In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken. Specifically the interconnect needs to be on for more than just the DPU driver's AXI bus. In the very least it also needs to be on for the DSI driver's AXI bus. This can be seen fairly easily by doing this on a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10 sleep 10 cd /sys/bus/platform/devices/ae94000.dsi/power echo on > control
When you do that, you'll get a warning splat in the logs about "gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and that it can't happen naturally in the system because in normal system usage the DPU is pretty much always on when DSI is on. That being said: * In official ChromeOS builds (admittedly a 5.4 kernel with backports) we have seen that splat at bootup. * Even though we don't use "autosuspend" for these components, we don't use the "put_sync" variants. Thus plausibly the DSI could stay "runtime enabled" past when the DPU is enabled. Techncially we shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the interconnect happens in the mdss driver again. That means that all of the children can assume that the interconnect is on at the minimum bandwidth. We'll then let the DPU request the higher amount that it wants.
It should be noted that this isn't as hacky of a solution as it might initially appear. Specifically: * Since MDSS and DPU individually get their own references to the interconnect then the framework will actually handle aggregating them. The two drivers are _not_ clobbering each other. * When the Qualcomm interconnect driver aggregates it takes the max of all the peaks. Thus having MDSS request a peak, as we're doing here, won't actually change the total interconnect bandwidth (it won't be added to the request for the DPU). This perhaps explains why the "average" requested in MDSS was historically 0 since that one _would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're also seeing some RPMH hangs that are addressed by this fix. These hangs are showing up in the field and on _some_ devices with enough stress testing of suspend/resume. Specifically right at suspend time with a stack crawl that looks like this (from chromeos-5.15 tree): rpmh_write_batch+0x19c/0x240 qcom_icc_bcm_voter_commit+0x210/0x420 qcom_icc_set+0x28/0x38 apply_constraints+0x70/0xa4 icc_set_bw+0x150/0x24c dpu_runtime_resume+0x50/0x1c4 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x12c/0x20c __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x370/0x4a0 __pm_runtime_resume+0x80/0xb0 dpu_kms_enable_commit+0x24/0x30 msm_atomic_commit_tail+0x12c/0x630 commit_tail+0xac/0x150 drm_atomic_helper_commit+0x114/0x11c drm_atomic_commit+0x68/0x78 drm_atomic_helper_disable_all+0x158/0x1c8 drm_atomic_helper_suspend+0xc0/0x1c0 drm_mode_config_helper_suspend+0x2c/0x60 msm_pm_prepare+0x2c/0x40 pm_generic_prepare+0x30/0x44 genpd_prepare+0x80/0xd0 device_prepare+0x78/0x17c dpm_prepare+0xb0/0x384 dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the hang seemed to come and go with random factors. It's not terribly surprising that the hang is gone after this patch since the line of code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Douglas Anderson dianders@chromium.org ---
Changes in v2: - Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */ - static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
@@ -1303,15 +1301,9 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct dpu_kms *dpu_kms = to_dpu_kms(priv->kms); struct drm_encoder *encoder; struct drm_device *ddev; - int i;
ddev = dpu_kms->dev;
- WARN_ON(!(dpu_kms->num_paths)); - /* Min vote of BW is required before turning on AXI clk */ - for (i = 0; i < dpu_kms->num_paths; i++) - icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW)); - rc = clk_bulk_prepare_enable(dpu_kms->num_clocks, dpu_kms->clocks); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc); diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */ + struct msm_mdss { struct device *dev;
@@ -36,8 +39,47 @@ struct msm_mdss { unsigned long enabled_mask; struct irq_domain *domain; } irq_controller; + struct icc_path *path[2]; + u32 num_paths; };
+static int msm_mdss_parse_data_bus_icc_path(struct device *dev, + struct msm_mdss *msm_mdss) +{ + struct icc_path *path0 = of_icc_get(dev, "mdp0-mem"); + struct icc_path *path1 = of_icc_get(dev, "mdp1-mem"); + + if (IS_ERR_OR_NULL(path0)) + return PTR_ERR_OR_ZERO(path0); + + msm_mdss->path[0] = path0; + msm_mdss->num_paths = 1; + + if (!IS_ERR_OR_NULL(path1)) { + msm_mdss->path[1] = path1; + msm_mdss->num_paths++; + } + + return 0; +} + +static void msm_mdss_put_icc_path(void *data) +{ + struct msm_mdss *msm_mdss = data; + int i; + + for (i = 0; i < msm_mdss->num_paths; i++) + icc_put(msm_mdss->path[i]); +} + +static void msm_mdss_icc_request_bw(struct msm_mdss *msm_mdss, unsigned long bw) +{ + int i; + + for (i = 0; i < msm_mdss->num_paths; i++) + icc_set_bw(msm_mdss->path[i], 0, Bps_to_icc(bw)); +} + static void msm_mdss_irq(struct irq_desc *desc) { struct msm_mdss *msm_mdss = irq_desc_get_handler_data(desc); @@ -136,6 +178,13 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) { int ret;
+ /* + * Several components have AXI clocks that can only be turned on if + * the interconnect is enabled (non-zero bandwidth). Let's make sure + * that the interconnects are at least at a minimum amount. + */ + msm_mdss_icc_request_bw(msm_mdss, MIN_IB_BW); + ret = clk_bulk_prepare_enable(msm_mdss->num_clocks, msm_mdss->clocks); if (ret) { dev_err(msm_mdss->dev, "clock enable failed, ret:%d\n", ret); @@ -178,6 +227,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) static int msm_mdss_disable(struct msm_mdss *msm_mdss) { clk_bulk_disable_unprepare(msm_mdss->num_clocks, msm_mdss->clocks); + msm_mdss_icc_request_bw(msm_mdss, 0);
return 0; } @@ -271,6 +321,13 @@ static struct msm_mdss *msm_mdss_init(struct platform_device *pdev, bool is_mdp5
dev_dbg(&pdev->dev, "mapped mdss address space @%pK\n", msm_mdss->mmio);
+ ret = msm_mdss_parse_data_bus_icc_path(&pdev->dev, msm_mdss); + if (ret) + return ERR_PTR(ret); + ret = devm_add_action_or_reset(&pdev->dev, msm_mdss_put_icc_path, msm_mdss); + if (ret) + return ERR_PTR(ret); + if (is_mdp5) ret = mdp5_mdss_parse_clock(pdev, &msm_mdss->clocks); else
Hi Doug
On 5/31/2022 4:01 PM, Douglas Anderson wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken. Specifically the interconnect needs to be on for more than just the DPU driver's AXI bus. In the very least it also needs to be on for the DSI driver's AXI bus. This can be seen fairly easily by doing this on a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10 sleep 10 cd /sys/bus/platform/devices/ae94000.dsi/power echo on > control
When you do that, you'll get a warning splat in the logs about "gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and that it can't happen naturally in the system because in normal system usage the DPU is pretty much always on when DSI is on. That being said:
- In official ChromeOS builds (admittedly a 5.4 kernel with backports) we have seen that splat at bootup.
- Even though we don't use "autosuspend" for these components, we don't use the "put_sync" variants. Thus plausibly the DSI could stay "runtime enabled" past when the DPU is enabled. Techncially we shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the interconnect happens in the mdss driver again. That means that all of the children can assume that the interconnect is on at the minimum bandwidth. We'll then let the DPU request the higher amount that it wants.
It should be noted that this isn't as hacky of a solution as it might initially appear. Specifically:
- Since MDSS and DPU individually get their own references to the interconnect then the framework will actually handle aggregating them. The two drivers are _not_ clobbering each other.
- When the Qualcomm interconnect driver aggregates it takes the max of all the peaks. Thus having MDSS request a peak, as we're doing here, won't actually change the total interconnect bandwidth (it won't be added to the request for the DPU). This perhaps explains why the "average" requested in MDSS was historically 0 since that one _would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're also seeing some RPMH hangs that are addressed by this fix. These hangs are showing up in the field and on _some_ devices with enough stress testing of suspend/resume. Specifically right at suspend time with a stack crawl that looks like this (from chromeos-5.15 tree): rpmh_write_batch+0x19c/0x240 qcom_icc_bcm_voter_commit+0x210/0x420 qcom_icc_set+0x28/0x38 apply_constraints+0x70/0xa4 icc_set_bw+0x150/0x24c dpu_runtime_resume+0x50/0x1c4 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x12c/0x20c __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x370/0x4a0 __pm_runtime_resume+0x80/0xb0 dpu_kms_enable_commit+0x24/0x30 msm_atomic_commit_tail+0x12c/0x630 commit_tail+0xac/0x150 drm_atomic_helper_commit+0x114/0x11c drm_atomic_commit+0x68/0x78 drm_atomic_helper_disable_all+0x158/0x1c8 drm_atomic_helper_suspend+0xc0/0x1c0 drm_mode_config_helper_suspend+0x2c/0x60 msm_pm_prepare+0x2c/0x40 pm_generic_prepare+0x30/0x44 genpd_prepare+0x80/0xd0 device_prepare+0x78/0x17c dpm_prepare+0xb0/0x384 dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the hang seemed to come and go with random factors. It's not terribly surprising that the hang is gone after this patch since the line of code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Douglas Anderson dianders@chromium.org
Reviewed-by: Abhinav Kumar quic_abhinavk@quicinc.com
We will test this out even on RB3/RB5 to make sure it boots up fine and give Tested-by.
Thanks
Abhinav
Changes in v2:
Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
- static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
@@ -1303,15 +1301,9 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct dpu_kms *dpu_kms = to_dpu_kms(priv->kms); struct drm_encoder *encoder; struct drm_device *ddev;
int i;
ddev = dpu_kms->dev;
WARN_ON(!(dpu_kms->num_paths));
/* Min vote of BW is required before turning on AXI clk */
for (i = 0; i < dpu_kms->num_paths; i++)
icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));rc = clk_bulk_prepare_enable(dpu_kms->num_clocks, dpu_kms->clocks); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
- struct msm_mdss { struct device *dev;
@@ -36,8 +39,47 @@ struct msm_mdss { unsigned long enabled_mask; struct irq_domain *domain; } irq_controller;
- struct icc_path *path[2];
- u32 num_paths; };
+static int msm_mdss_parse_data_bus_icc_path(struct device *dev,
struct msm_mdss *msm_mdss)+{
- struct icc_path *path0 = of_icc_get(dev, "mdp0-mem");
- struct icc_path *path1 = of_icc_get(dev, "mdp1-mem");
- if (IS_ERR_OR_NULL(path0))
return PTR_ERR_OR_ZERO(path0);- msm_mdss->path[0] = path0;
- msm_mdss->num_paths = 1;
- if (!IS_ERR_OR_NULL(path1)) {
msm_mdss->path[1] = path1;msm_mdss->num_paths++;- }
- return 0;
+}
+static void msm_mdss_put_icc_path(void *data) +{
- struct msm_mdss *msm_mdss = data;
- int i;
- for (i = 0; i < msm_mdss->num_paths; i++)
icc_put(msm_mdss->path[i]);+}
+static void msm_mdss_icc_request_bw(struct msm_mdss *msm_mdss, unsigned long bw) +{
- int i;
- for (i = 0; i < msm_mdss->num_paths; i++)
icc_set_bw(msm_mdss->path[i], 0, Bps_to_icc(bw));+}
- static void msm_mdss_irq(struct irq_desc *desc) { struct msm_mdss *msm_mdss = irq_desc_get_handler_data(desc);
@@ -136,6 +178,13 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) { int ret;
- /*
* Several components have AXI clocks that can only be turned on if* the interconnect is enabled (non-zero bandwidth). Let's make sure* that the interconnects are at least at a minimum amount.*/- msm_mdss_icc_request_bw(msm_mdss, MIN_IB_BW);
- ret = clk_bulk_prepare_enable(msm_mdss->num_clocks, msm_mdss->clocks); if (ret) { dev_err(msm_mdss->dev, "clock enable failed, ret:%d\n", ret);
@@ -178,6 +227,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) static int msm_mdss_disable(struct msm_mdss *msm_mdss) { clk_bulk_disable_unprepare(msm_mdss->num_clocks, msm_mdss->clocks);
msm_mdss_icc_request_bw(msm_mdss, 0);
return 0; }
@@ -271,6 +321,13 @@ static struct msm_mdss *msm_mdss_init(struct platform_device *pdev, bool is_mdp5
dev_dbg(&pdev->dev, "mapped mdss address space @%pK\n", msm_mdss->mmio);
- ret = msm_mdss_parse_data_bus_icc_path(&pdev->dev, msm_mdss);
- if (ret)
return ERR_PTR(ret);- ret = devm_add_action_or_reset(&pdev->dev, msm_mdss_put_icc_path, msm_mdss);
- if (ret)
return ERR_PTR(ret);- if (is_mdp5) ret = mdp5_mdss_parse_clock(pdev, &msm_mdss->clocks); else
On 5/31/2022 4:01 PM, Douglas Anderson wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken. Specifically the interconnect needs to be on for more than just the DPU driver's AXI bus. In the very least it also needs to be on for the DSI driver's AXI bus. This can be seen fairly easily by doing this on a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10 sleep 10 cd /sys/bus/platform/devices/ae94000.dsi/power echo on > control
When you do that, you'll get a warning splat in the logs about "gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and that it can't happen naturally in the system because in normal system usage the DPU is pretty much always on when DSI is on. That being said:
- In official ChromeOS builds (admittedly a 5.4 kernel with backports) we have seen that splat at bootup.
- Even though we don't use "autosuspend" for these components, we don't use the "put_sync" variants. Thus plausibly the DSI could stay "runtime enabled" past when the DPU is enabled. Techncially we shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the interconnect happens in the mdss driver again. That means that all of the children can assume that the interconnect is on at the minimum bandwidth. We'll then let the DPU request the higher amount that it wants.
It should be noted that this isn't as hacky of a solution as it might initially appear. Specifically:
- Since MDSS and DPU individually get their own references to the interconnect then the framework will actually handle aggregating them. The two drivers are _not_ clobbering each other.
- When the Qualcomm interconnect driver aggregates it takes the max of all the peaks. Thus having MDSS request a peak, as we're doing here, won't actually change the total interconnect bandwidth (it won't be added to the request for the DPU). This perhaps explains why the "average" requested in MDSS was historically 0 since that one _would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're also seeing some RPMH hangs that are addressed by this fix. These hangs are showing up in the field and on _some_ devices with enough stress testing of suspend/resume. Specifically right at suspend time with a stack crawl that looks like this (from chromeos-5.15 tree): rpmh_write_batch+0x19c/0x240 qcom_icc_bcm_voter_commit+0x210/0x420 qcom_icc_set+0x28/0x38 apply_constraints+0x70/0xa4 icc_set_bw+0x150/0x24c dpu_runtime_resume+0x50/0x1c4 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x12c/0x20c __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x370/0x4a0 __pm_runtime_resume+0x80/0xb0 dpu_kms_enable_commit+0x24/0x30 msm_atomic_commit_tail+0x12c/0x630 commit_tail+0xac/0x150 drm_atomic_helper_commit+0x114/0x11c drm_atomic_commit+0x68/0x78 drm_atomic_helper_disable_all+0x158/0x1c8 drm_atomic_helper_suspend+0xc0/0x1c0 drm_mode_config_helper_suspend+0x2c/0x60 msm_pm_prepare+0x2c/0x40 pm_generic_prepare+0x30/0x44 genpd_prepare+0x80/0xd0 device_prepare+0x78/0x17c dpm_prepare+0xb0/0x384 dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the hang seemed to come and go with random factors. It's not terribly surprising that the hang is gone after this patch since the line of code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Douglas Anderson dianders@chromium.org
Tested-by: Jessica Zhang quic_jesszhan@quicinc.com # RB3 (sdm845) and RB5 (qrb5165)
Changes in v2:
Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
- static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
@@ -1303,15 +1301,9 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct dpu_kms *dpu_kms = to_dpu_kms(priv->kms); struct drm_encoder *encoder; struct drm_device *ddev;
int i;
ddev = dpu_kms->dev;
WARN_ON(!(dpu_kms->num_paths));
/* Min vote of BW is required before turning on AXI clk */
for (i = 0; i < dpu_kms->num_paths; i++)
icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));rc = clk_bulk_prepare_enable(dpu_kms->num_clocks, dpu_kms->clocks); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
- struct msm_mdss { struct device *dev;
@@ -36,8 +39,47 @@ struct msm_mdss { unsigned long enabled_mask; struct irq_domain *domain; } irq_controller;
- struct icc_path *path[2];
- u32 num_paths; };
+static int msm_mdss_parse_data_bus_icc_path(struct device *dev,
struct msm_mdss *msm_mdss)+{
- struct icc_path *path0 = of_icc_get(dev, "mdp0-mem");
- struct icc_path *path1 = of_icc_get(dev, "mdp1-mem");
- if (IS_ERR_OR_NULL(path0))
return PTR_ERR_OR_ZERO(path0);- msm_mdss->path[0] = path0;
- msm_mdss->num_paths = 1;
- if (!IS_ERR_OR_NULL(path1)) {
msm_mdss->path[1] = path1;msm_mdss->num_paths++;- }
- return 0;
+}
+static void msm_mdss_put_icc_path(void *data) +{
- struct msm_mdss *msm_mdss = data;
- int i;
- for (i = 0; i < msm_mdss->num_paths; i++)
icc_put(msm_mdss->path[i]);+}
+static void msm_mdss_icc_request_bw(struct msm_mdss *msm_mdss, unsigned long bw) +{
- int i;
- for (i = 0; i < msm_mdss->num_paths; i++)
icc_set_bw(msm_mdss->path[i], 0, Bps_to_icc(bw));+}
- static void msm_mdss_irq(struct irq_desc *desc) { struct msm_mdss *msm_mdss = irq_desc_get_handler_data(desc);
@@ -136,6 +178,13 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) { int ret;
- /*
* Several components have AXI clocks that can only be turned on if* the interconnect is enabled (non-zero bandwidth). Let's make sure* that the interconnects are at least at a minimum amount.*/- msm_mdss_icc_request_bw(msm_mdss, MIN_IB_BW);
- ret = clk_bulk_prepare_enable(msm_mdss->num_clocks, msm_mdss->clocks); if (ret) { dev_err(msm_mdss->dev, "clock enable failed, ret:%d\n", ret);
@@ -178,6 +227,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) static int msm_mdss_disable(struct msm_mdss *msm_mdss) { clk_bulk_disable_unprepare(msm_mdss->num_clocks, msm_mdss->clocks);
msm_mdss_icc_request_bw(msm_mdss, 0);
return 0; }
@@ -271,6 +321,13 @@ static struct msm_mdss *msm_mdss_init(struct platform_device *pdev, bool is_mdp5
dev_dbg(&pdev->dev, "mapped mdss address space @%pK\n", msm_mdss->mmio);
- ret = msm_mdss_parse_data_bus_icc_path(&pdev->dev, msm_mdss);
- if (ret)
return ERR_PTR(ret);- ret = devm_add_action_or_reset(&pdev->dev, msm_mdss_put_icc_path, msm_mdss);
- if (ret)
return ERR_PTR(ret);- if (is_mdp5) ret = mdp5_mdss_parse_clock(pdev, &msm_mdss->clocks); else
-- 2.36.1.255.ge46751e96f-goog
Quoting Douglas Anderson (2022-05-31 16:01:26)
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken. Specifically the interconnect needs to be on for more than just the DPU driver's AXI bus. In the very least it also needs to be on for the DSI driver's AXI bus. This can be seen fairly easily by doing this on a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10 sleep 10 cd /sys/bus/platform/devices/ae94000.dsi/power echo on > control
When you do that, you'll get a warning splat in the logs about "gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and that it can't happen naturally in the system because in normal system usage the DPU is pretty much always on when DSI is on. That being said:
- In official ChromeOS builds (admittedly a 5.4 kernel with backports) we have seen that splat at bootup.
- Even though we don't use "autosuspend" for these components, we don't use the "put_sync" variants. Thus plausibly the DSI could stay "runtime enabled" past when the DPU is enabled. Techncially we shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the interconnect happens in the mdss driver again. That means that all of the children can assume that the interconnect is on at the minimum bandwidth. We'll then let the DPU request the higher amount that it wants.
It should be noted that this isn't as hacky of a solution as it might initially appear. Specifically:
- Since MDSS and DPU individually get their own references to the interconnect then the framework will actually handle aggregating them. The two drivers are _not_ clobbering each other.
- When the Qualcomm interconnect driver aggregates it takes the max of all the peaks. Thus having MDSS request a peak, as we're doing here, won't actually change the total interconnect bandwidth (it won't be added to the request for the DPU). This perhaps explains why the "average" requested in MDSS was historically 0 since that one _would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're also seeing some RPMH hangs that are addressed by this fix. These hangs are showing up in the field and on _some_ devices with enough stress testing of suspend/resume. Specifically right at suspend time with a stack crawl that looks like this (from chromeos-5.15 tree): rpmh_write_batch+0x19c/0x240 qcom_icc_bcm_voter_commit+0x210/0x420 qcom_icc_set+0x28/0x38 apply_constraints+0x70/0xa4 icc_set_bw+0x150/0x24c dpu_runtime_resume+0x50/0x1c4 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x12c/0x20c __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x370/0x4a0 __pm_runtime_resume+0x80/0xb0 dpu_kms_enable_commit+0x24/0x30 msm_atomic_commit_tail+0x12c/0x630 commit_tail+0xac/0x150 drm_atomic_helper_commit+0x114/0x11c drm_atomic_commit+0x68/0x78 drm_atomic_helper_disable_all+0x158/0x1c8 drm_atomic_helper_suspend+0xc0/0x1c0 drm_mode_config_helper_suspend+0x2c/0x60 msm_pm_prepare+0x2c/0x40 pm_generic_prepare+0x30/0x44 genpd_prepare+0x80/0xd0 device_prepare+0x78/0x17c dpm_prepare+0xb0/0x384 dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the hang seemed to come and go with random factors. It's not terribly surprising that the hang is gone after this patch since the line of code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Douglas Anderson dianders@chromium.org
Reviewed-by: Stephen Boyd swboyd@chromium.org
On Wed, 1 Jun 2022 at 02:01, Douglas Anderson dianders@chromium.org wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
[skipped the description]
Changes in v2:
- Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
[skipped]
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
As msm_mdss is now used for both DPU and MDP5 devices, could you please confirm that this value is valid for older devices too? E.g. db410c or 8974
struct msm_mdss { struct device *dev;
On 6/1/2022 3:04 AM, Dmitry Baryshkov wrote:
On Wed, 1 Jun 2022 at 02:01, Douglas Anderson dianders@chromium.org wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
[skipped the description]
Changes in v2:
Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
- static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
[skipped]
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
As msm_mdss is now used for both DPU and MDP5 devices, could you please confirm that this value is valid for older devices too? E.g. db410c or 8974
I need to check with Kalyan on this value (400MB) as I am unable to find documentation on this. Will update this thread when I do.
So prior to this change 627dc55c273da ("drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume"), this value was coming from the hw catalog
@@ -1191,10 +1193,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
ddev = dpu_kms->dev;
+ WARN_ON(!(dpu_kms->num_paths)); /* Min vote of BW is required before turning on AXI clk */ for (i = 0; i < dpu_kms->num_paths; i++) - icc_set_bw(dpu_kms->path[i], 0, - dpu_kms->catalog->perf.min_dram_ib); + icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));
After this, we moved to a hard-coded value, I am not sure why.
So nothing wrong with this change as such, the only question is whether this value is correct for older chips.
But the question here is, are older chips even using icc.
It seems like only sc7180, RB3/RB5 are unless i am mistaken.
So is there really any impact to the older chips with this change.
If not, we should probably let this one go ahead and move back to catalog based approach while extending ICC for older chips.
Thanks
Abhinav
- struct msm_mdss { struct device *dev;
On Wed, 1 Jun 2022 at 20:18, Abhinav Kumar quic_abhinavk@quicinc.com wrote:
On 6/1/2022 3:04 AM, Dmitry Baryshkov wrote:
On Wed, 1 Jun 2022 at 02:01, Douglas Anderson dianders@chromium.org wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
[skipped the description]
Changes in v2:
Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
- static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
[skipped]
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
As msm_mdss is now used for both DPU and MDP5 devices, could you please confirm that this value is valid for older devices too? E.g. db410c or 8974
I need to check with Kalyan on this value (400MB) as I am unable to find documentation on this. Will update this thread when I do.
So prior to this change 627dc55c273da ("drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume"), this value was coming from the hw catalog
@@ -1191,10 +1193,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
ddev = dpu_kms->dev;
WARN_ON(!(dpu_kms->num_paths)); /* Min vote of BW is required before turning on AXI clk */ for (i = 0; i < dpu_kms->num_paths; i++)
icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);
icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));After this, we moved to a hard-coded value, I am not sure why.
So nothing wrong with this change as such, the only question is whether this value is correct for older chips.
But the question here is, are older chips even using icc.
It seems like only sc7180, RB3/RB5 are unless i am mistaken.
We are not using it for msm8916 (but we should most probably). And for the msm8996 the icc patches were by Yassine.
So is there really any impact to the older chips with this change.
If not, we should probably let this one go ahead and move back to catalog based approach while extending ICC for older chips.
Let's get this sorted out. I'm fine with 400 MBps, if that works for all chipsets.
On 6/1/2022 12:58 PM, Dmitry Baryshkov wrote:
On Wed, 1 Jun 2022 at 20:18, Abhinav Kumar quic_abhinavk@quicinc.com wrote:
On 6/1/2022 3:04 AM, Dmitry Baryshkov wrote:
On Wed, 1 Jun 2022 at 02:01, Douglas Anderson dianders@chromium.org wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
[skipped the description]
Changes in v2:
Don't set bandwidth in init.
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
- static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
[skipped]
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
As msm_mdss is now used for both DPU and MDP5 devices, could you please confirm that this value is valid for older devices too? E.g. db410c or 8974
I need to check with Kalyan on this value (400MB) as I am unable to find documentation on this. Will update this thread when I do.
So prior to this change 627dc55c273da ("drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume"), this value was coming from the hw catalog
@@ -1191,10 +1193,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
ddev = dpu_kms->dev;
WARN_ON(!(dpu_kms->num_paths)); /* Min vote of BW is required before turning on AXI clk */ for (i = 0; i < dpu_kms->num_paths; i++)
icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);
icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));After this, we moved to a hard-coded value, I am not sure why.
So nothing wrong with this change as such, the only question is whether this value is correct for older chips.
But the question here is, are older chips even using icc.
It seems like only sc7180, RB3/RB5 are unless i am mistaken.
We are not using it for msm8916 (but we should most probably). And for the msm8996 the icc patches were by Yassine.
So is there really any impact to the older chips with this change.
If not, we should probably let this one go ahead and move back to catalog based approach while extending ICC for older chips.
Let's get this sorted out. I'm fine with 400 MBps, if that works for all chipsets.
I confirm that 400MBps min vote will work for all chipsets based on the discussion i had with my team.
Here, the additional thing to note as per discussion with doug on IRC is
now two ICC paths get created, one from mdp5's probe and the other from msm_mdss_init().
So the ICC driver will aggregate the votes and take the max for the second parameter ( IB ).
So for normal use-cases this will still work fine.
Thanks
Abhinav
On 01/06/2022 02:01, Douglas Anderson wrote:
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken. Specifically the interconnect needs to be on for more than just the DPU driver's AXI bus. In the very least it also needs to be on for the DSI driver's AXI bus. This can be seen fairly easily by doing this on a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10 sleep 10 cd /sys/bus/platform/devices/ae94000.dsi/power echo on > control
When you do that, you'll get a warning splat in the logs about "gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and that it can't happen naturally in the system because in normal system usage the DPU is pretty much always on when DSI is on. That being said:
- In official ChromeOS builds (admittedly a 5.4 kernel with backports) we have seen that splat at bootup.
- Even though we don't use "autosuspend" for these components, we don't use the "put_sync" variants. Thus plausibly the DSI could stay "runtime enabled" past when the DPU is enabled. Techncially we shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the interconnect happens in the mdss driver again. That means that all of the children can assume that the interconnect is on at the minimum bandwidth. We'll then let the DPU request the higher amount that it wants.
It should be noted that this isn't as hacky of a solution as it might initially appear. Specifically:
- Since MDSS and DPU individually get their own references to the interconnect then the framework will actually handle aggregating them. The two drivers are _not_ clobbering each other.
- When the Qualcomm interconnect driver aggregates it takes the max of all the peaks. Thus having MDSS request a peak, as we're doing here, won't actually change the total interconnect bandwidth (it won't be added to the request for the DPU). This perhaps explains why the "average" requested in MDSS was historically 0 since that one _would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're also seeing some RPMH hangs that are addressed by this fix. These hangs are showing up in the field and on _some_ devices with enough stress testing of suspend/resume. Specifically right at suspend time with a stack crawl that looks like this (from chromeos-5.15 tree): rpmh_write_batch+0x19c/0x240 qcom_icc_bcm_voter_commit+0x210/0x420 qcom_icc_set+0x28/0x38 apply_constraints+0x70/0xa4 icc_set_bw+0x150/0x24c dpu_runtime_resume+0x50/0x1c4 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x12c/0x20c __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x370/0x4a0 __pm_runtime_resume+0x80/0xb0 dpu_kms_enable_commit+0x24/0x30 msm_atomic_commit_tail+0x12c/0x630 commit_tail+0xac/0x150 drm_atomic_helper_commit+0x114/0x11c drm_atomic_commit+0x68/0x78 drm_atomic_helper_disable_all+0x158/0x1c8 drm_atomic_helper_suspend+0xc0/0x1c0 drm_mode_config_helper_suspend+0x2c/0x60 msm_pm_prepare+0x2c/0x40 pm_generic_prepare+0x30/0x44 genpd_prepare+0x80/0xd0 device_prepare+0x78/0x17c dpm_prepare+0xb0/0x384 dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the hang seemed to come and go with random factors. It's not terribly surprising that the hang is gone after this patch since the line of code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Douglas Anderson dianders@chromium.org
Changes in v2:
- Don't set bandwidth in init.
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ---- drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 2b9d931474e0..3025184053e0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -49,8 +49,6 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
- static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
@@ -1303,15 +1301,9 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct dpu_kms *dpu_kms = to_dpu_kms(priv->kms); struct drm_encoder *encoder; struct drm_device *ddev;
int i;
ddev = dpu_kms->dev;
WARN_ON(!(dpu_kms->num_paths));
/* Min vote of BW is required before turning on AXI clk */
for (i = 0; i < dpu_kms->num_paths; i++)
icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));rc = clk_bulk_prepare_enable(dpu_kms->num_clocks, dpu_kms->clocks); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 0454a571adf7..e13c5c12b775 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -5,6 +5,7 @@
#include <linux/clk.h> #include <linux/delay.h> +#include <linux/interconnect.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqdesc.h> @@ -25,6 +26,8 @@ #define UBWC_CTRL_2 0x150 #define UBWC_PREDICTION_MODE 0x154
+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */
- struct msm_mdss { struct device *dev;
@@ -36,8 +39,47 @@ struct msm_mdss { unsigned long enabled_mask; struct irq_domain *domain; } irq_controller;
- struct icc_path *path[2];
- u32 num_paths; };
+static int msm_mdss_parse_data_bus_icc_path(struct device *dev,
struct msm_mdss *msm_mdss)+{
- struct icc_path *path0 = of_icc_get(dev, "mdp0-mem");
- struct icc_path *path1 = of_icc_get(dev, "mdp1-mem");
- if (IS_ERR_OR_NULL(path0))
return PTR_ERR_OR_ZERO(path0);- msm_mdss->path[0] = path0;
- msm_mdss->num_paths = 1;
- if (!IS_ERR_OR_NULL(path1)) {
msm_mdss->path[1] = path1;msm_mdss->num_paths++;- }
- return 0;
+}
+static void msm_mdss_put_icc_path(void *data) +{
- struct msm_mdss *msm_mdss = data;
- int i;
- for (i = 0; i < msm_mdss->num_paths; i++)
icc_put(msm_mdss->path[i]);+}
+static void msm_mdss_icc_request_bw(struct msm_mdss *msm_mdss, unsigned long bw) +{
- int i;
- for (i = 0; i < msm_mdss->num_paths; i++)
icc_set_bw(msm_mdss->path[i], 0, Bps_to_icc(bw));+}
- static void msm_mdss_irq(struct irq_desc *desc) { struct msm_mdss *msm_mdss = irq_desc_get_handler_data(desc);
@@ -136,6 +178,13 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) { int ret;
- /*
* Several components have AXI clocks that can only be turned on if* the interconnect is enabled (non-zero bandwidth). Let's make sure* that the interconnects are at least at a minimum amount.*/- msm_mdss_icc_request_bw(msm_mdss, MIN_IB_BW);
- ret = clk_bulk_prepare_enable(msm_mdss->num_clocks, msm_mdss->clocks); if (ret) { dev_err(msm_mdss->dev, "clock enable failed, ret:%d\n", ret);
@@ -178,6 +227,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) static int msm_mdss_disable(struct msm_mdss *msm_mdss) { clk_bulk_disable_unprepare(msm_mdss->num_clocks, msm_mdss->clocks);
msm_mdss_icc_request_bw(msm_mdss, 0);
return 0; }
@@ -271,6 +321,13 @@ static struct msm_mdss *msm_mdss_init(struct platform_device *pdev, bool is_mdp5
dev_dbg(&pdev->dev, "mapped mdss address space @%pK\n", msm_mdss->mmio);
- ret = msm_mdss_parse_data_bus_icc_path(&pdev->dev, msm_mdss);
- if (ret)
return ERR_PTR(ret);- ret = devm_add_action_or_reset(&pdev->dev, msm_mdss_put_icc_path, msm_mdss);
- if (ret)
return ERR_PTR(ret);- if (is_mdp5) ret = mdp5_mdss_parse_clock(pdev, &msm_mdss->clocks); else
dri-devel@lists.freedesktop.org
-
Abhinav Kumar -
Dmitry Baryshkov -
Douglas Anderson -
Jessica Zhang -
Stephen Boyd