[PATCH v3 1/2] dt-bindings: display: panel: Add binding document for Leadtek LTK050H3146W
From: Heiko Stuebner heiko.stuebner@theobroma-systems.com
The LTK050H3146W is a 5.0" 720x1280 DSI display.
Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com --- Sam said he had applied this to drm-misc-next already, but I can't see it so far, so included for completenes.
.../display/panel/leadtek,ltk050h3146w.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml new file mode 100644 index 000000000000..a372bdc5bde1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner heiko.stuebner@theobroma-systems.com + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - leadtek,ltk050h3146w + - leadtek,ltk050h3146w-a2 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk050h3146w"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +...
From: Heiko Stuebner heiko.stuebner@theobroma-systems.com
The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants with essentially the same name, LTK050H3146W and LTK050H3146W-A2.
They differ in their init sequence and mode details.
changes in v2: - add display variants changes in v3: - fixed indentation and artifacts found by Sam
Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com --- drivers/gpu/drm/panel/Kconfig | 11 + drivers/gpu/drm/panel/Makefile | 1 + .../drm/panel/panel-leadtek-ltk050h3146w.c | 691 ++++++++++++++++++ 3 files changed, 703 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index a1723c1b5fbf..d56258b9fcaf 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -137,6 +137,17 @@ config DRM_PANEL_KINGDISPLAY_KD097D04 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight.
+config DRM_PANEL_LEADTEK_LTK050H3146W + tristate "Leadtek LTK050H3146W panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Leadtek LTK050H3146W + TFT-LCD modules. The panel has a 720x1280 resolution and uses + 24 bit RGB per pixel. It provides a MIPI DSI interface to + the host and has a built-in LED backlight. + config DRM_PANEL_LEADTEK_LTK500HD1829 tristate "Leadtek LTK500HD1829 panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 96a883cd6630..2335a1e32ae0 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o +obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c new file mode 100644 index 000000000000..5a7a31c8513e --- /dev/null +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +struct ltk050h3146w_cmd { + char cmd; + char data; +}; + +struct ltk050h3146w; +struct ltk050h3146w_desc { + const struct drm_display_mode *mode; + int (*init)(struct ltk050h3146w *ctx); +}; + +struct ltk050h3146w { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator *vci; + struct regulator *iovcc; + const struct ltk050h3146w_desc *panel_desc; + bool prepared; +}; + +static const struct ltk050h3146w_cmd page1_cmds[] = { + { 0x22, 0x0A }, /* BGR SS GS */ + { 0x31, 0x00 }, /* column inversion */ + { 0x53, 0xA2 }, /* VCOM1 */ + { 0x55, 0xA2 }, /* VCOM2 */ + { 0x50, 0x81 }, /* VREG1OUT=5V */ + { 0x51, 0x85 }, /* VREG2OUT=-5V */ + { 0x62, 0x0D }, /* EQT Time setting */ +/* + * The vendor init selected page 1 here _again_ + * Is this supposed to be page 2? + */ + { 0xA0, 0x00 }, + { 0xA1, 0x1A }, + { 0xA2, 0x28 }, + { 0xA3, 0x13 }, + { 0xA4, 0x16 }, + { 0xA5, 0x29 }, + { 0xA6, 0x1D }, + { 0xA7, 0x1E }, + { 0xA8, 0x84 }, + { 0xA9, 0x1C }, + { 0xAA, 0x28 }, + { 0xAB, 0x75 }, + { 0xAC, 0x1A }, + { 0xAD, 0x19 }, + { 0xAE, 0x4D }, + { 0xAF, 0x22 }, + { 0xB0, 0x28 }, + { 0xB1, 0x54 }, + { 0xB2, 0x66 }, + { 0xB3, 0x39 }, + { 0xC0, 0x00 }, + { 0xC1, 0x1A }, + { 0xC2, 0x28 }, + { 0xC3, 0x13 }, + { 0xC4, 0x16 }, + { 0xC5, 0x29 }, + { 0xC6, 0x1D }, + { 0xC7, 0x1E }, + { 0xC8, 0x84 }, + { 0xC9, 0x1C }, + { 0xCA, 0x28 }, + { 0xCB, 0x75 }, + { 0xCC, 0x1A }, + { 0xCD, 0x19 }, + { 0xCE, 0x4D }, + { 0xCF, 0x22 }, + { 0xD0, 0x28 }, + { 0xD1, 0x54 }, + { 0xD2, 0x66 }, + { 0xD3, 0x39 }, +}; + +static const struct ltk050h3146w_cmd page3_cmds[] = { + { 0x01, 0x00 }, + { 0x02, 0x00 }, + { 0x03, 0x73 }, + { 0x04, 0x00 }, + { 0x05, 0x00 }, + { 0x06, 0x0a }, + { 0x07, 0x00 }, + { 0x08, 0x00 }, + { 0x09, 0x01 }, + { 0x0a, 0x00 }, + { 0x0b, 0x00 }, + { 0x0c, 0x01 }, + { 0x0d, 0x00 }, + { 0x0e, 0x00 }, + { 0x0f, 0x1d }, + { 0x10, 0x1d }, + { 0x11, 0x00 }, + { 0x12, 0x00 }, + { 0x13, 0x00 }, + { 0x14, 0x00 }, + { 0x15, 0x00 }, + { 0x16, 0x00 }, + { 0x17, 0x00 }, + { 0x18, 0x00 }, + { 0x19, 0x00 }, + { 0x1a, 0x00 }, + { 0x1b, 0x00 }, + { 0x1c, 0x00 }, + { 0x1d, 0x00 }, + { 0x1e, 0x40 }, + { 0x1f, 0x80 }, + { 0x20, 0x06 }, + { 0x21, 0x02 }, + { 0x22, 0x00 }, + { 0x23, 0x00 }, + { 0x24, 0x00 }, + { 0x25, 0x00 }, + { 0x26, 0x00 }, + { 0x27, 0x00 }, + { 0x28, 0x33 }, + { 0x29, 0x03 }, + { 0x2a, 0x00 }, + { 0x2b, 0x00 }, + { 0x2c, 0x00 }, + { 0x2d, 0x00 }, + { 0x2e, 0x00 }, + { 0x2f, 0x00 }, + { 0x30, 0x00 }, + { 0x31, 0x00 }, + { 0x32, 0x00 }, + { 0x33, 0x00 }, + { 0x34, 0x04 }, + { 0x35, 0x00 }, + { 0x36, 0x00 }, + { 0x37, 0x00 }, + { 0x38, 0x3C }, + { 0x39, 0x35 }, + { 0x3A, 0x01 }, + { 0x3B, 0x40 }, + { 0x3C, 0x00 }, + { 0x3D, 0x01 }, + { 0x3E, 0x00 }, + { 0x3F, 0x00 }, + { 0x40, 0x00 }, + { 0x41, 0x88 }, + { 0x42, 0x00 }, + { 0x43, 0x00 }, + { 0x44, 0x1F }, + { 0x50, 0x01 }, + { 0x51, 0x23 }, + { 0x52, 0x45 }, + { 0x53, 0x67 }, + { 0x54, 0x89 }, + { 0x55, 0xab }, + { 0x56, 0x01 }, + { 0x57, 0x23 }, + { 0x58, 0x45 }, + { 0x59, 0x67 }, + { 0x5a, 0x89 }, + { 0x5b, 0xab }, + { 0x5c, 0xcd }, + { 0x5d, 0xef }, + { 0x5e, 0x11 }, + { 0x5f, 0x01 }, + { 0x60, 0x00 }, + { 0x61, 0x15 }, + { 0x62, 0x14 }, + { 0x63, 0x0E }, + { 0x64, 0x0F }, + { 0x65, 0x0C }, + { 0x66, 0x0D }, + { 0x67, 0x06 }, + { 0x68, 0x02 }, + { 0x69, 0x07 }, + { 0x6a, 0x02 }, + { 0x6b, 0x02 }, + { 0x6c, 0x02 }, + { 0x6d, 0x02 }, + { 0x6e, 0x02 }, + { 0x6f, 0x02 }, + { 0x70, 0x02 }, + { 0x71, 0x02 }, + { 0x72, 0x02 }, + { 0x73, 0x02 }, + { 0x74, 0x02 }, + { 0x75, 0x01 }, + { 0x76, 0x00 }, + { 0x77, 0x14 }, + { 0x78, 0x15 }, + { 0x79, 0x0E }, + { 0x7a, 0x0F }, + { 0x7b, 0x0C }, + { 0x7c, 0x0D }, + { 0x7d, 0x06 }, + { 0x7e, 0x02 }, + { 0x7f, 0x07 }, + { 0x80, 0x02 }, + { 0x81, 0x02 }, + { 0x82, 0x02 }, + { 0x83, 0x02 }, + { 0x84, 0x02 }, + { 0x85, 0x02 }, + { 0x86, 0x02 }, + { 0x87, 0x02 }, + { 0x88, 0x02 }, + { 0x89, 0x02 }, + { 0x8A, 0x02 }, +}; + +static const struct ltk050h3146w_cmd page4_cmds[] = { + { 0x70, 0x00 }, + { 0x71, 0x00 }, + { 0x82, 0x0F }, /* VGH_MOD clamp level=15v */ + { 0x84, 0x0F }, /* VGH clamp level 15V */ + { 0x85, 0x0D }, /* VGL clamp level (-10V) */ + { 0x32, 0xAC }, + { 0x8C, 0x80 }, + { 0x3C, 0xF5 }, + { 0xB5, 0x07 }, /* GAMMA OP */ + { 0x31, 0x45 }, /* SOURCE OP */ + { 0x3A, 0x24 }, /* PS_EN OFF */ + { 0x88, 0x33 }, /* LVD */ +}; + +static inline +struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel) +{ + return container_of(panel, struct ltk050h3146w, panel); +} + +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + /* + * Init sequence was supplied by the panel vendor without much + * documentation. + */ + dsi_dcs_write_seq(dsi, 0xdf, 0x93, 0x65, 0xf8); + dsi_dcs_write_seq(dsi, 0xb0, 0x01, 0x03, 0x02, 0x00, 0x64, 0x06, + 0x01); + dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0xb5); + dsi_dcs_write_seq(dsi, 0xb3, 0x00, 0xb5); + dsi_dcs_write_seq(dsi, 0xb7, 0x00, 0xbf, 0x00, 0x00, 0xbf, 0x00); + + dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0xc4, 0x23, 0x07); + dsi_dcs_write_seq(dsi, 0xbb, 0x02, 0x01, 0x24, 0x00, 0x28, 0x0f, + 0x28, 0x04, 0xcc, 0xcc, 0xcc); + dsi_dcs_write_seq(dsi, 0xbc, 0x0f, 0x04); + dsi_dcs_write_seq(dsi, 0xbe, 0x1e, 0xf2); + dsi_dcs_write_seq(dsi, 0xc0, 0x26, 0x03); + dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x12); + dsi_dcs_write_seq(dsi, 0xc3, 0x04, 0x02, 0x02, 0x76, 0x01, 0x80, + 0x80); + dsi_dcs_write_seq(dsi, 0xc4, 0x24, 0x80, 0xb4, 0x81, 0x12, 0x0f, + 0x16, 0x00, 0x00); + dsi_dcs_write_seq(dsi, 0xc8, 0x7f, 0x72, 0x67, 0x5d, 0x5d, 0x50, + 0x56, 0x41, 0x59, 0x57, 0x55, 0x70, 0x5b, 0x5f, + 0x4f, 0x47, 0x38, 0x23, 0x08, 0x7f, 0x72, 0x67, + 0x5d, 0x5d, 0x50, 0x56, 0x41, 0x59, 0x57, 0x55, + 0x70, 0x5b, 0x5f, 0x4f, 0x47, 0x38, 0x23, 0x08); + dsi_dcs_write_seq(dsi, 0xd0, 0x1e, 0x1f, 0x57, 0x58, 0x48, 0x4a, + 0x44, 0x46, 0x40, 0x1f, 0x42, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f); + dsi_dcs_write_seq(dsi, 0xd1, 0x1e, 0x1f, 0x57, 0x58, 0x49, 0x4b, + 0x45, 0x47, 0x41, 0x1f, 0x43, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f); + dsi_dcs_write_seq(dsi, 0xd2, 0x1f, 0x1e, 0x17, 0x18, 0x07, 0x05, + 0x0b, 0x09, 0x03, 0x1f, 0x01, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f); + dsi_dcs_write_seq(dsi, 0xd3, 0x1f, 0x1e, 0x17, 0x18, 0x06, 0x04, + 0x0a, 0x08, 0x02, 0x1f, 0x00, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f); + dsi_dcs_write_seq(dsi, 0xd4, 0x00, 0x00, 0x00, 0x0c, 0x06, 0x20, + 0x01, 0x02, 0x00, 0x60, 0x15, 0xb0, 0x30, 0x03, + 0x04, 0x00, 0x60, 0x72, 0x0a, 0x00, 0x60, 0x08); + dsi_dcs_write_seq(dsi, 0xd5, 0x00, 0x06, 0x06, 0x00, 0x30, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xbc, 0x50, 0x00, 0x05, + 0x21, 0x00, 0x60); + dsi_dcs_write_seq(dsi, 0xdd, 0x2c, 0xa3, 0x00); + dsi_dcs_write_seq(dsi, 0xde, 0x02); + dsi_dcs_write_seq(dsi, 0xb2, 0x32, 0x1c); + dsi_dcs_write_seq(dsi, 0xb7, 0x3b, 0x70, 0x00, 0x04); + dsi_dcs_write_seq(dsi, 0xc1, 0x11); + dsi_dcs_write_seq(dsi, 0xbb, 0x21, 0x22, 0x23, 0x24, 0x36, 0x37); + dsi_dcs_write_seq(dsi, 0xc2, 0x20, 0x38, 0x1e, 0x84); + dsi_dcs_write_seq(dsi, 0xde, 0x00); + + ret = mipi_dsi_dcs_set_tear_on(dsi, 1); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n", + ret); + return ret; + } + + msleep(60); + + return 0; +} + +static const struct drm_display_mode ltk050h3146w_mode = { + .hdisplay = 720, + .hsync_start = 720 + 42, + .hsync_end = 720 + 42 + 8, + .htotal = 720 + 42 + 8 + 42, + .vdisplay = 1280, + .vsync_start = 1280 + 12, + .vsync_end = 1280 + 12 + 4, + .vtotal = 1280 + 12 + 4 + 18, + .clock = 64018, + .width_mm = 62, + .height_mm = 110, +}; + +static const struct ltk050h3146w_desc ltk050h3146w_data = { + .mode = <k050h3146w_mode, + .init = ltk050h3146w_init_sequence, +}; + +static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + u8 d[3] = { 0x98, 0x81, page }; + + return mipi_dsi_dcs_write(dsi, 0xff, d, ARRAY_SIZE(d)); +} + +static int ltk050h3146w_a2_write_page(struct ltk050h3146w *ctx, int page, + const struct ltk050h3146w_cmd *cmds, + int num) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int i, ret; + + ret = ltk050h3146w_a2_select_page(ctx, page); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to select page %d: %d\n", + page, ret); + return ret; + } + + for (i = 0; i < num; i++) { + ret = mipi_dsi_generic_write(dsi, &cmds[i], + sizeof(struct ltk050h3146w_cmd)); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "failed to write page %d init cmds: %d\n", + page, ret); + return ret; + } + } + + return 0; +} + +static int ltk050h3146w_a2_init_sequence(struct ltk050h3146w *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + /* + * Init sequence was supplied by the panel vendor without much + * documentation. + */ + ret = ltk050h3146w_a2_write_page(ctx, 3, page3_cmds, + ARRAY_SIZE(page3_cmds)); + if (ret < 0) + return ret; + + ret = ltk050h3146w_a2_write_page(ctx, 4, page4_cmds, + ARRAY_SIZE(page4_cmds)); + if (ret < 0) + return ret; + + ret = ltk050h3146w_a2_write_page(ctx, 1, page1_cmds, + ARRAY_SIZE(page1_cmds)); + if (ret < 0) + return ret; + + ret = ltk050h3146w_a2_select_page(ctx, 0); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to select page 0: %d\n", ret); + return ret; + } + + /* vendor code called this without param, where there should be one */ + ret = mipi_dsi_dcs_set_tear_on(dsi, 0); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n", + ret); + return ret; + } + + msleep(60); + + return 0; +} + +static const struct drm_display_mode ltk050h3146w_a2_mode = { + .hdisplay = 720, + .hsync_start = 720 + 42, + .hsync_end = 720 + 42 + 10, + .htotal = 720 + 42 + 10 + 60, + .vdisplay = 1280, + .vsync_start = 1280 + 18, + .vsync_end = 1280 + 18 + 4, + .vtotal = 1280 + 18 + 4 + 12, + .clock = 65595, + .width_mm = 62, + .height_mm = 110, +}; + +static const struct ltk050h3146w_desc ltk050h3146w_a2_data = { + .mode = <k050h3146w_a2_mode, + .init = ltk050h3146w_a2_init_sequence, +}; + +static int ltk050h3146w_unprepare(struct drm_panel *panel) +{ + struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (!ctx->prepared) + return 0; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n", + ret); + return ret; + } + + mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n", + ret); + return ret; + } + + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vci); + + ctx->prepared = false; + + return 0; +} + +static int ltk050h3146w_prepare(struct drm_panel *panel) +{ + struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (ctx->prepared) + return 0; + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n"); + ret = regulator_enable(ctx->vci); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable vci supply: %d\n", ret); + return ret; + } + ret = regulator_enable(ctx->iovcc); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable iovcc supply: %d\n", ret); + goto disable_vci; + } + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + msleep(20); + + ret = ctx->panel_desc->init(ctx); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", + ret); + goto disable_iovcc; + } + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret); + goto disable_iovcc; + } + + /* T9: 120ms */ + msleep(120); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret); + goto disable_iovcc; + } + + msleep(50); + + ctx->prepared = true; + + return 0; + +disable_iovcc: + regulator_disable(ctx->iovcc); +disable_vci: + regulator_disable(ctx->vci); + return ret; +} + +static int ltk050h3146w_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs ltk050h3146w_funcs = { + .unprepare = ltk050h3146w_unprepare, + .prepare = ltk050h3146w_prepare, + .get_modes = ltk050h3146w_get_modes, +}; + +static int ltk050h3146w_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct ltk050h3146w *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->panel_desc = of_device_get_match_data(dev); + if (!ctx->panel_desc) + return -EINVAL; + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + DRM_DEV_ERROR(dev, "cannot get reset gpio\n"); + return PTR_ERR(ctx->reset_gpio); + } + + ctx->vci = devm_regulator_get(dev, "vci"); + if (IS_ERR(ctx->vci)) { + ret = PTR_ERR(ctx->vci); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request vci regulator: %d\n", + ret); + return ret; + } + + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + ret = PTR_ERR(ctx->iovcc); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request iovcc regulator: %d\n", + ret); + return ret; + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET; + + drm_panel_init(&ctx->panel, &dsi->dev, <k050h3146w_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void ltk050h3146w_shutdown(struct mipi_dsi_device *dsi) +{ + struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = drm_panel_unprepare(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n", + ret); + + ret = drm_panel_disable(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n", + ret); +} + +static int ltk050h3146w_remove(struct mipi_dsi_device *dsi) +{ + struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ltk050h3146w_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n", + ret); + + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id ltk050h3146w_of_match[] = { + { + .compatible = "leadtek,ltk050h3146w", + .data = <k050h3146w_data, + }, + { + .compatible = "leadtek,ltk050h3146w-a2", + .data = <k050h3146w_a2_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match); + +static struct mipi_dsi_driver ltk050h3146w_driver = { + .driver = { + .name = "panel-leadtek-ltk050h3146w", + .of_match_table = ltk050h3146w_of_match, + }, + .probe = ltk050h3146w_probe, + .remove = ltk050h3146w_remove, + .shutdown = ltk050h3146w_shutdown, +}; +module_mipi_dsi_driver(ltk050h3146w_driver); + +MODULE_AUTHOR("Heiko Stuebner heiko.stuebner@theobroma-systems.com"); +MODULE_DESCRIPTION("DRM driver for Leadtek LTK050H3146W MIPI DSI panel"); +MODULE_LICENSE("GPL v2");
dri-devel@lists.freedesktop.org
-
Heiko Stuebner -
Sam Ravnborg