Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 238b13f..32b1917 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3665,7 +3665,7 @@ int r100_ring_test(struct radeon_device *rdev, struct radeon_ring *ring) if (i < rdev->usec_timeout) { DRM_INFO("ring test succeeded in %d usecs\n", i); } else { - DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n", + DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X), try radeon.agpmode=1?\n", scratch, tmp); r = -EINVAL; }
On 28.11.2015 21:58, Pavel Machek wrote:
Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
NAK, the ring test can fail for any number of reasons and the agpmode is actually rather unlikely to be the cause.
Regards, Christian.
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 238b13f..32b1917 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3665,7 +3665,7 @@ int r100_ring_test(struct radeon_device *rdev, struct radeon_ring *ring) if (i < rdev->usec_timeout) { DRM_INFO("ring test succeeded in %d usecs\n", i); } else {
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n",
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X), try radeon.agpmode=1?\n", scratch, tmp);
On Sun 2015-11-29 20:48:53, Christian König wrote:
On 28.11.2015 21:58, Pavel Machek wrote:
Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
NAK, the ring test can fail for any number of reasons and the agpmode is actually rather unlikely to be the cause.
Well, when I asked on the list "why this is happened" I got "umm, noone knows" response that was not exactly helpful. And then someone told me about agpmode.
If you know about the reasons it can fail, could you list them near the DRM_ERROR, at least as a comment?
Thanks, Pavel
Regards, Christian.
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 238b13f..32b1917 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3665,7 +3665,7 @@ int r100_ring_test(struct radeon_device *rdev, struct radeon_ring *ring) if (i < rdev->usec_timeout) { DRM_INFO("ring test succeeded in %d usecs\n", i); } else {
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n",
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X), try radeon.agpmode=1?\n", scratch, tmp);
On 29.11.2015 23:22, Pavel Machek wrote:
On Sun 2015-11-29 20:48:53, Christian König wrote:
On 28.11.2015 21:58, Pavel Machek wrote:
Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
NAK, the ring test can fail for any number of reasons and the agpmode is actually rather unlikely to be the cause.
Well, when I asked on the list "why this is happened" I got "umm, noone knows" response that was not exactly helpful. And then someone told me about agpmode.
If you know about the reasons it can fail, could you list them near the DRM_ERROR, at least as a comment?
Well as I said, that could be any number of reasons. Some of them even completely unrelated to the driver itself.
E.g. BIOS setting, faulty hardware, problems with the writeback etc... There is really not a list you could give here.
Lowering the agpmode usually helps more to prevent random corruptions and problems under load.
Regards, Christian.
Thanks, Pavel
Regards, Christian.
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 238b13f..32b1917 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3665,7 +3665,7 @@ int r100_ring_test(struct radeon_device *rdev, struct radeon_ring *ring) if (i < rdev->usec_timeout) { DRM_INFO("ring test succeeded in %d usecs\n", i); } else {
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n",
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X), try radeon.agpmode=1?\n", scratch, tmp);
On Mon 2015-11-30 09:39:54, Christian König wrote:
On 29.11.2015 23:22, Pavel Machek wrote:
On Sun 2015-11-29 20:48:53, Christian König wrote:
On 28.11.2015 21:58, Pavel Machek wrote:
Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
NAK, the ring test can fail for any number of reasons and the agpmode is actually rather unlikely to be the cause.
Well, when I asked on the list "why this is happened" I got "umm, noone knows" response that was not exactly helpful. And then someone told me about agpmode.
If you know about the reasons it can fail, could you list them near the DRM_ERROR, at least as a comment?
Well as I said, that could be any number of reasons. Some of them even completely unrelated to the driver itself.
E.g. BIOS setting, faulty hardware, problems with the writeback etc... There is really not a list you could give here.
Lowering the agpmode usually helps more to prevent random corruptions and problems under load.
Take a look at
http://www.gossamer-threads.com/lists/linux/kernel/2197183
. I had a problem, you did not know how to debug it, but it already happened to pebolle at tiscali ... and yes, it was agpmode. That problem is clearly more common then you realize... So this should go in.
Pavel
--- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3665,7 +3665,7 @@ int r100_ring_test(struct radeon_device *rdev, struct radeon_ring *ring) if (i < rdev->usec_timeout) { DRM_INFO("ring test succeeded in %d usecs\n", i); } else {
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n",
DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X), try radeon.agpmode=1?\n", scratch, tmp);
On 01.12.2015 19:01, Pavel Machek wrote:
On Mon 2015-11-30 09:39:54, Christian König wrote:
On 29.11.2015 23:22, Pavel Machek wrote:
On Sun 2015-11-29 20:48:53, Christian König wrote:
On 28.11.2015 21:58, Pavel Machek wrote:
Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
NAK, the ring test can fail for any number of reasons and the agpmode is actually rather unlikely to be the cause.
Well, when I asked on the list "why this is happened" I got "umm, noone knows" response that was not exactly helpful. And then someone told me about agpmode.
If you know about the reasons it can fail, could you list them near the DRM_ERROR, at least as a comment?
Well as I said, that could be any number of reasons. Some of them even completely unrelated to the driver itself.
E.g. BIOS setting, faulty hardware, problems with the writeback etc... There is really not a list you could give here.
Lowering the agpmode usually helps more to prevent random corruptions and problems under load.
Take a look at
http://www.gossamer-threads.com/lists/linux/kernel/2197183
. I had a problem, you did not know how to debug it, but it already happened to pebolle at tiscali ... and yes, it was agpmode. That problem is clearly more common then you realize... So this should go in.
I agree with Christian, but at the very least, agpmode must not be mentioned if AGP isn't being used in the first place, i.e. either the GPU isn't AGP or is being forced to PCI(e) mode.
On 02.12.2015 04:14, Michel Dänzer wrote:
On 01.12.2015 19:01, Pavel Machek wrote:
On Mon 2015-11-30 09:39:54, Christian König wrote:
On 29.11.2015 23:22, Pavel Machek wrote:
On Sun 2015-11-29 20:48:53, Christian König wrote:
On 28.11.2015 21:58, Pavel Machek wrote:
Ring test failure is often caused by too high agpmode. Tell the user what to try.
Signed-off-by: Pavel Machek pavel@ucw.cz
NAK, the ring test can fail for any number of reasons and the agpmode is actually rather unlikely to be the cause.
Well, when I asked on the list "why this is happened" I got "umm, noone knows" response that was not exactly helpful. And then someone told me about agpmode.
If you know about the reasons it can fail, could you list them near the DRM_ERROR, at least as a comment?
Well as I said, that could be any number of reasons. Some of them even completely unrelated to the driver itself.
E.g. BIOS setting, faulty hardware, problems with the writeback etc... There is really not a list you could give here.
Lowering the agpmode usually helps more to prevent random corruptions and problems under load.
Take a look at
http://www.gossamer-threads.com/lists/linux/kernel/2197183
. I had a problem, you did not know how to debug it, but it already happened to pebolle at tiscali ... and yes, it was agpmode. That problem is clearly more common then you realize... So this should go in.
I agree with Christian, but at the very least, agpmode must not be mentioned if AGP isn't being used in the first place, i.e. either the GPU isn't AGP or is being forced to PCI(e) mode.
Well maybe to explain the background, r100_ring_test() is used for a whole bunch of different hardware generations.
Most of them doesn't even have AGP, so mentioning this here would be even confusion for the majority of users.
Regards, Christian.
dri-devel@lists.freedesktop.org
-
Christian König -
Michel Dänzer -
Pavel Machek