Hi,
I do realize more work needs to be done to get a clean hotunplug solution, however I need your comments to make sure that I'm going in the right direction.
So far I have no good idea how to resolve pm_runtime_get_sync() failures on outstanding device file close after successfull driver unbind.
Thanks, Janusz
Janusz Krzysztofik (1): drm/i915: Split off pci_driver.remove() tail to drm_driver.release()
drivers/gpu/drm/i915/i915_drv.c | 17 +++++++++++++---- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 10 +++++++++- 3 files changed, 23 insertions(+), 5 deletions(-)
In order to support driver hot unbind, some cleanup operations, now performed on PCI driver remove, must be called later, after all device file descriptors are closed.
Split out those operations from the tail of pci_driver.remove() callback and put them into drm_driver.release() which is called as soon as all references to the driver are put. As a result, those cleanups will be now run on last drm_dev_put(), either still called from pci_driver.remove() if all device file descriptors are already closed, or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik janusz.krzysztofik@linux.intel.com --- drivers/gpu/drm/i915/i915_drv.c | 17 +++++++++++++---- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 10 +++++++++- 3 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 83d2eb9e74cb..8be69f84eb6d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -738,6 +738,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
cleanup_gem: i915_gem_suspend(dev_priv); + i915_gem_fini_hw(dev_priv); i915_gem_fini(dev_priv); cleanup_modeset: intel_modeset_cleanup(dev); @@ -1685,7 +1686,6 @@ static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv) pci_disable_msi(pdev);
pm_qos_remove_request(&dev_priv->pm_qos); - i915_ggtt_cleanup_hw(dev_priv); }
/** @@ -1909,6 +1909,7 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
out_cleanup_hw: i915_driver_cleanup_hw(dev_priv); + i915_ggtt_cleanup_hw(dev_priv); out_cleanup_mmio: i915_driver_cleanup_mmio(dev_priv); out_runtime_pm_put: @@ -1960,21 +1961,29 @@ void i915_driver_unload(struct drm_device *dev) cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work); i915_reset_error_state(dev_priv);
- i915_gem_fini(dev_priv); + i915_gem_fini_hw(dev_priv);
intel_power_domains_fini_hw(dev_priv);
i915_driver_cleanup_hw(dev_priv); - i915_driver_cleanup_mmio(dev_priv);
enable_rpm_wakeref_asserts(dev_priv); - intel_runtime_pm_cleanup(dev_priv); }
static void i915_driver_release(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev);
+ disable_rpm_wakeref_asserts(dev_priv); + + i915_gem_fini(dev_priv); + + i915_ggtt_cleanup_hw(dev_priv); + i915_driver_cleanup_mmio(dev_priv); + + enable_rpm_wakeref_asserts(dev_priv); + intel_runtime_pm_cleanup(dev_priv); + i915_driver_cleanup_early(dev_priv); i915_driver_destroy(dev_priv); } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a2664ea1395b..d08e7bd83544 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3047,6 +3047,7 @@ void i915_gem_init_mmio(struct drm_i915_private *i915); int __must_check i915_gem_init(struct drm_i915_private *dev_priv); int __must_check i915_gem_init_hw(struct drm_i915_private *dev_priv); void i915_gem_init_swizzling(struct drm_i915_private *dev_priv); +void i915_gem_fini_hw(struct drm_i915_private *dev_priv); void i915_gem_fini(struct drm_i915_private *dev_priv); int i915_gem_wait_for_idle(struct drm_i915_private *dev_priv, unsigned int flags, long timeout); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 7cafd5612f71..c6a8e665a6ba 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4667,7 +4667,7 @@ int i915_gem_init(struct drm_i915_private *dev_priv) return ret; }
-void i915_gem_fini(struct drm_i915_private *dev_priv) +void i915_gem_fini_hw(struct drm_i915_private *dev_priv) { GEM_BUG_ON(dev_priv->gt.awake);
@@ -4681,6 +4681,14 @@ void i915_gem_fini(struct drm_i915_private *dev_priv) intel_uc_fini_hw(dev_priv); intel_uc_fini(dev_priv); intel_engines_cleanup(dev_priv); + mutex_unlock(&dev_priv->drm.struct_mutex); + + i915_gem_drain_freed_objects(dev_priv); +} + +void i915_gem_fini(struct drm_i915_private *dev_priv) +{ + mutex_lock(&dev_priv->drm.struct_mutex); i915_gem_contexts_fini(dev_priv); i915_gem_fini_scratch(dev_priv); mutex_unlock(&dev_priv->drm.struct_mutex);
Quoting Janusz Krzysztofik (2019-05-30 10:24:26)
In order to support driver hot unbind, some cleanup operations, now performed on PCI driver remove, must be called later, after all device file descriptors are closed.
Split out those operations from the tail of pci_driver.remove() callback and put them into drm_driver.release() which is called as soon as all references to the driver are put. As a result, those cleanups will be now run on last drm_dev_put(), either still called from pci_driver.remove() if all device file descriptors are already closed, or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik janusz.krzysztofik@linux.intel.com
drivers/gpu/drm/i915/i915_drv.c | 17 +++++++++++++---- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 10 +++++++++- 3 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 83d2eb9e74cb..8be69f84eb6d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -738,6 +738,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
cleanup_gem: i915_gem_suspend(dev_priv);
i915_gem_fini_hw(dev_priv); i915_gem_fini(dev_priv);cleanup_modeset: intel_modeset_cleanup(dev); @@ -1685,7 +1686,6 @@ static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv) pci_disable_msi(pdev);
pm_qos_remove_request(&dev_priv->pm_qos);
i915_ggtt_cleanup_hw(dev_priv);}
/** @@ -1909,6 +1909,7 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
Would it make sense to rename load/unload from the legacy drm stubs over to match the pci entry points?
out_cleanup_hw: i915_driver_cleanup_hw(dev_priv);
i915_ggtt_cleanup_hw(dev_priv);out_cleanup_mmio: i915_driver_cleanup_mmio(dev_priv); out_runtime_pm_put: @@ -1960,21 +1961,29 @@ void i915_driver_unload(struct drm_device *dev) cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work); i915_reset_error_state(dev_priv);
i915_gem_fini(dev_priv);
i915_gem_fini_hw(dev_priv); intel_power_domains_fini_hw(dev_priv); i915_driver_cleanup_hw(dev_priv);
i915_driver_cleanup_mmio(dev_priv); enable_rpm_wakeref_asserts(dev_priv);intel_runtime_pm_cleanup(dev_priv);}
static void i915_driver_release(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev);
disable_rpm_wakeref_asserts(dev_priv);i915_gem_fini(dev_priv);i915_ggtt_cleanup_hw(dev_priv);i915_driver_cleanup_mmio(dev_priv);enable_rpm_wakeref_asserts(dev_priv);intel_runtime_pm_cleanup(dev_priv);
We should really propagate the release nomenclature down and replace our mixed fini/cleanup. Consistency is helpful when trying to work out which phase the code is in.
i915_driver_cleanup_early(dev_priv); i915_driver_destroy(dev_priv);} diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a2664ea1395b..d08e7bd83544 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3047,6 +3047,7 @@ void i915_gem_init_mmio(struct drm_i915_private *i915); int __must_check i915_gem_init(struct drm_i915_private *dev_priv); int __must_check i915_gem_init_hw(struct drm_i915_private *dev_priv); void i915_gem_init_swizzling(struct drm_i915_private *dev_priv); +void i915_gem_fini_hw(struct drm_i915_private *dev_priv); void i915_gem_fini(struct drm_i915_private *dev_priv); int i915_gem_wait_for_idle(struct drm_i915_private *dev_priv, unsigned int flags, long timeout); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 7cafd5612f71..c6a8e665a6ba 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4667,7 +4667,7 @@ int i915_gem_init(struct drm_i915_private *dev_priv) return ret; }
-void i915_gem_fini(struct drm_i915_private *dev_priv) +void i915_gem_fini_hw(struct drm_i915_private *dev_priv) { GEM_BUG_ON(dev_priv->gt.awake);
@@ -4681,6 +4681,14 @@ void i915_gem_fini(struct drm_i915_private *dev_priv) intel_uc_fini_hw(dev_priv); intel_uc_fini(dev_priv);
intel_engines_cleanup(dev_priv);
intel_engines_cleanup -> i915_gem_fini -- that is in principle just freeing structs. One side effect it does have is to make all engines unavailable (but it doesn't update the engine_mask so the inconsistency might catch us out if it is not one of the last cleanup actions).
intel_uc_fini() is a bit of a mixed bag. It looks like it flushes runtime state, so preferrably that flush should be moved to the _fini_hw so that _fini is pure cleanup. So for the time being, best to leave intel_uc_fini() here.
mutex_unlock(&dev_priv->drm.struct_mutex);i915_gem_drain_freed_objects(dev_priv);+}
+void i915_gem_fini(struct drm_i915_private *dev_priv) +{
mutex_lock(&dev_priv->drm.struct_mutex); i915_gem_contexts_fini(dev_priv); i915_gem_fini_scratch(dev_priv); mutex_unlock(&dev_priv->drm.struct_mutex);
That split looks sensible to me, with the consideration as to whether defer intel_engines_cleanup() as well, Reviewed-by: Chris Wilson chris@chris-wilson.co.uk -Chris
On Thu, May 30, 2019 at 10:40:09AM +0100, Chris Wilson wrote:
Quoting Janusz Krzysztofik (2019-05-30 10:24:26)
In order to support driver hot unbind, some cleanup operations, now performed on PCI driver remove, must be called later, after all device file descriptors are closed.
Split out those operations from the tail of pci_driver.remove() callback and put them into drm_driver.release() which is called as soon as all references to the driver are put. As a result, those cleanups will be now run on last drm_dev_put(), either still called from pci_driver.remove() if all device file descriptors are already closed, or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik janusz.krzysztofik@linux.intel.com
drivers/gpu/drm/i915/i915_drv.c | 17 +++++++++++++---- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 10 +++++++++- 3 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 83d2eb9e74cb..8be69f84eb6d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -738,6 +738,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
cleanup_gem: i915_gem_suspend(dev_priv);
i915_gem_fini_hw(dev_priv); i915_gem_fini(dev_priv);cleanup_modeset: intel_modeset_cleanup(dev); @@ -1685,7 +1686,6 @@ static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv) pci_disable_msi(pdev);
pm_qos_remove_request(&dev_priv->pm_qos);
i915_ggtt_cleanup_hw(dev_priv);}
/** @@ -1909,6 +1909,7 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
Would it make sense to rename load/unload from the legacy drm stubs over to match the pci entry points?
+1 on that rename, load/unload is really terribly confusing and has horrible semantics in the dri1 shadow attach world ... -Daniel
out_cleanup_hw: i915_driver_cleanup_hw(dev_priv);
i915_ggtt_cleanup_hw(dev_priv);out_cleanup_mmio: i915_driver_cleanup_mmio(dev_priv); out_runtime_pm_put: @@ -1960,21 +1961,29 @@ void i915_driver_unload(struct drm_device *dev) cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work); i915_reset_error_state(dev_priv);
i915_gem_fini(dev_priv);
i915_gem_fini_hw(dev_priv); intel_power_domains_fini_hw(dev_priv); i915_driver_cleanup_hw(dev_priv);
i915_driver_cleanup_mmio(dev_priv); enable_rpm_wakeref_asserts(dev_priv);intel_runtime_pm_cleanup(dev_priv);}
static void i915_driver_release(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev);
disable_rpm_wakeref_asserts(dev_priv);i915_gem_fini(dev_priv);i915_ggtt_cleanup_hw(dev_priv);i915_driver_cleanup_mmio(dev_priv);enable_rpm_wakeref_asserts(dev_priv);intel_runtime_pm_cleanup(dev_priv);We should really propagate the release nomenclature down and replace our mixed fini/cleanup. Consistency is helpful when trying to work out which phase the code is in.
i915_driver_cleanup_early(dev_priv); i915_driver_destroy(dev_priv);} diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a2664ea1395b..d08e7bd83544 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3047,6 +3047,7 @@ void i915_gem_init_mmio(struct drm_i915_private *i915); int __must_check i915_gem_init(struct drm_i915_private *dev_priv); int __must_check i915_gem_init_hw(struct drm_i915_private *dev_priv); void i915_gem_init_swizzling(struct drm_i915_private *dev_priv); +void i915_gem_fini_hw(struct drm_i915_private *dev_priv); void i915_gem_fini(struct drm_i915_private *dev_priv); int i915_gem_wait_for_idle(struct drm_i915_private *dev_priv, unsigned int flags, long timeout); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 7cafd5612f71..c6a8e665a6ba 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4667,7 +4667,7 @@ int i915_gem_init(struct drm_i915_private *dev_priv) return ret; }
-void i915_gem_fini(struct drm_i915_private *dev_priv) +void i915_gem_fini_hw(struct drm_i915_private *dev_priv) { GEM_BUG_ON(dev_priv->gt.awake);
@@ -4681,6 +4681,14 @@ void i915_gem_fini(struct drm_i915_private *dev_priv) intel_uc_fini_hw(dev_priv); intel_uc_fini(dev_priv);
intel_engines_cleanup(dev_priv);intel_engines_cleanup -> i915_gem_fini -- that is in principle just freeing structs. One side effect it does have is to make all engines unavailable (but it doesn't update the engine_mask so the inconsistency might catch us out if it is not one of the last cleanup actions).
intel_uc_fini() is a bit of a mixed bag. It looks like it flushes runtime state, so preferrably that flush should be moved to the _fini_hw so that _fini is pure cleanup. So for the time being, best to leave intel_uc_fini() here.
mutex_unlock(&dev_priv->drm.struct_mutex);i915_gem_drain_freed_objects(dev_priv);+}
+void i915_gem_fini(struct drm_i915_private *dev_priv) +{
mutex_lock(&dev_priv->drm.struct_mutex); i915_gem_contexts_fini(dev_priv); i915_gem_fini_scratch(dev_priv); mutex_unlock(&dev_priv->drm.struct_mutex);That split looks sensible to me, with the consideration as to whether defer intel_engines_cleanup() as well, Reviewed-by: Chris Wilson chris@chris-wilson.co.uk -Chris
On Monday, June 3, 2019 9:28:18 AM CEST Daniel Vetter wrote:
On Thu, May 30, 2019 at 10:40:09AM +0100, Chris Wilson wrote:
Quoting Janusz Krzysztofik (2019-05-30 10:24:26)
In order to support driver hot unbind, some cleanup operations, now performed on PCI driver remove, must be called later, after all device file descriptors are closed.
Split out those operations from the tail of pci_driver.remove() callback and put them into drm_driver.release() which is called as soon as all references to the driver are put. As a result, those cleanups will be now run on last drm_dev_put(), either still called from pci_driver.remove() if all device file descriptors are already closed, or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik janusz.krzysztofik@linux.intel.com
drivers/gpu/drm/i915/i915_drv.c | 17 +++++++++++++---- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 10 +++++++++- 3 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/
i915_drv.c
index 83d2eb9e74cb..8be69f84eb6d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -738,6 +738,7 @@ static int i915_load_modeset_init(struct drm_device
*dev)
cleanup_gem: i915_gem_suspend(dev_priv);
i915_gem_fini_hw(dev_priv); i915_gem_fini(dev_priv);cleanup_modeset: intel_modeset_cleanup(dev); @@ -1685,7 +1686,6 @@ static void i915_driver_cleanup_hw(struct
drm_i915_private *dev_priv)
pci_disable_msi(pdev); pm_qos_remove_request(&dev_priv->pm_qos);
i915_ggtt_cleanup_hw(dev_priv);}
/** @@ -1909,6 +1909,7 @@ int i915_driver_load(struct pci_dev *pdev, const
struct pci_device_id *ent)
Would it make sense to rename load/unload from the legacy drm stubs over to match the pci entry points?
+1 on that rename, load/unload is really terribly confusing and has horrible semantics in the dri1 shadow attach world ... -Daniel
I've not responded to that comment, sorry, but I agree too. I've assumed that's a candidate for a separate patch or series. I'm willing to work on that as time permits.
Thanks, Janusz
out_cleanup_hw: i915_driver_cleanup_hw(dev_priv);
i915_ggtt_cleanup_hw(dev_priv);out_cleanup_mmio: i915_driver_cleanup_mmio(dev_priv); out_runtime_pm_put: @@ -1960,21 +1961,29 @@ void i915_driver_unload(struct drm_device *dev) cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work); i915_reset_error_state(dev_priv);
i915_gem_fini(dev_priv);
i915_gem_fini_hw(dev_priv); intel_power_domains_fini_hw(dev_priv); i915_driver_cleanup_hw(dev_priv);
i915_driver_cleanup_mmio(dev_priv); enable_rpm_wakeref_asserts(dev_priv);intel_runtime_pm_cleanup(dev_priv);}
static void i915_driver_release(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev);
disable_rpm_wakeref_asserts(dev_priv);i915_gem_fini(dev_priv);i915_ggtt_cleanup_hw(dev_priv);i915_driver_cleanup_mmio(dev_priv);enable_rpm_wakeref_asserts(dev_priv);intel_runtime_pm_cleanup(dev_priv);We should really propagate the release nomenclature down and replace our mixed fini/cleanup. Consistency is helpful when trying to work out which phase the code is in.
i915_driver_cleanup_early(dev_priv); i915_driver_destroy(dev_priv);} diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/
i915_drv.h
index a2664ea1395b..d08e7bd83544 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3047,6 +3047,7 @@ void i915_gem_init_mmio(struct drm_i915_private
*i915);
int __must_check i915_gem_init(struct drm_i915_private *dev_priv); int __must_check i915_gem_init_hw(struct drm_i915_private *dev_priv); void i915_gem_init_swizzling(struct drm_i915_private *dev_priv); +void i915_gem_fini_hw(struct drm_i915_private *dev_priv); void i915_gem_fini(struct drm_i915_private *dev_priv); int i915_gem_wait_for_idle(struct drm_i915_private *dev_priv, unsigned int flags, long timeout); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/
i915_gem.c
index 7cafd5612f71..c6a8e665a6ba 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4667,7 +4667,7 @@ int i915_gem_init(struct drm_i915_private
*dev_priv)
return ret;}
-void i915_gem_fini(struct drm_i915_private *dev_priv) +void i915_gem_fini_hw(struct drm_i915_private *dev_priv) { GEM_BUG_ON(dev_priv->gt.awake);
@@ -4681,6 +4681,14 @@ void i915_gem_fini(struct drm_i915_private
*dev_priv)
intel_uc_fini_hw(dev_priv); intel_uc_fini(dev_priv);intel_engines_cleanup(dev_priv);intel_engines_cleanup -> i915_gem_fini -- that is in principle just freeing structs. One side effect it does have is to make all engines unavailable (but it doesn't update the engine_mask so the inconsistency might catch us out if it is not one of the last cleanup actions).
intel_uc_fini() is a bit of a mixed bag. It looks like it flushes runtime state, so preferrably that flush should be moved to the _fini_hw so that _fini is pure cleanup. So for the time being, best to leave intel_uc_fini() here.
mutex_unlock(&dev_priv->drm.struct_mutex);i915_gem_drain_freed_objects(dev_priv);+}
+void i915_gem_fini(struct drm_i915_private *dev_priv) +{
mutex_lock(&dev_priv->drm.struct_mutex); i915_gem_contexts_fini(dev_priv); i915_gem_fini_scratch(dev_priv); mutex_unlock(&dev_priv->drm.struct_mutex);That split looks sensible to me, with the consideration as to whether defer intel_engines_cleanup() as well, Reviewed-by: Chris Wilson chris@chris-wilson.co.uk -Chris
dri-devel@lists.freedesktop.org
-
Chris Wilson -
Daniel Vetter -
Janusz Krzysztofik