The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com --- drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS + select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm. diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index abbc1ddbf27f..8a7556655581 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -51,6 +51,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(struct device_node *np) +{ + struct regmap *scfg; + + scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg"); + if (IS_ERR(scfg)) + return PTR_ERR(scfg); + + /* + * For simplicity, enable the PIXCLK unconditionally. It might + * be possible to disable the clock in PM or on unload as a future + * improvement. + */ + return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN, + SCFG_PIXCLKCR_PXCEN); +} + static void fsl_dcu_irq_uninstall(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -70,6 +87,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
+ if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) { + ret = fsl_dcu_scfg_config_ls1021a(fsl_dev->np); + if (ret < 0) { + dev_err(dev->dev, "failed to enable pixclk\n"); + goto done; + } + } + ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n"); diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31) + #define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10
Hi Matthias,
On 2020-08-20 12:58, Matthias Schiffer wrote:
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Hm, this seems a rather ad-hoc access to SCFG from the DCU. We do support a pixel clock in the device tree bindings of fsl-dcu, so ideally we should enable the pixel clock through the clock framework.
On the other hand, I guess that would mean adding a clock driver to flip a single bit, which seems a bit excessive too.
I'd like a second opinion on that. Adding clk framework maintainers.
-- Stefan
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com
drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS
- select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index abbc1ddbf27f..8a7556655581 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -51,6 +51,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(struct device_node *np) +{
- struct regmap *scfg;
- scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
- if (IS_ERR(scfg))
return PTR_ERR(scfg);- /*
* For simplicity, enable the PIXCLK unconditionally. It might* be possible to disable the clock in PM or on unload as a future* improvement.*/- return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
SCFG_PIXCLKCR_PXCEN);+}
static void fsl_dcu_irq_uninstall(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -70,6 +87,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
- if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
ret = fsl_dcu_scfg_config_ls1021a(fsl_dev->np);if (ret < 0) {dev_err(dev->dev, "failed to enable pixclk\n");goto done;}- }
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31)
#define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10
On Fri, 2020-08-21 at 15:41 +0200, Stefan Agner wrote:
Hi Matthias,
On 2020-08-20 12:58, Matthias Schiffer wrote:
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Hm, this seems a rather ad-hoc access to SCFG from the DCU. We do support a pixel clock in the device tree bindings of fsl-dcu, so ideally we should enable the pixel clock through the clock framework.
On the other hand, I guess that would mean adding a clock driver to flip a single bit, which seems a bit excessive too.
I'd like a second opinion on that. Adding clk framework maintainers.
-- Stefan
How do we proceed with this patch?
Kind regards, Matthias
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com
drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS
- select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index abbc1ddbf27f..8a7556655581 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -51,6 +51,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(struct device_node *np) +{
- struct regmap *scfg;
- scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
- if (IS_ERR(scfg))
return PTR_ERR(scfg);- /*
* For simplicity, enable the PIXCLK unconditionally. It might* be possible to disable the clock in PM or on unload as a future* improvement.*/- return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
SCFG_PIXCLKCR_PXCEN);+}
static void fsl_dcu_irq_uninstall(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -70,6 +87,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
- if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
ret = fsl_dcu_scfg_config_ls1021a(fsl_dev->np);if (ret < 0) {dev_err(dev->dev, "failed to enable pixclk\n");goto done;}- }
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31)
#define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10
On Fri, 2020-08-21 at 15:41 +0200, Stefan Agner wrote:
Hi Matthias,
On 2020-08-20 12:58, Matthias Schiffer wrote:
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Hm, this seems a rather ad-hoc access to SCFG from the DCU. We do support a pixel clock in the device tree bindings of fsl-dcu, so ideally we should enable the pixel clock through the clock framework.
On the other hand, I guess that would mean adding a clock driver to flip a single bit, which seems a bit excessive too.
I'd like a second opinion on that. Adding clk framework maintainers.
It's been a while, and nobody else has given their opinion. How should we proceed with this patch?
Matthias
-- Stefan
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com
drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS
- select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index abbc1ddbf27f..8a7556655581 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -51,6 +51,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(struct device_node *np) +{
- struct regmap *scfg;
- scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
- if (IS_ERR(scfg))
return PTR_ERR(scfg);- /*
* For simplicity, enable the PIXCLK unconditionally. It might* be possible to disable the clock in PM or on unload as a future* improvement.*/- return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
SCFG_PIXCLKCR_PXCEN);+}
static void fsl_dcu_irq_uninstall(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -70,6 +87,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
- if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
ret = fsl_dcu_scfg_config_ls1021a(fsl_dev->np);if (ret < 0) {dev_err(dev->dev, "failed to enable pixclk\n");goto done;}- }
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31)
#define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10
On Thu, 2021-09-16 at 14:50 +0200, Matthias Schiffer wrote:
On Fri, 2020-08-21 at 15:41 +0200, Stefan Agner wrote:
Hi Matthias,
On 2020-08-20 12:58, Matthias Schiffer wrote:
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Hm, this seems a rather ad-hoc access to SCFG from the DCU. We do support a pixel clock in the device tree bindings of fsl-dcu, so ideally we should enable the pixel clock through the clock framework.
On the other hand, I guess that would mean adding a clock driver to flip a single bit, which seems a bit excessive too.
I'd like a second opinion on that. Adding clk framework maintainers.
It's been a while, and nobody else has given their opinion. How should we proceed with this patch?
Matthias
This patch is still blocked on a maintainer decision. Should I send a rebased version of the current solution, or do we want to have a proper clk driver to flip this bit?
-- Stefan
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com
drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS
- select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index abbc1ddbf27f..8a7556655581 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -51,6 +51,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(struct device_node *np) +{
- struct regmap *scfg;
- scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
- if (IS_ERR(scfg))
return PTR_ERR(scfg);- /*
* For simplicity, enable the PIXCLK unconditionally. It might* be possible to disable the clock in PM or on unload as a future* improvement.*/- return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
SCFG_PIXCLKCR_PXCEN);+}
static void fsl_dcu_irq_uninstall(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -70,6 +87,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
- if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
ret = fsl_dcu_scfg_config_ls1021a(fsl_dev->np);if (ret < 0) {dev_err(dev->dev, "failed to enable pixclk\n");goto done;}- }
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31)
#define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10
On 2021-10-05 14:35, Matthias Schiffer wrote:
On Thu, 2021-09-16 at 14:50 +0200, Matthias Schiffer wrote:
On Fri, 2020-08-21 at 15:41 +0200, Stefan Agner wrote:
Hi Matthias,
On 2020-08-20 12:58, Matthias Schiffer wrote:
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Hm, this seems a rather ad-hoc access to SCFG from the DCU. We do support a pixel clock in the device tree bindings of fsl-dcu, so ideally we should enable the pixel clock through the clock framework.
On the other hand, I guess that would mean adding a clock driver to flip a single bit, which seems a bit excessive too.
I'd like a second opinion on that. Adding clk framework maintainers.
It's been a while, and nobody else has given their opinion. How should we proceed with this patch?
Matthias
This patch is still blocked on a maintainer decision. Should I send a rebased version of the current solution, or do we want to have a proper clk driver to flip this bit?
The clock maintainers haven't stated an opinion. I've seen similar hacks for reset and other bits in other places, so I guess it's fine.
Can you also drop the np argument from fsl_dcu_scfg_config_ls1021a(), it seems unnecessary.
-- Stefan
-- Stefan
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com
drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS
- select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index abbc1ddbf27f..8a7556655581 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -51,6 +51,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(struct device_node *np) +{
- struct regmap *scfg;
- scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
- if (IS_ERR(scfg))
return PTR_ERR(scfg);- /*
* For simplicity, enable the PIXCLK unconditionally. It might* be possible to disable the clock in PM or on unload as a future* improvement.*/- return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
SCFG_PIXCLKCR_PXCEN);+}
static void fsl_dcu_irq_uninstall(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -70,6 +87,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
- if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
ret = fsl_dcu_scfg_config_ls1021a(fsl_dev->np);if (ret < 0) {dev_err(dev->dev, "failed to enable pixclk\n");goto done;}- }
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31)
#define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10
dri-devel@lists.freedesktop.org
-
Matthias Schiffer -
Stefan Agner