for mediatek SoCs, especially the mt8195. The phy is integrated into the DisplayPort controller and will be created by the mtk-dp driver. This driver expects a struct regmap to be able to work on the same registers as the DisplayPort controller. It sets the device data to be the struct phy so that the DisplayPort controller can easily work with it.
The driver does not have any devicetree bindings because the datasheet does not list the controller and the phy as distinct units.
The interaction with the controller can be covered by the configure callback of the phy framework and its displayport parameters.
Signed-off-by: Markus Schneider-Pargmann msp@baylibre.com Signed-off-by: Guillaume Ranquet granquet@baylibre.com [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen rex-bc.chen@mediatek.com
There's no power_on()/power_off() callbacks and looks a bit weird, but it's also right... the only thing that's missing, IMO, is a comment in the actual file explaining that power for this PHY is always on when the DP block is on and that no PHY specific power sequence has to be carried on (being managed elsewhere and strongly tied to the specific DP IP).
Besides that,
Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com
On Mon, 2022-06-13 at 12:39 +0200, AngeloGioacchino Del Regno wrote:
Il 13/06/22 09:26, Bo-Chen Chen ha scritto:
From: Markus Schneider-Pargmann msp@baylibre.com
This is a new driver that supports the integrated DisplayPort phy for mediatek SoCs, especially the mt8195. The phy is integrated into the DisplayPort controller and will be created by the mtk-dp driver. This driver expects a struct regmap to be able to work on the same registers as the DisplayPort controller. It sets the device data to be the struct phy so that the DisplayPort controller can easily work with it.
The driver does not have any devicetree bindings because the datasheet does not list the controller and the phy as distinct units.
The interaction with the controller can be covered by the configure callback of the phy framework and its displayport parameters.
Signed-off-by: Markus Schneider-Pargmann msp@baylibre.com Signed-off-by: Guillaume Ranquet granquet@baylibre.com [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen rex-bc.chen@mediatek.com
There's no power_on()/power_off() callbacks and looks a bit weird, but it's also right... the only thing that's missing, IMO, is a comment in the actual file explaining that power for this PHY is always on when the DP block is on and that no PHY specific power sequence has to be carried on (being managed elsewhere and strongly tied to the specific DP IP).
Besides that,
Reviewed-by: AngeloGioacchino Del Regno < angelogioacchino.delregno@collabora.com>
Hello Angelo,
there is no power-on/off setting register for dp-phy because of the hardware design.
Therefore, we power-on/off using enable/disable power domain. You can see the function mtk_dp_suspend/mtk_dp_resume in mtk-dp.c "pm_runtime_get_sync/pm_runtime_put_sync".
When the power domain is disable, the phy is also diabled.
BRs, Bo-Chen
On 13-06-22, 15:26, Bo-Chen Chen wrote:
From: Markus Schneider-Pargmann msp@baylibre.com
This is a new driver that supports the integrated DisplayPort phy for mediatek SoCs, especially the mt8195. The phy is integrated into the DisplayPort controller and will be created by the mtk-dp driver. This driver expects a struct regmap to be able to work on the same registers as the DisplayPort controller. It sets the device data to be the struct phy so that the DisplayPort controller can easily work with it.
The driver does not have any devicetree bindings because the datasheet does not list the controller and the phy as distinct units.
The interaction with the controller can be covered by the configure callback of the phy framework and its displayport parameters.
Signed-off-by: Markus Schneider-Pargmann msp@baylibre.com Signed-off-by: Guillaume Ranquet granquet@baylibre.com [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen rex-bc.chen@mediatek.com
MAINTAINERS | 1 + drivers/phy/mediatek/Kconfig | 8 ++ drivers/phy/mediatek/Makefile | 1 + drivers/phy/mediatek/phy-mtk-dp.c | 202 ++++++++++++++++++++++++++++++ 4 files changed, 212 insertions(+) create mode 100644 drivers/phy/mediatek/phy-mtk-dp.c
diff --git a/MAINTAINERS b/MAINTAINERS index a6d3bd9d2a8d..f1460ee9ce83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6698,6 +6698,7 @@ L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Supported F: Documentation/devicetree/bindings/display/mediatek/ F: drivers/gpu/drm/mediatek/ +F: drivers/phy/mediatek/phy-mtk-dp.c F: drivers/phy/mediatek/phy-mtk-hdmi* F: drivers/phy/mediatek/phy-mtk-mipi*
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 55f8e6c048ab..d631525d12e1 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -55,3 +55,11 @@ config PHY_MTK_MIPI_DSI select GENERIC_PHY help Support MIPI DSI for Mediatek SoCs.
+config PHY_MTK_DP
- tristate "MediaTek DP-PHY Driver"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on OF
- select GENERIC_PHY
- help
Support DisplayPort PHY for MediaTek SoCs.diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile index ace660fbed3a..4ba1e0650434 100644 --- a/drivers/phy/mediatek/Makefile +++ b/drivers/phy/mediatek/Makefile @@ -3,6 +3,7 @@ # Makefile for the phy drivers. #
+obj-$(CONFIG_PHY_MTK_DP) += phy-mtk-dp.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c new file mode 100644 index 000000000000..c4d5ca1719a4 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-dp.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- MediaTek DisplayPort PHY driver
- Copyright (c) 2022 BayLibre
- Copyright (c) 2022 MediaTek
It should be proper name of companies (hint see other uses)
- */
+#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h>
+#define PHY_OFFSET 0x1000
+#define MTK_DP_PHY_DIG_PLL_CTL_1 (PHY_OFFSET + 0x14) +#define TPLL_SSC_EN BIT(3)
+#define MTK_DP_PHY_DIG_BIT_RATE (PHY_OFFSET + 0x3C) +#define BIT_RATE_RBR 0 +#define BIT_RATE_HBR 1 +#define BIT_RATE_HBR2 2 +#define BIT_RATE_HBR3 3
+#define MTK_DP_PHY_DIG_SW_RST (PHY_OFFSET + 0x38) +#define DP_GLB_SW_RST_PHYD BIT(0)
+#define MTK_DP_LANE0_DRIVING_PARAM_3 (PHY_OFFSET + 0x138) +#define MTK_DP_LANE1_DRIVING_PARAM_3 (PHY_OFFSET + 0x238) +#define MTK_DP_LANE2_DRIVING_PARAM_3 (PHY_OFFSET + 0x338) +#define MTK_DP_LANE3_DRIVING_PARAM_3 (PHY_OFFSET + 0x438) +#define XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT BIT(4) +#define XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT (BIT(10) | BIT(12)) +#define XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT GENMASK(20, 19) +#define XTP_LN_TX_LCTXC0_SW0_PRE3_DEFAULT GENMASK(29, 29) +#define DRIVING_PARAM_3_DEFAULT (XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT | \
XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT | \XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT | \XTP_LN_TX_LCTXC0_SW0_PRE3_DEFAULT)+#define XTP_LN_TX_LCTXC0_SW1_PRE0_DEFAULT GENMASK(4, 3) +#define XTP_LN_TX_LCTXC0_SW1_PRE1_DEFAULT GENMASK(12, 9) +#define XTP_LN_TX_LCTXC0_SW1_PRE2_DEFAULT (BIT(18) | BIT(21)) +#define XTP_LN_TX_LCTXC0_SW2_PRE0_DEFAULT GENMASK(29, 29) +#define DRIVING_PARAM_4_DEFAULT (XTP_LN_TX_LCTXC0_SW1_PRE0_DEFAULT | \
XTP_LN_TX_LCTXC0_SW1_PRE1_DEFAULT | \XTP_LN_TX_LCTXC0_SW1_PRE2_DEFAULT | \XTP_LN_TX_LCTXC0_SW2_PRE0_DEFAULT)+#define XTP_LN_TX_LCTXC0_SW2_PRE1_DEFAULT (BIT(3) | BIT(5)) +#define XTP_LN_TX_LCTXC0_SW3_PRE0_DEFAULT GENMASK(13, 12) +#define DRIVING_PARAM_5_DEFAULT (XTP_LN_TX_LCTXC0_SW2_PRE1_DEFAULT | \
XTP_LN_TX_LCTXC0_SW3_PRE0_DEFAULT)+#define XTP_LN_TX_LCTXCP1_SW0_PRE0_DEFAULT 0 +#define XTP_LN_TX_LCTXCP1_SW0_PRE1_DEFAULT GENMASK(10, 10) +#define XTP_LN_TX_LCTXCP1_SW0_PRE2_DEFAULT GENMASK(19, 19) +#define XTP_LN_TX_LCTXCP1_SW0_PRE3_DEFAULT GENMASK(28, 28) +#define DRIVING_PARAM_6_DEFAULT (XTP_LN_TX_LCTXCP1_SW0_PRE0_DEFAULT | \
XTP_LN_TX_LCTXCP1_SW0_PRE1_DEFAULT | \XTP_LN_TX_LCTXCP1_SW0_PRE2_DEFAULT | \XTP_LN_TX_LCTXCP1_SW0_PRE3_DEFAULT)+#define XTP_LN_TX_LCTXCP1_SW1_PRE0_DEFAULT 0 +#define XTP_LN_TX_LCTXCP1_SW1_PRE1_DEFAULT GENMASK(10, 9) +#define XTP_LN_TX_LCTXCP1_SW1_PRE2_DEFAULT GENMASK(19, 18) +#define XTP_LN_TX_LCTXCP1_SW2_PRE0_DEFAULT 0 +#define DRIVING_PARAM_7_DEFAULT (XTP_LN_TX_LCTXCP1_SW1_PRE0_DEFAULT | \
XTP_LN_TX_LCTXCP1_SW1_PRE1_DEFAULT | \XTP_LN_TX_LCTXCP1_SW1_PRE2_DEFAULT | \XTP_LN_TX_LCTXCP1_SW2_PRE0_DEFAULT)+#define XTP_LN_TX_LCTXCP1_SW2_PRE1_DEFAULT GENMASK(3, 3) +#define XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT 0 +#define DRIVING_PARAM_8_DEFAULT (XTP_LN_TX_LCTXCP1_SW2_PRE1_DEFAULT | \
XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT)+struct mtk_dp_phy {
- struct regmap *regs;
+};
+static int mtk_dp_phy_init(struct phy *phy) +{
- struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
- u32 driving_params[] = {
DRIVING_PARAM_3_DEFAULT,DRIVING_PARAM_4_DEFAULT,DRIVING_PARAM_5_DEFAULT,DRIVING_PARAM_6_DEFAULT,DRIVING_PARAM_7_DEFAULT,DRIVING_PARAM_8_DEFAULT- };
- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE0_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE1_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE2_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE3_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- return 0;
+}
+static int mtk_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) +{
- struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
- u32 val;
- if (opts->dp.set_rate) {
switch (opts->dp.link_rate) {default:dev_err(&phy->dev,"Implementation error, unknown linkrate %x\n",opts->dp.link_rate);return -EINVAL;case 1620:val = BIT_RATE_RBR;break;case 2700:val = BIT_RATE_HBR;break;case 5400:val = BIT_RATE_HBR2;break;case 8100:val = BIT_RATE_HBR3;break;}regmap_write(dp_phy->regs, MTK_DP_PHY_DIG_BIT_RATE, val);- }
- regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_PLL_CTL_1,
TPLL_SSC_EN, opts->dp.ssc ? TPLL_SSC_EN : 0);- return 0;
+}
+static int mtk_dp_phy_reset(struct phy *phy) +{
- struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
- regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_SW_RST,
DP_GLB_SW_RST_PHYD, 0);- usleep_range(50, 200);
- regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_SW_RST,
DP_GLB_SW_RST_PHYD, 1);- return 0;
+}
+static const struct phy_ops mtk_dp_phy_dev_ops = {
- .init = mtk_dp_phy_init,
- .configure = mtk_dp_phy_configure,
- .reset = mtk_dp_phy_reset,
- .owner = THIS_MODULE,
+};
+static int mtk_dp_phy_probe(struct platform_device *pdev) +{
- struct device *dev = &pdev->dev;
- struct mtk_dp_phy *dp_phy;
- struct phy *phy;
- struct regmap *regs;
- regs = *(struct regmap **)dev->platform_data;
why do you need this cast away from void?
- if (!regs)
return dev_err_probe(dev, EINVAL,"No data passed, requires struct regmap**\n");- dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL);
- if (!dp_phy)
return -ENOMEM;- dp_phy->regs = regs;
- phy = devm_phy_create(dev, NULL, &mtk_dp_phy_dev_ops);
- if (IS_ERR(phy))
return dev_err_probe(dev, PTR_ERR(phy),"Failed to create DP PHY\n");- phy_set_drvdata(phy, dp_phy);
- if (!dev->of_node)
phy_create_lookup(phy, "dp", dev_name(dev));- return 0;
+}
+struct platform_driver mtk_dp_phy_driver = {
- .probe = mtk_dp_phy_probe,
- .driver = {
.name = "mediatek-dp-phy",- },
+}; +module_platform_driver(mtk_dp_phy_driver);
+MODULE_AUTHOR("Markus Schneider-Pargmann msp@baylibre.com"); +MODULE_DESCRIPTION("MediaTek DP PHY Driver");
+MODULE_LICENSE("GPL");
2.18.0
On Thu, 2022-06-16 at 17:47 -0700, Vinod Koul wrote:
On 13-06-22, 15:26, Bo-Chen Chen wrote:
From: Markus Schneider-Pargmann msp@baylibre.com
This is a new driver that supports the integrated DisplayPort phy for mediatek SoCs, especially the mt8195. The phy is integrated into the DisplayPort controller and will be created by the mtk-dp driver. This driver expects a struct regmap to be able to work on the same registers as the DisplayPort controller. It sets the device data to be the struct phy so that the DisplayPort controller can easily work with it.
The driver does not have any devicetree bindings because the datasheet does not list the controller and the phy as distinct units.
The interaction with the controller can be covered by the configure callback of the phy framework and its displayport parameters.
Signed-off-by: Markus Schneider-Pargmann msp@baylibre.com Signed-off-by: Guillaume Ranquet granquet@baylibre.com [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen rex-bc.chen@mediatek.com
MAINTAINERS | 1 + drivers/phy/mediatek/Kconfig | 8 ++ drivers/phy/mediatek/Makefile | 1 + drivers/phy/mediatek/phy-mtk-dp.c | 202 ++++++++++++++++++++++++++++++ 4 files changed, 212 insertions(+) create mode 100644 drivers/phy/mediatek/phy-mtk-dp.c
diff --git a/MAINTAINERS b/MAINTAINERS index a6d3bd9d2a8d..f1460ee9ce83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6698,6 +6698,7 @@ L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Supported F: Documentation/devicetree/bindings/display/mediatek/ F: drivers/gpu/drm/mediatek/ +F: drivers/phy/mediatek/phy-mtk-dp.c F: drivers/phy/mediatek/phy-mtk-hdmi* F: drivers/phy/mediatek/phy-mtk-mipi*
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 55f8e6c048ab..d631525d12e1 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -55,3 +55,11 @@ config PHY_MTK_MIPI_DSI select GENERIC_PHY help Support MIPI DSI for Mediatek SoCs.
+config PHY_MTK_DP
- tristate "MediaTek DP-PHY Driver"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on OF
- select GENERIC_PHY
- help
Support DisplayPort PHY for MediaTek SoCs.diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile index ace660fbed3a..4ba1e0650434 100644 --- a/drivers/phy/mediatek/Makefile +++ b/drivers/phy/mediatek/Makefile @@ -3,6 +3,7 @@ # Makefile for the phy drivers. #
+obj-$(CONFIG_PHY_MTK_DP) += phy-mtk-dp.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c new file mode 100644 index 000000000000..c4d5ca1719a4 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-dp.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- MediaTek DisplayPort PHY driver
- Copyright (c) 2022 BayLibre
- Copyright (c) 2022 MediaTek
It should be proper name of companies (hint see other uses)
Hello Vinod,
Thanks for review. I will modify like this: /* * MediaTek DisplayPort PHY driver * * Copyright (c) 2022 BayLibre Inc. * Copyright (c) 2022 MediaTek Inc. */
- */
+#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h>
+#define PHY_OFFSET 0x1000
+#define MTK_DP_PHY_DIG_PLL_CTL_1 (PHY_OFFSET + 0x14) +#define TPLL_SSC_EN BIT(3)
+#define MTK_DP_PHY_DIG_BIT_RATE (PHY_OFFSET + 0x3C) +#define BIT_RATE_RBR 0 +#define BIT_RATE_HBR 1 +#define BIT_RATE_HBR2 2 +#define BIT_RATE_HBR3 3
+#define MTK_DP_PHY_DIG_SW_RST (PHY_OFFSET + 0x38) +#define DP_GLB_SW_RST_PHYD BIT(0)
+#define MTK_DP_LANE0_DRIVING_PARAM_3 (PHY_OFFSET + 0x138) +#define MTK_DP_LANE1_DRIVING_PARAM_3 (PHY_OFFSET + 0x238) +#define MTK_DP_LANE2_DRIVING_PARAM_3 (PHY_OFFSET + 0x338) +#define MTK_DP_LANE3_DRIVING_PARAM_3 (PHY_OFFSET + 0x438) +#define XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT BIT(4) +#define XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT (BIT(10) | BIT(12)) +#define XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT GENMASK(20, 19) +#define XTP_LN_TX_LCTXC0_SW0_PRE3_DEFAULT GENMASK(29, 29) +#define DRIVING_PARAM_3_DEFAULT (XTP_LN_TX_LCTXC0_SW0_PRE0_DEFA ULT | \
XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT | \XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT | \XTP_LN_TX_LCTXC0_SW0_PRE3_DEFAULT)+#define XTP_LN_TX_LCTXC0_SW1_PRE0_DEFAULT GENMASK(4, 3) +#define XTP_LN_TX_LCTXC0_SW1_PRE1_DEFAULT GENMASK(12, 9) +#define XTP_LN_TX_LCTXC0_SW1_PRE2_DEFAULT (BIT(18) | BIT(21)) +#define XTP_LN_TX_LCTXC0_SW2_PRE0_DEFAULT GENMASK(29, 29) +#define DRIVING_PARAM_4_DEFAULT (XTP_LN_TX_LCTXC0_SW1_PRE0_DEFA ULT | \
XTP_LN_TX_LCTXC0_SW1_PRE1_DEFAULT | \XTP_LN_TX_LCTXC0_SW1_PRE2_DEFAULT | \XTP_LN_TX_LCTXC0_SW2_PRE0_DEFAULT)+#define XTP_LN_TX_LCTXC0_SW2_PRE1_DEFAULT (BIT(3) | BIT(5)) +#define XTP_LN_TX_LCTXC0_SW3_PRE0_DEFAULT GENMASK(13, 12) +#define DRIVING_PARAM_5_DEFAULT (XTP_LN_TX_LCTXC0_SW2_PRE1_DEFA ULT | \
XTP_LN_TX_LCTXC0_SW3_PRE0_DEFAULT)+#define XTP_LN_TX_LCTXCP1_SW0_PRE0_DEFAULT 0 +#define XTP_LN_TX_LCTXCP1_SW0_PRE1_DEFAULT GENMASK(10, 10) +#define XTP_LN_TX_LCTXCP1_SW0_PRE2_DEFAULT GENMASK(19, 19) +#define XTP_LN_TX_LCTXCP1_SW0_PRE3_DEFAULT GENMASK(28, 28) +#define DRIVING_PARAM_6_DEFAULT (XTP_LN_TX_LCTXCP1_SW0_PRE0_DEF AULT | \
XTP_LN_TX_LCTXCP1_SW0_PRE1_DEFAULT | \XTP_LN_TX_LCTXCP1_SW0_PRE2_DEFAULT | \XTP_LN_TX_LCTXCP1_SW0_PRE3_DEFAULT)+#define XTP_LN_TX_LCTXCP1_SW1_PRE0_DEFAULT 0 +#define XTP_LN_TX_LCTXCP1_SW1_PRE1_DEFAULT GENMASK(10, 9) +#define XTP_LN_TX_LCTXCP1_SW1_PRE2_DEFAULT GENMASK(19, 18) +#define XTP_LN_TX_LCTXCP1_SW2_PRE0_DEFAULT 0 +#define DRIVING_PARAM_7_DEFAULT (XTP_LN_TX_LCTXCP1_SW1_PRE0_DEF AULT | \
XTP_LN_TX_LCTXCP1_SW1_PRE1_DEFAULT | \XTP_LN_TX_LCTXCP1_SW1_PRE2_DEFAULT | \XTP_LN_TX_LCTXCP1_SW2_PRE0_DEFAULT)+#define XTP_LN_TX_LCTXCP1_SW2_PRE1_DEFAULT GENMASK(3, 3) +#define XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT 0 +#define DRIVING_PARAM_8_DEFAULT (XTP_LN_TX_LCTXCP1_SW2_PRE1_DEF AULT | \
XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT)+struct mtk_dp_phy {
- struct regmap *regs;
+};
+static int mtk_dp_phy_init(struct phy *phy) +{
- struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
- u32 driving_params[] = {
DRIVING_PARAM_3_DEFAULT,DRIVING_PARAM_4_DEFAULT,DRIVING_PARAM_5_DEFAULT,DRIVING_PARAM_6_DEFAULT,DRIVING_PARAM_7_DEFAULT,DRIVING_PARAM_8_DEFAULT- };
- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE0_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE1_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE2_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- regmap_bulk_write(dp_phy->regs, MTK_DP_LANE3_DRIVING_PARAM_3,
driving_params, ARRAY_SIZE(driving_params));- return 0;
+}
+static int mtk_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) +{
- struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
- u32 val;
- if (opts->dp.set_rate) {
switch (opts->dp.link_rate) {default:dev_err(&phy->dev,"Implementation error, unknown linkrate%x\n",
opts->dp.link_rate);return -EINVAL;case 1620:val = BIT_RATE_RBR;break;case 2700:val = BIT_RATE_HBR;break;case 5400:val = BIT_RATE_HBR2;break;case 8100:val = BIT_RATE_HBR3;break;}regmap_write(dp_phy->regs, MTK_DP_PHY_DIG_BIT_RATE,val);
- }
- regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_PLL_CTL_1,
TPLL_SSC_EN, opts->dp.ssc ? TPLL_SSC_EN :0);
- return 0;
+}
+static int mtk_dp_phy_reset(struct phy *phy) +{
- struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
- regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_SW_RST,
DP_GLB_SW_RST_PHYD, 0);- usleep_range(50, 200);
- regmap_update_bits(dp_phy->regs, MTK_DP_PHY_DIG_SW_RST,
DP_GLB_SW_RST_PHYD, 1);- return 0;
+}
+static const struct phy_ops mtk_dp_phy_dev_ops = {
- .init = mtk_dp_phy_init,
- .configure = mtk_dp_phy_configure,
- .reset = mtk_dp_phy_reset,
- .owner = THIS_MODULE,
+};
+static int mtk_dp_phy_probe(struct platform_device *pdev) +{
- struct device *dev = &pdev->dev;
- struct mtk_dp_phy *dp_phy;
- struct phy *phy;
- struct regmap *regs;
- regs = *(struct regmap **)dev->platform_data;
why do you need this cast away from void?
When register platform data (in mtk_dp.c prober) we do this where "struct regmap *regs;":
mtk_dp->phy_dev = platform_device_register_data( dev, "mediatek-dp-phy", PLATFORM_DEVID_AUTO, &mtk_dp->regs, sizeof(struct regmap *));
refer to [1].
[1]: https://lore.kernel.org/all/20220610105522.13449-6-rex-bc.chen@mediatek.com/
BRs, Bo-Chen
- if (!regs)
return dev_err_probe(dev, EINVAL,"No data passed, requires structregmap**\n");
- dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL);
- if (!dp_phy)
return -ENOMEM;- dp_phy->regs = regs;
- phy = devm_phy_create(dev, NULL, &mtk_dp_phy_dev_ops);
- if (IS_ERR(phy))
return dev_err_probe(dev, PTR_ERR(phy),"Failed to create DP PHY\n");- phy_set_drvdata(phy, dp_phy);
- if (!dev->of_node)
phy_create_lookup(phy, "dp", dev_name(dev));- return 0;
+}
+struct platform_driver mtk_dp_phy_driver = {
- .probe = mtk_dp_phy_probe,
- .driver = {
.name = "mediatek-dp-phy",- },
+}; +module_platform_driver(mtk_dp_phy_driver);
+MODULE_AUTHOR("Markus Schneider-Pargmann msp@baylibre.com"); +MODULE_DESCRIPTION("MediaTek DP PHY Driver");
+MODULE_LICENSE("GPL");
2.18.0
dri-devel@lists.freedesktop.org
-
AngeloGioacchino Del Regno -
Bo-Chen Chen -
Rex-BC Chen
-
Vinod Koul