On Tue, 24 Jul 2018 15:36:01 +0200 Boris Brezillon boris.brezillon@bootlin.com wrote:

This is needed to ensure ->is_unity is correct when the plane was previously configured to output a multi-planar format with scaling enabled, and is then being reconfigured to output a uniplanar format.

Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com

Applied to drm-misc-fixes.

---

drivers/gpu/drm/vc4/vc4_plane.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 9d7a36f148cf..cfb50fedfa2b 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -320,6 +320,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_state->x_scaling[0] = VC4_SCALING_TPZ; if (vc4_state->y_scaling[0] == VC4_SCALING_NONE) vc4_state->y_scaling[0] = VC4_SCALING_TPZ;

• } else {

• vc4_state->x_scaling[1] = VC4_SCALING_NONE;
  

• vc4_state->y_scaling[1] = VC4_SCALING_NONE;
  

  }

  vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&